patch-2.0.37 linux/drivers/block/ida_cmd.h
Next file: linux/drivers/block/ida_ioctl.h
Previous file: linux/drivers/block/hd.c
Back to the patch index
Back to the overall index
- Lines: 339
- Date:
Sun Jun 13 10:21:00 1999
- Orig file:
v2.0.36/linux/drivers/block/ida_cmd.h
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.0.36/linux/drivers/block/ida_cmd.h linux/drivers/block/ida_cmd.h
@@ -0,0 +1,338 @@
+/*
+ * Disk Array driver for Compaq SMART2 Controllers
+ * Copyright 1998 Compaq Computer Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to arrays@compaq.com
+ *
+ * If you want to make changes, improve or add functionality to this
+ * driver, you'll probably need the Compaq Array Controller Interface
+ * Specificiation (Document number ECG086/1198)
+ */
+#ifndef ARRAYCMD_H
+#define ARRAYCMD_H
+
+#include <asm/types.h>
+#if 0
+#include <linux/blkdev.h>
+#endif
+
+
+#define COMMAND_FIFO 0x04
+#define COMMAND_COMPLETE_FIFO 0x08
+#define INTR_MASK 0x0C
+#define INTR_STATUS 0x10
+#define INTR_PENDING 0x14
+
+#define FIFO_NOT_EMPTY 0x01
+#define FIFO_NOT_FULL 0x02
+
+#define BIG_PROBLEM 0x40
+#define LOG_NOT_CONF 2
+
+#pragma pack(1)
+typedef struct {
+ __u32 size;
+ __u32 addr;
+} sg_t;
+
+#define RCODE_NONFATAL 0x02
+#define RCODE_FATAL 0x04
+#define RCODE_INVREQ 0x10
+typedef struct {
+ __u16 next;
+ __u8 cmd;
+ __u8 rcode;
+ __u32 blk;
+ __u16 blk_cnt;
+ __u8 sg_cnt;
+ __u8 reserved;
+} rhdr_t;
+
+#define SG_MAX 32
+typedef struct {
+ rhdr_t hdr;
+ sg_t sg[SG_MAX];
+ __u32 bp;
+} rblk_t;
+
+typedef struct {
+ __u8 unit;
+ __u8 prio;
+ __u16 size;
+} chdr_t;
+
+#define CMD_RWREQ 0x00
+#define CMD_IOCTL_PEND 0x01
+#define CMD_IOCTL_DONE 0x02
+
+typedef struct cmdlist {
+ chdr_t hdr;
+ rblk_t req;
+ __u32 size;
+ int retry_cnt;
+ __u32 busaddr;
+ int ctlr;
+ struct cmdlist *prev;
+ struct cmdlist *next;
+ struct buffer_head *bh;
+ int type;
+} cmdlist_t;
+
+#define ID_CTLR 0x11
+typedef struct {
+ __u8 nr_drvs;
+ __u32 cfg_sig;
+ __u8 firm_rev[4];
+ __u8 rom_rev[4];
+ __u8 hw_rev;
+ __u32 bb_rev;
+ __u32 drv_present_map;
+ __u32 ext_drv_map;
+ __u32 board_id;
+ __u8 cfg_error;
+ __u32 non_disk_bits;
+ __u8 bad_ram_addr;
+ __u8 cpu_rev;
+ __u8 pdpi_rev;
+ __u8 epic_rev;
+ __u8 wcxc_rev;
+ __u8 marketing_rev;
+ __u8 ctlr_flags;
+ __u8 host_flags;
+ __u8 expand_dis;
+ __u8 scsi_chips;
+ __u32 max_req_blocks;
+ __u32 ctlr_clock;
+ __u8 drvs_per_bus;
+ __u16 big_drv_present_map[8];
+ __u16 big_ext_drv_map[8];
+ __u16 big_non_disk_map[8];
+ __u16 task_flags;
+ __u8 icl_bus;
+ __u8 red_modes;
+ __u8 cur_red_mode;
+ __u8 red_ctlr_stat;
+ __u8 red_fail_reason;
+ __u8 reserved[403];
+} id_ctlr_t;
+
+typedef struct {
+ __u16 cyl;
+ __u8 heads;
+ __u8 xsig;
+ __u8 psectors;
+ __u16 wpre;
+ __u8 maxecc;
+ __u8 drv_ctrl;
+ __u16 pcyls;
+ __u8 pheads;
+ __u16 landz;
+ __u8 sect_per_track;
+ __u8 cksum;
+} drv_param_t;
+
+#define ID_LOG_DRV 0x10
+typedef struct {
+ __u16 blk_size;
+ __u32 nr_blks;
+ drv_param_t drv;
+ __u8 fault_tol;
+ __u8 reserved;
+ __u8 bios_disable;
+} id_log_drv_t;
+
+#define ID_LOG_DRV_EXT 0x18
+typedef struct {
+ __u32 log_drv_id;
+ __u8 log_drv_label[64];
+ __u8 reserved[418];
+} id_log_drv_ext_t;
+
+#define SENSE_LOG_DRV_STAT 0x12
+typedef struct {
+ __u8 status;
+ __u32 fail_map;
+ __u16 read_err[32];
+ __u16 write_err[32];
+ __u8 drv_err_data[256];
+ __u8 drq_timeout[32];
