============================================================================== README.ENG (emTeX DISTRIBUTION) VERSION: 25-Sep-1990 ============================================================================== With modifications of 23-Jun-1992 emTeX: TeX for OS/2, PC-DOS and MS-DOS ------------------------------------------------------------------------------ Preliminary remarks on the documentation ------------------------------------------------------------------------------ In order to use TeX or LaTeX, familiarity with the `programming language' TeX or LaTeX, respectively, is required. Thus in general the reading of [1], [2], [5] or [8] is unavoidable. As a brief introduction for beginners the LaTeX brief introduction of H. Partl (in German) may be used; it can be found on the disk after the installation of emTeX (details below). It cannot be used as a substitute for [2] or [5], however. Experience shows that trying to save time by not reading the documentation fails. This is especially true with TeX. ------------------------------------------------------------------------------ Book list ------------------------------------------------------------------------------ `Original works': [1] Donald E. Knuth: The TeXbook The standard work on TeX and plain TeX (in English). [2] Leslie Lamport: LaTeX: A Document Preparation System The standard work for LaTeX (in English). Supplemented by \emtex\texinput\local.tex and/or \emtex\doc\local.dvi. [3] Donald E. Knuth: The METAFONTbook The standard work for METAFONT (in English). [4] Michael J. Wichura: The PiCTeX Manual Manual for PiCTeX (in English). Obtainable (cost: US$30) from the TeX User's Group: TeX Users Group P. O. Box 9506 Providence, RI 02940 USA Phone: 401-751-7760 E-mail: tug@math.ams.com Further Books: [5] Helmut Kopka: LaTeX Eine Einfuehrung A manual for LaTeX in German. An English version is planned. [6] Helmut Kopka: LaTeX Erweiterungsmoeglichkeiten [7] Norbert Schwarz: Eine Einfuehrung in TeX [8] Norbert Schwarz: Introduction to TeX ------------------------------------------------------------------------------ Introduction ------------------------------------------------------------------------------ emTeX consists among others in the following: TeX The well-known text system by Donald E. Knuth LaTeX The well-known macro package for TeX by L. Lamport METAFONT `font compiler' by Donald E. Knuth dvidrv Printer driver and Screen Previewer TeXcad A program for drawing LaTeX picture environments All programs but TeXcad can be used under DOS as well as OS/2. TeXcad can be used only under DOS or in DOS mode of OS/2. The dvidrv printer drivers support the following printers: HP LaserJet+, HP LaserJet II, HP LaserJet III HP DeskJet, HP DeskJet+ Kyocera F-1010 NEC P6, P7, P2200 EPSON LQ, FX, and RX series Panasonic KX-P1124 Apple Imagewriter C.ITOH 8510A Tandy DMP-130 ...and many more dot matrix printers emTeX consists of several packages. Each single package is provided in the form of zip files, which have to be unpacked with the program pkunzip, which is also provided. Many packages are spread over several zip files, so that DSDD diskettes can be used. (But fonts are available only on HD diskettes.) The package DVIDRV, for example, is found in the files dvidrv1.zip, dvidrv2.zip, and dvidrv3.zip. On the other hand, the package PICTEX is found in the single file pictex.zip. ------------------------------------------------------------------------------ Diskettes ------------------------------------------------------------------------------ On delivery on HD diskettes (1200 KB or 1440 KB), the diskettes contain the following files: Diskette 1 ---------- pkz102.exe Compression program (self-unpacking program). pkunzip.exe Unpacking program (from pkz102.exe). delete.exe File deleting program. remove.exe Package removing program. readme.eng This file. readme.ger German version of this file. help.eng Frequently asked questions with answers (English). help.ger Frequently asked questions with answers (German). changes.eng Changes from older versions (English). changes.ger Changes from older versions (German). changes.pre Changes between the pre-releases of emTeX (German). tex1.zip TEX package, Part 1/2. tex2.zip TEX package, Part 2/2. Diskette 2 ---------- latex1.zip LATEX package, Part 1/2. latex2.zip LATEX package, Part 2/2. latexdoc.zip LATEXDOC package. texware.zip TEXWARE package. makeindx.zip MAKEINDX package. pictex.zip PICTEX package. blatex.zip BLATEX package. Diskette 3 ---------- dvidrv1.zip DVIDRV package, Part 1/3. dvidrv2.zip DVIDRV package, Part 2/3. dvidrv3.zip DVIDRV package, Part 3/3. texcad.zip TEXCAD package. bmf1.zip BMF package, Part 1/2. Diskette 4 ---------- mf1.zip MF package, Part 1/3. mf2.zip MF package, Part 2/3. mf3.zip MF package, Part 3/3. mfware1.zip MFWARE package, Part 1/2. Diskette 5 ---------- mfware2.zip MFWARE package, Part 2/2. pkedit.zip PKEDIT package. misc_mf.zip MISC_MF package. emsy.zip EMSY package. btex1.zip BTEX package, Part 1/2. btex2.zip BTEX package, Part 2/2. bmf2.zip BMF, Part 2/2. bibtex.zip BIBTEX package. Diskette 6 ---------- lkurz.zip LKURZ package. gtex.zip GTEX package. glatex.zip GLATEX package. gbtex.zip GBTEX package. gblatex.zip GBLATEX package. web.zip WEB package. dvidrvma.zip DVIDRVMA package. Further diskettes (the files fit on HD diskettes only) ------------------------------------------------------ If you don't have these diskettes, you should use MFjob to create the fonts. Font library files (*.fli): Name | Resolution| Diskettes | Printers | (DPI) | / Files | (among others) -----+-----------+-----------+------------------------------------------- LJ | 300 | 5 / 8 | HP LaserJet+, DeskJet, Kyocera F-1010 P6L | 180 | 3 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124 P6M | 360x180 | 4 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124 P6H | 360 | 6 / 8 | NEC P6, Panasonic KX P1124, EPSON LQ-550 FX | 240x216 | 4 / 7 | EPSON FX-80, Tandy DMP-130 ITO | 160x144 | 3 / 7 | C.ITOH 8510A, Apple Imagewriter ------------------------------------------------------------------------------ Packages ------------------------------------------------------------------------------ The size indications for the packages are given in KBytes (1024 bytes). If the cluster size of the disk is greater than 1 KByte, which is almost always the case, somewhat more space will be needed. BIBTEX contains: BibTeX (Bibliography database for LaTeX) requires: LATEX optional: --- files: 11 size: 323 BLATEX contains: LaTeX for bigTeX (extra big LaTeX) requires: TEX, BTEX, LATEX optional: --- files: 7 size: 499 BMF contains: bigMETAFONT (extra big METAFONT) requires: MF optional: --- files: 11 size: 1043 BTEX contains: bigTeX (extra big TeX) requires: TEX optional: BLATEX files: 9 size: 986 DVIDRV contains: Printer drivers and previewers (dvidrv) requires: --- optional: TEX files: 106 size: 1491 DVIDRVMA contains: Manual for the dvidrv drivers requires: DVIDRV, (EMSY) optional: --- files: 29 size: 511 EMSY *) contains: Special fonts of/for em requires: MF, TEX optional: LATEX files: 19 size: 25 GBLATEX contains: LaTeX for bigTeX (German hyphenation patterns) requires: TEX, BTEX, GTEX, LATEX, BLATEX, GLATEX optional: --- files: 7 size: 499 GBTEX contains: bigTeX (German hyphenation patterns) requires: TEX, BTEX, GTEX optional: GBLATEX files: 5 size: 316 GLATEX contains: LaTeX (German hyphenation) and brief LaTeX intro. requires: LATEX, GTEX optional: --- files: 8 size: 415 GTEX contains: Files for typesetting German texts requires: TEX optional: GLATEX files: 12 size: 312 LATEX contains: LaTeX (to be more exact: ILaTeX) requires: TEX optional: DVIDRV files: 78 size: 1141 LATEXDOC *) contains: doc files (documented sty files; obsolete) requires: LATEX optional: --- files: 26 size: 329 LKURZ *) contains: Source text for the brief LaTeX intro (German) requires: LATEX optional: --- files: 7 size: 94 MAKEINDX contains: MakeIndex (to sort LaTeX index) requires: LATEX optional: --- files: 5 size: 156 MF contains: METAFONT requires: MFWARE optional: --- files: 191 size: 1868 MFWARE contains: Auxiliary programs for METAFONT requires: MF optional: TEX, PKEDIT files: 44 size: 759 MISC_MF *) contains: Various font source texts requires: METAFONT optional: --- files: 5 size: 134 PICTEX contains: PiCTeX (graphic macros for TeX) requires: TEX optional: BLATEX (required for LaTeX) files: 5 size: 147 PKEDIT contains: Font editor requires: --- optional: MFWARE files: 4 size: 100 TEX contains: emTeX (plain TeX) requires: --- optional: DVIDRV files: 104 size: 1110 TEXCAD contains: TeXcad (drawing program for LaTeX picture environment) requires: --- optional: --- files: 18 size: 244 TEXWARE contains: Auxiliary programs for TeX requires: TEX optional: --- files: 11 size: 439 WEB *) contains: The WEB programming system (TANGLE, WEAVE, ...) requires: TEX optional: --- files: 7 size: 255 The packages with *) are usually not installed. ------------------------------------------------------------------------------ Directions for pkunzip ------------------------------------------------------------------------------ The program pkunzip is part of a program package from PKWARE. It is installed as follows on a disk (for example in the directory c:\pk): md c:\pk a:pkz102 c:\pk These lines mean the following: md c:\pk Make the directory a:pkz102 Load the self-unpacking program on drive a: c:\pk Target directory Please observe the license conditions at the end of manual.doc (contained in pkz102.exe)! The contents of a zip file (here dvidrvma.zip) can be displayed as follows: pkunzip -vb a:dvidrvma These lines have the following meaning: pkunzip Call the unpacking program -vb List the contents of a zip file (brief listing) a:dvidrvma zip file ------------------------------------------------------------------------------ Installation ------------------------------------------------------------------------------ First read this file (readme.eng) in its entirety. Then you should read the license conditions at the end of manual.doc (contained in pkz102.exe) for pkzip/pkunzip. (And follow the conditions.) For the installation, the program pkunzip.exe should be copied onto the disk. A directory should be used that is in the path for executables (PATH). For OS/2 users: There is also an OS/2 version of pkzip/pkunzip, but this is not supplied with emTeX. If you do not have this, you have to use pkunzip in the DOS compatibility environment. All of the following examples assume that emTeX is to be installed on drive c: (You can however install emTeX on another disk, if there is enough space.) In case an older version of emTeX is already installed on the disk, this should first be removed. First the files you have modified should be saved (usually only batch and configuration files). Moreover, before removing emTeX from the disk, the diskettes should be checked for readability, for example with pkunzip -t a:* These lines have the following meaning: pkunzip Call the unpacking program -t Check the zip files a:* All the zip files on drive a: The removal of emTeX is done with the program delete, which is supplied on the first diskette. This is done as follows (drive c:): a:delete -sd c:\emtex\*.