patch-2.4.26 linux-2.4.26/arch/ppc/platforms/ibmstb4.h

• Lines: 286
• Date: 2004-04-14 06:05:27.000000000 -0700
• Orig file: linux-2.4.25/arch/ppc/platforms/ibmstb4.h
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.25/arch/ppc/platforms/ibmstb4.h linux-2.4.26/arch/ppc/platforms/ibmstb4.h
@@ -0,0 +1,285 @@
+/*
+ * ibmstb4.h
+ *
+ *	This was dirived from the ibm405gp.h and other previus works in ppc4xx.h
+ *
+ *      Current maintainer
+ *      Armin Kuster akuster@mvista.com
+ *      DEC, 2001
+ *
+ *
+ * Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *	Version 1.0 (01/10/10) - A. Kuster
+ *	Initial version	
+ *
+ *	Version 1.1 02/01/17 - A. Kuster
+ *	moved common offsets to ibm405.h
+ *
+ *	Version 1.2 02/22/02 - A. Kuster
+ *	Added UIC and
+ *	Added early serial boot #define support - David G.
+ *	fixed __BOOTER__ 
+ *
+ *	Version 1.3 03/29/02 - Armin
+ *	Added i2c & usb ocp support
+ *
+ *	Version 1.4 04/30/02 - Armin
+ *		Added IIC_PORT_DFNS macros
+ *	Version 1.5 - 05/05/02 _ armin
+ *		removed IIC_PORT now using core_ocp[]
+ *
+ *	Version 1.6 07/22/02 - Armin
+ *	added default power managment setting
+ *
+ *	
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_IBMSTB4_H__
+#define __ASM_IBMSTB4_H__
+
+#include <linux/config.h>
+#include <platforms/ibm_ocp.h>
+
+/* serial port defines */
+#define STB04xxx_IO_BASE	((uint)0xe0000000)
+#define PPC4xx_PCI_IO_ADDR	STB04xxx_IO_BASE
+#define PPC4xx_ONB_IO_PADDR	STB04xxx_IO_BASE
+#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
+#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
+
+/*
+ * map STB04xxx internal i/o address (0x400x00xx) to an address
+ * which is below the 2GB limit...
+ *
+ * 4000 000x	uart1		-> 0xe000 000x
+ * 4001 00xx	ppu
+ * 4002 00xx	smart card
+ * 4003 000x	iic
+ * 4004 000x	uart0
+ * 4005 0xxx	timer
+ * 4006 00xx	gpio
+ * 4007 00xx	smart card
+ * 400b 000x	iic
+ * 400c 000x	scp
+ * 400d 000x	modem
+ * 400e 000x	uart2
+*/
+#define STB04xxx_MAP_IO_ADDR(a)	(((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
+
+#define RS_TABLE_SIZE		3
+#define UART0_INT		20
+
+#ifdef __BOOTER__
+#define UART0_IO_BASE		0x40040000
+#else
+#define UART0_IO_BASE		0xe0040000
+#endif
+
+#define UART1_INT		21
+
+#ifdef __BOOTER__
+#define UART1_IO_BASE		0x40000000
+#else
+#define UART1_IO_BASE		0xe0000000
+#endif
+
+#define UART2_INT		31
+#ifdef __BOOTER__
+#define UART2_IO_BASE		0x400e0000
+#else
+#define UART2_IO_BASE		0xe00e0000
+#endif
+
+#define IDE0_BASE	0x400F0000
+#define IDE0_SIZE	0x200
+#define IDE0_IRQ	25
+#define IIC0_BASE	0x40030000
+#define IIC1_BASE	0x400b0000
+#define OPB0_BASE	0x40000000
+#define GPIO0_BASE	0x40060000
+
+#define USB0_IRQ	18
+#define USB0_BASE	STB04xxx_MAP_IO_ADDR(0x40010000)
+#define USB0_EXTENT 4096
+
+#define IIC_NUMS 2
+#define UART_NUMS	3
+#define IIC0_IRQ	9
+#define IIC1_IRQ	10
+#define IIC_OWN		0x55
+#define IIC_CLOCK	50
+
+#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
+
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: (u8 *)UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(1)		\
+	STD_UART_OP(0)		\
+	STD_UART_OP(2)
+#endif
+
+#if defined(CONFIG_UART0_TTYS2)
+#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(2)		\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)
+#endif
+
+#define DCRN_BE_BASE		0x090
+#define DCRN_DMA0_BASE		0x0C0
+#define DCRN_DMA1_BASE		0x0C8
+#define DCRN_DMA2_BASE		0x0D0
+#define DCRN_DMA3_BASE		0x0D8
+#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
+#define DCRN_DMASR_BASE		0x0E0
+#define DCRN_PLB0_BASE		0x054
+#define DCRN_PLB1_BASE		0x064
+#define DCRN_POB0_BASE		0x0B0
+#define DCRN_SCCR_BASE		0x120
+#define DCRN_UIC0_BASE		0x040
+#define DCRN_BE_BASE		0x090
+#define DCRN_DMA0_BASE		0x0C0
+#define DCRN_DMA1_BASE		0x0C8
+#define DCRN_DMA2_BASE		0x0D0
+#define DCRN_DMA3_BASE		0x0D8
+#define DCRN_CIC_BASE 		0x030
+#define DCRN_DMASR_BASE		0x0E0
+#define DCRN_EBIMC_BASE		0x070
+#define DCRN_DCRX_BASE		0x020
+#define DCRN_CPMFR_BASE		0x102
+#define DCRN_SCCR_BASE		0x120
+#define UIC0 DCRN_UIC0_BASE
+
+#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
+#define IBM_CPM_USB0	0x40000000	/* IEEE-1284 */
+#define IBM_CPM_IIC1	0x20000000	/* IIC 1 interface */
+#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
+#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