+ __u32 blks_to_recover;
+ __u8 drv_recovering;
+ __u16 remap_cnt[32];
+ __u32 replace_drv_map;
+ __u32 act_spare_map;
+ __u8 spare_stat;
+ __u8 spare_repl_map[32];
+ __u32 repl_ok_map;
+ __u8 media_exch;
+ __u8 cache_fail;
+ __u8 expn_fail;
+ __u8 unit_flags;
+ __u16 big_fail_map[8];
+ __u16 big_remap_map[8];
+ __u16 big_repl_map[8];
+ __u16 big_act_spare_map[8];
+ __u8 big_spar_repl_map[128];
+ __u16 big_repl_ok_map[8];
+ __u8 big_drv_rebuild;
+ __u8 reserved[36];
+} sense_log_drv_stat_t;
+
+#define START_RECOVER 0x13
+
+#define ID_PHYS_DRV 0x15
+typedef struct {
+ __u8 scsi_bus;
+ __u8 scsi_id;
+ __u16 blk_size;
+ __u32 nr_blks;
+ __u32 rsvd_blks;
+ __u8 drv_model[40];
+ __u8 drv_sn[40];
+ __u8 drv_fw[8];
+ __u8 scsi_iq_bits;
+ __u8 compaq_drv_stmp;
+ __u8 last_fail;
+ __u8 phys_drv_flags;
+ __u8 phys_drv_flags1;
+ __u8 scsi_lun;
+ __u8 phys_drv_flags2;
+ __u8 reserved;
+ __u32 spi_speed_rules;
+ __u8 phys_connector[2];
+ __u8 phys_box_on_bus;
+ __u8 phys_bay_in_box;
+} id_phys_drv_t;
+
+#define BLINK_DRV_LEDS 0x16
+typedef struct {
+ __u32 blink_duration;
+ __u32 reserved;
+ __u8 blink[256];
+ __u8 reserved1[248];
+} blink_drv_leds_t;
+
+#define SENSE_BLINK_LEDS 0x17
+typedef struct {
+ __u32 blink_duration;
+ __u32 btime_elap;
+ __u8 blink[256];
+ __u8 reserved1[248];
+} sense_blink_leds_t;
+
+#define IDA_READ 0x20
+#define IDA_WRITE 0x30
+#define IDA_WRITE_MEDIA 0x31
+#define RESET_TO_DIAG 0x40
+#define DIAG_PASS_THRU 0x41
+
+#define SENSE_CONFIG 0x50
+#define SET_CONFIG 0x51
+typedef struct {
+ __u32 cfg_sig;
+ __u16 compat_port;
+ __u8 data_dist_mode;
+ __u8 surf_an_ctrl;
+ __u16 ctlr_phys_drv;
+ __u16 log_unit_phys_drv;
+ __u16 fault_tol_mode;
+ __u8 phys_drv_param[16];
+ drv_param_t drv;
+ __u32 drv_asgn_map;
+ __u16 dist_factor;
+ __u32 spare_asgn_map;
+ __u8 reserved[6];
+ __u16 os;
+ __u8 ctlr_order;
+ __u8 extra_info;
+ __u32 data_offs;
+ __u8 parity_backedout_write_drvs;
+ __u8 parity_dist_mode;
+ __u8 parity_shift_fact;
+ __u8 bios_disable_flag;
+ __u32 blks_on_vol;
+ __u32 blks_per_drv;
+ __u8 scratch[16];
+ __u16 big_drv_map[8];
+ __u16 big_spare_map[8];
+ __u8 ss_source_vol;
+ __u8 mix_drv_cap_range;
+ struct {
+ __u16 big_drv_map[8];
+ __u32 blks_per_drv;
+ __u16 fault_tol_mode;
+ __u16 dist_factor;
+ } MDC_range[4];
+ __u8 reserved1[248];
+} config_t;
+
+#define BYPASS_VOL_STATE 0x52
+#define SS_CREATE_VOL 0x53
+#define CHANGE_CONFIG 0x54
+#define SENSE_ORIG_CONF 0x55
+#define REORDER_LOG_DRV 0x56
+typedef struct {
+ __u8 old_units[32];
+} reorder_log_drv_t;
+
+#define LABEL_LOG_DRV 0x57
+typedef struct {
+ __u8 log_drv_label[64];
+} label_log_drv_t;
+
+#define SS_TO_VOL 0x58
+
+#define SET_SURF_DELAY 0x60
+typedef struct {
+ __u16 delay;
+ __u8 reserved[510];
+} surf_delay_t;
+
+#define SET_OVERHEAT_DELAY 0x61
+typedef struct {
+ __u16 delay;
+} overhead_delay_t;
+
+#define SET_MP_DELAY
+typedef struct {
+ __u16 delay;
+ __u8 reserved[510];
+} mp_delay_t;
+
+#define PASSTHRU_A 0x91
+typedef struct {
+ __u8 target;
+ __u8 bus;
+ __u8 lun;
+ __u32 timeout;
+ __u32 flags;
+ __u8 status;
+ __u8 error;
+ __u8 cdb_len;
+ __u8 sense_error;
+ __u8 sense_key;
+ __u32 sense_info;
+ __u8 sense_code;
+ __u8 sense_qual;
+ __u8 residual;
+ __u8 reserved[4];
+ __u8 cdb[12];
+} scsi_param_t;
+
+#pragma pack()
+
+#endif /* ARRAYCMD_H */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov