=pod



=head1 NAME

Embperl FAQ - embed Perl code in your HTML docs

=head1 CONTENTS

=over 4

=item L<"Downloading, Compiling & Installing">

=item L<"Common Problems">

=item L<"Common Questions">

=item L<"Escaping & Unescaping">

=item L<"Debugging">

=item L<"Customizing">

=item L<"Optimizing & Fine Tuning">

=item L<"Additional Help">

=back





=head1 Downloading, Compiling & Installing


For basics on downloading, compiling, and installing, please see the 
L<INSTALL/"INSTALLATION"> in the Embperl documentation. Please be sure
to load Embperl at server startup - if you do not, various problems may
result. An exception to that rule is when you have compiled mod_perl with
B<USE_DSO>. In this case you B<must not> load Embperl at server statup,
neither via an use in your startup.pl file, nor via PerlModule from
your httpd.conf.



=head2 Is there a binary distribution of Embperl for Unix?

No.


=head2 Is there a binary distribution of Embperl for Win32?

Win NT/95/98 binarys for Apache/perl/mod_perl/Embperl are
available from ftp://theoryx5.uwinnipeg.ca/pub/other/ . A
european mirror is at http://www.robert.cz/misc/ .


=head2 I want to run Embperl with mod_perl under Apache. In what order should I
do the compiling?

First mod_perl and Apache, then Embperl. 


=head2 I'm getting:

../apache_1.3.0/src/include/conf.h:916: regex.h: No such file or directory

Try compiling Embperl again, like this:

    make DEFS=-DUSE_HSREGEX


=head2 I'm trying to build HTML::Embperl, and while running 'make' i get:

cc: Internal compiler error: program cc1 got fatal signal 11
make: *** [epmain.o] Error 1

GCC croaking with signal 11 frequently indicates hardware problems.
See http://www.bitwizard.nl/sig11/


=head2 I have a lot of errors in 'make test' from mod_perl when using Embperl

Try recompiling Perl and all modules -- this can sometimes make those
annoying error messages disappear!

=head2 How can I prevent 'make test' from running some of the tests? 

For 
example, I don't allow CGI scripts, so 'make test' fails at CGI. How 
do I run just the other tests?

Try:

 $ make test TESTARGS="--help"
 # and for just offline and mod_perl:
 $ make test TESTARGS="-hoe"



=head2 Running 'make test' fails with an error message at loading of Embperl 
(even though mod_perl compiled and tested cleanly!)

see "I get symbol ap_* undefined/cannot resolve ap_*"

=head2 I get symbol ap_* undefined/cannot resolve ap_*

This can happen when symbols in the Apache binary can not be found or
are not being resolved correctly.

Some OS do this (for instance bsdos), and it can also happen if your
Apache binary is set to strip symbol information out from binaries. 

Try:

=over 4

=item 1.) make clean

=item 2.) perl Makefile.PL

NOTE: answer _no_ to mod_perl support. (This is important!)

=item 3.) make test

=back

If that works, it means that your installation of Embperl is OK,
but is having problems resolving symbols with Apache.

Try rebuilding Apache and mod_perl from scratch, and make sure
you do not strip symbols out of either.

On some systems/linker you need to tell the linker explicitly to
export such symbols. For example FreeBSD linker needs the 
C<-export-dynamic> option.

If you don't succeed with this approach, try statically linking
Embperl to Apache/mod_perl (please see the next question for
step-by-step instructions on how to do this).



=head2 How can I build a statically-linked copy of Embperl with mod_perl 
support?

=over 4

=item 1.) go to your mod_perl directory, change to src/modules/perl and edit the
Makefile so that it contains the line

    #STATIC_EXTS = Apache Apache::Constants HTML::Embperl

=item 2.) add a definition for EPDIR and change the ONJ= line so that it looks
like this:


EPDIR=/usr/msrc/embperl
OBJS=$(PERLSRC:.c=.o) $(EPDIR)/Embperl.o $(EPDIR)/epmain.o $(EPDIR)/epio.o
(EP DIR)/epeval.o $(EPDIR)/epcmd.o $(EPDIR)/epchar.o $(EPDIR)/eputil.o


=item 3.) go to the mod_perl directory and run

    perl Makefile.PL

=item 4.) go to the Embperl directory and do

    make clean
    perl Makefule.PL
    make

(to compile in mod_perl support)

=item 5.) go back to the mod_perl directory and remake Apache by typing

    make

Now you have successfully built a httpd with statically-linked Embperl.

NOTE: If you want to stop here, you can skip to step 11. and run a 'make
install' in the Embperl directory to finish.

But if you want to run Embperl tests and/or if you want to be able to use
Embperl in offline or "vanilla" CGI mode, we need to continue:

=item 6.) go back to the Embperl directory

=item 7.) backup the file test/conf/config.pl

=item 8.) now build Embperl again but _without_ mod_perl support

    make clean
    perl Makefile.PL
    make

=item 9.) restore your saved config.pl to test/conf/config.pl

(without this step, only the offline mode would be tested)

=item 10.) run 'make test' for Embperl

=item 11.) do 'make install' for Embperl

=back

NOTE: You should do it in this order, or it may not work.

