patch-2.1.27 linux/drivers/net/soundmodem/sm.c
Next file: linux/drivers/net/soundmodem/sm.h
Previous file: linux/drivers/net/soundmodem/gentbl.c
Back to the patch index
Back to the overall index
- Lines: 816
- Date:
Fri Feb 21 14:58:35 1997
- Orig file:
v2.1.26/linux/drivers/net/soundmodem/sm.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.1.26/linux/drivers/net/soundmodem/sm.c linux/drivers/net/soundmodem/sm.c
@@ -0,0 +1,815 @@
+/*****************************************************************************/
+
+/*
+ * sm.c -- soundcard radio modem driver.
+ *
+ * Copyright (C) 1996 Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Please note that the GPL allows you to use the driver, NOT the radio.
+ * In order to use the radio, you need a license from the communications
+ * authority of your country.
+ *
+ *
+ * Command line options (insmod command line)
+ *
+ * mode mode string; eg. "wss:afsk1200"
+ * iobase base address of the soundcard; common values are 0x220 for sbc,
+ * 0x530 for wss
+ * irq interrupt number; common values are 7 or 5 for sbc, 11 for wss
+ * dma dma number; common values are 0 or 1
+ *
+ *
+ * History:
+ * 0.1 21.09.96 Started
+ * 18.10.96 Changed to new user space access routines (copy_{to,from}_user)
+ * 0.4 21.01.97 Separately compileable soundcard/modem modules
+ */
+
+/*****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/ioport.h>
+#include <linux/net.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include "sm.h"
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * currently this module is supposed to support both module styles, i.e.
+ * the old one present up to about 2.1.9, and the new one functioning
+ * starting with 2.1.21. The reason is I have a kit allowing to compile
+ * this module also under 2.0.x which was requested by several people.
+ * This will go in 2.2
+ */
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= 0x20100
+#include <asm/uaccess.h>
+#else
+#include <asm/segment.h>
+#include <linux/mm.h>
+
+#undef put_user
+#undef get_user
+
+#define put_user(x,ptr) ({ __put_user((unsigned long)(x),(ptr),sizeof(*(ptr))); 0; })
+#define get_user(x,ptr) ({ x = ((__typeof__(*(ptr)))__get_user((ptr),sizeof(*(ptr)))); 0; })
+
+extern inline int copy_from_user(void *to, const void *from, unsigned long n)
+{
+ int i = verify_area(VERIFY_READ, from, n);
+ if (i)
+ return i;
+ memcpy_fromfs(to, from, n);
+ return 0;
+}
+
+extern inline int copy_to_user(void *to, const void *from, unsigned long n)
+{
+ int i = verify_area(VERIFY_WRITE, to, n);
+ if (i)
+ return i;
+ memcpy_tofs(to, from, n);
+ return 0;
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+static const char sm_drvname[] = "soundmodem";
+static const char sm_drvinfo[] = KERN_INFO "soundmodem: (C) 1996 Thomas Sailer, HB9JNX/AE4WA\n"
+KERN_INFO "soundmodem: version 0.4 compiled " __TIME__ " " __DATE__ "\n";
