#! /bin/bash
# FS QA Test No. btrfs/003
#
# btrfs vol tests
#
#-----------------------------------------------------------------------
# Copyright (c) 2011 Oracle.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#-----------------------------------------------------------------------
#

seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"

here=`pwd`
tmp=/tmp/$$
status=1	# failure is the default!
dev_removed=0
removed_dev_htl=""
trap "_cleanup; exit \$status" 0 1 2 3 15

_cleanup()
{
    cd /
    rm -f $tmp.*
    if [ $dev_removed == 1 ]; then
	_scratch_unmount
	_devmgt_add "${removed_dev_htl}"
    fi
}

# get standard environment, filters and checks
. ./common/rc
. ./common/filter

_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_scratch_dev_pool 4
_require_deletable_scratch_dev_pool
_require_command "$WIPEFS_PROG" wipefs

rm -f $seqres.full

# Test cases related to raid in btrfs
_test_raid0()
{
	export MKFS_OPTIONS="-m raid0 -d raid0"
	_scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 -c
	_scratch_unmount
}

_test_raid1()
{
	export MKFS_OPTIONS="-m raid1 -d raid1"
	_scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 -c
	_scratch_unmount
}

_test_raid10()
{
	export MKFS_OPTIONS="-m raid10 -d raid10"
	_scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10
	_scratch_unmount
}

_test_single()
{
	export MKFS_OPTIONS="-m single -d single"
	_scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10
	_scratch_unmount
}

_test_add()
{
	local i
	local -a devs="( $SCRATCH_DEV_POOL )"
	local n=${#devs[@]}

	n=$(($n-1))

	export MKFS_OPTIONS=""
	_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10
	for i in `seq 2 $n`; do
		$WIPEFS_PROG -a ${devs[$i]} >> $seqres.full 2>&1 || \
			_fail "wipefs failed"
		$BTRFS_UTIL_PROG device add ${devs[$i]} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "device add failed"
	done
	$BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "balance failed"
	_scratch_unmount
}

_test_replace()
{
	local i
	local devs=( $SCRATCH_DEV_POOL )
	local n=${#devs[@]}
	local ds
	local d

	# exclude the first and the last disk in the disk pool
	n=$(($n-1))
	ds=${devs[@]:1:$(($n-1))}

	export MKFS_OPTIONS="-m raid1 -d raid1"
	_scratch_mkfs "$ds" >> $seqres.full 2>&1 || _fail "tr: mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10

	#pick the 2nd last disk 
	ds=${devs[@]:$(($n-1)):1}

	# retrive the HTL for this scsi disk
	d=`echo $ds|cut -d"/" -f3`
	removed_dev_htl=`ls -l /sys/class/block/${d} | rev | cut -d "/" -f 3 | rev`

	#fail disk
	_devmgt_remove ${removed_dev_htl} $ds
	dev_removed=1

	$BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV | grep "Some devices missing" >> $seqres.full || _fail \
							"btrfs did not report device missing"

	# add a new disk to btrfs
	ds=${devs[@]:$(($n)):1}
	$WIPEFS_PROG -a ${ds} >> $seqres.full 2>&1 || _fail "wipefs failed"
	$BTRFS_UTIL_PROG device add ${ds} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev add failed"
	# in some system balance fails if there is no delay (a bug)
	# putting sleep 10 to work around as of now
	# sleep 10
	$BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev balance failed"

	# cleaup. add the removed disk
	_scratch_unmount
	_devmgt_add "${removed_dev_htl}"
	dev_removed=0
}

_test_remove()
{
	_scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
	_scratch_mount
	dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX`
	_populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10

	# pick last dev in the list
	dev_del=`echo ${SCRATCH_DEV_POOL} | awk '{print $NF}'`
	$BTRFS_UTIL_PROG device delete $dev_del $SCRATCH_MNT || _fail "btrfs device delete failed"
	$BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV 2>&1 | grep $dev_del >> $seqres.full && _fail "btrfs still shows the deleted dev"
	_scratch_unmount
}

_test_raid0
_test_raid1
_test_raid10
_test_single
_test_add
_test_replace
_test_remove

echo "Silence is golden"
status=0; exit