NOTE: It seems to be necessary to load Embperl at server startup,
either by PerlModule or in a PerlScript. See next 
question on how to do this.



=head2 How do I load Embperl at server startup?

You can load Embperl at server startup by PerlModule or in a startup.pl:

=over 4

=item 1.) edit your  srm.conf file to read:

    PerlModule HTML::Embperl

=item 2.) edit your startup.pl file to read:

    use HTML::Embperl

=back

NOTE 1: Either of these approaches can often 'fix' SIGSEVs in any mod_perl
handler, not just Embperl.

NOTE 2: When mod_perl is compiled as loadable module (i.e. with USE_DSO)
you B<must not> load Embperl at server startup time!



=head2 make test fails with a SIGxxxx, how can I obtain a stack backtrace
from gdb?

The eaiest way is

        make install            -> if Embperl is installed, it's easier
        gdb perl                -> start the debugger with perl binary
        set args test.pl        -> set the arguments for perl
        r                       -> start the program

        -> Here you should receive the signal

        share                   -> makes sure all symbols are really loaded
        bt                      -> show the backtrace

To get some more information it would be a good idea to compile Embperl with
debugging infomation enabled. Therefor do

=head2 How do I build Embperl with debugging informations

=over 4

=item edit the Makefile

=item search for the line starting with 'CC = ' add the -g switch to the end of the line

=item search for the line starting with 'LDDFLAGS = ' add the -g switch to the end of the line

=item type make to build Embperl with debugging infomation

=back

now start the gdb as decribed before.



=head2  make test fails with SIGXFSZ

This may occur when the filesize limit for the account, either test
is running as or the test httpd, is too small. Embperl make test
generates a really large logfile! Yu must increase the filesize limit
for that accounts.




=head2 Embperl on SCO Unix

>From Red Plait

My OS is SCO Unix 3.2v4.2, Apache 1.3.4, perl 5.004_4, mod_perl 1.18 and
Embperl-1.1.1

I done following:

=over 4

=item 1)

I made HTML-Embperl-1.1.1 with no mod_perl support ( when I builded it
with mod_perl 1.18 I can`t link it because it don`t finds ap_XXX functions.
When I manually insert src/main/libmain.a from Apache 1.3.4 I got message
"Symbol main is multiple defined in  /src/main/libmain.a. and perlmain.o"
). Then I "make test" - all tests was O`k. After this I "make clean", "perl
Makefile.pl" with mod_perl support and "make install"

=item 2)

I installed mod_perl and "perl Makefile.PL", then "make"


=item 3)

because I have`nt dynamical loading ( very old and buggy OS ) I had to
manually change src/modules/perl/perlxsi.c to insert bootstraps function`s
and it`s invocations and also /src/Makefile to manually insert libXXX.a
libraries

=item In access.conf I insert code:

 PerlModule HTML::Embperl
 <Directory /my_dir>
  SetHandler perl-script
  PerlHandler HTML::Embperl::handler
 </Directory>

=back


=head2 Embperl and mod_perl on AIX 

You need at least mod_perl 1.22. For mod_perl 1.22 and higher Embperl
should compile out of the box on AIX. If you run into problems with
undefined symbols (like C<ap_*>) make sure you have the newest 
mod_perl version (as of this writing this is mod_perl 1.24_01).


=head2 Embperl does not write to the logfile, because of missing permissions
of the user Apache runs as.

The apache server is started as root, then set the effective uid to
user "www", who can then write to the embperl logfile (owned by root)
file handle
that is passed along.  However, if this log file handle is later
accidentally
closed, then reopen, the www user would have problem writing to it?


The reopen is only done when the logfile name changes. As log as you don't
change the name on the logfile, the logfile will stay open.

The problem (in this case) is, that Embperl init function ,(Init in epmain.c)
calls OpenLog will an second argument of zero. Which will only save the
filename. The log will actually opened on the first write to it (or at the
start of the first request). At this time your Apache has alreay switch to
user www. This is done to allow to change the logfile name before an
request, but after the init is already called (which is done when you or
Apache "use" the module)

The current solutions is to
write something to the log, before Apache changes it's user (i.e. in the
startup.pl)



=head2 Is it possible to install EmbPerl into a private directory on my Unix/Linux Internet Service Provider account of which I have no root privilege?

Like any other Perl module it can. Read "perldoc ExtUtils::MakeMaker",
to see which parameters are needed for Makefile.PL to change the installation
directory. Additionally, you have to change the @INC path to contain your 
private directory and possibly paths to other object files.