* These lines have the following meaning: a: Load the program from diskette (first diskette!) delete Call the file deletion program -s Also delete in subdirectories -d Remove directories c:\emtex\*.* Files to be removed Since by this procedure all files in the directory \emtex and in all subdirectories of this directory will be deleted, you should not use this directory for your own files! Now the individual packages can be installed. The following packages are usually installed (the packages in parentheses do not have to be installed): TeX: TEX, DVIDRV, (PICTEX), (TEXWARE) LaTeX: TEX, DVIDRV, LATEX, (BIBTEX), (TEXWARE), (MAKEINDX) METAFONT: MF, MFWARE, (PKEDIT), (TEX) For example, to install the package LATEX from drive a: onto disk c:, the following should be entered: pkunzip -d -o a:latex? c:\ This line means the following: pkunzip Call the unpacking program -d Use directories stored in zip file -o Overwrite existing files a:latex? Unpack the package LATEX (latex1.zip, ...) c:\ Target path In this way the files will automatically be copied into the right directories. After installation you should read (or print and read) the following files: \emtex\doc\english\texware.doc (TEX package, English) \emtex\doc\german\texware.doc (TEX package, German) \emtex\doc\english\dvidrv.doc (DVIDRV package, English) \emtex\doc\german\dvidrv.doc (DVIDRV package; do not print out; see below!) Moreover, the license conditions in the following files should be observed: \emtex\doc\makeindx.cpy (MAKEINDX package) \emtex\texinput\ghyphen.min (GTEX package) \emtex\texinput\ghyphen.max (GTEX package) If you have installed the package DVIDRV and have followed the directions in the part `Installation of the printer driver and screen previewer' of this file, then you should install the package DVIDRVMA. This enables you to print out the `real' manual for the package DVIDRV (as opposed to dvidrv.doc), if you have available a suitable printer. After printing the manual you can again delete the files taken from DVIDRVMA (see below). If you cannot, or do not want to, print the dvidrv manual, then you have to content yourself with the indications in dvidrv.doc. After the installation of DVIDRV you can print out the other instructions (or look at them on the screen). Reading \emtex\doc\english\emtex.dvi (TEX package) \emtex\doc\local.dvi (LATEX package) is especially recommended. In order to use TeX or METAFONT, various environment variables still have to be set; see the section `Environment Variables' further below in this file. If you want to use LaTeX together with PiCTeX, then bigTeX has to be used. This is a bigger (but slower) version of emTeX. At present only a preliminary version is available. A brief introduction to LaTeX, in German, is found in the package GLATEX. Among the files delivered is the macro package german.sty of H. Partl; if you want to typeset German or other non-English texts with TeX or LaTeX, you should read the corresponding instruction \emtex\doc\germdoc.dvi. Since there are some files which you will not need, you should write a batch file to delete the ones not needed. In this way you can save some work in the next installation of emTeX. For example, if you work under DOS, you will not need the OS/2 versions of TeX and METAFONT. It is also possible to extract single files from a zip file; see manual.doc in pkz102.exe. Example: pkunzip -d a:pkedit c:\ emtex\pkedit.exe This line means the following: pkunzip Call the unpacking program -d Use directories stored in zip file a:pkedit Unpack the package PKEDIT c:\ Target path emtex\pkedit.exe File name (without leading backslash!) You'll find some frequently asked questions with answers in the file help.eng (and help.ger) on the first diskette. Before asking the author, you should read help.eng. ------------------------------------------------------------------------------ Removing a package ------------------------------------------------------------------------------ You can remove a package from the hard disk if the appropriate REM file is supplied - these files will appear in emTeX sets made available after 2nd May 1990. To remove a package the program `remove', on the first disk, is needed. If, for example, you want to remove the DVIDRVMA package from the C: drive you would enter the following commands: a:remove c:\emtex\remove\dvidrvma.rem c:\ where a: load the program from the first disk remove run the package removal program c:\emtex\remove\dvidrvma.rem the list of files comprising the package c:\ remove the package from this disk ------------------------------------------------------------------------------ Directories ------------------------------------------------------------------------------ The following directories are created during the installation (see also emtex.dvi, local.dvi, texware.doc, and mfware.doc): \emtex Programs, batch files, and configuration files. \emtex\doc Instructions and Manuals. The texts in this directory are available in only one language (English or German). \emtex\doc\english English Instructions and Manuals. \emtex\doc\german German Instructions and Manuals. \emtex\doc\gr180 Graphic files for the dvidrv manual (180 DPI). \emtex\doc\gr300 Graphic files for the dvidrv manual (300 DPI). \emtex\doc\gr360 Graphic files for the dvidrv manual (360 DPI). \emtex\texfmts TeX format files (macro packages in a fast-loading format; for example, plain and LaTeX) and tex.poo. \emtex\btexfmts bigTeX format files (macro packages in a fast-loading format; for example, plain and LaTeX) and tex.poo. \emtex\tfm tfm files (TeX font metrics; font descriptions). \emtex\texinput Texts which will be read by TeX (and BibTeX). \emtex\bibinput Bibliography database for BibTeX. \emtex\mfinput Texts which will be read by METAFONT (and MFT). \emtex\mfbases METAFONT base files (macro packages in a fast-loading format; for example plain and cm) and mf.poo. \emtex\bmfbases bigMETAFONT base files (macro packages in a fast-loading format; for example plain and cm) and mf.poo. \emtex\mfjob mfj files (see MFjob). \emtex\remove Package contents listings used by the remove program. ------------------------------------------------------------------------------ Environment variables and config.sys ------------------------------------------------------------------------------ In this section it is assumed that TeX has been installed on drive C:. You should set the environment variables for TeX as follows: set texinput=c:\emtex\texinput set tfm=c:\emtex\tfm set texfmt=c:\emtex\texfmts set btexfmt=c:\emtex\btexfmts (only for bigTeX) set textfm=c:\emtex\tfm set bibinput=c:\emtex\bibinput The environment variables for METAFONT and MFjob are set as follows: set mfinput=c:\emtex\mfinput set mfbas=c:\emtex\mfbases set bmfbas=c:\emtex\bmfbases (only for bigMETAFONT) set mfjob=c:\emtex\mfjob In addition, the directory c:\emtex should be put in the search path, for example: path c:\bin;c:\emtex All of these lines should be put in the file autoexec.bat (file config.sys for OS/2). The file \emtex\set-tex.bat (\emtex\set-tex.cmd in OS/2) can be used as a model, or modified and called by autoexec.bat. If the computer complains about not enough environment space, you should consult your DOS manual concerning the SHELL command in the config.sys file and concerning the /E and /P options of the program COMMAND.COM. If you put all emTeX directories on ONE drive and if the directories are organzied as recommended (and as stored in the zip files), it will be sufficient to set the environment variable EMTEXDRV (besides PATH): set emtexdrv=c This causes all programs (but dvidrv) to use the default directories on drive C:. The config.sys file should specify at least FILES=20 BUFFERS=20 greater values are allowed. Under OS/2, the line IOPL=YES is required in config.sys for dviscr and pkedit. ------------------------------------------------------------------------------ Installation of the printer drivers and the screen previewers ------------------------------------------------------------------------------ 1. Install the DVIDRV package. 2. Copy the fonts to the disk. For example, to install them on drive d: do as follows: md d:\texfonts copy a:*.fli d:\texfonts The last line has to be repeated for all suitable font diskettes. The fonts should if possible not be put into a directory under \emtex, in order to simplify the installation of a new version of emTeX (that is, without having to copy the fonts again to the disk). 