+#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
+#define IBM_CPM_SDRAM1	0x02000000	/* SDRAM 1 memory controller */
+#define IBM_CPM_DMA	0x01000000	/* DMA controller */
+#define IBM_CPM_DMA1	0x00800000	/* reserved */
+#define IBM_CPM_XPT1	0x00400000	/* reserved */
+#define IBM_CPM_XPT2	0x00200000	/* reserved */
+#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
+#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
+#define IBM_CPM_EPI	0x00040000	/* DCR Extension */
+#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
+#define IBM_CPM_VID	0x00010000	/* reserved */
+#define IBM_CPM_SC1	0x00008000	/* Smart Card 1 */
+#define IBM_CPM_USBSDRA	0x00004000	/* SDRAM 0 memory controller */
+#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
+#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
+#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
+#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
+#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
+#define IBM_CPM_TMRCLK	0x00000100	/* CPU timers */
+#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
+#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
+#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
+#define IBM_CPM_UART2	0x00000008	/* Serial Control Port */
+#define IBM_CPM_DDIO	0x00000004	/* Descrambler */
+#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
+
+#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
+			| IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
+			| IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
+			| IBM_CPM_XPT27 | IBM_CPM_UIC )
+
+#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
+#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
+/* DCRN_BESR */
+#define BESR_DSES	0x80000000	/* Data-Side Error Status */
+#define BESR_DMES	0x40000000	/* DMA Error Status */
+#define BESR_RWS	0x20000000	/* Read/Write Status */
+#define BESR_ETMASK	0x1C000000	/* Error Type */
+#define ET_PROT		0
+#define ET_PARITY	1
+#define ET_NCFG		2
+#define ET_BUSERR	4
+#define ET_BUSTO	6
+
+#define CHR1_CETE	0x00800000	/* CPU external timer enable */
+#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
+
+#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
+#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
+#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
+#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
+#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
+#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
+#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
+#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
+#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
+
+#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
+#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
+#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
+#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
+#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
+#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
+#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
+#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
+
+#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
+#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
+#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
+#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
+#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
+#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
+#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
+#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
+#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
+#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
+#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
+#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
+#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
+#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
+#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
+#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
+#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
+#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
+#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
+
+#include <platforms/ibm405.h>
+
+#endif				/* __ASM_IBMSTB4_H__ */
+#endif				/* __KERNEL__ */