Here are the brief details:

B<Requirements>:

=over 4

=item *	At least Perl 5.004_04

=item *	cc or gcc (your isp must give you access to the gcc compiler)

=item *	URI

=item *	MIME::Base64 

=item *	HTML::Parser 

=item *	HTML::HeadParser 

=item *	Digest::MD5 

=item *	libnet 

=item *	libwww 

=item *	File::Spec (I believe you may have to install this too if you are using Perl 5.004_04 as it may not be a standard module)

=back

B<Direction>:

=over 4

=item *	Get your copy of EmbPerl (HTML-Embperl-x.x.tar.gz)


=item *	% tar -xvzf HTML-Embperl-x.x.tar.gz

=item *	% cd HTML-Embperl-x.x

=item *	% perl Makefile.PL PREFIX=/to/your/private/dir

=item *	% make

=item *	% make test

=item *	% make install

=back


Replace /to/your/private/dir with the path to the directory you want the  module to be placed in. Now preface your CGI scripts with something like  this:



[Alternative 1]

	#!/usr/bin/perl -wT
	use CGI::Carp qw( fatalsToBrowser ); #recommend using this to report errors on die or warn to browser
	
	use lib '/to/your/private/dir/lib'; #for FILE::Spec
	use lib '/to/your/private/dir/'; #to find Embperl
	use lib '/to/your/private/dir/i386-linux/auto/HTML/Embperl'; #to find Embperl compiled stuff
	
	#if for some very weird reason the above 'use lib' pragma directive doesn't work, see Alternative 2
	
	use HTML::Embperl;
	
	#your code below ...



[Alternative 2]

	#!/usr/bin/perl -wT
	use CGI::Carp qw( fatalsToBrowser ); #recommend using this to report errors on die or warn to browser
	
	BEGIN {
		unshift @INC, '/to/your/private/dir/lib'; #for FILE::Spec
		unshift @INC, '/to/your/private/dir/'; #to find Embperl
		unshift @INC, '/to/your/private/dir/i386-linux/auto/HTML/Embperl'; #to find Embperl compiled stuff
	}
	
	use HTML::Embperl;
	
	#your code below ...


When you make test, you may encounter superfluous warnings, you may want to change the test.pl that ships with EmbPerl from


	BEGIN 
	    { 
	    $fatal  = 1 ;

to

	BEGIN 
	    { 
	    unshift @INC, '/to/your/private/dir/lib';
	    $fatal  = 1 ;
	    ...

because the test.pl may not be able to find FILE::Spec if you have it installed on a private directory for Perl 5.004_04.

Do something similar to the important file embpcgi.pl as you do for all your CGI scripts, like modifying the @INC as shown above, to allow perl to find in particular the EmbPerl shared obj files...

And when you invoke your CGI scripts like so,

http://www.yourdomain.com/cgi-bin/embpcgi.pl/templateFiles/myNifty.epl

the script should work.



=head1 Common Problems


The most common problems of all involve Escaping and 
Unescaping.  They are so common, that an entire section on 
L<"Escaping & Unescaping"> is devoted to them.


=head2 When I use a module inside a Embperl page, it behaves weired
when the source changes.


Nothing weird here. Everything is well defined. Just let us try to
understand how I<Perl>, I<mod_perl> and I<Embperl> works together:

  "perldoc -f use" tells us:

  Imports some semantics into the current package from the named module,
  generally by aliasing certain subroutine or variable names into your
  package.  It is exactly equivalent to
 
     BEGIN { require Module; import Module LIST; }

  except that Module must be a bareword.

So what's important here for us is, that C<use> executes a C<require> and
this is always done before any other code is executed.

  "perldoc -f require" says (among other things):

  ..., demands that a library file be included if it hasn't already
  been included. 

and

  Note that the file will not be included twice under the same specified
  name.

So now we know (or should know) that I<mod_perl> starts the Perl interpreter
once when I<Apache> is started and the Perl interpreter is only terminated
when Apache is terminated. Out of these two things follows, that a module
that is loaded via C<use> or C<require> is only loaded once and will never
be reloaded, regardless if the source changes or not.

So far this is just standard Perl. Things get's a little bit more difficult
when running under mod_perl (only Unix), because Apache forks a set of child
processes as neccessary and from the moment they are forked, they run on their
own and don't know of each other. So if a module is loaded at server startup
time (before the fork), it is loaded in all childs (this can be used to save
memory, because the code will actually only reside once in memory), but when
the modul is loaded inside the child and the source changes, it could be
happen, that one child has loaded an ealier version and another child has
loaded a later version of that module, depending on the time the module
is actualy loaded by the child.

That explains, why sometimes it works and sometimes it doesn't, simply because
different childs has loaded different versions of the same module and when you
reload your page you hit different childs of Apache!

Now there is one point that is special to Embperl to add.
Since Embperl compiles every page in a different namespace,
a module that doesn't contains a C<package foo> statement is compiled in the
namespace of the page where it is first loaded.
Because Perl will not load the module a second time,
every other page will not see subs and vars that are defined in the loaded
module. This could be simply avoided by giving every module that should be
loaded via C<use>/C<require> an explicit namespace via the package statement.

So what can we do?

=over 4

=item * If a module change, simply restart Apache. That's works always.

=item * Use I<Apache::StatInc.> This will do a stat on every loaded module and compare
the modification time. If the source has changed the module is reloaded. This
works most times (but not all modules can be cleanly reloaded) and as the number
of loaded modules increase, your sever will slow down, because of the stat it
has to do for every module.