3. The following environment variables should be set: dvidrvinput Search path for dvi files. dvidrvfonts Search path for fli files. dvidrvgraph Search path for graphic files. For example, this can be done by set dvidrvinput=c:\mytex;c:\emtex\doc set dvidrvfonts=d:\texfonts set dvidrvgraph=c:\mytex;c:\emtex\doc\gr$r The directory c:\emtex\doc resp. c:\emtex\doc\gr$r is used for printing the dvidrv manual. The value stored in DVIDRVFONTS will have the following appended to it by prtp6l.bat, for example ($r will be replaced by the resolution): \pixel.p6l\$rdpi Therefore only a directory should be given, and this must not end with a \. All these lines should be put in the file autoexec.bat (for OS/2 config.sys). \emtex\set-tex.bat or \emtex\set-tex.cmd can be used as models, or modified and called by autoexec.bat. Important: $r and $s must be written in small letters. If you don't want to set the environment variables (or if you cannot), you have to insert the desired directories into the configuration files (*.cnf) after renaming. 4. To use dviscr under OS/2, you should insert the line IOPL=YES into config.sys. If you don't need the OS/2 spooler, you should disable it. 4. Now the following batch files can be used: v Screen previewer (dviscr). vs Screen previewer (dviscrs). prthplj Printer driver (dvihplj: HP LaserJet+). prthplj /od Printer driver (dvihplj: HP DeskJet). prthplj /ok Printer driver (dvihplj: Kyocera F-1010). prtp6l Printer driver (dvidot p6l: P6 with 180 DPI). prtp6m Printer driver (dvidot p6m: P6 with 360x180 DPI). prtp6h Printer driver (dvidot p6h: P6 with 360 DPI). prtfx Printer driver (dvidot fx: EPSON FX-80). prtlql Printer driver (dvidot lql: EPSON LQ, 180 DPI). prtlqm Printer driver (dvidot lqm: EPSON LQ, 360x180 DPI). prtlqh Printer driver (dvidot lqh: EPSON LQ, 360 DPI). Note: not all LQ printers support 360 DPI. prtitoh Printer driver (dvidot itoh: C.ITOH 8510A). prtaiw Printer driver (dvidot aiw: Apple Imagewriter). msplj Create graphic files (Parameters: lj.cnf) mspp6l Create graphic files (Parameters: p6l.cnf) mspp6m Create graphic files (Parameters: p6m.cnf) mspp6h Create graphic files (Parameters: p6h.cnf) mspfx Create graphic files (Parameters: fx.cnf) mspito Create graphic files (Parameters: ito.cnf) If you have a version of DOS prior to 3.3, then you should change the first line of these batch files from @echo off to echo off The batch files v.cmd, v.bat and vs.bat use the configuration file lj.cnf (LJ fonts). If another configuration file is to be used, then these batch files have to be changed correspondingly. If you don't have the correct font files for your printer, the drivers can reduce the existing font files in certain cases (marked with * in the table below; loss of quality!). Gray mode is recommended for dviscr. Example: Use @p6m.cnf /ox2 instead of @p6l_p6m.cnf with dviscr. This is the table of configuration files: File name | Resolution | Fonts | Font resolution -------------+------------+---------+----------------- lj.cnf | 300 | LJ | 300 p6l.cnf | 180 | P6L | 180 p6l_p6m.cnf *| 180 | P6M | 360x180 p6l_p6h.cnf *| 180 | P6H | 360 p6m.cnf | 360x180 | P6M | 360x180 p6m_p6h.cnf *| 360x180 | P6H | 360 p6h.cnf | 360 | P6H | 360 fx.cnf | 240x216 | FX | 240x216 ito.cnf | 160x144 | ITO | 160x144 6. Justify the margins. This procedure is described in dvidrv.doc under /la#. The /la# and /ta# options should be put in the respective prt*.cmd/bat files. 7. If you're using a NEC P7, EPSON FX-100 or another wide (13.6") printer, you have to modify the batch files prt*.cmd resp. prt*.bat. Examples: prtfx.bat/cmd: old: dvidot fx80 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 new: dvidot fx100 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 prtlql.bat/cmd: old: dvidot lql @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 new: dvidot lqwl @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 prtp6h.bat/cmd: old: dvidot p6h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 new: dvidot p7h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 8. Print the dvidrv manual (German): Install the DVIDRVMA package and follow the instructions in dvidrvma.doc. 9. If you need (and have) the big fonts for SliTeX, you have to change the configuration file(s) to include the extra font library file. Example (lj.cnf): old: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b new: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b;lj_sli ------------------------------------------------------------------------------ Further sources of information ------------------------------------------------------------------------------ The following files contain further information (dvi files can be looked at on the screen with a screen previewer, or printed with a printer driver): \emtex\doc\english\texware.doc (TEX package, English) \emtex\doc\german\texware.doc (TEX package, German) Calling TeX and its associated programs. \emtex\doc\germdoc.dvi (GTEX package, German, 4 pages) Instructions for german.sty. \emtex\doc\english\emtex.dvi (TEX package, English, 8 pages) \emtex\doc\german\emtex.dvi (TEX package, German, 12 pages) Instructions for emTeX. \emtex\doc\latex.bug (LATEX package, English) Changes and known mistakes in LaTeX. \emtex\doc\local.gid (LATEX package, English) Ultra brief instructions for LaTeX. \emtex\doc\local.dvi (LATEX package, English, 20 pages) Implementation specific instructions for LaTeX. \emtex\doc\lkurz.dvi (GLATEX package, German, 46 pages) Brief instructions for LaTeX by H.Partl. \emtex\doc\english\mfware.doc (MF package, English) \emtex\doc\german\mfware.doc (MF package, German) Calling METAFONT and its associated programs. \emtex\doc\english\mfjob.doc (MFWARE package, English) \emtex\doc\german\mfjob.doc (MFWARE package, German) Instructions for the MFjob program. \emtex\doc\english\dvidrvma.doc (DVIDRVMA package, English) \emtex\doc\german\dvidrvma.doc (DVIDRVMA package, German) Instructions for printing the dvidrv manual. \emtex\doc\english\dvidrv.dvi (DVIDRVMA package, English, 45 pp.) \emtex\doc\german\dvidrv.dvi (DVIDRVMA package, German, 58 pages) Manual for the dvidrv drivers. \emtex\doc\english\dvidrv.doc (DVIDRV package, English) \emtex\doc\german\dvidrv.doc (DVIDRV package, German) Instructions for the dvidrv drivers. Pay special attention to the end (changes with respect to earlier versions). \emtex\doc\english\fontlib.doc (DVIDRV package, English) \emtex\doc\german\fontlib.doc (DVIDRV package, German) Instructions for the fontlib program. \emtex\doc\english\makedot.doc (DVIDRV package, English) \emtex\doc\german\makedot.doc (DVIDRV package, German) Provisional instructions for makedot. This is a supplement to dvidot.doc. \emtex\doc\web.doc (WEB package, German) Calling the programs of the WEB system. \emtex\doc\english\pkedit.doc (PKEDIT package, English) \emtex\doc\german\pkedit.doc (PKEDIT package, German) Instructions for the pkedit program. \emtex\doc\english\tcman.dvi (TEXCAD package, English, 13 pages) \emtex\doc\german\tcman.dvi (TEXCAD package, German, 14 pages) The TeXcad manual. \emtex\texinput\webman.tex (WEB package, English) Manual for the WEB system. \emtex\texinput\makeindx.tex (MAKEINDX package, English) Instructions for MakeIndex. \emtex\doc\makeindx.doc (MAKEINDX package, English) Detailed instructions for MakeIndex. \emtex\doc\english\texchk.doc (TEXWARE package, English) \emtex\doc\german\texchk.doc (TEXWARE package, German) Instructions for texchk. ------------------------------------------------------------------------------ File names in the emTeX system ------------------------------------------------------------------------------ .aux Auxiliary file created and used by LaTeX .bak Backup file (fontlib, pkedit) .bas Fast-loading file for METAFONT (no, not BASIC) .bat Batch file (DOS) .bbl Output file of BibTeX .bgi Video graphics driver (used by TeXcad) .bib Bibliography database for BibTeX .blg Transcript file (BibTeX) .bst Bibliography style for BibTeX .bug List of bugs .ch Change file (TANGLE, WEAVE and MFT) .chr Readable form of a pxl file (PXtoCH and CHtoPX) .cmd Batch file (OS/2) .cnf Configuration file for dvidrv .dlg Transcript file (dvidrv) .doc Instructions (straight text) or commented sty file .dot Parameter file for dvidot .dvi Device independent output of TeX .err Error messages and warnings (dvidrv) .exe Executable program .fli Font library file (dvidrv) .fmt Fast-loading file for TeX .gf Font file created by METAFONT (usually .#gf) .gft Default extension for the output of GFtype .glo LaTeX auxiliary file for \glossary .hlp On-line help .idx Index entries (created by LaTeX) .ilg MakeIndex transcript file .ind Index entries (created by MakeIndex) .lof LaTeX auxiliary file for \listoffigures .log Transcript file (TeX and METAFONT) .lot LaTeX auxiliary file for \listoftables .mac TeXcad macro file .mf Source text for a font .mfj Job file for MFjob .mft Style file for MFT .msp Graphic file .opt TeXcad parameters .ovl Overlay .pas Pascal source file (TANGLE) .pcx Graphic file .pic Picture environment created by TeXcad .pk Compressed font file .pkt Default extension for the output of PKtype .pl Readable form of a tfm file .poo String pool for INITEX or INIMF (pool file) .pxl Font file .rem Package contents listing for the remove program .sty Document style or document style option for LaTeX .sub Font substitution file (dvidrv) .tcp TeX code page (translation of code pages and special characters) .tex TeX text .tfm Symbol widths and other properties of a font (font metrics) .toc Notes of LaTeX for contents .ver List of program versions (TeXcad) .vf Virtual font (dvidrv, VFtoVP, VPtoVF) .vpl Readable form of a vf file (VFtoVP and VPtoVF) .web WEB source text (TANGLE and WEAVE) .zip Archive file (collection of compressed files) (No claim as to completeness.) ------------------------------------------------------------------------------ File list ------------------------------------------------------------------------------ The abbreviation CM stands for Computer Modern. A `*' at the beginning of a line denotes a change from the emTeX distribution of 29-Mar-1990, and a '+' marks a newly added file. BIBTEX package -------------- * \emtex\bibtex.exe BibTeX \emtex\bibinput\btxdoc.bib Bibliography database for btxdoc.tex \emtex\bibinput\xampl.bib Database of examples \emtex\texinput\abbrv.bst Bibliography style `abbrv' \emtex\texinput\alpha.bst