patch-2.1.44 linux/arch/mips/mm/r6000.c

• Lines: 182
• Date: Thu Jun 26 12:33:38 1997
• Orig file: v2.1.43/linux/arch/mips/mm/r6000.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.1.43/linux/arch/mips/mm/r6000.c linux/arch/mips/mm/r6000.c
@@ -0,0 +1,181 @@
+/* $Id: r6000.c,v 1.1 1997/06/06 09:35:31 ralf Exp $
+ * r6000.c: MMU and cache routines for the R6000 processors.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/cacheops.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/sgialib.h>
+
+__asm__(".set mips3"); /* because we know... */
+
+/* Cache operations. XXX Write these dave... */
+static inline void r6000_flush_cache_all(void)
+{
+	/* XXX */
+}
+
+static void r6000_flush_cache_mm(struct mm_struct *mm)
+{
+	/* XXX */
+}
+
+static void r6000_flush_cache_range(struct mm_struct *mm,
+				    unsigned long start,
+				    unsigned long end)
+{
+	/* XXX */
+}
+
+static void r6000_flush_cache_page(struct vm_area_struct *vma,
+				   unsigned long page)
+{
+	/* XXX */
+}
+
+static void r6000_flush_page_to_ram(unsigned long page)
+{
+	/* XXX */
+}
+
+static void r6000_flush_cache_sigtramp(unsigned long page)
+{
+	/* XXX */
+}
+
+/* TLB operations. XXX Write these dave... */
+static inline void r6000_flush_tlb_all(void)
+{
+	/* XXX */
+}
+
+static void r6000_flush_tlb_mm(struct mm_struct *mm)
+{
+	/* XXX */
+}
+
+static void r6000_flush_tlb_range(struct mm_struct *mm, unsigned long start,
+				  unsigned long end)
+{
+	/* XXX */
+}
+
+static void r6000_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	/* XXX */
+}
+
+static void r6000_load_pgd(unsigned long pg_dir)
+{
+}
+
+static void r6000_pgd_init(unsigned long page)
+{
+	unsigned long dummy1, dummy2;
+
+	/*
+	 * This version is optimized for the R6000.  We generate dirty lines
+	 * in the datacache, overwrite these lines with zeros and then flush
+	 * the cache.  Sounds horribly complicated but is just a trick to
+	 * avoid unnecessary loads of from memory and uncached stores which
+	 * are very expensive.  Not tested yet as the R6000 is a rare CPU only
+	 * available in SGI machines and I don't have one.
+	 */
+	__asm__ __volatile__(
+		".set\tnoreorder\n"
+		"1:\t"
+		"cache\t%5,(%0)\n\t"
+		"sw\t%2,(%0)\n\t"
+		"sw\t%2,4(%0)\n\t"
+		"sw\t%2,8(%0)\n\t"
+		"sw\t%2,12(%0)\n\t"
+		"cache\t%5,16(%0)\n\t"
+		"sw\t%2,16(%0)\n\t"
+		"sw\t%2,20(%0)\n\t"
+		"sw\t%2,24(%0)\n\t"
+		"sw\t%2,28(%0)\n\t"
+		"subu\t%1,1\n\t"
+		"bnez\t%1,1b\n\t"
+		"addiu\t%0,32\n\t"
+		".set\treorder"
+		:"=r" (dummy1),
+		 "=r" (dummy2)
+		:"r" ((unsigned long) invalid_pte_table),
+		 "0" (page),
+		 "1" (PAGE_SIZE/(sizeof(pmd_t)*8)),
+		 "i" (Create_Dirty_Excl_D));
+}
+
+static void r6000_update_mmu_cache(struct vm_area_struct * vma,
+				   unsigned long address, pte_t pte)
+{
+	r6000_flush_tlb_page(vma, address);
+	/*
+	 * FIXME: We should also reload a new entry into the TLB to
+	 * avoid unnecessary exceptions.
+	 */
+}
+
+static void r6000_show_regs(struct pt_regs * regs)
+{
+	/*
+	 * Saved main processor registers
+	 */
+	printk("$0 : %08x %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+	       0, (unsigned long) regs->regs[1], (unsigned long) regs->regs[2],
+	       (unsigned long) regs->regs[3], (unsigned long) regs->regs[4],
+	       (unsigned long) regs->regs[5], (unsigned long) regs->regs[6],
+	       (unsigned long) regs->regs[7]);
+	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+	       (unsigned long) regs->regs[8], (unsigned long) regs->regs[9],
+	       (unsigned long) regs->regs[10], (unsigned long) regs->regs[11],
+               (unsigned long) regs->regs[12], (unsigned long) regs->regs[13],
+	       (unsigned long) regs->regs[14], (unsigned long) regs->regs[15]);
+	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+	       (unsigned long) regs->regs[16], (unsigned long) regs->regs[17],
+	       (unsigned long) regs->regs[18], (unsigned long) regs->regs[19],
+               (unsigned long) regs->regs[20], (unsigned long) regs->regs[21],
+	       (unsigned long) regs->regs[22], (unsigned long) regs->regs[23]);
+	printk("$24: %08lx %08lx                   %08lx %08lx %08lx %08lx\n",
+	       (unsigned long) regs->regs[24], (unsigned long) regs->regs[25],
+	       (unsigned long) regs->regs[28], (unsigned long) regs->regs[29],
+               (unsigned long) regs->regs[30], (unsigned long) regs->regs[31]);
+
+	/*
+	 * Saved cp0 registers
+	 */
+	printk("epc  : %08lx\nStatus: %08x\nCause : %08x\n",
+	       (unsigned long) regs->cp0_epc, (unsigned int) regs->cp0_status,
+	       (unsigned int) regs->cp0_cause);
+}
+
+void ld_mmu_r6000(void)
+{
+	flush_cache_all = r6000_flush_cache_all;
+	flush_cache_mm = r6000_flush_cache_mm;
+	flush_cache_range = r6000_flush_cache_range;
+	flush_cache_page = r6000_flush_cache_page;
+	flush_cache_sigtramp = r6000_flush_cache_sigtramp;
+	flush_page_to_ram = r6000_flush_page_to_ram;
+
+	flush_tlb_all = r6000_flush_tlb_all;
+	flush_tlb_mm = r6000_flush_tlb_mm;
+	flush_tlb_range = r6000_flush_tlb_range;
+	flush_tlb_page = r6000_flush_tlb_page;
+
+	load_pgd = r6000_load_pgd;
+	pgd_init = r6000_pgd_init;
+	update_mmu_cache = r6000_update_mmu_cache;
+
+	show_regs = r6000_show_regs;
+
+	flush_cache_all();
+	flush_tlb_all();
+}