=item * Use C<do> instead of C<require>. C<do> will execute your file everytime
it is used. This also adds overhead, but this may be accpetable for small files
or in a debugging environement. (B<NOTE:> Be sure to check C<$@> after a C<do>,
because do works like C<eval>)


=head2 Why doesn't the following line work?

   [+ $var . "<b>". $foo . "</b>". $bar +]

See what we mean? This is an Escaping & Unescaping problem for sure. You
need to escape <b> as ' &lt;b&gt ' and you probably also need to read the
section on L<"Escaping & Unescaping">...


=head2 I'm getting: "Glob not terminated at ..."

This might be a problem with L<"Escaping & Unescaping"> as well.


=head2 My HTML is getting stripped out.

Sounds like a problem with Escaping & Unescaping again!  

Unless, of course, you have already read the section on Escaping &
Unescaping, and it is still happening... Like if you are using optRawInput
and your HTML is _still_ being stripped out... 


=head2 I _am_ using optRawInput, and my HTML _is_ still being stripped out!

Aha! Well that's different! Never mind..

It can be easy to accidentally set optRawInput too late in your code...

Try setting it in an extra Perl block  S<( [- $optRawInput = 1 -] )> 
earlier in the code, or in the server config, and see if that doesn't 
solve the problem... (optRawInput must be set before the block that 
uses it begins, as the block which uses it shouldn't be translated).


=head2 Help! I got a SIGSEGV! Ack!

If Embperl is not compiled at server startup, it can cause error messages,
SEGfaults, core dumps, buffer overflow, etc - especially if you are 
using another module inside an Embperl page. As far as anyone can tell,   
this seems to be a Perl/mod_perl problem - but maybe not. If you have any
ideas, let me know.

To see the steps for loading Embperl at server startup, please see the
section L<"Downloading, Compiling & Installing">.

NOTE: When mod_perl is compiled with B<USE_DSO> it behaves vice versa
and you may get SIGSEGVs when Embper is loaded at server startup time.

=head2 I am having troubles with using Embperl in combination with
Apache::Include inside a Apache::Registry script.

This is a known problem, but it is a problem with mod_perl rather than
with Embperl. It looks like mod_perl clears the request_rec after the
first subrequest, so that it later doesn't know which subrequest was
intended (unless it's explicitly specified). Try using:

    Apache::Include->virtual("test.epl", $r);

(instead of just Apache::Include->virtual("test.epl");
where $r is the apache request rec)



=head2 I can't get PerlSendHeader to work under Embperl?

You don't need PerlSendHeader when using Embperl - Embperl always sends
its own httpd header.


=head2 But how do I customize the header that Embperl is sending?

You'll find the answer to this and many other header issues  in 
the L<"Common Questions"> section.


=head2 I can't figure out how to split a 'while' statement across 
two [- -] segments

That isn't surprising, as you cannot split Perl statements across multiple
[- -] blocks in Embperl :) You need to use a metacommand for that. The [$while$]
metacommand comes to mind... :) 

For a list of all possible metacommands, see the section on 
L<Meta-Commands|Embperl/"[$ Cmd Arg $]  (Meta-Commands)"> in the Embperl documentation.

        [$ while $st -> fetch $]
                #some html or other Embperl blocks goes here
        [$ endwhile $]

Newer Embperl versions (1.2b3 and above) supports the [* *] which can be
used for such purposes.

        [* while ($st -> fetch) { *]
                #some html or other Embperl blocks goes here
        [* } *]

While the later can use all Perl control structures, the first seems to
me more readable and is better debugable, because Embperl controls the
execution of the control structure it can do a quite better job in debug
logging.




=head2 My HTML tags like '<' '>' and '"' are being translated to &lt;, &gt; !!!

Hey! Not you again!? I thought we already sent you to the 
L<"Escaping & Unescaping"> section of the FAQ?!?! ;)


=head2 Netscape asks to reload the document

If you have something like this in your source, it may be the problem:

    <META HTTP-EQUIV="content-type" CONTENT="text/html;charset=iso-8859-1">

Netscape seems to have a problem in such cases, because the http header is
only content-type text/html, while the META HTTP-EQUIV has an additional
charset specified. If you turn optEarlyHttpHeader off, Embperl will
automatically set the http header to be the same as the META HTTP-EQUIV.


=head2 I get "Stack underflow"

The problem often occurs, when you have a <table> tag in one file and a </table>
tag in another file and you both include them in a main page (e.g. as header
and footer). There are two workarounds for this problem:

=over 4

=item 1. Set optDisableTableScan

This will avoid that Embperl takes any action on tables. You can disable/enable 
this (also multiple times) inside the page with

  [- $optDisableTableScan = 1 -]

If you put this at the top of your header/footer which you include with Execute,
then the main page will still process dynamic tables.

=item 2. Add a <table> as comment

Add the following to the top of 
the footer document:

  <!-- <table><tr><td> -->

This will work also, because Embperl (1.x) will not scan for html comments

=back


=head1 Common Questions


The most common questions of all deal with L<"Escaping 
& Unescaping">  - they are so common that the whole next section is 
devoted to them.  Less common questions are addressed here:




=head2 How can I get my HTML files to be converted into Perl code which, as a
whole, could then be compiled as function so that I could, for 
instance, fetch Perl docs from the Formatter table and compile them the
way AUTOLOAD does.