Bibliography style `alpha' \emtex\texinput\plain.bst Bibliography style `plain' \emtex\texinput\unsrt.bst Bibliography style `unsrt' \emtex\texinput\btxbst.doc Source file for plain Bibliography Styles \emtex\texinput\btxdoc.tex Instructions for BibTeX \emtex\texinput\btxhak.tex Instructions: creating Bibliography Styles + \emtex\remove\bibtex.rem Package contents listing for `remove' BLATEX package -------------- \emtex\blatex.bat Calling LaTeX (American hyphenation) \emtex\blatex.cmd Calling LaTeX (American hyphenation) * \emtex\btexfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation) * \emtex\btexfmts\lplain.log log file of lplain.fmt + \emtex\btexfmts\slifmt.cmd Create fmt file for SliTeX + \emtex\btexfmts\slifmt.bat Create fmt file for SliTeX + \emtex\remove\blatex.rem Package contents listing for `remove' BMF package ----------- * \emtex\bmf.exe BigMETAFONT (DOS) * \emtex\bmf286.exe BigMETAFONT (DOS, 80286 CPU) * \emtex\bmfp.exe BigMETAFONT (OS/2 protected mode) \emtex\bmfbases\bas.bat Create bas files \emtex\bmfbases\bas.cmd Create bas files * \emtex\bmfbases\cm.bas Computer Modern METAFONT base * \emtex\bmfbases\cm.log log file to cm.bas * \emtex\bmfbases\mf.poo Pool file (string list) for INIMF * \emtex\bmfbases\plain.bas plain METAFONT base * \emtex\bmfbases\plain.log log file of plain.bas + \emtex\remove\bmf.rem Package contents listing for `remove' BTEX package ------------ * \emtex\btex.exe BigTeX (DOS) * \emtex\btex286.exe BigTeX (DOS, 80286 CPU) * \emtex\btexp.exe BigTeX (OS/2 protected mode) * \emtex\btexfmts\fmt.bat Create fmt files * \emtex\btexfmts\fmt.cmd Create fmt files * \emtex\btexfmts\plain.fmt plain TeX (American hyphenation) * \emtex\btexfmts\plain.log log file of plain.fmt * \emtex\btexfmts\tex.poo Pool file (string list) for INITeX + \emtex\remove\btex.rem Package contents listing for `remove' DVIDRV package -------------- + \emtex\doc\english\dvidrv.doc Instructions for dvidrv (English) * \emtex\doc\german\dvidrv.doc Instructions for dvidrv (German) + \emtex\doc\english\pcltomsp.doc Instructions for PCLtoMSP (English) * \emtex\doc\german\pcltomsp.doc Instructions for PCLtoMSP (German) + \emtex\doc\english\makedot.doc Instructions for makedot (English) + \emtex\doc\german\makedot.doc Instructions for makedot (German) + \emtex\doc\english\fontlib.doc Instructions for fontlib (English) * \emtex\doc\german\fontlib.doc Instructions for fontlib (German) \emtex\doc\adjust.dvi dvi file for adjusting margins + \emtex\dvidrv.err Error messages and warnings * \emtex\dviscr.exe Screen previewer * \emtex\dviscrs.exe Screen previewer (DOS and small memory) * \emtex\dvihplj.exe Driver for HP LaserJet+ + \emtex\dvidot.exe Generic dot-matrix printer driver * \emtex\dvimsp.exe Create graphic files from dvi files * \emtex\dvivik.exe Screen Previewer for Viking I + \emtex\makedot.exe Convert dvidot parameter files \emtex\fontlib.exe Create and maintain font library files * \emtex\pcltomsp.exe Convert pcl files to graphic files + \emtex\fx80.dot Parameter file for EPSON FX-80 + \emtex\fx100.dot Parameter file for EPSON FX-100 + \emtex\aiw.dot Parameter file for Apple Imagewriter + \emtex\itoh.dot Parameter file for C.ITOH 8510A + \emtex\p6l.dot Parameter file for NEC P6 (180 DPI) + \emtex\p6m.dot Parameter file for NEC P6 (360x180 DPI) + \emtex\p6h.dot Parameter file for NEC P6 (360 DPI) + \emtex\p7l.dot Parameter file for NEC P7 (180 DPI) + \emtex\p7m.dot Parameter file for NEC P7 (360x180 DPI) + \emtex\p7h.dot Parameter file for NEC P7 (360 DPI) + \emtex\lql.dot Parameter file for EPSON LQ (180 DPI) + \emtex\lqm.dot Parameter file for EPSON LQ (360x180 DPI) + \emtex\lqh.dot Parameter file for EPSON LQ (360 DPI) + \emtex\lqwl.dot Parameter file for EPSON LQ (180 DPI) + \emtex\lqwm.dot Parameter file for EPSON LQ (360x180 DPI) + \emtex\lqwh.dot Parameter file for EPSON LQ (360 DPI) + \emtex\dmp130.dot Parameter file for Tandy DMP-130 + \emtex\ibm4201.dot Parameter file for IBM 4201 (240x216 DPI) + \emtex\ibm4202.dot Parameter file for IBM 4202 (240x216 DPI) + \emtex\ibm4207l.dot Parameter file for IBM 4207 (180 DPI) + \emtex\ibm4207m.dot Parameter file for IBM 4207 (360x180 DPI) + \emtex\ibm4208l.dot Parameter file for IBM 4208 (180 DPI) + \emtex\ibm4208m.dot Parameter file for IBM 4208 (360x180 DPI) * \emtex\v.cmd Call for dviscr * \emtex\v.bat Call for dviscr * \emtex\vs.bat Call for dviscrs * \emtex\prtfx.cmd Call for dvidot fx80 * \emtex\prtfx.bat Call for dvidot fx80 * \emtex\prthplj.cmd Call for dvihplj * \emtex\prthplj.bat Call for dvihplj * \emtex\prtp6l.cmd Call for dvidot p6l * \emtex\prtp6l.bat Call for dvidot p6l * \emtex\prtp6m.cmd Call for dvidot p6m * \emtex\prtp6m.bat Call for dvidot p6m * \emtex\prtp6h.cmd Call for dvidot p6h * \emtex\prtp6h.bat Call for dvidot p6h + \emtex\prtlql.cmd Call for dvidot lql + \emtex\prtlql.bat Call for dvidot lql + \emtex\prtlqm.cmd Call for dvidot lqm + \emtex\prtlqm.bat Call for dvidot lqm + \emtex\prtlqh.cmd Call for dvidot lqh + \emtex\prtlqh.bat Call for dvidot lqh * \emtex\prtitoh.cmd Call for dvidot itoh * \emtex\prtitoh.bat Call for dvidot itoh * \emtex\prtaiw.cmd Call for dvidot aiw * \emtex\prtaiw.bat Call for dvidot aiw * \emtex\mspfx.bat Call for dvimsp.exe (with fx.cnf) * \emtex\mspfx.cmd Call for dvimsp.exe (with fx.cnf) * \emtex\msplj.bat Call for dvimsp.exe (with lj.cnf) * \emtex\msplj.cmd Call for dvimsp.exe (with lj.cnf) \emtex\mspp6l.bat Call for dvimsp.exe (with p6l.cnf) \emtex\mspp6l.cmd Call for dvimsp.exe (with p6l.cnf) \emtex\mspp6m.bat Call for dvimsp.exe (with p6m.cnf) \emtex\mspp6m.cmd Call for dvimsp.exe (with p6m.cnf) \emtex\mspp6h.bat Call for dvimsp.exe (with p6h.cnf) \emtex\mspp6h.cmd Call for dvimsp.exe (with p6h.cnf) * \emtex\mspito.bat Call for dvimsp.exe (with ito.cnf) * \emtex\mspito.cmd Call for dvimsp.exe (with ito.cnf) * \emtex\lj.cnf Configuration file: 300 DPI, LJ * \emtex\p6l.cnf Configuration file: 180 DPI, P6L + \emtex\p6l_p6m.cnf Configuration file: 180 DPI, P6M + \emtex\p6l_p6h.cnf Configuration file: 180 DPI, P6H * \emtex\p6m.cnf Configuration file: 360x180 DPI, P6M * \emtex\p6m_p6h.cnf Configuration file: 360x180 DPI, P6H * \emtex\p6h.cnf Configuration file: 360 DPI, P6H * \emtex\ito.cnf Configuration file: 160x144 DPI, ITO * \emtex\fx.cnf Configuration file: 240x216 DPI, FX + \emtex\oldfonts.sub Font substitution file (use old font libs) + \emtex\newfonts.sub Font substitution file (use new font libs) + \emtex\fontlist Font list (used with fontlib) + \emtex\newfonts.bat Convert font library files to new format + \emtex\newfonts.cmd Convert font library files to new format + \emtex\oldfonts.bat Convert font library files to old format + \emtex\oldfonts.cmd Convert font library files to old format + \emtex\fli_lj.cmd Create font library files LJ_* + \emtex\fli_fx.cmd Create font library files FX_* + \emtex\fli_p6l.cmd Create font library files P6L_* + \emtex\fli_p6m.cmd Create font library files P6M_* + \emtex\fli_p6h.cmd Create font library files P6H_* + \emtex\fli_ito.cmd Create font library files ITO_* + \emtex\ilf_lj.cmd Unpack font library files LJ_* + \emtex\ilf_fx.cmd Unpack font library files FX_* + \emtex\ilf_p6l.cmd Unpack font library files P6L_* + \emtex\ilf_p6m.cmd Unpack font library files P6M_* + \emtex\ilf_p6h.cmd Unpack font library files P6H_* + \emtex\ilf_ito.cmd Unpack font library files ITO_* + \emtex\remove\dvidrv.rem Package contents listing for `remove' DVIDRVMA package ---------------- + \emtex\doc\english\dvidrvma.doc Printing the dvidrv manual (English) + \emtex\doc\english\dvidrv.dvi The dvidrv manual (English) * \emtex\doc\german\dvidrvma.doc Printing the dvidrv manual (German) * \emtex\doc\german\dvidrv.dvi The dvidrv manual (German) \emtex\doc\gr180\dvitrans.0 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.1 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.2 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.3 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.4 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.5 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.6 Graphic file (180 DPI) \emtex\doc\gr180\dvitrans.7 Graphic file (180 DPI) \emtex\doc\gr300\dvitrans.0 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.1 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.2 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.3 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.4 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.5 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.6 Graphic file (300 DPI) \emtex\doc\gr300\dvitrans.7 Graphic file (300 DPI) \emtex\doc\gr360\dvitrans.0 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.1 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.2 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.3 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.4 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.5 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.6 Graphic file (360 DPI) \emtex\doc\gr360\dvitrans.7 Graphic file (360 DPI) + \emtex\remove\dvidrvma.rem Package contents listing for `remove' EMSY package ------------ \emtex\emsyproo.bat Create proof sheet for emsy10 \emtex\emsysmok.bat Create smoke proof for emsy10 \emtex\texinput\emsymb.sty Document style option: emsymb \emtex\texinput\emsymb.tex Macros for plain TeX \emtex\mfinput\emsy.mf em symbol font \emtex\mfinput\emsy10.mf em symbol font 10pt \emtex\mfinput\emsy5.mf em symbol font 5pt \emtex\mfinput\emsy6.mf em symbol font 6pt \emtex\mfinput\emsy7.mf em symbol font 7pt \emtex\mfinput\emsy8.mf em symbol font 8pt \emtex\mfinput\emsy9.mf em symbol font 9pt \emtex\tfm\emsy10.tfm em symbol font 10pt \emtex\tfm\emsy5.tfm em symbol font 5pt \emtex\tfm\emsy6.tfm em symbol font 6pt \emtex\tfm\emsy7.tfm em symbol font 7pt \emtex\tfm\emsy8.tfm em symbol font 8pt \emtex\tfm\emsy9.tfm em symbol font 9pt \emtex\mfjob\emsy.mfj MFjob file for emsy fonts + \emtex\remove\emsy.rem Package contents listing for `remove' GBLATEX package --------------- * \emtex\gblatex.bat Calling LaTeX (German