patch-2.1.77 linux/drivers/block/paride/bpck.c
Next file: linux/drivers/block/paride/comm.c
Previous file: linux/drivers/block/paride/aten.c
Back to the patch index
Back to the overall index
- Lines: 477
- Date:
Sun Dec 28 12:05:45 1997
- Orig file:
v2.1.76/linux/drivers/block/paride/bpck.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.76/linux/drivers/block/paride/bpck.c linux/drivers/block/paride/bpck.c
@@ -0,0 +1,476 @@
+/*
+ bpck.c (c) 1996,1997 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU public license.
+
+ bpck.c is a low-level protocol driver for the MicroSolutions
+ "backpack" parallel port IDE adapter.
+
+*/
+
+#define BPCK_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#undef r2
+#undef w2
+
+#define PC pi->private
+#define r2() (PC=(in_p(2) & 0xff))
+#define w2(byte) {out_p(2,byte); PC = byte;}
+#define t2(pat) {PC ^= pat; out_p(2,PC);}
+#define e2() {PC &= 0xfe; out_p(2,PC);}
+#define o2() {PC |= 1; out_p(2,PC);}
+
+#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+ cont = 2 - use internal bpck register addressing
+*/
+
+static int cont_map[3] = { 0x40, 0x48, 0 };
+
+static int bpck_read_regr( PIA *pi, int cont, int regr )
+
+{ int r, l, h;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+ l = r1();
+ t2(4);
+ h = r1();
+ return j44(l,h);
+
+ case 1: w0(r & 0xf); w0(r); t2(2);
+ e2(); t2(0x20);
+ t2(4); h = r0();
+ t2(1); t2(0x20);
+ return h;
+
+ case 2:
+ case 3:
+ case 4: w0(r); w2(9); w2(0); w2(0x20);
+ h = r4();
+ w2(0);
+ return h;
+
+ }
+ return -1;
+}
+
+static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(r);
+ t2(2);
+ w0(val);
+ o2(); t2(4); t2(1);
+ break;
+
+ case 2:
+ case 3:
+ case 4: w0(r); w2(9); w2(0);
+ w0(val); w2(1); w2(3); w2(0);
+ break;
+
+ }
+}
+
+/* These macros access the bpck registers in native addressing */
+
+#define WR(r,v) bpck_write_regr(pi,2,r,v)
+#define RR(r) (bpck_read_regr(pi,2,r))
+
+static void bpck_write_block( PIA *pi, char * buf, int count )
+
+{ int i;
+
+ switch (pi->mode) {
+
+ case 0: WR(4,0x40);
+ w0(0x40); t2(2); t2(1);
+ for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+ WR(4,0);
+ break;
+
+ case 1: WR(4,0x50);
+ w0(0x40); t2(2); t2(1);
+ for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+ WR(4,0x10);
+ break;
+
+ case 2: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count;i++) w4(buf[i]);
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 3: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 4: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
+ w2(0);
+ WR(4,8);
+ break;
+ }
+}
+
+static void bpck_read_block( PIA *pi, char * buf, int count )
+
+{ int i, l, h;
+
+ switch (pi->mode) {
+
+ case 0: WR(4,0x40);
+ w0(0x40); t2(2);
+ for (i=0;i<count;i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l,h);
+ }
+ WR(4,0);
+ break;
+
+ case 1: WR(4,0x50);
+ w0(0x40); t2(2); t2(0x20);
+ for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
+ t2(1); t2(0x20);
+ WR(4,0x10);
+ break;
+
+ case 2: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count;i++) buf[i] = r4();
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 3: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 4: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
+ w2(0);
+ WR(4,8);
+ break;
+
+ }
+}
+
+static int bpck_probe_unit ( PIA *pi )
+
+{ int o1, o0, f7, id;
+ int t, s;
+
+ id = pi->unit;
+ s = 0;
+ w2(4); w2(0xe); r2(); t2(2);
+ o1 = r1()&0xf8;
+ o0 = r0();
+ w0(255-id); w2(4); w0(id);
+ t2(8); t2(8); t2(8);
+ t2(2); t = r1()&0xf8;
+ f7 = ((id % 8) == 7);
+ if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+ if ((t == o1) && ((!f7) || (s == o1))) {
+ w2(0x4c); w0(o0);
+ return 0;
+ }
+ t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
+ return 1;
+}
+
+static void bpck_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ w0(0xff-pi->unit); w2(4); w0(pi->unit);
+ t2(8); t2(8); t2(8);
+ t2(2); t2(2);
+
+ switch (pi->mode) {
+
+ case 0: t2(8); WR(4,0);
+ break;
+
+ case 1: t2(8); WR(4,0x10);
+ break;
+
+ case 2:
+ case 3:
+ case 4: w2(0); WR(4,8);
+ break;
+
+ }
+
+ WR(5,8);
+
+ if (pi->devtype == PI_PCD) {
+ WR(0x46,0x10); /* fiddle with ESS logic ??? */
+ WR(0x4c,0x38);
+ WR(0x4d,0x88);
+ WR(0x46,0xa0);
+ WR(0x41,0);
+ WR(0x4e,8);
+ }
+}
+
+static void bpck_disconnect ( PIA *pi )
+
+{ w0(0);
+ if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+ w2(0x4c); w0(pi->saved_r0);
+}
+
+static void bpck_force_spp ( PIA *pi )
+
+/* This fakes the EPP protocol to turn off EPP ... */
+
+{ pi->saved_r0 = r0();
+ w0(0xff-pi->unit); w2(4); w0(pi->unit);
+ t2(8); t2(8); t2(8);
+ t2(2); t2(2);
+
+ w2(0);
+ w0(4); w2(9); w2(0);
+ w0(0); w2(1); w2(3); w2(0);
+ w0(0); w2(9); w2(0);
+ w2(0x4c); w0(pi->saved_r0);
+}
+
+#define TEST_LEN 16
+
+static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int i, e, l, h, om;
+ char buf[TEST_LEN];
+
+ bpck_force_spp(pi);
+
+ switch (pi->mode) {
+
+ case 0: bpck_connect(pi);
+ WR(0x13,0x7f);
+ w0(0x13); t2(2);
+ for(i=0;i<TEST_LEN;i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l,h);
+ }
+ bpck_disconnect(pi);
+ break;
+
+ case 1: bpck_connect(pi);
+ WR(0x13,0x7f);
+ w0(0x13); t2(2); t2(0x20);
+ for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
+ t2(1); t2(0x20);
+ bpck_disconnect(pi);
+ break;
+
+ case 2:
+ case 3:
+ case 4: om = pi->mode;
+ pi->mode = 0;
+ bpck_connect(pi);
+ WR(7,3);
+ WR(4,8);
+ bpck_disconnect(pi);
+
+ pi->mode = om;
+ bpck_connect(pi);
+ w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
+
+ switch (pi->mode) {
+ case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
+ break;
+ case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
+ break;
+ case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
+ break;
+ }
+
+ w2(0);
+ WR(7,0);
+ bpck_disconnect(pi);
+
+ break;
+
+ }
+
+ if (verbose) {
+ printk("%s: bpck: 0x%x unit %d mode %d: ",
+ pi->device,pi->port,pi->unit,pi->mode);
+ for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
+ printk("\n");
+ }
+
+ e = 0;
+ for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+ return e;
+}
+
+static void bpck_read_eeprom ( PIA *pi, char * buf )
+
+{ int i,j,k,n,p,v,f, om;
+
+ bpck_force_spp(pi);
+
+ om = pi->mode;
+ pi->mode = 0;
+
+ bpck_connect(pi);
+
+ n = 0;
+ WR(4,0);
+ for (i=0;i<64;i++) {
+ WR(6,8);
+ WR(6,0xc);
+ p = 0x100;
+ for (k=0;k<9;k++) {
+ f = (((i + 0x180) & p) != 0) * 2;
+ WR(6,f+0xc);
+ WR(6,f+0xd);
+ WR(6,f+0xc);
+ p = (p >> 1);
+ }
+ for (j=0;j<2;j++) {
+ v = 0;
+ for (k=0;k<8;k++) {
+ WR(6,0xc);
+ WR(6,0xd);
+ WR(6,0xc);
+ f = RR(0);
+ v = 2*v + (f == 0x84);
+ }
+ buf[2*i+1-j] = v;
+ }
+ }
+ WR(6,8);
+ WR(6,0);
+ WR(5,8);
+
+ bpck_disconnect(pi);
+
+ if (om >= 2) {
+ bpck_connect(pi);
+ WR(7,3);
+ WR(4,8);
+ bpck_disconnect(pi);
+ }
+
+ pi->mode = om;
+}
+
+static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */
+
+{ int i, r, m;
+
+ w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
+ m = -1;
+ if (r == i) m = 2;
+ if (r == (255-i)) m = 0;
+
+ w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
+ if (r != (255-i)) m = -1;
+
+ if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
+ if (m == 2) { w2(0x26); w2(0xc); }
+
+ if (m == -1) return 0;
+ return 5;
+}
+
+static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
+ "EPP-16","EPP-32" };
+
+#ifdef DUMP_EEPROM
+ int i;
+#endif
+
+ bpck_read_eeprom(pi,scratch);
+
+#ifdef DUMP_EEPROM
+ if (verbose) {
+ for(i=0;i<128;i++)
+ if ((scratch[i] < ' ') || (scratch[i] > '~'))
+ scratch[i] = '.';
+ printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
+ printk("%s: %64.64s\n",pi->device,&scratch[64]);
+ }
+#endif
+
+ printk("%s: bpck %s, backpack %8.8s unit %d",
+ pi->device,BPCK_VERSION,&scratch[110],pi->unit);
+ printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
+ pi->mode,mode_string[pi->mode],pi->delay);
+}
+
+static void bpck_inc_use( void )
+
+{ MOD_INC_USE_COUNT;
+}
+
+static void bpck_dec_use( void )
+
+{ MOD_DEC_USE_COUNT;
+}
+
+struct pi_protocol bpck = { "bpck",0,5,2,4,256,
+ bpck_write_regr,
+ bpck_read_regr,
+ bpck_write_block,
+ bpck_read_block,
+ bpck_connect,
+ bpck_disconnect,
+ bpck_test_port,
+ bpck_probe_unit,
+ bpck_test_proto,
+ bpck_log_adapter,
+ bpck_inc_use,
+ bpck_dec_use
+ };
+
+#ifdef MODULE
+
+int init_module(void)
+
+{ return pi_register(&bpck) - 1;
+}
+
+void cleanup_module(void)
+
+{ pi_unregister(&bpck);
+}
+
+#endif
+
+/* end of bpck.c */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov