Packages changed:
  branding-openSUSE (84.87.20200106 -> 84.87.20210910)
  elfutils
  elfutils-debuginfod
  fwupd (1.7.5 -> 1.7.6)
  pkcs11-helper (1.27.0 -> 1.28.0)
  python-ipython (8.0.1 -> 8.1.0)
  rubygem-rspec (3.10.0 -> 3.11.0)
  rubygem-rspec-core (3.10.1 -> 3.11.0)
  rubygem-rspec-expectations (3.10.2 -> 3.11.0)
  rubygem-rspec-mocks (3.10.2 -> 3.11.0)
  rubygem-rspec-support (3.10.3 -> 3.11.0)
  virt-viewer
  yast2-installation (4.4.44 -> 4.4.45)

=== Details ===

==== branding-openSUSE ====
Version update (84.87.20200106 -> 84.87.20210910)
Subpackages: grub2-branding-openSUSE libreoffice-branding-openSUSE plymouth-branding-openSUSE wallpaper-branding-openSUSE yast2-qt-branding-openSUSE

- Update branding-tumbleweed.zip from https://github.com/openSUSE/branding.git
  Drop plymouth-branding-openSUSE's watermark link add a
  configuration function to plymouth theme configuration to avoid
  logo lost which cause plymouth to fail.
- Update branding-openSUSE.spec: resort plymouth-branding-openSUSE
  install and build dependence to avoid plymouth fall to terminal
  mode in some scenario(bsc#1189613).
- Drop systemd icons, since distribution-logos took that over
- Change the name of the font used in the installer

==== elfutils ====
Subpackages: elfutils-lang libasm1 libdw1 libelf1

- Add support for zstd, needed to inspect kernel modules (bsc#1196510)

==== elfutils-debuginfod ====

- Add support for zstd, needed to inspect kernel modules (bsc#1196510)

==== fwupd ====
Version update (1.7.5 -> 1.7.6)
Subpackages: fwupd-lang libfwupd2 libfwupdplugin5 typelib-1_0-Fwupd-2_0

- Update to version 1.7.6:
  * This release adds the following features:
    + Add a flag for UEFI devices that never want a capsule header
    auto-added
    + Add a flag to indicate the device has a signed or unsigned
    payload
    + Add a plugin to set a GPIO pin for the duration of an update
    + Add a simple plugin to enumerate (but not update) SCSI
    hardware
    + Add two more instance IDs to the MTD devices
    + Add X-BaseboardManagementController as an update category
    + Allow assigning issues to devices for known high priority
    problems
    + Parse the MTD firmware version using the defined GType
  * This release fixes the following bugs:
    + Check the IFD sections have non-zero data length to fix a
    critical warning
    + Modify the AT retry behavior to fix getting the firmware
    branch
    + Do not run fwupd-refresh automatically in containers
    + Do not show a warning if the TPM eventlog does not exist
    + Do not show TSS2 warning messages by default
    + Fix a critical warning when loading an empty TPM eventlog
    item
    + Fix a logic error when adding the community warning in
    fwupdmgr
    + Fix loading flashrom devices in coreboot mode
    + Fix the error handling when updating USB4 retimers
    + Show the user when devices are not updatable due to inhibits
    + Skip probing the Dell DA300 device to avoid a warning
    + Try harder to convert to a version into a correct semver
    + Use multiple checksums when there are no provided artifacts
  * This release adds support for the following hardware:
    + HP M2xfd monitors
    + Star Lite Mk III

==== pkcs11-helper ====
Version update (1.27.0 -> 1.28.0)
Subpackages: libpkcs11-helper1

- update to 1.28.0:
  * build and OpenSSL compatibility fixes
  * certificate: add methods accept full mechanism
  * core: load provider library as private
  * add API to support adding properties
  * core: add PKCS11H_PROVIDER_PROPERTY_PROVIDER_DESTRUCT_HOOK
  * session: respect login required token flag
  * certificate: respect always authenticate flag

==== python-ipython ====
Version update (8.0.1 -> 8.1.0)