hyphenation) * \emtex\gblatex.cmd Calling LaTeX (German hyphenation) * \emtex\btexfmts\lplaing.fmt fmt file for LaTeX (German hyphenation) * \emtex\btexfmts\lplaing.log log file of lplaing.fmt + \emtex\btexfmts\gslifmt.cmd Create fmt file for SliTeX + \emtex\btexfmts\gslifmt.bat Create fmt file for SliTeX + \emtex\remove\gblatex.rem Package contents listing for `remove' GBTEX package ------------- + \emtex\btexfmts\gfmt.bat Create fmt files + \emtex\btexfmts\gfmt.cmd Create fmt files * \emtex\btexfmts\plaing.fmt plain TeX (German hyphenation) * \emtex\btexfmts\plaing.log log file of plaing.fmt + \emtex\remove\gbtex.rem Package contents listing for `remove' GLATEX package -------------- * \emtex\doc\lkurz.dvi LaTeX brief instructions of H. Partl (German) * \emtex\glatex.bat Call LaTeX (German hyphenation) * \emtex\glatex.cmd Call LaTeX (German hyphenation) * \emtex\texfmts\lplaing.fmt fmt file for LaTeX (German hyphenation) * \emtex\texfmts\lplaing.log log file of lplaing.fmt + \emtex\texfmts\gslifmt.cmd Create fmt file for SliTeX + \emtex\texfmts\gslifmt.bat Create fmt file for SliTeX + \emtex\remove\glatex.rem Package contents listing for `remove' GTEX package ------------ * \emtex\doc\germdoc.dvi Instructions for german.sty * \emtex\gtex.bat Call plain TeX (German hyphenation) * \emtex\gtex.cmd Call plain TeX (German hyphenation) * \emtex\texfmts\plaing.fmt plain TeX (German hyphenation) * \emtex\texfmts\plaing.log log file of plaing.fmt + \emtex\texfmts\gfmt.bat Create fmt files + \emtex\texfmts\gfmt.cmd Create fmt files + \emtex\texinput\ghyphen.min German hyphenations patterns + \emtex\texinput\ghyphen.max German hyphenations patterns (for bigTeX) * \emtex\texinput\german.sty Uniform German TeX commands * \emtex\texinput\germdoc.tex Instructions for german.sty + \emtex\remove\gtex.rem Package contents listing for `remove' LATEX package ------------- * \emtex\doc\latex.bug Bugs in and changes to LaTeX * \emtex\doc\latex.ins Installation instructions (not needed) \emtex\doc\local.gid Ultra brief instructions * \emtex\doc\local.dvi Local guide \emtex\latex.bat Call LaTeX (American hyphenation) \emtex\latex.cmd Call LaTeX (American hyphenation) * \emtex\texfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation) * \emtex\texfmts\lplain.log log file of lplain.fmt + \emtex\texfmts\slifmt.cmd Create fmt file for SliTeX + \emtex\texfmts\slifmt.bat Create fmt file for SliTeX + \emtex\texinput\a4.sty Document style option: A4 page format * \emtex\texinput\addendum.tex Include file for local.tex * \emtex\texinput\art10.sty Document style option: article 10pt * \emtex\texinput\art11.sty Document style option: article 11pt * \emtex\texinput\art12.sty Document style option: article 12pt * \emtex\texinput\article.sty Document style: article * \emtex\texinput\bezier.sty Document style: bezier * \emtex\texinput\bk10.sty Document style option: book 10pt * \emtex\texinput\bk11.sty Document style option: book 11pt * \emtex\texinput\bk12.sty Document style option: book 12pt * \emtex\texinput\book.sty Document style: book * \emtex\texinput\fleqn.sty Document style option: fleqn * \emtex\texinput\idx.tex idx file to print * \emtex\texinput\ifthen.sty Document style option: ifthen * \emtex\texinput\lablst.tex Print contents and cross references * \emtex\texinput\latex.tex LaTeX source file * \emtex\texinput\leqno.sty Document style option: leqno * \emtex\texinput\letter.sty Document style: letter \emtex\texinput\letter.tex Information on letter.sty * \emtex\texinput\lfonts.tex LaTeX source file (font definitions) + \emtex\texinput\lhyphen.ger Load German hyphenation patterns + \emtex\texinput\lhyphen.tex Load English hyphenation patterns * \emtex\texinput\local.tex Local guide * \emtex\texinput\lplain.tex LaTeX source file * \emtex\texinput\makeidx.sty Document style option: makeidx * \emtex\texinput\openbib.sty Document style option: openbib * \emtex\texinput\proc.sty Document style: proc * \emtex\texinput\rep10.sty Document style option: report 10pt * \emtex\texinput\rep11.sty Document style option: report 11pt * \emtex\texinput\rep12.sty Document style option: report 12pt * \emtex\texinput\report.sty Document style: report * \emtex\texinput\sample.tex Example text * \emtex\texinput\sfonts.tex SliTeX source file (font definitions) * \emtex\texinput\showidx.sty Document style option: showidx * \emtex\texinput\slides.sty Document style: slide * \emtex\texinput\slitex.tex SliTeX source file * \emtex\texinput\small.tex Example text * \emtex\texinput\splain.tex SliTeX source file \emtex\texinput\suthesis.sty Doc. style option: Stanford Univ. PhD thesis + \emtex\texinput\testa4.tex Test page (for margins) * \emtex\texinput\testpage.tex Test page (for margins) * \emtex\texinput\titlepag.sty Document style option: titlepage \emtex\texinput\tryfonts.tex Try text fonts * \emtex\texinput\twocolum.sty Document style option: twocolumn + \emtex\tfm\lcircle1.tfm LaTeX circle font (thin) + \emtex\tfm\lcirclew.tfm LaTeX circle font (wide) \emtex\tfm\lasy10.tfm LaTeX symbols 10pt \emtex\tfm\lasy5.tfm LaTeX symbols 5pt \emtex\tfm\lasy6.tfm LaTeX symbols 6pt \emtex\tfm\lasy7.tfm LaTeX symbols 7pt \emtex\tfm\lasy8.tfm LaTeX symbols 8pt \emtex\tfm\lasy9.tfm LaTeX symbols 9pt \emtex\tfm\lasyb10.tfm Bold LaTeX symbols 9pt \emtex\tfm\lcmss8.tfm SliTeX sans serif 8pt \emtex\tfm\lcmssb8.tfm SliTeX sans serif Bold 8pt \emtex\tfm\lcmssi8.tfm SliTeX sans slanted 8pt \emtex\tfm\line10.tfm LaTeX line font (small) \emtex\tfm\linew10.tfm LaTeX line font (wide) + \emtex\tfm\icmcsc10.tfm Invisible cmcsc10 \emtex\tfm\icmex10.tfm Invisible cmex10 \emtex\tfm\icmmi8.tfm Invisible cmmi8 \emtex\tfm\icmsy8.tfm Invisible cmsy8 \emtex\tfm\icmtt8.tfm Invisible cmtt8 \emtex\tfm\ilasy8.tfm Invisible lasy8 \emtex\tfm\ilcmss8.tfm Invisible lcmss8 \emtex\tfm\ilcmssb8.tfm Invisible lcmssb8 \emtex\tfm\ilcmssi8.tfm Invisible lcmssi8 + \emtex\remove\latex.rem Package contents listing for `remove' LATEXDOC package ---------------- * \emtex\texinput\art10.doc Document style option: article 10pt * \emtex\texinput\art11.doc Document style option: article 11pt * \emtex\texinput\art12.doc Document style option: article 12pt * \emtex\texinput\article.doc Document style: article * \emtex\texinput\bezier.doc Document style: bezier * \emtex\texinput\bk10.doc Document style option: book 10pt * \emtex\texinput\bk11.doc Document style option: book 11pt * \emtex\texinput\bk12.doc Document style option: book 12pt * \emtex\texinput\book.doc Document style: book * \emtex\texinput\fleqn.doc Document style option: fleqn * \emtex\texinput\ifthen.doc Document style option: ifthen * \emtex\texinput\leqno.doc Document style option: leqno * \emtex\texinput\letter.doc Document style: letter * \emtex\texinput\makeidx.doc Document style option: makeidx * \emtex\texinput\openbib.doc Document style option: openbib * \emtex\texinput\proc.doc Document style: proc * \emtex\texinput\rep10.doc Document style option: report 10pt * \emtex\texinput\rep11.doc Document style option: report 11pt * \emtex\texinput\rep12.doc Document style option: report 12pt * \emtex\texinput\report.doc Document style: report * \emtex\texinput\showidx.doc Document style option: showidx * \emtex\texinput\slides.doc Document style: slide \emtex\texinput\suthesis.doc Doc. style option: Stanford Univ. PhD thesis * \emtex\texinput\titlepag.doc Document style option: titlepage * \emtex\texinput\twocolum.doc Document style option: twocolumn + \emtex\remove\latexdoc.rem Package contents listing for `remove' LKURZ package ------------- * \emtex\texinput\lkurz.tex LaTeX brief instructions (German) * \emtex\texinput\lksym.tex LaTeX brief instructions (include file) * \emtex\texinput\lk1.tex LaTeX brief instructions (include file) * \emtex\texinput\lk2.tex LaTeX brief instructions (include file) * \emtex\texinput\lk3.tex LaTeX brief instructions (include file) * \emtex\texinput\lk4.tex LaTeX brief instructions (include file) + \emtex\remove\lkurz.rem Package contents listing for `remove' MAKEINDX package ---------------- * \emtex\makeindx.exe MakeIndex program * \emtex\doc\makeindx.cpy Distribution notice for MakeIndex + \emtex\doc\makeindx.doc Detailed instructions for MakeIndex * \emtex\texinput\makeindx.tex Instructions for MakeIndex + \emtex\remove\makeindx.rem Package contents listing for `remove' MF package ---------- + \emtex\doc\english\mfware.doc Instructions for METAFONT etc. (English) * \emtex\doc\german\mfware.doc Instructions for METAFONT etc. (German) * \emtex\doc\cm85.bug Mistakes list for CM fonts * \emtex\mf.exe METAFONT (DOS, OS/2 real mode) * \emtex\mf286.exe METAFONT (DOS, OS/2 real mode, 80286 CPU) * \emtex\mfp.exe METAFONT (OS/2 protected mode) + \emtex\mfpm.ovl Graphic output for mfp.exe (overlay) \emtex\mfbases\bas.bat Create bas files \emtex\mfbases\bas.cmd Create bas files * \emtex\mfbases\cm.bas Computer Modern METAFONT base * \emtex\mfbases\cm.log Log file for cm.bas \emtex\mfbases\mf.poo Pool file (string list) for INIMF * \emtex\mfbases\plain.bas Plain METAFONT base * \emtex\mfbases\plain.log Log file for plain.bas \emtex\mfinput\3test.mf Font tests \emtex\mfinput\5test.mf Font tests \emtex\mfinput\6test.mf Font tests \emtex\mfinput\accent.mf Accents for roman/italic fonts \emtex\mfinput\bigacc.mf Big accents for cmex# \emtex\mfinput\bigdel.mf Big delimiter for cmex# \emtex\mfinput\bigop.mf Big operators for cmex# \emtex\mfinput\btest.mf Font tests \emtex\mfinput\calu.mf Calligraphic capitals + \emtex\mfinput\lcircle.mf LaTeX circles and arcs + \emtex\mfinput\lcircle1.mf LaTeX circles and arcs (small) + \emtex\mfinput\lcirclew.mf LaTeX circles and arcs (wide) \emtex\mfinput\cm.ini Create CM base \emtex\mfinput\cmb10.mf CM Bold Roman 10pt \emtex\mfinput\cmbase.mf CM Base \emtex\mfinput\cmbsy10.mf CM Bold Math Symbols 10pt \emtex\mfinput\cmbx10.mf CM Bold Extended Roman 10pt \emtex\mfinput\cmbx12.mf CM Bold Extended Roman 12pt \emtex\mfinput\cmbx5.mf CM Bold Extended Roman 5pt \emtex\mfinput\cmbx6.mf CM Bold Extended Roman 6pt \emtex\mfinput\cmbx7.mf CM Bold Extended Roman 7pt \emtex\mfinput\cmbx8.mf CM Bold Extended Roman 8pt \emtex\mfinput\cmbx9.mf CM Bold Extended Roman 9pt \emtex\mfinput\cmbxsl10.mf CM Bold Extended Slanted Roman 10pt \emtex\mfinput\cmbxti10.mf CM Bold Extended Text Italic 10pt \emtex\mfinput\cmcsc10.mf CM Roman Caps and Small Caps 10pt \emtex\mfinput\cmdunh10.mf CM Dunhill Roman 10pt \emtex\mfinput\cmex10.mf CM Math Extension 10pt \emtex\mfinput\cmex9.mf CM Math Extension 9pt \emtex\mfinput\cmff10.mf CM Funny Roman 10pt \emtex\mfinput\cmfi10.mf CM Funny Italic 10pt \emtex\mfinput\cmfib8.mf CM Roman Fibonacci Font 10pt \emtex\mfinput\cminch.mf CM Inch-High Sans Serif Bold Ext. Caps & Dig \emtex\mfinput\cmitt10.mf CM Italic Typewriter Text (10pt) \emtex\mfinput\cmmi10.mf CM Math Italic 10pt \emtex\mfinput\cmmi12.mf CM Math Italic 12pt \emtex\mfinput\cmmi5.mf CM Math Italic 5pt \emtex\mfinput\cmmi6.mf CM Math Italic 6pt \emtex\mfinput\cmmi7.mf CM Math Italic 7pt \emtex\mfinput\cmmi8.mf CM Math Italic 8pt \emtex\mfinput\cmmi9.mf CM Math Italic 9pt \emtex\mfinput\cmmib10.mf CM Math Italic Bold 10pt \emtex\mfinput\cmr10.mf CM Roman 10pt \emtex\mfinput\cmr12.mf CM Roman 12pt \emtex\mfinput\cmr17.mf CM Roman 17pt \emtex\mfinput\cmr5.mf CM Roman 5pt \emtex\mfinput\cmr6.mf CM Roman 6pt \emtex\mfinput\cmr7.mf CM Roman 7pt \emtex\mfinput\cmr8.mf CM Roman 8pt \emtex\mfinput\cmr9.mf CM Roman 9pt \emtex\mfinput\cmsl10.mf CM Slanted Roman 10pt \emtex\mfinput\cmsl12.mf CM Slanted Roman 12pt \emtex\mfinput\cmsl8.mf CM Slanted Roman 8pt \emtex\mfinput\cmsl9.mf CM Slanted Roman 9pt \emtex\mfinput\cmsltt10.mf CM Slanted Typewriter Text (10pt) \emtex\mfinput\cmss10.mf CM Sans Serif 10pt \emtex\mfinput\cmss12.mf CM Sans Serif 12pt \emtex\mfinput\cmss17.mf CM Sans Serif 17pt \emtex\mfinput\cmss8.mf CM Sans Serif 8pt \emtex\mfinput\cmss9.mf CM Sans Serif 9pt \emtex\mfinput\cmssbx10.mf CM Sans Serif Bold Extended 10pt \emtex\mfinput\cmssdc10.mf CM Sans Serif Demibold Condensed 10pt \emtex\mfinput\cmssi10.mf CM Slanted Sans Serif 10pt \emtex\mfinput\cmssi12.mf CM Slanted Sans Serif 12pt \emtex\mfinput\cmssi17.mf CM Slanted Sans Serif 17pt \emtex\mfinput\cmssi8.mf CM Slanted Sans Serif 8pt \emtex\mfinput\cmssi9.mf CM Slanted Sans Serif 9pt \emtex\mfinput\cmssq8.mf CM Sans Serif Quotation Style 8pt \emtex\mfinput\cmssqi8.mf CM Sans Serif Quotation Style Slanted 8pt \emtex\mfinput\cmsy10.mf CM Math Symbols 10pt \emtex\mfinput\cmsy5.mf CM Math Symbols 5pt \emtex\mfinput\cmsy6.mf CM Math Symbols 6pt \emtex\mfinput\cmsy7.mf CM Math Symbols 7pt \emtex\mfinput\cmsy8.mf CM Math Symbols 8pt \emtex\mfinput\cmsy9.mf CM Math Symbols 9pt \emtex\mfinput\cmtcsc10.mf CM Typewriter Caps and Small Caps (10pt) \emtex\mfinput\cmtex10.mf CM TeX Extended ASCII characters (10pt) \emtex\mfinput\cmtex8.mf CM TeX Extended ASCII characters (8pt) \emtex\mfinput\cmtex9.mf CM TeX Extended ASCII characters (9pt) \emtex\mfinput\cmti10.mf CM Text Italic 10pt \emtex\mfinput\cmti12.mf CM Text Italic 12pt \emtex\mfinput\cmti7.mf CM Text Italic 7pt \emtex\mfinput\cmti8.mf CM Text Italic 8pt \emtex\mfinput\cmti9.mf CM Text Italic 9pt \emtex\mfinput\cmtt10.mf CM Typewriter Text (10pt) \emtex\mfinput\cmtt12.mf CM Typewriter Text (12pt) \emtex\mfinput\cmtt8.mf CM Typewriter Text (8pt) \emtex\mfinput\cmtt9.mf CM Typewriter Text (9pt) \emtex\mfinput\cmu10.mf CM Unslanted Italic 10pt \emtex\mfinput\cmvtt10.mf CM Variable-Width Typewriter Text (10pt) \emtex\mfinput\comlig.mf Ligatures for roman/italic fonts \emtex\mfinput\csc.mf Caps and small Ccaps \emtex\mfinput\cscspu.mf `I', `J', `ss' for caps and small caps \emtex\mfinput\ctest.mf Font tests \emtex\mfinput\ega.mf Changes for EGA \emtex\mfinput\expr.mf Examples from the METAFONTbook \emtex\mfinput\ftest.mf Font tests \emtex\mfinput\grayf.mf Create gray font \emtex\mfinput\greekl.mf Small Greek letters \emtex\mfinput\greeku.mf Large Greek letters \emtex\mfinput\halftone.mf Create halftone font \emtex\mfinput\icmex10.mf CM Math Extension 10pt invisible \emtex\mfinput\icmmi8.mf CM Math Italic 10pt invisible \emtex\mfinput\icmsy8.mf CM Math Symbols 10pt invisible \emtex\mfinput\icmtt8.mf CM Typewriter Text 10pt invisible \emtex\mfinput\ilasy8.mf LaTeX Symbols 8pt invisible \emtex\mfinput\ilcmss8.mf SliTeX Sans Serif 8pt invisble \emtex\mfinput\ilcmssb8.mf SliTeX Sans Serif Bold 8pt invisble \emtex\mfinput\ilcmssi8.mf SliTeX Sans Serif Slanted 8pt invisble \emtex\mfinput\io.mf Examples from the METAFONTbook \emtex\mfinput\itald.mf CM Italic (digits) \emtex\mfinput\italig.mf CM Italic (f-Ligatures) \emtex\mfinput\itall.mf CM Italic (small letters) \emtex\mfinput\italms.mf CM Math Italic (various symbols) \emtex\mfinput\italp.mf CM Italic (`$', `&', `?') \emtex\mfinput\italsp.mf CM Italic (Special symbols) \emtex\mfinput\itest.mf Font tests \emtex\mfinput\lasy.mf LaTeX Symbols \emtex\mfinput\lasy10.mf LaTeX Symbols 10pt \emtex\mfinput\lasy5.mf LaTeX Symbols 5pt \emtex\mfinput\lasy6.mf LaTeX Symbols 6pt \emtex\mfinput\lasy7.mf LaTeX Symbols 7pt \emtex\mfinput\lasy8.mf LaTeX Symbols 8pt \emtex\mfinput\lasy9.mf LaTeX Symbols 9pt \emtex\mfinput\lasyb10.mf Bold LaTeX Symbols 9pt \emtex\mfinput\lcmss8.mf SliTeX Sans Serif 8pt \emtex\mfinput\lcmssb8.mf SliTeX Sans Serif Bold 8pt \emtex\mfinput\lcmssi8.mf SliTeX Sans Slanted 8pt \emtex\mfinput\line.mf LaTeX line segments \emtex\mfinput\line10.mf LaTeX line segments (small) \emtex\mfinput\linew10.mf LaTeX line segments (wide) * \emtex\mfinput\local.mf Local changes for plain/cm * \emtex\mfinput\logo.mf METAFONT logo \emtex\mfinput\logo10.mf METAFONT logo 10pt \emtex\mfinput\logo8.mf METAFONT logo 8pt \emtex\mfinput\logo9.mf METAFONT logo 9pt \emtex\mfinput\logobf10.mf Boldface METAFONT logo 10pt \emtex\mfinput\logosl10.mf Slanted METAFONT logo 10pt \emtex\mfinput\mathex.mf CM Math Extension \emtex\mfinput\mathit.mf CM Math Italic \emtex\mfinput\mathsy.mf CM Symbols \emtex\mfinput\mtest.mf Font tests \emtex\mfinput\olddig.mf Digits in old style \emtex\mfinput\plain.ini Create plain base * \emtex\mfinput\plain.mf plain base \emtex\mfinput\punct.mf Punctuation Marks for roman/italic fonts \emtex\mfinput\qtest.mf Font tests \emtex\mfinput\roman.mf CM Roman \emtex\mfinput\romand.mf CM Roman (digits) * \emtex\mfinput\romanl.mf CM Roman (small letters) \emtex\mfinput\romanp.mf CM Roman (`$', `&', `?') \emtex\mfinput\romanu.mf CM Roman (large letters) \emtex\mfinput\romlig.mf CM Roman (ligatures) \emtex\mfinput\romms.mf CM Math Italic (vertical symbols) \emtex\mfinput\romspl.mf CM Roman (special symbols) \emtex\mfinput\romspu.mf CM Roman (special symbols) \emtex\mfinput\romsub.mf CM Roman (special symbols) \emtex\mfinput\rtest.mf Font tests \emtex\mfinput\slant.mf Create slant font \emtex\mfinput\sroman.mf SliTeX Roman \emtex\mfinput\sromanu.mf SliTeX Roman (large letters) \emtex\mfinput\stest.mf Font tests \emtex\mfinput\sym.mf Symbols * \emtex\mfinput\symbol.mf Symbols for Mathematical fonts \emtex\mfinput\texset.mf CM TeX extended ASCII characters \emtex\mfinput\textit.mf CM Text italic \emtex\mfinput\title.mf Large letters and digits (for cminch) \emtex\mfinput\tset.mf Special symbols for cmtex#-fonts \emtex\mfinput\tsetsl.mf Special symbols for cmtex#-fonts \emtex\mfinput\ttest.mf Font tests \emtex\mfinput\waits.mf local.mf as used at WAITS \emtex\mfinput\xtest.mf Font tests \emtex\mfinput\ztest.mf Font tests * \emtex\texinput\testfont.tex Test text for a font + \emtex\remove\mf.rem Package contents listing for `remove' MFWARE package -------------- + \emtex\doc\english\mfjob.doc Instructions for MFjob (English) * \emtex\doc\german\mfjob.doc Instructions for MFjob (German) * \emtex\chtopx.exe Conversion program .chr -> .pxl * \emtex\gftodvi.exe Create METAFONT proof sheets * \emtex\gftopk.exe Conversion program .#gf -> .pk * \emtex\gftopxl.exe Conversion program .#gf -> .pxl * \emtex\gftype.exe List .#gf-files * \emtex\mft.exe Format METAFONT source text * \emtex\pktogf.exe Conversion program .pk -> .gf * \emtex\pktopx.exe Conversion program .pk -> .pxl * \emtex\pktype.exe List .pk files * \emtex\pxtoch.exe Conversion program .pxl -> .chr * \emtex\pxtopk.exe Conversion program .pxl -> .pk * \emtex\mfjob.exe MFjob program * \emtex\mfjob1.ovl MFjob program (overlay) * \emtex\mfjob2.ovl MFjob program (overlay) * \emtex\mfjob\all.mfj MFjob file: standard fonts * \emtex\mfjob\latex.mfj MFjob file: cmcsc10 for LaTeX * \emtex\mfjob\modes.mfj MFjob file: Include file for *.mfj * \emtex\mfjob\gftodvi.mfj MFjob file: black, gray, and slant fonts + \emtex\mfjob\slitex.mfj MFjob file: SliTeX fonts + \emtex\mfjob\texbook.mfj MFjob file: Fonts for The TeXbook + \emtex\mfjob\amsfonts.mfj MFjob file: AMSFonts 2.0 (complete). + \emtex\mfjob\cyrillic.mfj MFjob file: AMSFonts 2.0 (Cyrillic). + \emtex\mfjob\euler.mfj MFjob file: AMSFonts 2.0 (Euler fonts). + \emtex\mfjob\extracm.mfj MFjob file: AMSFonts 2.0 (extracm). + \emtex\mfjob\symbols.mfj MFjob file: AMSFonts 2.0 (symbol fonts). \emtex\mfinput\cmbase.mft MFT style file for cm METAFONT base \emtex\mfinput\e.mft MFT style file `Computer Modern Typefaces' \emtex\mfinput\plain.mft MFT style file for plain METAFONT base \emtex\mfinput\graylj.mf Gray font for HP LaserJet+ \emtex\mfinput\grayfx.mf Gray font for EPSON FX-80 \emtex\mfinput\blacklj.mf Black font for HP LaserJet+ \emtex\mfinput\blackfx.mf Black font for EPSON FX-80 \emtex\mfinput\slantlj.mf Slant font for HP LaserJet+ \emtex\mfinput\slantfx.mf Slant font for EPSON FX-80 * \emtex\texinput\mftmac.tex Macros for TeX and MFT \emtex\tfm\graylj.tfm Gray font for HP LaserJet+ \emtex\tfm\grayfx.tfm Gray font for EPSON FX-80 \emtex\tfm\blacklj.tfm Black font for HP LaserJet+ \emtex\tfm\blackfx.tfm Black font for EPSON FX-80 \emtex\tfm\slantlj.tfm Slant font for HP LaserJet+ \emtex\tfm\slantfx.tfm Slant font for EPSON FX-80 + \emtex\remove\mfware.rem Package contents listing for `remove' MISC_MF package --------------- * \emtex\mfinput\cmman.mf Variants of CM for the TeX/METAFONT manuals \emtex\mfinput\life.mf Examples from the METAFONTbook * \emtex\mfinput\manfnt.mf Special font for the TeX/METAFONT manuals \emtex\mfinput\mfman.mf