+
+/* --------------------------------------------------------------------- */
+
+static const struct modem_tx_info *sm_modem_tx_table[] = {
+#ifdef CONFIG_SOUNDMODEM_AFSK1200
+ &sm_afsk1200_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2666
+ &sm_afsk2666_tx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
+#ifdef CONFIG_SOUNDMODEM_PSK4800
+ &sm_psk4800_tx,
+#endif /* CONFIG_SOUNDMODEM_PSK4800 */
+#ifdef CONFIG_SOUNDMODEM_HAPN4800
+ &sm_hapn4800_8_tx,
+ &sm_hapn4800_10_tx,
+ &sm_hapn4800_pm8_tx,
+ &sm_hapn4800_pm10_tx,
+#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
+#ifdef CONFIG_SOUNDMODEM_FSK9600
+ &sm_fsk9600_4_tx,
+ &sm_fsk9600_5_tx,
+#endif /* CONFIG_SOUNDMODEM_FSK9600 */
+ NULL
+};
+
+static const struct modem_rx_info *sm_modem_rx_table[] = {
+#ifdef CONFIG_SOUNDMODEM_AFSK1200
+ &sm_afsk1200_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK1200 */
+#ifdef CONFIG_SOUNDMODEM_AFSK2666
+ &sm_afsk2666_rx,
+#endif /* CONFIG_SOUNDMODEM_AFSK2666 */
+#ifdef CONFIG_SOUNDMODEM_PSK4800
+ &sm_psk4800_rx,
+#endif /* CONFIG_SOUNDMODEM_PSK4800 */
+#ifdef CONFIG_SOUNDMODEM_HAPN4800
+ &sm_hapn4800_8_rx,
+ &sm_hapn4800_10_rx,
+ &sm_hapn4800_pm8_rx,
+ &sm_hapn4800_pm10_rx,
+#endif /* CONFIG_SOUNDMODEM_HAPN4800 */
+#ifdef CONFIG_SOUNDMODEM_FSK9600
+ &sm_fsk9600_4_rx,
+ &sm_fsk9600_5_rx,
+#endif /* CONFIG_SOUNDMODEM_FSK9600 */
+ NULL
+};
+
+static const struct hardware_info *sm_hardware_table[] = {
+#ifdef CONFIG_SOUNDMODEM_SBC
+ &sm_hw_sbc,
+#endif /* CONFIG_SOUNDMODEM_SBC */
+#ifdef CONFIG_SOUNDMODEM_WSS
+ &sm_hw_wss,
+ &sm_hw_wssfdx,
+#endif /* CONFIG_SOUNDMODEM_WSS */
+ NULL
+};
+
+/* --------------------------------------------------------------------- */
+
+#define NR_PORTS 4
+
+/* --------------------------------------------------------------------- */
+
+static struct device sm_device[NR_PORTS];
+
+static struct {
+ char *mode;
+ int iobase, irq, dma, dma2, seriobase, pariobase, midiiobase;
+} sm_ports[NR_PORTS] = {
+ { NULL, -1, 0, 0, 0, -1, -1, -1 },
+};
+
+/* --------------------------------------------------------------------- */
+
+#define UART_RBR(iobase) (iobase+0)
+#define UART_THR(iobase) (iobase+0)
+#define UART_IER(iobase) (iobase+1)
+#define UART_IIR(iobase) (iobase+2)
+#define UART_FCR(iobase) (iobase+2)
+#define UART_LCR(iobase) (iobase+3)
+#define UART_MCR(iobase) (iobase+4)
+#define UART_LSR(iobase) (iobase+5)
+#define UART_MSR(iobase) (iobase+6)
+#define UART_SCR(iobase) (iobase+7)
+#define UART_DLL(iobase) (iobase+0)
+#define UART_DLM(iobase) (iobase+1)
+
+#define SER_EXTENT 8
+
+#define LPT_DATA(iobase) (iobase+0)
+#define LPT_STATUS(iobase) (iobase+1)
+#define LPT_CONTROL(iobase) (iobase+2)
+#define LPT_IRQ_ENABLE 0x10
+
+#define LPT_EXTENT 3
+
+#define MIDI_DATA(iobase) (iobase)
+#define MIDI_STATUS(iobase) (iobase+1)
+#define MIDI_READ_FULL 0x80 /* attention: negative logic!! */