Embperl cannot covert your HTML into one piece of Perl-code, but you can
wrap the call to Execute into a Perl function and let AUTOLOAD call it.


=head2 I have an HTML page which is dynamically generated at runtime 
and should be post-processed by Embperl. How can I do this?

=over 4

=item 1.) Generate the page within a normal CGI/Apache::Registry script and
put the result into a scalar - then you can call HTML::Embperl::Execute to
post-process your document. Execute can either send the document to the
browser or put it into another scalar for further processing.

=item 2.) Use EMBPERL_INPUT_FUNC (1.1b1 and above). With this configuration
directive, you can specify a custom input function which reads the
HTML source from the disk or even from a database. Embperl also
provides the function ProxyInput, which allows you to get input from
another web server altogether.

=item 3.) Look at the module Apache::EmbperlChain, which is able to chain
multiple modules, including Embperl, together.


=back

=head2 How can I customise the header that Embperl is sending?

You can write it as

    <meta http-equiv="Content-Type" content="text/html">

(Embperl will automatically insert all meta http-equiv tags into the http
header)

or use %http_headers_out

    [- $http_headers_out{'Content-Type'} = 'text/html' -]

or (only when running under mod_perl) you can use

    [- $req_rec -> content_type ('text/html') -]


=head2 Can I use Embperl to send cookies?

Yes. Embperl sends its own headers, so all you have to do to send cookies
is to remember to print an additional header.

Example Code:

=over 4

=item 1.) in documents, add

    <META HTTP-EQUIV="Set-Cookie" CONTENT="[+ $cookie +] = [+ $value +]">

=item 2.) or use %http_headers_out

    [- $http_headers_out{'Set-Cookie'} = "$cookie=$value" -]

=item 3.) or - using mod_perl's functionality - use

    [- $req_rec ->  header_out("Set-Cookie" => "$cookie=$value"); -]

=back

NOTE: You make also take a look at Embperls (1.2b2 and above) ability to
handle sessions for you inside the %udat and %mdat hashes.

=head2 Can I do a Redirect with Embperl?

The following way works with mod_perl and as cgi:

  [- $http_headers_out{'Location'} = "http://www.ecos.de/embperl/" -]

the status of the request will automaticly set to 301.

or use the mod_perl function Apache::header_out.

Example Code:

    [-
    use Apache;
    use Apache::Constants qw(REDIRECT);

    $req_rec->header_out("Location" => "http://$ENV{HTTP_HOST}/specials/");
    $req_rec->status(REDIRECT);
    -]


If there is nothing more to do on this page, you may call C<exit> directly
after setting the status.


=head2 Can I serve random GIFs with Embperl?
(Will Lincoln Stein's GD.pm module work with Embperl??)

As always, there is more than one way to do this - especially as this 
is more of a question of how you are coding your HTML than how you 
are coding your Embperl.

Here are some ideas:

=over 4

=item 1.) You could include an IMG tag which points to your cgi-bin, where
a regular CGI script serves the graphics.

=item 2.)  You could be running Apache::Registry, which can generate
on-the-fly GIFs using GD. (This is just the same as if you were including
the GD image from a static page or from another CGI script, but it allows
all of the appropriate logic to live in a single document, which might be
appropriate for some Embperl users).

=back

If you think of another way, or come up with some sample code, I'd 
love to hear from you, so that I could add it to the FAQ...


=head2 Can I use Embperl as a template for forms?
Can I make form values persist (like with "vanilla" CGI)?
Does Embperl rewrite my template file so that parameters of things like
INPUT/TEXTAREA/SELECT persist?

Yes. Your page design staff should just be able to say <input name="foo">
and let the default attributes of "foo" be defined elsewhere - for
instance in a settings file. In this case, %fdat should be pre-set with
your default values. Setting $fdat{foo} = "abc" will cause Embperl to
change the above code to <input name="foo" value="abc">.




=head2 Does Embperl automatically add HIDDEN fields?

The [$hidden$] metacommand creates hidden fields for every entry in %fdat
which was not used by any other input tag so far.

You can also try something like this:

    [-
    $fdat{foo} = "abc" ;
    $fdat{bar} = "xyz" ;
    -]


    <input name="foo">

    [$hidden$]

and Embperl will create:

    <input name="foo" value="abc">
    <input type=hidden name="bar" value="xyz">

For a list of all possible metacommands, see the section on 
L<Meta-Commands|Embperl/"[$ Cmd Arg $]  (Meta-Commands)"> in the Embperl documentation.


=head2 What about security? Is Embperl Secure?

Just like anything else, Embperl is as secure as you make it.  Embperl
incorporates Safe.pm, which will make it impossible to accidentally access
other Packages - it also permits the Administrator to disable Perl
opcodes, etc.

For more on security, please see L<Embperl/"(Safe-)Namespaces and opcode restrictions"> in the Embperl 
documentation.