Most of the figures for The METAFONTbook + \emtex\remove\misc_mf.rem Package contents listing for `remove' PICTEX package -------------- * \emtex\texinput\latexpic.tex LaTeX objects for PiCTeX under plain TeX \emtex\texinput\pictex.tex Main PiCTeX file \emtex\texinput\postpict.tex PiCTeX under LaTeX \emtex\texinput\prepicte.tex PiCTeX under LaTeX + \emtex\remove\pictex.rem Package contents listing for `remove' PKEDIT package -------------- + \emtex\doc\english\pkedit.doc Instructions for pkedit (English) * \emtex\doc\german\pkedit.doc Instructions for pkedit (German) * \emtex\pkedit.exe pkedit program + \emtex\remove\pkedit.rem Package contents listing for `remove' TEX package ----------- + \emtex\doc\english\texware.doc Brief instructions for TeX etc. (English) * \emtex\doc\german\texware.doc Brief instructions for TeX etc. (German) + \emtex\doc\english\emtex.dvi Instructions for emTeX (English) * \emtex\doc\german\emtex.dvi Instructions for emTeX (German) * \emtex\tex.exe TeX (DOS, OS/2 real mode) * \emtex\tex286.exe TeX (DOS, OS/2 real mode, 80286 CPU) * \emtex\texp.exe TeX (OS/2 protected mode) * \emtex\set-tex.bat Set environment variables * \emtex\set-tex.cmd Set environment variables * \emtex\texfmts\fmt.bat Create fmt files * \emtex\texfmts\fmt.cmd Create fmt files * \emtex\texfmts\plain.fmt plain TeX (American hyphenation) * \emtex\texfmts\plain.log log file of plain.fmt * \emtex\texfmts\tex.poo Pool file (string list) for INITeX + \emtex\texinput\850_tex.tcp Convert code page 850 to TeX commands * \emtex\texinput\hyphen.tex American hyphenation patterns \emtex\texinput\fntbl.tex Typeset a font table * \emtex\texinput\plain.tex plain TeX + \emtex\texinput\3.tex Use old formats with TeX 3.0 \emtex\tfm\cmb10.tfm CM Bold Roman 10pt \emtex\tfm\cmbsy10.tfm CM Bold Math Symbols 10pt \emtex\tfm\cmbx10.tfm CM Bold Extended Roman 10pt \emtex\tfm\cmbx12.tfm CM Bold Extended Roman 12pt \emtex\tfm\cmbx5.tfm CM Bold Extended Roman 5pt \emtex\tfm\cmbx6.tfm CM Bold Extended Roman 6pt \emtex\tfm\cmbx7.tfm CM Bold Extended Roman 7pt \emtex\tfm\cmbx8.tfm CM Bold Extended Roman 8pt \emtex\tfm\cmbx9.tfm CM Bold Extended Roman 9pt \emtex\tfm\cmbxsl10.tfm CM Bold Extended Slanted Roman 10pt \emtex\tfm\cmbxti10.tfm CM Bold Extended Text Italic 10pt \emtex\tfm\cmcsc10.tfm CM Roman Caps and Small Caps 10pt \emtex\tfm\cmdunh10.tfm CM Dunhill Roman 10pt \emtex\tfm\cmex10.tfm CM Math Extension 10pt \emtex\tfm\cmex9.tfm CM Math Extension 9pt \emtex\tfm\cmff10.tfm CM Funny Roman 10pt \emtex\tfm\cmfi10.tfm CM Funny Italic 10pt \emtex\tfm\cmfib8.tfm CM Roman Fibonacci Font 10pt \emtex\tfm\cminch.tfm CM Inch-High Sans Serif Bold Ext. Caps & Dig \emtex\tfm\cmitt10.tfm CM Italic Typewriter Text (10pt) \emtex\tfm\cmmi10.tfm CM Math Italic 10pt \emtex\tfm\cmmi12.tfm CM Math Italic 12pt \emtex\tfm\cmmi5.tfm CM Math Italic 5pt \emtex\tfm\cmmi6.tfm CM Math Italic 6pt \emtex\tfm\cmmi7.tfm CM Math Italic 7pt \emtex\tfm\cmmi8.tfm CM Math Italic 8pt \emtex\tfm\cmmi9.tfm CM Math Italic 9pt \emtex\tfm\cmmib10.tfm CM Math Italic Bold 10pt \emtex\tfm\cmr10.tfm CM Roman 10pt \emtex\tfm\cmr12.tfm CM Roman 12pt \emtex\tfm\cmr17.tfm CM Roman 17pt \emtex\tfm\cmr5.tfm CM Roman 5pt \emtex\tfm\cmr6.tfm CM Roman 6pt \emtex\tfm\cmr7.tfm CM Roman 7pt \emtex\tfm\cmr8.tfm CM Roman 8pt \emtex\tfm\cmr9.tfm CM Roman 9pt \emtex\tfm\cmsl10.tfm CM Slanted Roman 10pt \emtex\tfm\cmsl12.tfm CM Slanted Roman 12pt \emtex\tfm\cmsl8.tfm CM Slanted Roman 8pt \emtex\tfm\cmsl9.tfm CM Slanted Roman 9pt \emtex\tfm\cmsltt10.tfm CM Slanted Typewriter Text (10pt) \emtex\tfm\cmss10.tfm CM Sans Serif 10pt \emtex\tfm\cmss12.tfm CM Sans Serif 12pt \emtex\tfm\cmss17.tfm CM Sans Serif 17pt \emtex\tfm\cmss8.tfm CM Sans Serif 8pt \emtex\tfm\cmss9.tfm CM Sans Serif 9pt \emtex\tfm\cmssbx10.tfm CM Sans Serif Bold Extended 10pt \emtex\tfm\cmssdc10.tfm CM Sans Serif Demibold Condensed 10pt \emtex\tfm\cmssi10.tfm CM Slanted Sans Serif 10pt \emtex\tfm\cmssi12.tfm CM Slanted Sans Serif 12pt \emtex\tfm\cmssi17.tfm CM Slanted Sans Serif 17pt \emtex\tfm\cmssi8.tfm CM Slanted Sans Serif 8pt \emtex\tfm\cmssi9.tfm CM Slanted Sans Serif 9pt \emtex\tfm\cmssq8.tfm CM Sans Serif Quotation Style 8pt \emtex\tfm\cmssqi8.tfm CM Sans Serif Quotation Style Slanted 8pt \emtex\tfm\cmsy10.tfm CM Math Symbols 10pt \emtex\tfm\cmsy5.tfm CM Math Symbols 5pt \emtex\tfm\cmsy6.tfm CM Math Symbols 6pt \emtex\tfm\cmsy7.tfm CM Math Symbols 7pt \emtex\tfm\cmsy8.tfm CM Math Symbols 8pt \emtex\tfm\cmsy9.tfm CM Math Symbols 9pt \emtex\tfm\cmtcsc10.tfm CM Typewriter Caps and Small Caps (10pt) \emtex\tfm\cmtex10.tfm CM TeX Extended ASCII characters (10pt) \emtex\tfm\cmtex8.tfm CM TeX Extended ASCII characters (8pt) \emtex\tfm\cmtex9.tfm CM TeX Extended ASCII characters (9pt) \emtex\tfm\cmti10.tfm CM Text Italic 10pt \emtex\tfm\cmti12.tfm CM Text Italic 12pt \emtex\tfm\cmti7.tfm CM Text Italic 7pt \emtex\tfm\cmti8.tfm CM Text Italic 8pt \emtex\tfm\cmti9.tfm CM Text Italic 9pt \emtex\tfm\cmtt10.tfm CM Typewriter Text (10pt) \emtex\tfm\cmtt12.tfm CM Typewriter Text (12pt) \emtex\tfm\cmtt8.tfm CM Typewriter Text (8pt) \emtex\tfm\cmtt9.tfm CM Typewriter Text (9pt) \emtex\tfm\cmu10.tfm CM Unslanted Italic 10pt \emtex\tfm\cmvtt10.tfm CM Variable-Width Typewriter Text (10pt) \emtex\tfm\dummy.tfm Empty font \emtex\tfm\logo10.tfm METAFONT logo 10pt \emtex\tfm\logo8.tfm METAFONT logo 8pt \emtex\tfm\logo9.tfm METAFONT logo 9pt \emtex\tfm\logobf10.tfm Boldface METAFONT logo 10pt \emtex\tfm\logosl10.tfm Slanted METAFONT logo 10pt * \emtex\tfm\cmman.tfm Variants of CM for the TeX/METAFONT manuals * \emtex\tfm\manfnt.tfm Special font for the TeX/METAFONT manuals + \emtex\remove\tex.rem Package contents listing for `remove' TEXCAD package -------------- * \emtex\texcad.exe The TeXcad program * \emtex\gh.bat Calling editor, LaTeX, TeXcad, and Previewer \emtex\ask.exe Auxiliary program for gh.bat \emtex\texcad.opt TeXcad parameters \emtex\att.bgi Video graphics driver \emtex\cga.bgi Video graphics driver \emtex\herc.bgi Video graphics driver \emtex\egavga.bgi Video graphics driver \emtex\ibm8514.bgi Video graphics driver \emtex\pc3270.bgi Video graphics driver + \emtex\doc\english\tcman.dvi TeXcad manual (English) * \emtex\doc\german\tcman.dvi TeXcad manual (German) + \emtex\doc\english\texcad.ver Changes from older versions (English). + \emtex\doc\german\texcad.ver Changes from older versions (German). \emtex\texinput\emlines.sty Doc. Style Opt.: lines with arbitrary slopes * \emtex\texinput\emlines2.sty Ditto, cf. tcman.dvi * \emtex\texinput\gh.tex Testing LaTeX documents and pictures + \emtex\remove\texcad.rem Package contents listing for `remove' TEXWARE package --------------- + \emtex\doc\english\texchk.doc Instructions for texchk (English) * \emtex\doc\german\texchk.doc Instructions for texchk (German) * \emtex\texchk.exe Syntax checker for LaTeX * \emtex\texconv.exe Text conversion (ae -> \"a etc.) + \emtex\maketcp.exe Create tcp files * \emtex\dvitype.exe List a dvi file * \emtex\pltotf.exe Conversion program .pl -> .tfm * \emtex\tftopl.exe Conversion program .tfm -> .pl + \emtex\vftovp.exe Conversion program .vf & .tfm -> .vpl + \emtex\vptovf.exe Conversion program .vpl -> .vf & .tfm + \emtex\remove\texware.rem Package contents listing for `remove' WEB package ----------- * \emtex\doc\web.doc Brief instructions for the WEB programs * \emtex\weave.exe WEAVE (.web -> .tex) * \emtex\tangle.exe TANGLE (.web -> .pas) * \emtex\pooltype.exe List a pool file * \emtex\texinput\webmac.tex Macros for TeX and WEAVE * \emtex\texinput\webman.tex Manual for the WEB system. + \emtex\remove\web.rem Package contents listing for `remove' Fonts ----- See the section `Further diskettes' for a listing of the devices for which fonts can be generated. The fonts will be generated in the following magnifications: \magstep0 (scaled 1000) \magstephalf (scaled 1095) \magstep1 (scaled 1200) \magstep2 (scaled 1440) \magstep3 (scaled 1728) \magstep4 (scaled 2074) \magstep5 (scaled 2488) In each magnification there are the following fonts: cmr5 cmr6 cmr7 cmr8 cmr9 cmr10 cmr12 cmr17 cmbx5 cmbx6 cmbx7 cmbx8 cmbx9 cmbx10 cmbx12 cmmi5 cmmi6 cmmi7 cmmi8 cmmi9 cmmi10 cmmi12 cmsy5 cmsy6 cmsy7 cmsy8 cmsy9 cmsy10 lasy5 lasy6 lasy7 lasy8 lasy9 lasy10 emsy5 emsy6 emsy7 emsy8 emsy9 emsy10 cmti7 cmti8 cmti9 cmti10 cmti12 cmss8 cmss9 cmss10 cmss12 cmss17 cmssi8 cmssi9 cmssi10 cmssi12 cmssi17 cmsl8 cmsl9 cmsl10 cmsl12 cmtt8 cmtt9 cmtt10 (cmtt12) cmtex8 cmtex9 cmtex10 logo8 logo9 logo10 cmex9 cmex10 cmcsc10 cmtcsc10 lasyb10 logobf10 logosl10 cmdunh10 cmssq8 cmssqi8 cmssbx10 cmssdc10 cmbxti10 cmbxsl10 cmitt10 cmsltt10 cmvtt10 cmmib10 cmbsy10 cmb10 cmfi10 cmff10 cmu10 cmfib8 cminch lcmss8 lcmssb8 lcmssi8 line10 linew10 lcircle1 (=lcircle10) lcirclew (=lcirclew10) In each `magnification' scaled 800 and scaled 900 one has the font: cmcsc10 Big fonts for SliTeX are packaged in a separate font library file (lj_sli.fli, for example): "\magstep6" (scaled 2986) "\magstep7" (scaled 3583) "\magstep8" (scaled 4300) lcmss8 lcmssi8 lcmssb8 cmmi8 cmsy8 cmtt8 lasy8 "\magstep9" (scaled 5160) lcmss8 The font cmtt12 is missing for some devices in some magnifications (this is taken into account in lfonts.tex). You don't need separate fonts for the screen previewers, as you can use the printer fonts. ------------------------------------------------------------------------------ License ------------------------------------------------------------------------------ emTeX may only be distributed in UNCHANGED and COMPLETE form (all zip files, readme.eng and readme.ger!), and only when this is done WITHOUT CHARGE. If you want to distribute only parts of emTeX or if you want to charge a small fee for handling etc., you have to contact the author. Please observe the license conditions for pkzip/pkunzip (see manual.doc in pkz102.exe)! Please observe the directions in \emtex\texinput\ghyphen.min and \emtex\texinput\ghyphen.max! Please observe the directions in \emtex\doc\makeindx.cpy (see also \emtex\doc\english\texware.doc and \emtex\doc\german\texware.doc)! TeXcad is Shareware. Please observe the directions in \emtex\doc\english\tcman.dvi! No guarantee is made as to the proper functioning of the programs. No liability will be admitted for damage resulting from using the programs. Instead of a list: All the trademarks used in this document and all the other emTeX documents are registered to whoever it is that owns them. ------------------------------------------------------------------------------ How do I get emTeX? ------------------------------------------------------------------------------ - You can get emTeX at some University computing centers. - Ask your friends, etc. - Ask your local TeX users group. - Anonymous ftp: ftp.uni-stuttgart.de [129.69.1.12] soft/tex/machines/pc/emtex ymir.claremont.edu [134.173.4.23] [anonymous.tex.ibm_pc.emtex] archive.cs.ruu.nl [131.211.80.5] TEX/emtex utsun.s.u-tokyo.ac.jp [133.11.11.11] TeX/emtex ponder.csci.unt.edu [129.120.3.16] pub/TeX/EmTeX - Mail server: mail-server@cs.ruu.nl mail-server@rusinfo.rus.uni-stuttgart texserver@uk.ac.tex (UK) texserver@tex.ac.uk (outside UK) - Ask the one from whom you got this text. As this text is distributed by the author only with the complete emTeX, you should be able to trace back this text to a complete emTeX. - If there is no other way to get emTeX (which is impossible, as proved above), you can try to send formatted diskettes in sufficient number (5.25 inch, 1200 KB, high density or 3.5 inch, 1440 KB, high density; see above; include a spare diskette), return postage, and a suitable self-addressed package, to the author (see below). Also indicate the fonts desired (i.e. printer type and resolution). You can save the author from unpleasant work by using MFjob (which comes with emTeX) for generating fonts. Shipping at your risk. You also run the risk of having your address given to (a few) other people in your vicinity who want a copy of emTeX. ------------------------------------------------------------------------------ The author ------------------------------------------------------------------------------ Address: Eberhard Mattes Teckstrasse 81 (Teckstra\ss e) D-7141 Moeglingen (M\"oglingen) Federal Republic of Germany Questions only by mail! No telephone calls please! Please inclose a self-addressed return package with postage if you expect a response. Read help.eng first! Electronic mail (subject to sudden change): Internet: mattes@azu.informatik.uni-stuttgart.de If you want support by telephone, obtain a commercial TeX package. Frequently asked questions (and answers) will be found in help.eng and help.ger. ------------------------------------------------------------------------------ Reporting bugs ------------------------------------------------------------------------------ If you find a bug please tell the author so that it can be corrected. Please send the following information which is needed for the task: - machine type (XT, AT, 386 &c.), CPU, BIOS, video card, printer (manufacturer and model), operating system and version number (note: SYSLEVEL command with OS/2). For instance: AT compatible, 286, Award, Paradise VGA, DeskJet+, IBM PC-DOS 3.3 . - the text of the autoexec.bat and config.sys in use when the error occurred: if possible, with an explanation of the programs called and drivers installed that are not part of the operating system. - emTeX version (date of issue, see head of readme.eng) - enough information for the error to be reproduced, if possible a disk (5.25" or 3.5") containing the appropriate files (see also dvidrv.doc). - the dvidrv log file, if the error is in a driver - the part of the printed output which shows the error, if the error is in a printer driver. Please inclose a self-addressed return package with postage if you expect a response. ------------------------------------------------------------------------------ Changes from earlier versions (with regard to the installation) ------------------------------------------------------------------------------ 16-Oct-1989 ----------- MFWARE: The .exe files were moved from the directory \emtex\mfjob to the directory \emtex. Please delete old .exe files in \emtex\mfjob. For further changes see mfjob.doc. 06-Nov-1989 ----------- TEX: tex286.exe new. ehyphen.tex renamed to ahyphen.tex. dhyphen.tex renamed to ghyphen.tex. In case you use your own .fmt files, these should be made over. DVIDRV: `view' renamed to `v'. Names of the environment variables changed (see *.cnf). Batch and configuration files changed. DVIDRVMA: dvitrans.* removed, graphic files now supplied. BIBTEX: ieeetr.bst and sample.bst removed (please delete). MF: Following files removed (delete in \emtex\mfinput!): grdov.mf, grdov5.mf, gresp.mf, gresp5.mf, gray.mf, black.mf, lgresp.mf, sldov6.mf, slaps4.mf, imhalf.mf, aphalf.mf, ddhalf.mf, blaps.mf, bldov.mf, blesp.mf, oneone.mf. mf286.exe new. In case you use your own .bas files, these have to be redone, since mf.poo has been changed. MISC_MF: The file \emtex\mfinput\trap.mf was removed (delete!). TEXWARE: Contains now the former package TEX_UTIL. MISC_TEX: Does not exist anymore. 12-Feb-1990 ----------- BTEX New. BLATEX New. MAKEINDX New. DVIDOT New (preliminary version, will be delivered later with DVIDRV). Fonts: Additional fonts (needed for LaTeX): cmcsc10 scaled 800; cmcsc10 scaled 900. fli files renamed (hp_* -> lj_*). IF YOU ALREADY ARE USING hp_*.fli-files: PLEASE RENAME. Fonts renamed: grayhp -> graylj, blackhp -> blacklj and slanthp -> slantlj Fonts renamed: grayeps -> grayfx, blackeps -> blackfx and slanteps -> slantfx Additional Fonts in lj_1500: graylj, blacklj, slantlj Additional Fonts in fx_1200: grayfx, blackfx, slantfx 21-Feb-1990 ----------- From now on all changes are documented in CHANGES.DOC. Changes that concern installation are also entered here. BMF New. 08-Aug-1990 ----------- GTEX: New. (Taken out of the TEX package.) GLATEX: New. (Taken out of the LATEX package.) GBTEX: New. (Taken out of the BTEX package.) GBLATEX: New. (Taken out of the BLATEX package.) TEXCAD New. DVIDOT: Now to be found in the DVIDRV package. There is no longer an \emtex\doc\dvidot.doc, please delete it. DVIDRV: The old dot matrix drivers have been replaced by dvidot: dvifx, dviitoh, dviaiw, dvip6l, dvip6m, dvip6h have been removed. DVIDRV: .cnf- .bat- and .cmd files changed. If you have made your own alterations to these file, you should alter the new files appropriately. The `manual' font has been renamed `manfnt' (this is the standard name). You should delete \emtex\tfm\manual.tfm and \emtex\mfinput\manual.mf. ghyphen.min and ghyphen.max have replaced ghyphen.tex (which was out of date). Please delete ghyphen.tex. ahyphen.tex has again been changed to hyphen.tex (it will stay like that now). Please delete ahyphen.tex. The program remove can be used to remove the files making up a package from the installed system. bglatex.cmd and bglatex.bat have been renamed gblatex.cmd and gblatex.bat respecitvely. Please delete bglatex.cmd and bglatex.bat. MFWARE: mfjob1.exe and mfjob2.exe have been renamed mfjob1.ovl and mfjob2.ovl; please delete mfjob1.exe and mfjob2.exe. GLATEX: no longer contains modified sty files, as the LATEX package now contains ILaTeX. Please delete all files from the \emtex\texinput\german directory and change the environment variable TEXINPUT appropriately. LATEX: latex.dif no longer there; doc files are now in the LATEXDOC package. LATEXDOC: New. Documentation in English, as far as is available, will be found in the \ emtex\doc\english directory. German documentation is to be found in \emtex\doc\german. If a document is available in only one language, it will be found in \emtex\doc. Frequently asked questions (and answers) will be found in help.eng and help.ger. Now both German and English versions of changes.doc: changes.ger and changes.eng. Changes amde in earlier versions are detailed in changes.pre. delete: ***ATTENTION***: meaning of -n option changed! 20-Aug-1990 ----------- cmman.tfm and manfnt.tfm moved from MISC_MF package to TEX package. 25-Sep-1990 ----------- The file format of font library files has changed. If you own font library files of an old emTeX distribution, the fli files must be converted to the new format. First, copy the complete new DVIDRV package onto your disk. Then, change to the directory containing the fli files and start the batch file newfonts, giving the path name of the file `fontlist' as argument (\emtex\fontlist with the correct drive). Example (fonts in c:\texfonts, emTeX on disk D): c: cd \texfonts newfonts d:\emtex\fontlist 1200 KB of disk space must be available. The fonts circle10 and circlew10 have been renamed lcircle10 (lcircle1) and lcirclew10 (lcirclew). Please delete the files \emtex\tfm\circle10.tfm \emtex\tfm\circlew1.tfm These fonts were also renamed in the font libarary files. If you're using old dvi files with new fonts, you have to use the font substitution file newfonts.sub (/ps=c:\emtex\newfonts). If you're using new dvi files with old fonts, you have to use the font substitution file oldfonts.sub (/ps=c:\emtex\oldfonts). If you have fonts in directories named like \emtex\pixel.fx\pxl$s, you should rename these directories \emtex\pixel.fx\$rdpi, replacing $r with $s/5 (rounded). Example: \emtex\pixel.lj\pxl1800 --> \emtex\pixel.lj\360dpi 02-Jul-1991 ----------- DVIDRVMA: dvidrv.dvi (German version) moved from \emtex\doc to \emtex\doc\german. Please delete \emtex\doc\dvidrv.dvi. 06-Oct-1991 ----------- TEX: emtex.dvi (German version) moved from \emtex\doc to \emtex\doc\german. Please delete \emtex\doc\emtex.dvi. 10-Jun-1992 ----------- New LaTeX version. The following ZIP files have been changed: BLATEX.ZIP BTEX2.ZIP GBLATEX.ZIP GBTEX.ZIP GLATEX.ZIP GTEX.ZIP LATEX1.ZIP LATEX2.ZIP LATEXDOC.ZIP MAKEINDX.ZIP TEX2.ZIP 23-Jun-1992 ----------- Bugs fixed, new MakeIndex version. The following ZIP files have been changed: BLATEX.ZIP GBLATEX.ZIP GLATEX.ZIP LATEX2.ZIP MAKEINDX.ZIP Known bug: \righthyphenmin is not set to 2 when generating plaing.fmt. -------- End of README.ENG -------------