+#define MIDI_WRITE_EMPTY 0x40 /* attention: negative logic!! */
+
+#define MIDI_EXTENT 2
+
+/* ---------------------------------------------------------------------- */
+
+#define PARAM_TXDELAY 1
+#define PARAM_PERSIST 2
+#define PARAM_SLOTTIME 3
+#define PARAM_TXTAIL 4
+#define PARAM_FULLDUP 5
+#define PARAM_HARDWARE 6
+#define PARAM_RETURN 255
+
+#define SP_SER 1
+#define SP_PAR 2
+#define SP_MIDI 4
+
+/* --------------------------------------------------------------------- */
+/*
+ * ===================== port checking routines ========================
+ */
+
+static int check_lpt(unsigned int iobase)
+{
+ unsigned char b1,b2;
+ int i;
+
+ if (iobase <= 0 || iobase > 0x1000-LPT_EXTENT)
+ return 0;
+ if (check_region(iobase, LPT_EXTENT))
+ return 0;
+ b1 = inb(LPT_DATA(iobase));
+ b2 = inb(LPT_CONTROL(iobase));
+ outb(0xaa, LPT_DATA(iobase));
+ i = inb(LPT_DATA(iobase)) == 0xaa;
+ outb(0x55, LPT_DATA(iobase));
+ i &= inb(LPT_DATA(iobase)) == 0x55;
+ outb(0x0a, LPT_CONTROL(iobase));
+ i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x0a;
+ outb(0x05, LPT_CONTROL(iobase));
+ i &= (inb(LPT_CONTROL(iobase)) & 0xf) == 0x05;
+ outb(b1, LPT_DATA(iobase));
+ outb(b2, LPT_CONTROL(iobase));
+ return !i;
+}
+
+/* --------------------------------------------------------------------- */
+
+enum uart { c_uart_unknown, c_uart_8250,
+ c_uart_16450, c_uart_16550, c_uart_16550A};
+static const char *uart_str[] =
+ { "unknown", "8250", "16450", "16550", "16550A" };
+
+static enum uart check_uart(unsigned int iobase)
+{
+ unsigned char b1,b2,b3;
+ enum uart u;
+ enum uart uart_tab[] =
+ { c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A };
+
+ if (iobase <= 0 || iobase > 0x1000-SER_EXTENT)
+ return c_uart_unknown;
+ if (check_region(iobase, SER_EXTENT))
+ return c_uart_unknown;
+ b1 = inb(UART_MCR(iobase));
+ outb(b1 | 0x10, UART_MCR(iobase)); /* loopback mode */
+ b2 = inb(UART_MSR(iobase));
+ outb(0x1a, UART_MCR(iobase));
+ b3 = inb(UART_MSR(iobase)) & 0xf0;
+ outb(b1, UART_MCR(iobase)); /* restore old values */
+ outb(b2, UART_MSR(iobase));
+ if (b3 != 0x90)
+ return c_uart_unknown;
+ inb(UART_RBR(iobase));
+ inb(UART_RBR(iobase));
+ outb(0x01, UART_FCR(iobase)); /* enable FIFOs */
+ u = uart_tab[(inb(UART_IIR(iobase)) >> 6) & 3];
+ if (u == c_uart_16450) {
+ outb(0x5a, UART_SCR(iobase));
+ b1 = inb(UART_SCR(iobase));
+ outb(0xa5, UART_SCR(iobase));
+ b2 = inb(UART_SCR(iobase));
+ if ((b1 != 0x5a) || (b2 != 0xa5))
+ u = c_uart_8250;
+ }
+ return u;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int check_midi(unsigned int iobase)
+{
+ unsigned long timeout;
+ unsigned long flags;
+ unsigned char b;
+
+ if (iobase <= 0 || iobase > 0x1000-MIDI_EXTENT)
+ return 0;
+ if (check_region(iobase, MIDI_EXTENT))
+ return 0;
+ timeout = jiffies + (HZ / 100);
+ while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