=head2 Is there any plan to make Embperl an Object so someone could subclass it
and override certain of its methods?  (For example, I'd like to let it
parse the file for me, but then let me control the manipulation of the
form tags.)

Embperl is going to be an Object from version 1.2b1. This, 
among other things, make it re-entrant, so that you will be able to 
call Execute from within an Embperl page. It will also mean that 
Embperl will come with hooks, which will allow you to alter or change
the way Embperl processes code. The details have not all been worked 
out yet, but I'm working on it... :)


=head2 Are Embperl routines currently pre-compiled or even cached, or are only
fragments cached?

All embedded Perl code is compiled the first time it is executed and
cached for later use. The second time the code is executed, only the
precompiled p-code is called.

Every code block is compiled as a single subroutine. The HTML text between
the Perl block is still read from the file.


=head2 Why are Perl blocks broken up into single subroutines?

=over 4

=item 1.) It makes it easier to process the HTML tags between the Perl blocks -
this gives you more control over what's happening

=item 2.) If you compiled _everything_ to Perl, you would hold all of the
HTML text in memory, and your Apache child processes would grow and
grow... But often-accessed documents are still held in memory by 
your os disk cache, which is much more memory-efficient.

=item 3.) There is only so far that you can go with precompiling until you reach
the point of diminishing returns. My guess is that converting dynamic
tables and other HTML processing to Perl at this point in Embperl's
development would actually slow down operation.

=back

=head2 Can I pass QUERY_STRING information to an HTML::Embperl::Execute call?

With Embperl 1.0 and higher, you can do this. QUERY_STRING is set as
$ENV{QUERY_STRING} by default. Alternatively, you can use the fdat 
parameter to pass values to %fdat.



=head2 How to include other files into Embperl pages?

I am using embedded Perl on my site and am curious if I can use it for
server side includes.  I want to embed the contents of file x.html into
file y.html such that whenever I change x.html, displaying y.html will
also reflect this change. How do I do it using embedded perl?


You need Embperl 1.2b4 or above. Then you can say inside of y.html:

 [- Execute ('x.html') -]

=head2 EmbPerl iteration without indexing

I have a rather large table in a database which I'd like to display using
EmbPerl.  All of the examples show a process of fetching all the data
first,
then iterating through it using $row and $col, like this:

   [-
   $sth = $dbh -> prepare ("select * from $comptbl order by SubSystem");
   $sth -> execute;
   $dref = $sth -> fetchall_arrayref;
   -]
   <TABLE>
      ... $dref -> [$row][0] ...
   </TABLE>

I'd prefer to fetch the data one row at a time, how can I do this?

For solution 1 you may write

 <table>
 [$while $rref = $sth -> fetch $]
     <tr>....</tr>
 [$endwhile$]
 </table>

Solution 2 should work like this

 <table>
    <tr> [- $dummy = $row ; $rref = $sth -> fetch -]
            ....
    </tr>
 </table>

The table ends when the expression where $row is used in some way returns
<undef>. So also there is no releation between $row and the fetch, both
conditions are met.

=head2 How to display arrays with undef values in it?

 
I'm doing a search on a table where some of the columns have NULL and
non-NULL values.  DBIx::Recordset has no problem reading this values 
The problem is that I then tried to print these values
out in a table using Embperl's  table feature, like this.
 
 <TABLE>
 <TR>
 <TD>$set[$row]{column_name1}</TD>
 <TD>$set[$row]{column_nameN}</TD>
 </TR>
 
 The problem is that I got 5 rows instead of the 15 that I was expected.  I
 have been  trying all kinds of tweaks to the arguments to the Search
 function and getting nowwhere, until I re-read the Embperl docs.  Embperl
 will not print out a table row if one of the columns has an 
 expression that
 is undefined.  This is a problem since DBIx::Recordset (and DBI)
 natually uses undef to represent a NULL value for a column.  So I made a
 slight modification to my embperl code.
 
 <TABLE>
 <TR>
 <TD>defined($set[$row]{column_name1}) ? $set[$row]{column_name1} :
 "UNDEF"</TD>
                                 .   .   .
 <TD>$set[$row]{column_nameN} ? $set[$row]{column_nameN} : "UNDEF"</TD>
 </TR>
 
Now all 15 rows appear as expected, with "UNDEF" representing the NULL
values in the database.

Another way top solve you problem may be:


 <TABLE>
 <TR>
 [- $r = $set[$row] -]
 <TD> [+ $r -> {column_name1} +] </TD>
                                 .   .   .
 <TD> [+ $r -> {column_nameN} +] </TD>
 </TR>


This will only refer one time to $row and the expression is defined,
as long as the row could be fetched from the db. All NULL fields will
be displayed as empty table cells.





=head1 Escaping & Unescaping

=head2 Escaping & Unescaping Input

By default, Embperl removes all HTML tags from the Perl source. It does
this because many high-end WYSIWYG HTML Editors (like MS Front Page)
insert HTML tags like <FONT> and <COLOR> in rather random places (like in
the middle of your Perl code). This Embperl feature keeps things like

    [- $var  = 1; <br>
        $foo = 2 -]

permissable, so that you can enter Perl code while you mark up pages in an
editor, all at once.  In this example, Embperl would remove the
unnecessary <br> tag and, therefore, make Perl happy. And if Perl is
happy, we are all happy. 

It is not difficult to change this behavior, if you are the kind 
of person who codes HTML in an ascii editor (like vi or emacs).

If you use a high-level HTML editor, you shouldn't have any problems
with input escaping, because the editor will, for example, write a '<' as
'&lt;' in the HTML code. Embperl translates this back to '<' and therefore 
it knows that this wasn't an HTML tag which should be removed.

Problems with input escaping only occur if you use an ascii
editor. Then you will need to escape input (see the next section 
for details on how to do this). 


To see the exact steps taken by Embperl to process a Perl-laden document,
please see the section L<Inside Embperl|Embperl/"Inside Embperl - How the embedded Perl code is actually processed"> in the Embperl documentation.


=head2 Ways To Escape Input:

=over 4

=item 1. Escape it ->  \<H1>


NOTE: Inside double quotes you will need to use \\ (double backslash),
since Perl will remove the first Escape itself.

Example: In most cases '\<tr>' but inside double-quotes "\\<tr>"

=item 2. Turn off Escaping for all input by setting the optRawInput in
EMBPERL_OPTIONS

=item 3. Learn to avoid using HTML tags inside Perl code. Once you get the hang
of it, you'll love it. 

=back

Here is one example of how to do it:

    [- $output = "<bold>Hello world</bold>" -]
    [+ $output +]

write

    [- $output = "Hello world<bold>" -]


this outputs 

    Hello world

or

    <bold>[+ $output +]</bold>


this outputs

    <bold>Hello world</bold>




And here is another example of how to do it:

    [-
    @a = ('a', 'b', 'c') ;
    foreach $i (0..2)
        {
        $output. = "<tr><td>Row $a[$i]</td></tr>" ;
        }
    -]
    <table>
    [+ $output +]
    </table>



The output here would be:

    <table>Row aRow bRow c</table>


The Embperl version is

    [-
    @a = ('a', 'b', 'c') ;
    -]
    <table>
    <tr><td>Row [+ $a[$row] +]</td></tr>" ;
    </table>

The output will be

    <table>
    <tr><td>Row a</td></tr>" ;
    <tr><td>Row b</td></tr>" ;
    <tr><td>Row c</td></tr>" ;
    </table>



And another: This elegant solution shows you how to take advantage of
Embperl's ability to create dynamic tables:

    [-
    use DBI;

    my $dbh =
    DBI->connect("DBI:mysql:database:localhost","Username","Password") ||
    die($!);

    $hstmt = $dbh->prepare("select ID, Heading from Shops order by Heading");
    $hstmt->execute();
    $dat = $hstmt->fetchall_arrayref() ;
    $hstmt->finish();
    $dbh->disconnect();
    -]
    <table border=1>
    <tr><td>[+ $$dat[$row][$col] +]</td></tr>
    </table>


This HTML code will then display the contents of the whole array.




=head2 Escaping & Unescaping Output


Embperl will also escape the output - so <H1> will be translated to
&lt;H1&gt;

To see the exact steps taken by Embperl to process a Perl-laden document,
please see L<Inside Embperl|Embperl/"Inside Embperl - How the embedded Perl code is actually processed"> in the Embperl documentation.


=head2 Ways To Escape Output:

=over 4

=item 1.) Escape it -> \\<H1>

    (You need a double backslash \\, because
    the first one is removed by Perl and the second by Embperl.

=item 2.) set $escmode = 0 -> [- $escmode = 0 ; -]


=item 3.) set SetEnv EMBPERL_ESCMODE 0 in your srm.conf

=back







=head1 Debugging


=head2 I am having a hard time debugging Embperl code


Have you, umm, checked the error log? ;)

Have you tried setting debug flags higher by resetting EMBPERL_DEBUG in
the server config files? (And still higher? :)

dbgMem isn't usually very useful as it always outputs a lot of allocation.
dbgFlushLog and dbgFlushOutput should be used if (and only if) you are 
debugging SIGSEGVs.

For easy debugging, you can tell Embperl to display a link at the top of
each page to your log file. Then every error displayed in an error page is
a link to the corresponding position in the logfile, so you can easily
find the place where something is going wrong

For more on using HTML links to the Embperl error log, see 
L<Embperl/"EMBPERL_DEBUG"> in the Embperldocs.




=head2 Embperl is running slow.

There are some debugging settings which may cause Embperl to drastically
slow down. If you are done with debugging, set debugging bits back 
to normal.

Also, using dbgFlushLog and dbgFlushOutput will make execution much
slower. These are only intended for debugging SIGSEGVs. 

Never set all debugging bits!


=head2 How can I improve Embperl's performance?

=over 4

=item 1.) Load Embperl at server startup. This will cause
    UNIX systems to only allocate memory once, and not
    for each child process. This reduces memory use,
    especially the need to swap additional memory.

=item 2.) Disable all unneeded debugging flags. You should never set 
    dbgFlushLog dbgFlushOutput, dbgMem and dbgEvalNoCache in a
    production environment.

=item 3.) You may also want to take a look at the available options
    you can set via EMBPERL_OPTIONS. For example optDisableChdir, will
    speed up processing because it avoid the change directory before
    every request.

=back







=head1 Customizing

=head2 How can I fiddle with the default values?
How can I override or alter this or that behavior?

Usually, defaults are set in a way that is likely to make most sense for a
majority of users. As of version 1.0, Embperl allows much more flexibility
in tweaking your own default values than before. Take a look at EMBERPL_OPTIONS.



=head2 I'd like to (temporarily) disable some of Embperl's features. 
What can be customized?

=over 4

=item 1.) Use optDisableHtmlScan to disable processing of html tags.
If this is set, Embperl will only pay attention to these types of 
constructs:

S<[+/-/!/$ .... $/!/-/+]>


=item 2.) optDisableTableScan, optDisableInputScan and optDisableMetaScan can be
used to disable individual parts of HTML processing.

You may set these flags in your server config, or at runtime:

    [+ $optDisableHtmlScan = 1 +]
    <table> foo </table>
    [+ $optDisableHtmlScan = 0 +]

=back

=head2 How can I disable auto-tables?

Set optDisableTableScan in EMBPERL_OPTIONS



=head2 How can I change predefined values like $escmode from my Toolbox module?

    $HTML::Embperl::escmode = 0 ;

Predefined values in Embperl are simply aliases for $HTML::Embperl::foo
(for instance, $Z<>escmode is an alias for $HTML::Embperl::escmode)


=head2 How can I customize the header that Embperl is sending?

You'll find the answer to this and many other header issues  in
the L<"Common Questions"> section.


=head2 How can I use a different character set?
ASCII values over 128 are showing up as ? (question marks)!

This is caused by the translation of characters to HTML escapes.  Embperl
translates them to escapes which are then sometimes not understood by the
browser, which may display a "?" instead, because it is using the wrong
character set.

If you want to use the escaping features of Embperl in this case, you have
to adapt the file C<epchar.c> to your character set.

The distribution contain already an C<epchar.c.iso-latin-2> from Jiri Novak which
is an replacement for epchar.c for the iso-8859-2 (iso-latin-2) character set.
If you want to use iso-latin-2, simply renmae C<epchar.c.iso-latin-2> to C<epchar.c>.
There is also an file C<epchar.c.min> from Sangmook Yi, which leaves all
chars above 128 untouch, which is especialy usefull for two byte charsets.

This file contains three tables:

Char2Html []   Convert characters to html escape

Char2Url  []   Convert characters to url escapes (do not change this one!!)

Html2Char []   Convert html escapes to characters

You need to change the first and the last tables. Do not change the second
table!!

Please make sure Char2Html contains one entry (and only one entry) for 
each of the 256 ascii codes (with none left undefined) in
the right order, and that Html2Char is sorted by html escape.

If somebody generates new tables for national character sets, please send
a copy to the author, so it can be included it in future versions of
Embperl.





=head1 Optimizing & Fine-Tuning

=head2 How can I be sure that Embperl is re-compiling my page template
(and the Perl blocks contained in it) only when needed, and not each time?

As long as your input file's time stamp stays the same, Embperl will
only compile the script the first time it's called. When you use 
the Execute function, Embperl will recompile the script only if 
the input file and mtime paramenters have changed since the last 
time the script was called.

You can verfiy this by setting dbgDefEval. Now, every time a Perl block is
compiled, Embperl logs a line starting with DEF:. You will see this line
only on the first request.  The cached Perl blocks are stored as a set of
subroutines in the namespace of the document. (HTML::Embperl::DOC::_<n> is
the default) Look at the logfile to see the actual name. 


=head2 How can I pre-compile pages, so that each httpd child doesn't 
have to have its own separate copies of the pre-compiled pages?

To pre-compile pages, just call Execute once for every file at server
startup in your startup.pl file.


=head2 In what namespace does Embperl store pre-compiled data?

The cached Perl blocks are stored as a set of subroutines in the namespace
of the document. (HTML::Embperl::DOC::_<n> for default) Look at the logfile
to see the actual name.


=head2 I have both Embperl and ordinary Perl processes running. The docs 
say that Embperl uses a CGI.pm instance in its own internal processing,
but they don't say how to control it. How can I get Embperl to use *my* 
CGI.pm object instead of creating its own? 

Embperl only creates a CGI objects to process multipart form data (from
fileupload). In all other cases Embperl doesn't use CGI.pm. There is no
way to change this behaviour, or access the internal CGI object in case
of file-uploads.





=head1 Additional Help

=head2 Where can I get more help?

You can get free support on the mod_perl mailing list. If you need
commercial support (with a guarantee for response time or a solution) for
Embperl, or if you want a web site where you can run your Embperl/mod_perl 
scripts without setting up your own web server, please send email to 
info@ecos.de.

Please also see the section L<Embperl/"Support"> in the Embperl documentation.



=head1 SEE ALSO

some links here

=head1 AUTHOR

Gerald Richter <richter@ecos.de>

Edited by Nora Mikes <nora@radio.cz>