- specfile:
  * removed patch: skip-network-test.patch (included upstream)
  * removed patch: ipython-pr13371-py310-oserror.patch (included upstream)
  * removed patch: ipython-pr13466-display.patch (included upstream)
  * removed patch: ipython-pr13282-py310-inspect.patch (fixed upstream)
- update to version 8.1.0:
  * Misc and multiple fixes around quotation auto-closing. It is now
    disabled by default. Run with
    TerminalInteractiveShell.auto_match=True to re-enabled
  * Require pygments>=2.4.0 :ghpull:`13459`, this was implicit in the
    code, but is now explicit in setup.cfg/setup.py
  * Docs improvement of core.magic_arguments examples. :ghpull:`13433`
  * Multi-line edit executes too early with await. :ghpull:`13424`
  * black is back as an optional dependency, and autoformatting
    disabled by default until some fixes are implemented (black
    improperly reformat magics). :ghpull:`13471` Additionally the
    ability to use yapf as a code reformatter has been added
    :ghpull:`13528` . You can use
    TerminalInteractiveShell.autoformatter="black",
    TerminalInteractiveShell.autoformatter="yapf" to re-enable auto
    formating with black, or switch to yapf.
  * Fix and issue where display was not defined.
  * Auto suggestions are now configurable. Currently only
    AutoSuggestFromHistory (default) and None. new provider
    contribution welcomed. :ghpull:`13475`
  * multiple packaging/testing improvement to simplify downstream
    packaging (xfail with reasons, try to not access network...).
  * Update deprecation. InteractiveShell.magic internal method has
    been deprecated for many years but did not emit a warning until
    now.
  * internal appended_to_syspath context manager has been deprecated.
  * fix an issue with symlinks in virtualenv :ghpull:`13537`
  * Fix an issue with vim mode, where cursor would not be reset on
    exit :ghpull:`13472`
  * ipython directive now remove only known pseudo-decorators
    :ghpull:`13532`
  * IPython/lib/security which used to be used for jupyter notebook
    has been removed.
  * Fix an issue where async with would execute on new
    lines. :ghpull:`13436`

==== rubygem-rspec ====
Version update (3.10.0 -> 3.11.0)

updated to version 3.11.0
  no changelog found

==== rubygem-rspec-core ====
Version update (3.10.1 -> 3.11.0)

updated to version 3.11.0
  see installed Changelog.md
  [#]## Development
  [Full Changelog](http://github.com/rspec/rspec-core/compare/v3.11.0...3-11-maintenance)
  [#]## 3.11.0 / 2022-02-09
  [Full Changelog](http://github.com/rspec/rspec-core/compare/v3.10.2...v3.11.0)
  Enhancements:
  * Improve pluralisation of words ending with `s` (like process). (Joshua Pinter, #2779)
  * Add ordering by file modification time (most recent first). (Matheus Richard, #2778)
  * Add `to_s` to reserved names for #let and #subject. (Nick Fl�ckiger, #2886)
  * Introduce `RSpec.current_scope` to expose the current scope in which
    RSpec is executing. e.g. `:before_example_hook`, `:example` etc. (@odinhb, #2895)
  * Add named bold colours as options for custom colours. (#2913, #2914)
  * Warn when (but not prevent) a `SystemExit` occurs. (Jared Beck, #2926)
  [#]## 3.10.2 / 2022-01-27
  [Full Changelog](http://github.com/rspec/rspec-core/compare/v3.10.1...v3.10.2)
  Bug fixes:
  * Ensure bisect communication uses consistent encoding. (Mike Jarema, #2852)
  * Fix exception presenter when the root cause exception has nil backtrace.
    (Zinovyev Ivan, #2903)
  * Fix `inspect` output of `RSpec::Core::Example::Procsy` to namespace correctly.
    (Keiko Kaneko, #2915)
  * Ensure formatters not exposing `#output` will not crash duplicate check.
    (@niceking, #2916)

==== rubygem-rspec-expectations ====
Version update (3.10.2 -> 3.11.0)

updated to version 3.11.0
  see installed Changelog.md
  Enhancements:
  * Return `true` from `aggregate_failures` when no exception occurs. (Jon Rowe, #1225)
  Deprecations:
  * Print a deprecation message when using the implicit block expectation syntax.
    (Phil Pirozhkov, #1139)

==== rubygem-rspec-mocks ====
Version update (3.10.2 -> 3.11.0)

updated to version 3.11.0
  see installed Changelog.md

==== rubygem-rspec-support ====
Version update (3.10.3 -> 3.11.0)

updated to version 3.11.0
  see installed Changelog.md
  [#]## Development
  [Full Changelog](http://github.com/rspec/rspec-support/compare/v3.11.0...3-11-maintenance)
  [#]## 3.11.0 / 2022-02-09
  [Full Changelog](http://github.com/rspec/rspec-support/compare/v3.10.3...v3.11.0)
  No changes. Released to support other RSpec releases.

==== virt-viewer ====

- Fix build with meson 0.60 and newer.
  virtview-fix-build-with-meson-0.61.patch

==== yast2-installation ====
Version update (4.4.44 -> 4.4.45)

- Fixed the start of the VNC server during installation. Done by
  Joan Torres L�pez <joan.torres@suse.com> (bsc#1196201).
- 4.4.45