| Internet-Draft | RATS MultiVerifier | March 2025 |
| Deshpande, et al. | Expires 4 September 2025 | [Page] |
IETF RATS Architecture, defines the key role of a Verifier. In a complex system, this role needs to be performed by multiple Verfiers coordinating together to assess the full trustworthiness of an Attester. This document focuses on various topological patterns for a multiple Verifier system.¶
This note is to be removed before publishing as an RFC.¶
Source for this draft and an issue tracker can be found at https://github.com/ietf-rats/draft-deshpande-multi-verifier.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 4 September 2025.¶
Copyright (c) 2025 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
A Verifier plays a Central Role in any Remote Attestation System. A Verifier appraises the Attester and produces Attestation Results, which is essentially a verdict of attestation. The results are consumed by the Relying Party to conclude the trustworthiness of the Attester, prior to making any critical decisions about the Attester, such as admitting to network or releasing confidential resources to it. Attesters can come in wide varieties of shape and form. For example Attesters can be endpoints (edge or IoT devices) or complex machines in the cloud. Composite Attester Section 2.1, generate Evidence that consists of multiple parts. For example, in data center servers, it is not uncommon for separate attesting environments (AE) to serve a subsection of the entire machine. One AE might measure and attest to what was booted on the main CPU, while another AE might measure and attest to what was booted machine's GPU. Throughout this document we use the term Component Attester Section 2.1 to address the sub-entity or an individual layer which produces its own Evidence in a Composite Attester system.¶
A Verifier needs Reference Values and Endorsements from the supply chain actors (for example OEM/ODM) to conduct the appraisal of an Attester. Given the range of Component Attesters in a Composite Attester, it is possible that a single Verifier may not have all the capabilities or the information required to conduct the complete appraisal of the Composite Attester. In this case, multiple Verifiers need to collaborate to conclude the appraisal and produce the Attestation Results.¶
This document describes various topological patterns of multiple Verifiers that work in a coordinated manner to conduct appraisal of a Composite Attester to produce an Attestation Results.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This document uses terms and concepts defined by the RATS architecture. For a complete glossary, see Section 4 of [RFC9334].¶
Specifically this document heavily uses the terms Layered Attester Section 3.2 of [RFC9334] and Composite Device Section 3.3 of [RFC9334]¶
This document uses the following terms:¶
A Composite Attester is either a Composite Device or a Layered Attester or any composition involving a combination of one or more Composite Devices or Layered Attesters.¶
A Component Attester is a single Attester of a Composite Attester. For this document, a Component Attester is an entity which produces a single Evidence which can be appraised by a Verifier.¶
Evidence produced by a Composite Attester.¶
A Verifier which acts as a Main Verifier to receive Composite Evidence from a Composite Attester.¶
An Aggregated Attestation Results (AAR) refers to a collection of Attestation Results produced upon completion of appraisal of a Composite Attester.¶
A Composite Attester has multiple Component Attesters. Each Attester requires a different set of Verifiers. Hence multiple Verifiers collaborate to appraise a Composite Attester.¶
Figure below shows the block diagram of a Hierarchical Pattern.¶
The following sub-sections describe the various roles that exist in this pattern.¶
In this topological pattern, there is an Entity known as Lead Verifier.¶
Lead Verifier is the central entity in communication with the Attester (directly in passport model or indirectly via the Relying Party in background-check model). It receives Attestation Evidence from a Composite Attester. If the Composite Attestation Evidence is signed, then it validates the integrity of the Evidence by validating the signature. If signature verification fails, the Verification is terminated. Otherwise it performs the following steps.¶
Lead Verifier has the knowledge about the overall structure of the Composite Evidence. It decodes the Composite Evidence to extract the Component Attester Evidence. This may lead to "N" Evidence, one for each Component Attester.¶
Lead Verifier delegates each Component Attester Evidence to their own Verifier and receives Component Attester Attestation Results after successful Appraisal of Evidence.¶
Once the Lead Verifier receives Attestation Results from all the Verifiers, it combines the results from each Verifier to construct a Aggregated Attestation Results (AAR). The Lead verifier may apply its own policies and also add extra claims as part of its appraisal.¶
Lead Verifier conveys the AAR to the Attester (in Passport model) or to the Relying Party (in background check model).¶
The overall verdict may be dependent on the Appraisal Policy of the Lead Verifier.¶
In certain topologies, it is possible that only the Composite Evidence is signed to provide the overall integrity, while the individual Component Attester Evidence (example Evidence 1) is not protected. In such cases, the Lead Verifer upon processing of Composite Evidence may wrap the Component Attester Evidence (example Evidence 1) in a signed Conceptual Message Wrapper (CMW), and send it to each Verifier (example Verifier 1).¶
The role of a Component Attester Verifier is to receive Component Attester Evidence from the lead Verifier and produce Attestation Results to the Lead Verifier.¶
In this topology the Lead Verifier is fully trusted by Component Attester Verifiers (example Verifier 1).¶
Also, each of the Component Attester Verifier is fully trusted by the Lead Verifier. Lead Verifier is provisioned with the Trust Anchors for Verifier 1..N.¶
Figure below shows the block diagram of a Cascaded Pattern.¶
In this topological pattern, the Attestation Verification happens in sequence. Verifiers are cascaded to perform the Attestation Appraisal. Each Verifier in the chain possess the knowledge of the entire Composite Attester topology.¶
Attester may send the Composite Evidence(CE) to any of the Verifier (directly in the passport model, or indirectly via the Relying Party in the background-check model). The Verifier which processes the Composite Evidence, Verifies the signature on the Evidence, if present. It decodes the Composite Evidence performs Appraisal of the Component Attester whose Reference Values and Endorsements are in its database. Once the appraisal is complete, it forwards the Composite Evidence and partial Attestation Results to the subsequent Verifier.¶
The process is repeated, until the entire appraisal is complete. The last Verifier, i.e. Verifier-N, completes its Appraisal of the Component Attester Evidence and returns the complete Attestation Results to the N-1 Verifier, which passed Evidence to it. The N-1 Verifier then simply passes the Aggregated Attestation Results(AAR) from where it received its Combined Evidence. Alternatively, it may also modify the AAR based on the inspection of received AAR. For example, it may add its own Verifier Added Claims (policy claims) and produce a new AAR. The process is repeated, until the Verifier, which recieved the initial Evidence is reached. At this point in time the Aggregated Attestation Results are signed and the Aggregated Attestation Results are sent to the Attester (in Passport Model) or Relying Party (in background check model).¶
As shown in the picture, the partial results and Combined Evidence is transmitted to a chain of Verifier, till the Appraisal is complete. The Verifier combines the incoming partial results, combines the results from it own Evidence Appraisal and passes the Aggregated Attestation Results to the Verifier from which it receives Combined Evidence.¶
In the cascaded pattern, the communicating Verifiers fully trust each other. Each Verifier has the trust anchor for the Verifier it is communicating to (i.e. either sending information or receiving information). This prevents man in the middle attack for the partial Attestation Results received by a Verifier or a Aggregated Attestation Results (AAR) which it receives in the return path.¶
In the cascaded pattern, the RP may communicate with any Verifier and thus receive its Attestation Results. Hence RP fully trusts all the Verifiers.¶
In a particular deployment, there is a possibility that the two models presented above can be combined to produce a hybrid pattern. For example Verifier 2 in the Cascaded Pattern becomes the Lead Verifier for the remaining Verifers from 3, to N.¶
The Verifier needs to ensure that the claims included in the Evidence reflect the latest state of the Attester. As per RATS Architecture, the recommended freshness is ascertained using either Synchronised Clocks, Epoch IDs, or nonce, embedded in the Evidence. In the case of Hierarchical Pattern, the Verification of Freshness should be checked by the Lead Verifier.¶
In the Cascaded Pattern, the freshness is always checked by the first Verifier in communication with either the Attester (Passport Model) or Relying Party (Background Check Model).¶
TODO¶