+ if ((signed)(jiffies - timeout) > 0)
+ return 0;
+ save_flags(flags);
+ cli();
+ outb(0xff, MIDI_DATA(iobase));
+ b = inb(MIDI_STATUS(iobase));
+ restore_flags(flags);
+ if (!(b & MIDI_WRITE_EMPTY))
+ return 0;
+ while (inb(MIDI_STATUS(iobase)) & MIDI_WRITE_EMPTY)
+ if ((signed)(jiffies - timeout) > 0)
+ return 0;
+ return 1;
+}
+
+/* --------------------------------------------------------------------- */
+
+void sm_output_status(struct sm_state *sm)
+{
+ int invert_dcd = 0;
+ int invert_ptt = 0;
+
+ int ptt = hdlcdrv_ptt(&sm->hdrv) ^ invert_ptt;
+ int dcd = (!!sm->hdrv.hdlcrx.dcd) ^ invert_dcd;
+
+ if (sm->hdrv.ptt_out.flags & SP_SER) {
+ outb(dcd | (ptt << 1), UART_MCR(sm->hdrv.ptt_out.seriobase));
+ outb(0x40 & (-ptt), UART_LCR(sm->hdrv.ptt_out.seriobase));
+ }
+ if (sm->hdrv.ptt_out.flags & SP_PAR) {
+ outb(ptt | (dcd << 1), LPT_DATA(sm->hdrv.ptt_out.pariobase));
+ }
+ if (sm->hdrv.ptt_out.flags & SP_MIDI && hdlcdrv_ptt(&sm->hdrv)) {
+ outb(0, MIDI_DATA(sm->hdrv.ptt_out.midiiobase));
+ }
+}
+
+/* --------------------------------------------------------------------- */
+
+static void sm_output_open(struct sm_state *sm)
+{
+ enum uart u = c_uart_unknown;
+
+ sm->hdrv.ptt_out.flags = 0;
+ if (sm->hdrv.ptt_out.seriobase > 0 &&
+ sm->hdrv.ptt_out.seriobase <= 0x1000-SER_EXTENT &&
+ ((u = check_uart(sm->hdrv.ptt_out.seriobase))) != c_uart_unknown) {
+ sm->hdrv.ptt_out.flags |= SP_SER;
+ request_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT, "sm ser ptt");
+ outb(0, UART_IER(sm->hdrv.ptt_out.seriobase));
+ /* 5 bits, 1 stop, no parity, no break, Div latch access */
+ outb(0x80, UART_LCR(sm->hdrv.ptt_out.seriobase));
+ outb(0, UART_DLM(sm->hdrv.ptt_out.seriobase));
+ outb(1, UART_DLL(sm->hdrv.ptt_out.seriobase)); /* as fast as possible */
+ /* LCR and MCR set by output_status */
+ }
+ if (sm->hdrv.ptt_out.pariobase > 0 &&
+ sm->hdrv.ptt_out.pariobase <= 0x1000-LPT_EXTENT &&
+ check_lpt(sm->hdrv.ptt_out.pariobase)) {
+ sm->hdrv.ptt_out.flags |= SP_PAR;
+ request_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT, "sm par ptt");
+ }
+ if (sm->hdrv.ptt_out.midiiobase > 0 &&
+ sm->hdrv.ptt_out.midiiobase <= 0x1000-MIDI_EXTENT &&
+ check_midi(sm->hdrv.ptt_out.midiiobase)) {
+ sm->hdrv.ptt_out.flags |= SP_MIDI;
+ request_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT,
+ "sm midi ptt");
+ }
+ sm_output_status(sm);
+
+ printk(KERN_INFO "%s: ptt output:", sm_drvname);
+ if (sm->hdrv.ptt_out.flags & SP_SER)
+ printk(" serial interface at 0x%x, uart %s", sm->hdrv.ptt_out.seriobase,
+ uart_str[u]);
+ if (sm->hdrv.ptt_out.flags & SP_PAR)
+ printk(" parallel interface at 0x%x", sm->hdrv.ptt_out.pariobase);
+ if (sm->hdrv.ptt_out.flags & SP_MIDI)
+ printk(" mpu401 (midi) interface at 0x%x", sm->hdrv.ptt_out.midiiobase);
+ if (!sm->hdrv.ptt_out.flags)
+ printk(" none");
+ printk("\n");
+}
+
+/* --------------------------------------------------------------------- */
+
+static void sm_output_close(struct sm_state *sm)
+{
+ /* release regions used for PTT output */
+ sm->hdrv.hdlctx.ptt = sm->hdrv.hdlctx.calibrate = 0;
+ sm_output_status(sm);
+ if (sm->hdrv.ptt_out.flags & SP_SER)
+ release_region(sm->hdrv.ptt_out.seriobase, SER_EXTENT);
+ if (sm->hdrv.ptt_out.flags & SP_PAR)
+ release_region(sm->hdrv.ptt_out.pariobase, LPT_EXTENT);
+ if (sm->hdrv.ptt_out.flags & SP_MIDI)
+ release_region(sm->hdrv.ptt_out.midiiobase, MIDI_EXTENT);
+ sm->hdrv.ptt_out.flags = 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_open(struct device *dev);
+static int sm_close(struct device *dev);
+static int sm_ioctl(struct device *dev, struct ifreq *ifr,
+ struct hdlcdrv_ioctl *hi, int cmd);
+
+/* --------------------------------------------------------------------- */
+
+static const struct hdlcdrv_ops sm_ops = {
+ sm_drvname, sm_drvinfo, sm_open, sm_close, sm_ioctl
+};
+
+/* --------------------------------------------------------------------- */
+
+static int sm_open(struct device *dev)
+{
+ struct sm_state *sm;
+ int err;
+
+ if (!dev || !dev->priv ||
+ ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+ printk(KERN_ERR "sm_open: invalid device struct\n");
+ return -EINVAL;
+ }
+ sm = (struct sm_state *)dev->priv;
+
+ if (!sm->mode_tx || !sm->mode_rx || !sm->hwdrv || !sm->hwdrv->open)
+ return -ENODEV;
+ sm->hdrv.par.bitrate = sm->mode_rx->bitrate;
+ err = sm->hwdrv->open(dev, sm);
+ if (err)
+ return err;
+ sm_output_open(sm);
+ MOD_INC_USE_COUNT;
+ printk(KERN_INFO "%s: %s mode %s.%s at iobase 0x%lx irq %u dma %u\n",
+ sm_drvname, sm->hwdrv->hw_name, sm->mode_tx->name,
+ sm->mode_rx->name, dev->base_addr, dev->irq, dev->dma);
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_close(struct device *dev)
+{
+ struct sm_state *sm;
+ int err = -ENODEV;
+
+ if (!dev || !dev->priv ||
+ ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+ printk(KERN_ERR "sm_close: invalid device struct\n");
+ return -EINVAL;
+ }
+ sm = (struct sm_state *)dev->priv;
+
+
+ if (sm->hwdrv && sm->hwdrv->close)
+ err = sm->hwdrv && sm->hwdrv->close(dev, sm);
+ sm_output_close(sm);
+ MOD_DEC_USE_COUNT;
+ printk(KERN_INFO "%s: close %s at iobase 0x%lx irq %u dma %u\n",
+ sm_drvname, sm->hwdrv->hw_name, dev->base_addr, dev->irq, dev->dma);
+ return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sethw(struct device *dev, struct sm_state *sm, char *mode)
+{
+ char *cp = strchr(mode, ':');
+ const struct hardware_info **hwp = sm_hardware_table;
+
+ if (!cp)
+ cp = mode;
+ else {
+ *cp++ = '\0';
+ while (hwp && (*hwp) && (*hwp)->hw_name && strcmp((*hwp)->hw_name, mode))
+ hwp++;
+ if (!hwp || !*hwp || !(*hwp)->hw_name)
+ return -EINVAL;
+ if ((*hwp)->loc_storage > sizeof(sm->hw)) {
+ printk(KERN_ERR "%s: insufficient storage for hw driver %s (%d)\n",
+ sm_drvname, (*hwp)->hw_name, (*hwp)->loc_storage);
+ return -EINVAL;
+ }
+ sm->hwdrv = *hwp;
+ }
+ if (!*cp)
+ return 0;
+ if (sm->hwdrv && sm->hwdrv->sethw)
+ return sm->hwdrv->sethw(dev, sm, cp);
+ return -EINVAL;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int sm_ioctl(struct device *dev, struct ifreq *ifr,
+ struct hdlcdrv_ioctl *hi, int cmd)
+{
+ struct sm_state *sm;
+ struct sm_ioctl bi;
+ unsigned long flags;
+ unsigned int newdiagmode;
+ unsigned int newdiagflags;
+ char *cp;
+ const struct modem_tx_info **mtp = sm_modem_tx_table;
+ const struct modem_rx_info **mrp = sm_modem_rx_table;
+ const struct hardware_info **hwp = sm_hardware_table;
+
+ if (!dev || !dev->priv ||
+ ((struct sm_state *)dev->priv)->hdrv.magic != HDLCDRV_MAGIC) {
+ printk(KERN_ERR "sm_ioctl: invalid device struct\n");
+ return -EINVAL;
+ }
+ sm = (struct sm_state *)dev->priv;
+
+ if (cmd != SIOCDEVPRIVATE) {
+ if (!sm->hwdrv || !sm->hwdrv->ioctl)
+ return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
+ return -ENOIOCTLCMD;
+ }
+ switch (hi->cmd) {
+ default:
+ if (sm->hwdrv && sm->hwdrv->ioctl)
+ return sm->hwdrv->ioctl(dev, sm, ifr, hi, cmd);
+ return -ENOIOCTLCMD;
+
+ case HDLCDRVCTL_GETMODE:
+ cp = hi->data.modename;
+ if (sm->hwdrv && sm->hwdrv->hw_name)
+ cp += sprintf(cp, "%s:", sm->hwdrv->hw_name);
+ else
+ cp += sprintf(cp, "<unspec>:");
+ if (sm->mode_tx && sm->mode_tx->name)
+ cp += sprintf(cp, "%s", sm->mode_tx->name);
+ else
+ cp += sprintf(cp, "<unspec>");
+ if (!sm->mode_rx || !sm->mode_rx ||
+ strcmp(sm->mode_rx->name, sm->mode_tx->name)) {
+ if (sm->mode_rx && sm->mode_rx->name)
+ cp += sprintf(cp, ",%s", sm->mode_rx->name);
+ else
+ cp += sprintf(cp, ",<unspec>");
+ }
+ if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
+ return -EFAULT;
+ return 0;
+
+ case HDLCDRVCTL_SETMODE:
+ if (!suser() || dev->start)
+ return -EACCES;
+ hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
+ return sethw(dev, sm, hi->data.modename);
+
+ case HDLCDRVCTL_MODELIST:
+ cp = hi->data.modename;
+ while (*hwp) {
+ if ((*hwp)->hw_name)
+ cp += sprintf("%s:,", (*hwp)->hw_name);
+ hwp++;
+ }
+ while (*mtp) {
+ if ((*mtp)->name)
+ cp += sprintf(">%s,", (*mtp)->name);
+ mtp++;
+ }
+ while (*mrp) {
+ if ((*mrp)->name)
+ cp += sprintf("<%s,", (*mrp)->name);
+ mrp++;
+ }
+ cp[-1] = '\0';
+ if (copy_to_user(ifr->ifr_data, hi, sizeof(*hi)))
+ return -EFAULT;
+ return 0;
+
+#ifdef SM_DEBUG
+ case SMCTL_GETDEBUG:
+ if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+ return -EFAULT;
+ bi.data.dbg.int_rate = sm->debug_vals.last_intcnt;
+ bi.data.dbg.mod_cycles = sm->debug_vals.mod_cyc;
+ bi.data.dbg.demod_cycles = sm->debug_vals.demod_cyc;
+ bi.data.dbg.dma_residue = sm->debug_vals.dma_residue;
+ sm->debug_vals.mod_cyc = sm->debug_vals.demod_cyc =
+ sm->debug_vals.dma_residue = 0;
+ if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+ return -EFAULT;
+ return 0;
+#endif /* SM_DEBUG */
+
+ case SMCTL_DIAGNOSE:
+ if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
+ return -EFAULT;
+ newdiagmode = bi.data.diag.mode;
+ newdiagflags = bi.data.diag.flags;
+ if (newdiagmode > SM_DIAGMODE_CONSTELLATION)
+ return -EINVAL;
+ bi.data.diag.mode = sm->diag.mode;
+ bi.data.diag.flags = sm->diag.flags;
+ bi.data.diag.samplesperbit = sm->mode_rx->sperbit;
+ if (sm->diag.mode != newdiagmode) {
+ save_flags(flags);
+ cli();
+ sm->diag.ptr = -1;
+ sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
+ sm->diag.mode = newdiagmode;
+ restore_flags(flags);
+ if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+ return -EFAULT;
+ return 0;
+ }
+ if (sm->diag.ptr < 0 || sm->diag.mode == SM_DIAGMODE_OFF) {
+ if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+ return -EFAULT;
+ return 0;
+ }
+ if (bi.data.diag.datalen > DIAGDATALEN)
+ bi.data.diag.datalen = DIAGDATALEN;
+ if (sm->diag.ptr < bi.data.diag.datalen) {
+ if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+ return -EFAULT;
+ return 0;
+ }
+ if (copy_to_user(bi.data.diag.data, sm->diag.data,
+ bi.data.diag.datalen * sizeof(short)))
+ return -EFAULT;
+ bi.data.diag.flags |= SM_DIAGFLAG_VALID;
+ save_flags(flags);
+ cli();
+ sm->diag.ptr = -1;
+ sm->diag.flags = newdiagflags & ~SM_DIAGFLAG_VALID;
+ sm->diag.mode = newdiagmode;
+ restore_flags(flags);
+ if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
+ return -EFAULT;
+ return 0;
+ }
+}
+
+/* --------------------------------------------------------------------- */
+
+#ifdef MODULE
+static
+#endif /* MODULE */
+int sm_init(void)
+{
+ int i, j, found = 0;
+ char set_hw = 1;
+ struct sm_state *sm;
+ char ifname[HDLCDRV_IFNAMELEN];
+
+ printk(sm_drvinfo);
+ /*
+ * register net devices
+ */
+ for (i = 0; i < NR_PORTS; i++) {
+ struct device *dev = sm_device+i;
+ sprintf(ifname, "sm%d", i);
+
+ if (!sm_ports[i].mode)
+ set_hw = 0;
+ if (!set_hw)
+ sm_ports[i].iobase = sm_ports[i].irq = 0;
+ j = hdlcdrv_register_hdlcdrv(dev, &sm_ops, sizeof(struct sm_state),
+ ifname, sm_ports[i].iobase,
+ sm_ports[i].irq, sm_ports[i].dma);
+ if (!j) {
+ sm = (struct sm_state *)dev->priv;
+ sm->hdrv.ptt_out.dma2 = sm_ports[i].dma2;
+ sm->hdrv.ptt_out.seriobase = sm_ports[i].seriobase;
+ sm->hdrv.ptt_out.pariobase = sm_ports[i].pariobase;
+ sm->hdrv.ptt_out.midiiobase = sm_ports[i].midiiobase;
+ if (set_hw && sethw(dev, sm, sm_ports[i].mode))
+ set_hw = 0;
+ found++;
+ } else {
+ printk(KERN_WARNING "%s: cannot register net device\n",
+ sm_drvname);
+ }
+ }
+ if (!found)
+ return -ENXIO;
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+#ifdef MODULE
+
+/*
+ * command line settable parameters
+ */
+static char *mode = NULL;
+static int iobase = -1;
+static int irq = -1;
+static int dma = -1;
+static int dma2 = -1;
+static int serio = 0;
+static int pario = 0;
+static int midiio = 0;
+
+#if LINUX_VERSION_CODE >= 0x20115
+
+MODULE_PARM(mode, "s");
+MODULE_PARM_DESC(mode, "soundmodem operating mode; eg. sbc:afsk1200 or wss:fsk9600");
+MODULE_PARM(iobase, "i");
+MODULE_PARM_DESC(iobase, "soundmodem base address");
+MODULE_PARM(irq, "i");
+MODULE_PARM_DESC(irq, "soundmodem interrupt");
+MODULE_PARM(dma, "i");
+MODULE_PARM_DESC(dma, "soundmodem dma channel");
+MODULE_PARM(dma2, "i");
+MODULE_PARM_DESC(dma2, "soundmodem 2nd dma channel; full duplex only");
+MODULE_PARM(serio, "i");
+MODULE_PARM_DESC(serio, "soundmodem PTT output on serial port");
+MODULE_PARM(pario, "i");
+MODULE_PARM_DESC(pario, "soundmodem PTT output on parallel port");
+MODULE_PARM(midiio, "i");
+MODULE_PARM_DESC(midiio, "soundmodem PTT output on midi port");
+
+MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
+MODULE_DESCRIPTION("Soundcard amateur radio modem driver");
+
+#endif
+
+int init_module(void)
+{
+ if (mode) {
+ if (iobase == -1)
+ iobase = (!strncmp(mode, "sbc", 3)) ? 0x220 : 0x530;
+ if (irq == -1)
+ irq = (!strncmp(mode, "sbc", 3)) ? 5 : 11;
+ if (dma == -1)
+ dma = 1;
+ }
+ sm_ports[0].mode = mode;
+ sm_ports[0].iobase = iobase;
+ sm_ports[0].irq = irq;
+ sm_ports[0].dma = dma;
+ sm_ports[0].dma2 = dma2;
+ sm_ports[0].seriobase = serio;
+ sm_ports[0].pariobase = pario;
+ sm_ports[0].midiiobase = midiio;
+ sm_ports[1].mode = NULL;
+
+ return sm_init();
+}
+
+/* --------------------------------------------------------------------- */
+
+void cleanup_module(void)
+{
+ int i;
+
+ printk(KERN_INFO "sm: cleanup_module called\n");
+
+ for(i = 0; i < NR_PORTS; i++) {
+ struct device *dev = sm_device+i;
+ struct sm_state *sm = (struct sm_state *)dev->priv;
+
+ if (sm) {
+ if (sm->hdrv.magic != HDLCDRV_MAGIC)
+ printk(KERN_ERR "sm: invalid magic in "
+ "cleanup_module\n");
+ else
+ hdlcdrv_unregister_hdlcdrv(dev);
+ }
+ }
+}
+
+#else /* MODULE */
+/* --------------------------------------------------------------------- */
+/*
+ * format: sm=io,irq,dma[,dma2[,serio[,pario]]],mode
+ * mode: hw:modem
+ * hw: sbc, wss, wssfdx
+ * modem: afsk1200, fsk9600
+ */
+
+void sm_setup(char *str, int *ints)
+{
+ int i;
+
+ for (i = 0; (i < NR_PORTS) && (sm_ports[i].mode); i++);
+ if ((i >= NR_PORTS) || (ints[0] < 3)) {
+ printk(KERN_INFO "%s: too many or invalid interface "
+ "specifications\n", sm_drvname);
+ return;
+ }
+ sm_ports[i].mode = str;
+ sm_ports[i].iobase = ints[1];
+ sm_ports[i].irq = ints[2];
+ sm_ports[i].dma = ints[3];
+ sm_ports[i].dma2 = (ints[0] >= 4) ? ints[4] : 0;
+ sm_ports[i].seriobase = (ints[0] >= 5) ? ints[5] : 0;
+ sm_ports[i].pariobase = (ints[0] >= 6) ? ints[6] : 0;
+ sm_ports[i].midiiobase = (ints[0] >= 7) ? ints[7] : 0;
+ if (i < NR_PORTS-1)
+ sm_ports[i+1].mode = NULL;
+}
+
+#endif /* MODULE */
+/* --------------------------------------------------------------------- */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov