commit bfe3046ecafdd71ba6932deebe2eb357048b7bfc Author: Greg Kroah-Hartman Date: Fri Feb 28 17:22:29 2020 +0100 Linux 5.4.23 commit bb7ffcbec2279c23d35d8ff9cbb708713d4f52bb Author: Sathyanarayana Nujella Date: Fri Dec 20 11:10:36 2019 -0600 ASoC: SOF: Intel: hda: Add iDisp4 DAI commit e68d6696575e1af3f92125e842f2853708f34589 upstream. TGL supports more than three iDisp DAI's. Add support for iDisp4 CPU DAI. Without this patch, we saw the below error on our TGL DUT: sof_rt5682 tgl_max98357a_rt5682: ASoC: CPU DAI iDisp4 Pin not registered Signed-off-by: Sathyanarayana Nujella Signed-off-by: Jairaj Arava Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20191220171037.10689-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown Cc: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit fb81480206aee50bf10c273c259e1fa8077ab5a0 Author: John Fastabend Date: Sun Feb 9 21:44:37 2020 -0800 bpf: Selftests build error in sockmap_basic.c commit f2e97dc126b712c0d21219ed0c42710006c1cf52 upstream. Fix following build error. We could push a tcp.h header into one of the include paths, but I think its easy enough to simply pull in the three defines we need here. If we end up using more of tcp.h at some point we can pull it in later. /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’: /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function) repair = TCP_REPAIR_ON; ^ /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function) repair = TCP_REPAIR_OFF_NO_WP; Then with fix, $ ./test_progs -n 44 #44/1 sockmap create_update_free:OK #44/2 sockhash create_update_free:OK #44 sockmap_basic:OK Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower Signed-off-by: Greg Kroah-Hartman commit 19be2b3eea34601882712eab70d7988c6227b12e Author: Nathan Chancellor Date: Thu Feb 13 23:42:07 2020 -0700 s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range commit 380324734956c64cd060e1db4304f3117ac15809 upstream. Clang warns: In file included from ../arch/s390/purgatory/purgatory.c:10: In file included from ../include/linux/kexec.h:18: In file included from ../include/linux/crash_core.h:6: In file included from ../include/linux/elfcore.h:5: In file included from ../include/linux/user.h:1: In file included from ../arch/s390/include/asm/user.h:11: ../arch/s390/include/asm/page.h:45:6: warning: converting the result of '<<' to a boolean always evaluates to false [-Wtautological-constant-compare] if (PAGE_DEFAULT_KEY) ^ ../arch/s390/include/asm/page.h:23:44: note: expanded from macro 'PAGE_DEFAULT_KEY' #define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) ^ 1 warning generated. Explicitly compare this against zero to silence the warning as it is intended to be used in a boolean context. Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0") Link: https://github.com/ClangBuiltLinux/linux/issues/860 Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com Acked-by: Christian Borntraeger Signed-off-by: Nathan Chancellor Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 148c8531b69c8dd3d89b21023c813542e4c40c58 Author: Nathan Chancellor Date: Sat Feb 8 07:10:52 2020 -0700 s390/kaslr: Fix casts in get_random commit 788d671517b5c81efbed9310ccbadb8cca86a08e upstream. Clang warns: ../arch/s390/boot/kaslr.c:78:25: warning: passing 'char *' to parameter of type 'const u8 *' (aka 'const unsigned char *') converts between pointers to integer types with different sign [-Wpointer-sign] (char *) entropy, (char *) entropy, ^~~~~~~~~~~~~~~~ ../arch/s390/include/asm/cpacf.h:280:28: note: passing argument to parameter 'src' here u8 *dest, const u8 *src, long src_len) ^ 2 warnings generated. Fix the cast to match what else is done in this function. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Link: https://github.com/ClangBuiltLinux/linux/issues/862 Link: https://lkml.kernel.org/r/20200208141052.48476-1-natechancellor@gmail.com Signed-off-by: Nathan Chancellor Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit e26be2667399e6a15f0603d8e5323dee9642fa6e Author: Aya Levin Date: Wed Feb 12 15:17:25 2020 +0200 net/mlx5e: Fix crash in recovery flow without devlink reporter commit 1ad6c43c6a7b8627240c6cc19c69e31fedc596a7 upstream. When health reporters are not supported, recovery function is invoked directly, not via devlink health reporters. In this direct flow, the recover function input parameter was passed incorrectly and is causing a kernel oops. This patch is fixing the input parameter. Following call trace is observed on rx error health reporting. Internal error: Oops: 96000007 [#1] PREEMPT SMP Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703) Call trace: mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core] mlx5e_health_report+0x60/0x6c [mlx5_core] mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core] mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core] process_one_work+0x168/0x3d0 worker_thread+0x58/0x3d0 kthread+0x108/0x134 Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Aya Levin Signed-off-by: Parav Pandit Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit fca1cdd3417e22d8f7be1f4f5d11ff7a4c1d2141 Author: Huy Nguyen Date: Mon Feb 3 16:32:18 2020 -0600 net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa commit 3d9c5e023a0dbf3e117bb416cfefd9405bf5af0c upstream. rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 06320052ee693a7a049bfbcf42d209da48f10982 Author: Aya Levin Date: Mon Dec 9 14:08:18 2019 +0200 net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY commit 5ee090ed0da649b1febae2b7c285ac77d1e55a0c upstream. Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin Reported-by: Tariq Toukan Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 773dfd2223e30dcbc254e71b123a5b24d8adef7e Author: Thomas Gleixner Date: Wed Feb 19 18:30:26 2020 +0100 xen: Enable interrupts when calling _cond_resched() commit 8645e56a4ad6dcbf504872db7f14a2f67db88ef2 upstream. xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.de Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman commit 9724b3f28dabf0644018fcea3f2a46fedcb3d6b1 Author: Prabhakar Kushwaha Date: Sat Jan 25 03:37:29 2020 +0000 ata: ahci: Add shutdown to freeze hardware resources of ahci commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 8eb92c122840227cce98d301f77f2ba4d3810264 Author: Stefano Garzarella Date: Fri Feb 21 16:42:16 2020 +0100 io_uring: prevent sq_thread from spinning when it should stop commit 7143b5ac5750f404ff3a594b34fdf3fc2f99f828 upstream. This patch drops 'cur_mm' before calling cond_resched(), to prevent the sq_thread from spinning even when the user process is finished. Before this patch, if the user process ended without closing the io_uring fd, the sq_thread continues to spin until the 'sq_thread_idle' timeout ends. In the worst case where the 'sq_thread_idle' parameter is bigger than INT_MAX, the sq_thread will spin forever. Fixes: 6c271ce2f1d5 ("io_uring: add submission polling") Signed-off-by: Stefano Garzarella Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit b0f5f25c5541a812e63fe147fefa2cb0e9bd0530 Author: David Howells Date: Thu Feb 6 13:57:40 2020 +0000 rxrpc: Fix call RCU cleanup using non-bh-safe locks commit 963485d436ccc2810177a7b08af22336ec2af67b upstream. rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a put call, calls rxrpc_put_connection() which, deep in its bowels, takes a number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and local->client_conns_lock. RCU callbacks, however, are normally called from softirq context, which can cause lockdep to notice the locking inconsistency. To get lockdep to detect this, it's necessary to have the connection cleaned up on the put at the end of the last of its calls, though normally the clean up is deferred. This can be induced, however, by starting a call on an AF_RXRPC socket and then closing the socket without reading the reply. Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a workqueue if in softirq-mode and defer the destruction to process context. Note that another way to fix this could be to add a bunch of bh-disable annotations to the spinlocks concerned - and there might be more than just those two - but that means spending more time with BHs disabled. Note also that some of these places were covered by bh-disable spinlocks belonging to the rxrpc_transport object, but these got removed without the _bh annotation being retained on the next lock in. Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by: David Howells cc: Hillf Danton Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 829e0a0ae2dc7aaeb46f716be3f52f498de2bdd8 Author: Cong Wang Date: Sun Feb 2 20:30:53 2020 -0800 netfilter: xt_hashlimit: limit the max size of hashtable commit 8d0015a7ab76b8b1e89a3e5f5710a6e5103f2dd5 upstream. The user-specified hashtable size is unbound, this could easily lead to an OOM or a hung task as we hold the global mutex while allocating and initializing the new hashtable. Add a max value to cap both cfg->size and cfg->max, as suggested by Florian. Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Signed-off-by: Cong Wang Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 86502c68b81eb98fc0f0c6bd87cda01cb7a4cd9d Author: Takashi Iwai Date: Fri Feb 14 12:13:15 2020 +0100 ALSA: seq: Fix concurrent access to queue current tick/time commit dc7497795e014d84699c3b8809ed6df35352dd74 upstream. snd_seq_check_queue() passes the current tick and time of the given queue as a pointer to snd_seq_prioq_cell_out(), but those might be updated concurrently by the seq timer update. Fix it by retrieving the current tick and time via the proper helper functions at first, and pass those values to snd_seq_prioq_cell_out() later in the loops. snd_seq_timer_get_cur_time() takes a new argument and adjusts with the current system time only when it's requested so; this update isn't needed for snd_seq_check_queue(), as it's called either from the interrupt handler or right after queuing. Also, snd_seq_timer_get_cur_tick() is changed to read the value in the spinlock for the concurrency, too. Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2b550d1c7ac67a8f31307d1d1904b79ba8621b2e Author: Takashi Iwai Date: Fri Feb 14 12:13:14 2020 +0100 ALSA: seq: Avoid concurrent access to queue flags commit bb51e669fa49feb5904f452b2991b240ef31bc97 upstream. The queue flags are represented in bit fields and the concurrent access may result in unexpected results. Although the current code should be mostly OK as it's only reading a field while writing other fields as KCSAN reported, it's safer to cover both with a proper spinlock protection. This patch fixes the possible concurrent read by protecting with q->owner_lock. Also the queue owner field is protected as well since it's the field to be protected by the lock itself. Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 84e041a5df797761e8053003c8994951d649014f Author: Takashi Iwai Date: Fri Feb 14 12:13:16 2020 +0100 ALSA: rawmidi: Avoid bit fields for state flags commit dfa9a5efe8b932a84b3b319250aa3ac60c20f876 upstream. The rawmidi state flags (opened, append, active_sensing) are stored in bit fields that can be potentially racy when concurrently accessed without any locks. Although the current code should be fine, there is also no any real benefit by keeping the bitfields for this kind of short number of members. This patch changes those bit fields flags to the simple bool fields. There should be no size increase of the snd_rawmidi_substream by this change. Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit c7deb9612e35454968feb6b1b284ef6fda3b2bb0 Author: Xiaoguang Wang Date: Sat Feb 22 14:46:05 2020 +0800 io_uring: fix __io_iopoll_check deadlock in io_sq_thread commit c7849be9cc2dd2754c48ddbaca27c2de6d80a95d upstream. Since commit a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending"), if we already events pending, we won't enter poll loop. In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has been terminated and don't reap pending events which are already in cq ring, and there are some reqs in poll_list, io_sq_thread will enter __io_iopoll_check(), and find pending events, then return, this loop will never have a chance to exit. I have seen this issue in fio stress tests, to fix this issue, let io_sq_thread call io_iopoll_getevents() with argument 'min' being zero, and remove __io_iopoll_check(). Fixes: a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending") Signed-off-by: Xiaoguang Wang Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit d562fdad84dd7b3486a895d48d324e90048931ed Author: Vincenzo Frascino Date: Tue Feb 18 16:49:06 2020 +0000 arm64: lse: Fix LSE atomics with LLVM commit dd1f6308b28edf0452dd5dc7877992903ec61e69 upstream. Commit e0d5896bd356 ("arm64: lse: fix LSE atomics with LLVM's integrated assembler") broke the build when clang is used in connjunction with the binutils assembler ("-no-integrated-as"). This happens because __LSE_PREAMBLE is defined as ".arch armv8-a+lse", which overrides the version of the CPU architecture passed via the "-march" paramter to gas: $ aarch64-none-linux-gnu-as -EL -I ./arch/arm64/include -I ./arch/arm64/include/generated -I ./include -I ./include -I ./arch/arm64/include/uapi -I ./arch/arm64/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I ./init -I ./init -march=armv8.3-a -o init/do_mounts.o /tmp/do_mounts-d7992a.s /tmp/do_mounts-d7992a.s: Assembler messages: /tmp/do_mounts-d7992a.s:1959: Error: selected processor does not support `autiasp' /tmp/do_mounts-d7992a.s:2021: Error: selected processor does not support `paciasp' /tmp/do_mounts-d7992a.s:2157: Error: selected processor does not support `autiasp' /tmp/do_mounts-d7992a.s:2175: Error: selected processor does not support `paciasp' /tmp/do_mounts-d7992a.s:2494: Error: selected processor does not support `autiasp' Fix the issue by replacing ".arch armv8-a+lse" with ".arch_extension lse". Sami confirms that the clang integrated assembler does now support the '.arch_extension' directive, so this change will be fine even for LTO builds in future. Fixes: e0d5896bd356cd ("arm64: lse: fix LSE atomics with LLVM's integrated assembler") Cc: Catalin Marinas Cc: Will Deacon Reported-by: Amit Kachhap Tested-by: Sami Tolvanen Signed-off-by: Vincenzo Frascino Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 8132323eb39701b3b9e25685c772d2c5e51009a1 Author: Johannes Krude Date: Wed Feb 12 20:32:27 2020 +0100 bpf, offload: Replace bitwise AND by logical AND in bpf_prog_offload_info_fill commit e20d3a055a457a10a4c748ce5b7c2ed3173a1324 upstream. This if guards whether user-space wants a copy of the offload-jited bytecode and whether this bytecode exists. By erroneously doing a bitwise AND instead of a logical AND on user- and kernel-space buffer-size can lead to no data being copied to user-space especially when user-space size is a power of two and bigger then the kernel-space buffer. Fixes: fcfb126defda ("bpf: add new jited info fields in bpf_dev_offload and bpf_prog_info") Signed-off-by: Johannes Krude Signed-off-by: Daniel Borkmann Acked-by: Jakub Kicinski Link: https://lore.kernel.org/bpf/20200212193227.GA3769@phlox.h.transitiv.net Signed-off-by: Greg Kroah-Hartman commit 2463a30f6678db61e3675957cee7016c238b3639 Author: Thomas Gleixner Date: Wed Feb 12 12:19:41 2020 +0100 genirq/proc: Reject invalid affinity masks (again) commit cba6437a1854fde5934098ec3bd0ee83af3129f5 upstream. Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code, which catches cases where the affinity setting is not done on the CPU which is the current target of the interrupt, triggers during CPU hotplug stress testing. It turns out that the warning which was added with the commit addressing the MSI affinity race unearthed yet another long standing bug. If user space writes a bogus affinity mask, i.e. it contains no online CPUs, then it calls irq_select_affinity_usr(). This was introduced for ALPHA in eee45269b0f5 ("[PATCH] Alpha: convert to generic irq framework (generic part)") and subsequently made available for all architectures in 18404756765c ("genirq: Expose default irq affinity mask (take 3)") which introduced the circumvention of the affinity setting restrictions for interrupt which cannot be moved in process context. The whole exercise is bogus in various aspects: 1) If the interrupt is already started up then there is absolutely no point to honour a bogus interrupt affinity setting from user space. The interrupt is already assigned to an online CPU and it does not make any sense to reassign it to some other randomly chosen online CPU. 2) If the interupt is not yet started up then there is no point either. A subsequent startup of the interrupt will invoke irq_setup_affinity() anyway which will chose a valid target CPU. So the only correct solution is to just return -EINVAL in case user space wrote an affinity mask which does not contain any online CPUs, except for ALPHA which has it's own magic sauce for this. Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)") Reported-by: Qian Cai Signed-off-by: Thomas Gleixner Tested-by: Qian Cai Link: https://lkml.kernel.org/r/878sl8xdbm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman commit c23074e20989521b2ecdb50f96d0384b6cf6dc12 Author: Tianjia Zhang Date: Mon Feb 10 20:44:39 2020 +0800 crypto: rename sm3-256 to sm3 in hash_algo_name commit 6a30e1b1dcad0ba94fae757f797812d7d8dcb72c upstream. The name sm3-256 is defined in hash_algo_name in hash_info, but the algorithm name implemented in sm3_generic.c is sm3, which will cause the sm3-256 algorithm to be not found in some application scenarios of the hash algorithm, and an ENOENT error will occur. For example, IMA, keys, and other subsystems that reference hash_algo_name all use the hash algorithm of sm3. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Tianjia Zhang Reviewed-by: Pascal van Leeuwen Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit 8278f34f6ca882d95f9cabe7f55bdcb05caeb396 Author: Joerg Roedel Date: Mon Feb 10 10:36:56 2020 +0100 iommu/vt-d: Fix compile warning from intel-svm.h commit e7598fac323aad0e502415edeffd567315994dd6 upstream. The intel_svm_is_pasid_valid() needs to be marked inline, otherwise it causes the compile warning below: CC [M] drivers/dma/idxd/cdev.o In file included from drivers/dma/idxd/cdev.c:9:0: ./include/linux/intel-svm.h:125:12: warning: ‘intel_svm_is_pasid_valid’ defined but not used [-Wunused-function] static int intel_svm_is_pasid_valid(struct device *dev, int pasid) ^~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Borislav Petkov Fixes: 15060aba71711 ('iommu/vt-d: Helper function to query if a pasid has any active users') Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit cfde4697ea4d66c7bfb1599eef189211471b2c38 Author: Aditya Pakki Date: Fri Feb 14 12:21:01 2020 -0600 ecryptfs: replace BUG_ON with error handling code commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72 upstream. In crypt_scatterlist, if the crypt_stat argument is not set up correctly, the kernel crashes. Instead, by returning an error code upstream, the error is handled safely. The issue is detected via a static analysis tool written by us. Fixes: 237fead619984 (ecryptfs: fs/Makefile and fs/Kconfig) Signed-off-by: Aditya Pakki Signed-off-by: Tyler Hicks Signed-off-by: Greg Kroah-Hartman commit 4c585d1e98d946cc89d9c3bbeaaa700e85d55599 Author: Oleksandr Suvorov Date: Wed Feb 5 18:04:36 2020 +0200 ASoC: fsl_sai: Fix exiting path on probing failure commit d1520889782dff58610c0b6b54d4cf3211ceb690 upstream. If the imx-sdma driver is built as a module, the fsl-sai device doesn't disable on probing failure, which causes the warning in the next probing: ================================================================== fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! ================================================================== Disabling the device properly fixes the issue. Fixes: 812ad463e089 ("ASoC: fsl_sai: Add support for runtime pm") Signed-off-by: Oleksandr Suvorov Link: https://lore.kernel.org/r/20200205160436.3813642-1-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 59c723344aec886e89dfa6bee0c5bafe0f4dcf1f Author: Arnd Bergmann Date: Thu Jan 30 15:05:45 2020 +0200 ASoC: atmel: fix atmel_ssc_set_audio link failure commit 9437bfda00f3b26eb5f475737ddaaf4dc07fee4f upstream. The ssc audio driver can call into both pdc and dma backends. With the latest rework, the logic to do this in a safe way avoiding link errors was removed, bringing back link errors that were fixed long ago in commit 061981ff8cc8 ("ASoC: atmel: properly select dma driver state") such as sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': atmel_ssc_dai.c:(.text+0xac): undefined reference to `atmel_pcm_pdc_platform_register' Fix it this time using Makefile hacks and a comment to prevent this from accidentally getting removed again rather than Kconfig hacks. Fixes: 18291410557f ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig") Signed-off-by: Arnd Bergmann Signed-off-by: Codrin Ciubotariu Link: https://lore.kernel.org/r/20200130130545.31148-1-codrin.ciubotariu@microchip.com Reviewed-by: Michał Mirosław Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 125b4a5345e2c4c51b373f984d9e1842bab4b930 Author: Dan Carpenter Date: Wed Feb 5 15:32:17 2020 +0300 staging: greybus: use after free in gb_audio_manager_remove_all() commit b7db58105b80fa9232719c8329b995b3addfab55 upstream. When we call kobject_put() and it's the last reference to the kobject then it calls gb_audio_module_release() and frees module. We dereference "module" on the next line which is a use after free. Fixes: c77f85bbc91a ("greybus: audio: Fix incorrect counting of 'ida'") Signed-off-by: Dan Carpenter Acked-by: Viresh Kumar Reviewed-by: Vaibhav Agarwal Link: https://lore.kernel.org/r/20200205123217.jreendkyxulqsool@kili.mountain Signed-off-by: Greg Kroah-Hartman commit 2ca19dfafc04f33bfeaacad89590ce028fffba7b Author: Colin Ian King Date: Sun Jan 26 22:05:49 2020 +0000 staging: rtl8723bs: fix copy of overlapping memory commit 8ae9a588ca35eb9c32dc03299c5e1f4a1e9a9617 upstream. Currently the rtw_sprintf prints the contents of thread_name onto thread_name and this can lead to a potential copy of a string over itself. Avoid this by printing the literal string RTWHALXT instread of the contents of thread_name. Addresses-Coverity: ("copy of overlapping memory") Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Colin Ian King Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200126220549.9849-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit e6535a8c5d9887cfa36148a6609df54db0cca0e6 Author: Minas Harutyunyan Date: Tue Jan 21 14:24:04 2020 +0400 usb: dwc2: Fix in ISOC request length checking commit 860ef6cd3f90b84a1832f8a6485c90c34d3b588b upstream. Moved ISOC request length checking from dwc2_hsotg_start_req() function to dwc2_hsotg_ep_queue(). Fixes: 4fca54aa58293 ("usb: gadget: s3c-hsotg: add multi count support") Signed-off-by: Minas Harutyunyan Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit ceb1997a2ec39e38bd86f1d5e822f21695005e00 Author: Jack Pham Date: Thu Jan 30 19:10:35 2020 -0800 usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus commit c724417baf162bd3e035659e22cdf990cfb0d917 upstream. SuperSpeedPlus peripherals must report their bMaxPower of the configuration descriptor in units of 8mA as per the USB 3.2 specification. The current switch statement in encode_bMaxPower() only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so the latter falls back to USB 2.0 encoding which uses 2mA units. Replace the switch with a simple if/else. Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors") Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 826a43b22ce6cfe5e20ea981ba3d7f83cd9e5dc8 Author: Bart Van Assche Date: Wed Feb 12 21:09:00 2020 -0800 scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session" commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream. Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu Cc: Mike Marciniszyn Cc: Sagi Grimberg Reported-by: Dakshaja Uppalapati Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit d92e714a463d4350b6b036ad4b198fd93894f1ca Author: Bart Van Assche Date: Wed Feb 12 21:08:59 2020 -0800 scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout" commit 76261ada16dcc3be610396a46d35acc3efbda682 upstream. Since commit 04060db41178 introduces soft lockups when toggling network interfaces, revert it. Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu Cc: Mike Marciniszyn Cc: Sagi Grimberg Reported-by: Dakshaja Uppalapati Fixes: 04060db41178 ("scsi: RDMA/isert: Fix a recently introduced regression related to logout") Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 42b4f3c8ec0be6c98b470a2a0c7ca25169c96785 Author: Rob Clark Date: Thu Feb 13 12:01:35 2020 -0800 drm/msm/dpu: fix BGR565 vs RGB565 confusion commit 8fc7036ee652207ca992fbb9abb64090c355a9e0 upstream. The component order between the two was swapped, resulting in incorrect color when games with 565 visual hit the overlay path instead of GPU composition. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Rob Clark Reviewed-by: Sean Paul Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman commit 337cbf3ea85548d93945b08699e04eec78d69010 Author: Chris Wilson Date: Thu Feb 6 20:49:13 2020 +0000 drm/i915/gt: Protect defer_request() from new waiters commit 19b5f3b419a61808ff2713f1f30b8a88fe14ac9b upstream. Mika spotted <4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI <4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1 <4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018 <4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915] <4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05 <4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083 <4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122 <4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48 <4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe <4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8 <4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80 <4>[17436.705532] FS: 0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000 <4>[17436.705534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0 <4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4>[17436.705542] Call Trace: <4>[17436.705545] <4>[17436.705603] execlists_submission_tasklet+0xc0/0x130 [i915] which is us consuming a partially initialised new waiter in defer_requests(). We can prevent this by initialising the i915_dependency prior to making it visible, and since we are using a concurrent list_add/iterator mark them up to the compiler. Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-2-chris@chris-wilson.co.uk (cherry picked from commit f14f27b1663269a81ed62d3961fe70250a1a0623) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 93805d430c53ce0772f94f7869e8b8cf72d1c6d8 Author: Tomi Valkeinen Date: Mon Dec 9 10:27:07 2019 +0200 drm/bridge: tc358767: fix poll timeouts commit 8a6483ac634acda3f599f50082c652d2d37199c7 upstream. Link training fails with: Link training timeout waiting for LT_LOOPDONE! main link enable error: -110 This is caused by too tight timeouts, which were changed recently in aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()"). With a quick glance, the commit does not change the timeouts. However, the method of delaying/sleeping is different, and as the timeout in the previous implementation was not explicit, the new version in practice has much tighter timeout. The same change was made to other parts in the driver, but the link training timeout is the only one I have seen causing issues. Nevertheless, 1 us sleep is not very sane, and the timeouts look pretty tight, so lets fix all the timeouts. One exception was the aux busy poll, where the poll sleep was much longer than necessary (or optimal). I measured the times on my setup, and now the sleep times are set to such values that they result in multiple loops, but not too many (say, 5-10 loops). The timeouts were all increased to 100ms, which should be more than enough for all of these, but in case of bad errors, shouldn't stop the driver as multi-second timeouts could do. Signed-off-by: Tomi Valkeinen Fixes: aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()") Tested-by: Andrey Smirnov Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20191209082707.24531-1-tomi.valkeinen@ti.com Signed-off-by: Greg Kroah-Hartman commit 7de50906e77239df23fa867cb2c187fb7cf25853 Author: Igor Druzhinin Date: Mon Feb 3 15:07:01 2020 +0000 drm/i915/gvt: more locking for ppgtt mm LRU list commit 0e9d7bb293f3f9c3ee376b126141407efb265f31 upstream. When the lock was introduced in commit 72aabfb862e40 ("drm/i915/gvt: Add mutual lock for ppgtt mm LRU list") one place got lost. Fixes: 72aabfb862e4 ("drm/i915/gvt: Add mutual lock for ppgtt mm LRU list") Signed-off-by: Igor Druzhinin Reviewed-by: Zhenyu Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/1580742421-25194-1-git-send-email-igor.druzhinin@citrix.com Signed-off-by: Greg Kroah-Hartman commit 19f8fb273193a282403b0d14298aaa540d89c2eb Author: Chris Wilson Date: Fri Feb 7 21:14:52 2020 +0000 drm/i915/execlists: Always force a context reload when rewinding RING_TAIL commit b1339ecac661e1cf3e1dc78ac56bff3aeeaeb92c upstream. If we rewind the RING_TAIL on a context, due to a preemption event, we must force the context restore for the RING_TAIL update to be properly handled. Rather than note which preemption events may cause us to rewind the tail, compare the new request's tail with the previously submitted RING_TAIL, as it turns out that timeslicing was causing unexpected rewinds. -0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3 -0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964 -0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695 -0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 ^---- Note we unwind 2 requests from the same context -0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 -0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506 ^---- But to apply the new timeslice, we have to replay the first request before the new client can start -- the unexpected RING_TAIL rewind -0 0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 } synmark2-5425 2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0 synmark2-5425 2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000 ^---- Preemption event for the ELSP update; note the lite-restore synmark2-5425 2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 } synmark2-5425 2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 } synmark2-5425 2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695 synmark2-5425 2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695 synmark2-5425 2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2 synmark2-5425 2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000 synmark2-5425 2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 } synmark2-5425 2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040 synmark2-5425 2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 } synmark2-5425 2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists)) Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Cc: # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk (cherry picked from commit 5ba32c7be81e53ea8a27190b0f6be98e6c6779af) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 1e0175a15474130ca57ad17b3d1a4af5768a9b76 Author: Chris Wilson Date: Mon Dec 9 02:32:15 2019 +0000 drm/i915/gt: Detect if we miss WaIdleLiteRestore commit 82c69bf58650e644c61aa2bf5100b63a1070fd2f upstream. In order to avoid confusing the HW, we must never submit an empty ring during lite-restore, that is we should always advance the RING_TAIL before submitting to stay ahead of the RING_HEAD. Normally this is prevented by keeping a couple of spare NOPs in the request->wa_tail so that on resubmission we can advance the tail. This relies on the request only being resubmitted once, which is the normal condition as it is seen once for ELSP[1] and then later in ELSP[0]. On preemption, the requests are unwound and the tail reset back to the normal end point (as we know the request is incomplete and therefore its RING_HEAD is even earlier). However, if this w/a should fail we would try and resubmit the request with the RING_TAIL already set to the location of this request's wa_tail potentially causing a GPU hang. We can spot when we do try and incorrectly resubmit without advancing the RING_TAIL and spare any embarrassment by forcing the context restore. In the case of preempt-to-busy, we leave the requests running on the HW while we unwind. As the ring is still live, we cannot rewind our rq->tail without forcing a reload so leave it set to rq->wa_tail and only force a reload if we resubmit after a lite-restore. (Normally, the forced reload will be a part of the preemption event.) Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/673 Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Tvrtko Ursulin Reviewed-by: Tvrtko Ursulin Cc: stable@kernel.vger.org Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman commit 341c8e03a90a8d084a62fecaf97d31ca24b1d475 Author: Greg Kroah-Hartman Date: Thu Feb 27 10:45:54 2020 +0100 Revert "dmaengine: imx-sdma: Fix memory leak" This reverts commit 8a7aa4feeaeabc12181e1997a298eb73d2ed2d65 which is commit 02939cd167095f16328a1bd5cab5a90b550606df upstream. Andreas writes: This patch breaks our imx6 board with the attached trace. Reverting the patch makes it boot again. Reported-by: Andreas Tobler Cc: Sascha Hauer Cc: Robin Gong Cc: Vinod Koul Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9ad7f8df34d26ec5798ca6ad22e1a6a429840f29 Author: Filipe Manana Date: Thu Feb 20 13:29:49 2020 +0000 Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof commit a5ae50dea9111db63d30d700766dd5509602f7ad upstream. While logging the prealloc extents of an inode during a fast fsync we call btrfs_truncate_inode_items(), through btrfs_log_prealloc_extents(), while holding a read lock on a leaf of the inode's root (not the log root, the fs/subvol root), and then that function locks the file range in the inode's iotree. This can lead to a deadlock when: * the fsync is ranged * the file has prealloc extents beyond eof * writeback for a range different from the fsync range starts during the fsync * the size of the file is not sector size aligned Because when finishing an ordered extent we lock first a file range and then try to COW the fs/subvol tree to insert an extent item. The following diagram shows how the deadlock can happen. CPU 1 CPU 2 btrfs_sync_file() --> for range [0, 1MiB) --> inode has a size of 1MiB and has 1 prealloc extent beyond the i_size, starting at offset 4MiB flushes all delalloc for the range [0MiB, 1MiB) and waits for the respective ordered extents to complete --> before task at CPU 1 locks the inode, a write into file range [1MiB, 2MiB + 1KiB) is made --> i_size is updated to 2MiB + 1KiB --> writeback is started for that range, [1MiB, 2MiB + 4KiB) --> end offset rounded up to be sector size aligned btrfs_log_dentry_safe() btrfs_log_inode_parent() btrfs_log_inode() btrfs_log_changed_extents() btrfs_log_prealloc_extents() --> does a search on the inode's root --> holds a read lock on leaf X btrfs_finish_ordered_io() --> locks range [1MiB, 2MiB + 4KiB) --> end offset rounded up to be sector size aligned --> tries to cow leaf X, through insert_reserved_file_extent() --> already locked by the task at CPU 1 btrfs_truncate_inode_items() --> gets an i_size of 2MiB + 1KiB, which is not sector size aligned --> tries to lock file range [2MiB, (u64)-1) --> the start range is rounded down from 2MiB + 1K to 2MiB to be sector size aligned --> but the subrange [2MiB, 2MiB + 4KiB) is already locked by task at CPU 2 which is waiting to get a write lock on leaf X for which we are holding a read lock *** deadlock *** This results in a stack trace like the following, triggered by test case generic/561 from fstests: [ 2779.973608] INFO: task kworker/u8:6:247 blocked for more than 120 seconds. [ 2779.979536] Not tainted 5.6.0-rc2-btrfs-next-53 #1 [ 2779.984503] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2779.990136] kworker/u8:6 D 0 247 2 0x80004000 [ 2779.990457] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] [ 2779.990466] Call Trace: [ 2779.990491] ? __schedule+0x384/0xa30 [ 2779.990521] schedule+0x33/0xe0 [ 2779.990616] btrfs_tree_read_lock+0x19e/0x2e0 [btrfs] [ 2779.990632] ? remove_wait_queue+0x60/0x60 [ 2779.990730] btrfs_read_lock_root_node+0x2f/0x40 [btrfs] [ 2779.990782] btrfs_search_slot+0x510/0x1000 [btrfs] [ 2779.990869] btrfs_lookup_file_extent+0x4a/0x70 [btrfs] [ 2779.990944] __btrfs_drop_extents+0x161/0x1060 [btrfs] [ 2779.990987] ? mark_held_locks+0x6d/0xc0 [ 2779.990994] ? __slab_alloc.isra.49+0x99/0x100 [ 2779.991060] ? insert_reserved_file_extent.constprop.19+0x64/0x300 [btrfs] [ 2779.991145] insert_reserved_file_extent.constprop.19+0x97/0x300 [btrfs] [ 2779.991222] ? start_transaction+0xdd/0x5c0 [btrfs] [ 2779.991291] btrfs_finish_ordered_io+0x4f4/0x840 [btrfs] [ 2779.991405] btrfs_work_helper+0xaa/0x720 [btrfs] [ 2779.991432] process_one_work+0x26d/0x6a0 [ 2779.991460] worker_thread+0x4f/0x3e0 [ 2779.991481] ? process_one_work+0x6a0/0x6a0 [ 2779.991489] kthread+0x103/0x140 [ 2779.991499] ? kthread_create_worker_on_cpu+0x70/0x70 [ 2779.991515] ret_from_fork+0x3a/0x50 (...) [ 2780.026211] INFO: task fsstress:17375 blocked for more than 120 seconds. [ 2780.027480] Not tainted 5.6.0-rc2-btrfs-next-53 #1 [ 2780.028482] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2780.030035] fsstress D 0 17375 17373 0x00004000 [ 2780.030038] Call Trace: [ 2780.030044] ? __schedule+0x384/0xa30 [ 2780.030052] schedule+0x33/0xe0 [ 2780.030075] lock_extent_bits+0x20c/0x320 [btrfs] [ 2780.030094] ? btrfs_truncate_inode_items+0xf4/0x1150 [btrfs] [ 2780.030098] ? rcu_read_lock_sched_held+0x59/0xa0 [ 2780.030102] ? remove_wait_queue+0x60/0x60 [ 2780.030122] btrfs_truncate_inode_items+0x133/0x1150 [btrfs] [ 2780.030151] ? btrfs_set_path_blocking+0xb2/0x160 [btrfs] [ 2780.030165] ? btrfs_search_slot+0x379/0x1000 [btrfs] [ 2780.030195] btrfs_log_changed_extents.isra.8+0x841/0x93e [btrfs] [ 2780.030202] ? do_raw_spin_unlock+0x49/0xc0 [ 2780.030215] ? btrfs_get_num_csums+0x10/0x10 [btrfs] [ 2780.030239] btrfs_log_inode+0xf83/0x1124 [btrfs] [ 2780.030251] ? __mutex_unlock_slowpath+0x45/0x2a0 [ 2780.030275] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs] [ 2780.030282] ? dget_parent+0xa1/0x370 [ 2780.030309] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [ 2780.030329] btrfs_sync_file+0x3f3/0x490 [btrfs] [ 2780.030339] do_fsync+0x38/0x60 [ 2780.030343] __x64_sys_fdatasync+0x13/0x20 [ 2780.030345] do_syscall_64+0x5c/0x280 [ 2780.030348] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 2780.030356] RIP: 0033:0x7f2d80f6d5f0 [ 2780.030361] Code: Bad RIP value. [ 2780.030362] RSP: 002b:00007ffdba3c8548 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 2780.030364] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2d80f6d5f0 [ 2780.030365] RDX: 00007ffdba3c84b0 RSI: 00007ffdba3c84b0 RDI: 0000000000000003 [ 2780.030367] RBP: 000000000000004a R08: 0000000000000001 R09: 00007ffdba3c855c [ 2780.030368] R10: 0000000000000078 R11: 0000000000000246 R12: 00000000000001f4 [ 2780.030369] R13: 0000000051eb851f R14: 00007ffdba3c85f0 R15: 0000557a49220d90 So fix this by making btrfs_truncate_inode_items() not lock the range in the inode's iotree when the target root is a log root, since it's not needed to lock the range for log roots as the protection from the inode's lock and log_mutex are all that's needed. Fixes: 28553fa992cb28 ("Btrfs: fix race between shrinking truncate and fiemap") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 73e1f266327391303aa3da67ee28984e104c006f Author: Josef Bacik Date: Fri Jan 17 09:02:20 2020 -0500 btrfs: don't set path->leave_spinning for truncate commit 52e29e331070cd7d52a64cbf1b0958212a340e28 upstream. The only time we actually leave the path spinning is if we're truncating a small amount and don't actually free an extent, which is not a common occurrence. We have to set the path blocking in order to add the delayed ref anyway, so the first extent we find we set the path to blocking and stay blocking for the duration of the operation. With the upcoming file extent map stuff there will be another case that we have to have the path blocking, so just swap to blocking always. Note: this patch also fixes a warning after 28553fa992cb ("Btrfs: fix race between shrinking truncate and fiemap") got merged that inserts extent locks around truncation so the path must not leave spinning locks after btrfs_search_slot. [70.794783] BUG: sleeping function called from invalid context at mm/slab.h:565 [70.794834] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1141, name: rsync [70.794863] 5 locks held by rsync/1141: [70.794876] #0: ffff888417b9c408 (sb_writers#17){.+.+}, at: mnt_want_write+0x20/0x50 [70.795030] #1: ffff888428de28e8 (&type->i_mutex_dir_key#13/1){+.+.}, at: lock_rename+0xf1/0x100 [70.795051] #2: ffff888417b9c608 (sb_internal#2){.+.+}, at: start_transaction+0x394/0x560 [70.795124] #3: ffff888403081768 (btrfs-fs-01){++++}, at: btrfs_try_tree_write_lock+0x2f/0x160 [70.795203] #4: ffff888403086568 (btrfs-fs-00){++++}, at: btrfs_try_tree_write_lock+0x2f/0x160 [70.795222] CPU: 5 PID: 1141 Comm: rsync Not tainted 5.6.0-rc2-backup+ #2 [70.795362] Call Trace: [70.795374] dump_stack+0x71/0xa0 [70.795445] ___might_sleep.part.96.cold.106+0xa6/0xb6 [70.795459] kmem_cache_alloc+0x1d3/0x290 [70.795471] alloc_extent_state+0x22/0x1c0 [70.795544] __clear_extent_bit+0x3ba/0x580 [70.795557] ? _raw_spin_unlock_irq+0x24/0x30 [70.795569] btrfs_truncate_inode_items+0x339/0xe50 [70.795647] btrfs_evict_inode+0x269/0x540 [70.795659] ? dput.part.38+0x29/0x460 [70.795671] evict+0xcd/0x190 [70.795682] __dentry_kill+0xd6/0x180 [70.795754] dput.part.38+0x2ad/0x460 [70.795765] do_renameat2+0x3cb/0x540 [70.795777] __x64_sys_rename+0x1c/0x20 Reported-by: Dave Jones Fixes: 28553fa992cb ("Btrfs: fix race between shrinking truncate and fiemap") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba [ add note ] Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit d3d0fb9d42d3a3ff9a5d8c04c7c2ae680b947195 Author: Filipe Manana Date: Fri Feb 7 12:23:09 2020 +0000 Btrfs: fix race between shrinking truncate and fiemap commit 28553fa992cb28be6a65566681aac6cafabb4f2d upstream. When there is a fiemap executing in parallel with a shrinking truncate we can end up in a situation where we have extent maps for which we no longer have corresponding file extent items. This is generally harmless and at the moment the only consequences are missing file extent items representing holes after we expand the file size again after the truncate operation removed the prealloc extent items, and stale information for future fiemap calls (reporting extents that no longer exist or may have been reallocated to other files for example). Consider the following example: 1) Our inode has a size of 128KiB, one 128KiB extent at file offset 0 and a 1MiB prealloc extent at file offset 128KiB; 2) Task A starts doing a shrinking truncate of our inode to reduce it to a size of 64KiB. Before it searches the subvolume tree for file extent items to delete, it drops all the extent maps in the range from 64KiB to (u64)-1 by calling btrfs_drop_extent_cache(); 3) Task B starts doing a fiemap against our inode. When looking up for the inode's extent maps in the range from 128KiB to (u64)-1, it doesn't find any in the inode's extent map tree, since they were removed by task A. Because it didn't find any in the extent map tree, it scans the inode's subvolume tree for file extent items, and it finds the 1MiB prealloc extent at file offset 128KiB, then it creates an extent map based on that file extent item and adds it to inode's extent map tree (this ends up being done by btrfs_get_extent() <- btrfs_get_extent_fiemap() <- get_extent_skip_holes()); 4) Task A then drops the prealloc extent at file offset 128KiB and shrinks the 128KiB extent file offset 0 to a length of 64KiB. The truncation operation finishes and we end up with an extent map representing a 1MiB prealloc extent at file offset 128KiB, despite we don't have any more that extent; After this the two types of problems we have are: 1) Future calls to fiemap always report that a 1MiB prealloc extent exists at file offset 128KiB. This is stale information, no longer correct; 2) If the size of the file is increased, by a truncate operation that increases the file size or by a write into a file offset > 64KiB for example, we end up not inserting file extent items to represent holes for any range between 128KiB and 128KiB + 1MiB, since the hole expansion function, btrfs_cont_expand() will skip hole insertion for any range for which an extent map exists that represents a prealloc extent. This causes fsck to complain about missing file extent items when not using the NO_HOLES feature. The second issue could be often triggered by test case generic/561 from fstests, which runs fsstress and duperemove in parallel, and duperemove does frequent fiemap calls. Essentially the problems happens because fiemap does not acquire the inode's lock while truncate does, and fiemap locks the file range in the inode's iotree while truncate does not. So fix the issue by making btrfs_truncate_inode_items() lock the file range from the new file size to (u64)-1, so that it serializes with fiemap. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit c383f8ad2a12091a951df1f9a7770e17750a16da Author: Filipe Manana Date: Thu Feb 13 12:29:50 2020 +0000 Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents commit e75fd33b3f744f644061a4f9662bd63f5434f806 upstream. In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress. All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits: ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before writeback happens") 28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after IO error") don't work when there are multiple ordered extents in the range. Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error. Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 9af8e258895fed6b775238d7a3b2795fbdc41d88 Author: Josef Bacik Date: Thu Feb 13 10:47:29 2020 -0500 btrfs: do not check delayed items are empty for single transaction cleanup commit 1e90315149f3fe148e114a5de86f0196d1c21fa5 upstream. btrfs_assert_delayed_root_empty() will check if the delayed root is completely empty, but this is a filesystem-wide check. On cleanup we may have allowed other transactions to begin, for whatever reason, and thus the delayed root is not empty. So remove this check from cleanup_one_transation(). This however can stay in btrfs_cleanup_transaction(), because it checks only after all of the transactions have been properly cleaned up, and thus is valid. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Johannes Thumshirn Reviewed-by: Nikolay Borisov Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 6065ca5d013d356c8ecbb4c5b63c3b27d69e1be6 Author: Josef Bacik Date: Thu Feb 13 10:47:28 2020 -0500 btrfs: reset fs_root to NULL on error in open_ctree commit 315bf8ef914f31d51d084af950703aa1e09a728c upstream. While running my error injection script I hit a panic when we tried to clean up the fs_root when freeing the fs_root. This is because fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by setting fs_info->fs_root = NULL; if we fail to read the root. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov Reviewed-by: Johannes Thumshirn Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 37a2e704807a6163315437253bcc0be10fce6565 Author: Josef Bacik Date: Thu Feb 13 10:47:31 2020 -0500 btrfs: fix bytes_may_use underflow in prealloc error condtition commit b778cf962d71a0e737923d55d0432f3bd287258e upstream. I hit the following warning while running my error injection stress testing: WARNING: CPU: 3 PID: 1453 at fs/btrfs/space-info.h:108 btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] RIP: 0010:btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] Call Trace: btrfs_free_reserved_data_space+0x4f/0x70 [btrfs] __btrfs_prealloc_file_range+0x378/0x470 [btrfs] elfcorehdr_read+0x40/0x40 ? elfcorehdr_read+0x40/0x40 ? btrfs_commit_transaction+0xca/0xa50 [btrfs] ? dput+0xb4/0x2a0 ? btrfs_log_dentry_safe+0x55/0x70 [btrfs] ? btrfs_sync_file+0x30e/0x420 [btrfs] ? do_fsync+0x38/0x70 ? __x64_sys_fdatasync+0x13/0x20 ? do_syscall_64+0x5b/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens if we fail to insert our reserved file extent. At this point we've already converted our reservation from ->bytes_may_use to ->bytes_reserved. However once we break we will attempt to free everything from [cur_offset, end] from ->bytes_may_use, but our extent reservation will overlap part of this. Fix this problem by adding ins.offset (our extent allocation size) to cur_offset so we remove the actual remaining part from ->bytes_may_use. I validated this fix using my inject-error.py script python inject-error.py -o should_fail_bio -t cache_save_setup -t \ __btrfs_prealloc_file_range \ -t insert_reserved_file_extent.constprop.0 \ -r "-5" ./run-fsstress.sh where run-fsstress.sh simply mounts and runs fsstress on a disk. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 40ea30638d20c92b44107247415842b72c460459 Author: Jeff Mahoney Date: Tue Feb 11 15:25:37 2020 +0800 btrfs: destroy qgroup extent records on transaction abort commit 81f7eb00ff5bb8326e82503a32809421d14abb8a upstream. We clean up the delayed references when we abort a transaction but we leave the pending qgroup extent records behind, leaking memory. This patch destroys the extent records when we destroy the delayed refs and makes sure ensure they're gone before releasing the transaction. Fixes: 3368d001ba5d ("btrfs: qgroup: Record possible quota-related extent for qgroup.") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Jeff Mahoney [ Rebased to latest upstream, remove to_qgroup() helper, use rbtree_postorder_for_each_entry_safe() wrapper ] Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 7e946e30a46d746237f1df1b0113377e2616dde9 Author: Miaohe Lin Date: Fri Feb 21 22:04:46 2020 +0800 KVM: apic: avoid calculating pending eoi from an uninitialized val commit 23520b2def95205f132e167cf5b25c609975e959 upstream. When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by: Vitaly Kuznetsov Signed-off-by: Miaohe Lin Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit dc5537061baf56f914f0f1339e301a87a8be8d57 Author: Vitaly Kuznetsov Date: Thu Feb 20 18:22:05 2020 +0100 KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1 commit 91a5f413af596ad01097e59bf487eb07cb3f1331 upstream. Even when APICv is disabled for L1 it can (and, actually, is) still available for L2, this means we need to always call vmx_deliver_nested_posted_interrupt() when attempting an interrupt delivery. Suggested-by: Paolo Bonzini Signed-off-by: Vitaly Kuznetsov Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 16f8553f75b594fc29fc7346aea0ec661456ec9d Author: Vitaly Kuznetsov Date: Thu Feb 20 18:22:04 2020 +0100 KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled commit a4443267800af240072280c44521caab61924e55 upstream. When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*), nothing happens to VMX MSRs on the already existing vCPUs, however, all new ones are created with PIN_BASED_POSTED_INTR filtered out. This is very confusing and results in the following picture inside the guest: $ rdmsr -ax 0x48d ff00000016 7f00000016 7f00000016 7f00000016 This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three. L1 hypervisor may only check CPU0's controls to find out what features are available and it will be very confused later. Switch to setting PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting. Signed-off-by: Vitaly Kuznetsov Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 0f042f5e98f17671395f584de9de7013056a09f6 Author: Oliver Upton Date: Tue Feb 4 15:26:31 2020 -0800 KVM: nVMX: Check IO instruction VM-exit conditions commit 35a571346a94fb93b5b3b6a599675ef3384bc75c upstream. Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution controls when checking instruction interception. If the 'use IO bitmaps' VM-execution control is 1, check the instruction access against the IO bitmaps to determine if the instruction causes a VM-exit. Signed-off-by: Oliver Upton Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit c4064f14f744021c3e23266ee9ecab0b7a7795c4 Author: Oliver Upton Date: Tue Feb 4 15:26:30 2020 -0800 KVM: nVMX: Refactor IO bitmap checks into helper function commit e71237d3ff1abf9f3388337cfebf53b96df2020d upstream. Checks against the IO bitmap are useful for both instruction emulation and VM-exit reflection. Refactor the IO bitmap checks into a helper function. Signed-off-by: Oliver Upton Reviewed-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit e5d25003d059649e18a249635ed5ca7a7b1de5ad Author: Eric Biggers Date: Wed Feb 19 10:30:47 2020 -0800 ext4: fix race between writepages and enabling EXT4_EXTENTS_FL commit cb85f4d23f794e24127f3e562cb3b54b0803f456 upstream. If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running on it, the following warning in ext4_add_complete_io() can be hit: WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120 Here's a minimal reproducer (not 100% reliable) (root isn't required): while true; do sync done & while true; do rm -f file touch file chattr -e file echo X >> file chattr +e file done The problem is that in ext4_writepages(), ext4_should_dioread_nolock() (which only returns true on extent-based files) is checked once to set the number of reserved journal credits, and also again later to select the flags for ext4_map_blocks() and copy the reserved journal handle to ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set, the first check can see dioread_nolock disabled while the later one can see it enabled, causing the reserved handle to unexpectedly be NULL. Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races related to doing so as well, fix this by synchronizing changing EXT4_EXTENTS_FL with ext4_writepages() via the existing s_writepages_rwsem (previously called s_journal_flag_rwsem). This was originally reported by syzbot without a reproducer at https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf, but now that dioread_nolock is the default I also started seeing this when running syzkaller locally. Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 5195dc6e9365ca8ec077cb6694c279aa716a4a9e Author: Eric Biggers Date: Wed Feb 19 10:30:46 2020 -0800 ext4: rename s_journal_flag_rwsem to s_writepages_rwsem commit bbd55937de8f2754adc5792b0f8e5ff7d9c0420e upstream. In preparation for making s_journal_flag_rwsem synchronize ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA flags (rather than just JOURNAL_DATA as it does currently), rename it to s_writepages_rwsem. Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 6ccdd6616a1c52a407910b3c773df8c74298cbb0 Author: Jan Kara Date: Fri Feb 21 11:08:35 2020 +0100 ext4: fix mount failure with quota configured as module commit 9db176bceb5c5df4990486709da386edadc6bd1d upstream. When CONFIG_QFMT_V2 is configured as a module, the test in ext4_feature_set_ok() fails and so mount of filesystems with quota or project features fails. Fix the test to use IS_ENABLED macro which works properly even for modules. Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz Fixes: d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel") Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit eac2bb1042b2586d3969a60e9f4360c73f5fcc05 Author: Suraj Jitindar Singh Date: Tue Feb 18 19:08:51 2020 -0800 ext4: fix potential race between s_flex_groups online resizing and access commit 7c990728b99ed6fbe9c75fc202fce1172d9916da upstream. During an online resize an array of s_flex_groups structures gets replaced so it can get enlarged. If there is a concurrent access to the array and this memory has been reused then this can lead to an invalid memory access. The s_flex_group array has been converted into an array of pointers rather than an array of structures. This is to ensure that the information contained in the structures cannot get out of sync during a resize due to an accessor updating the value in the old structure after it has been copied but before the array pointer is updated. Since the structures them- selves are no longer copied but only the pointers to them this case is mitigated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu Signed-off-by: Suraj Jitindar Singh Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 58631f8cbc24f70db7b9e4adc377038223a602b1 Author: Suraj Jitindar Singh Date: Tue Feb 18 19:08:50 2020 -0800 ext4: fix potential race between s_group_info online resizing and access commit df3da4ea5a0fc5d115c90d5aa6caa4dd433750a7 upstream. During an online resize an array of pointers to s_group_info gets replaced so it can get enlarged. If there is a concurrent access to the array in ext4_get_group_info() and this memory has been reused then this can lead to an invalid memory access. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.edu Signed-off-by: Suraj Jitindar Singh Signed-off-by: Theodore Ts'o Reviewed-by: Balbir Singh Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit bb43897de9b380a6366cb4fd636e9e0a4f04ec86 Author: Theodore Ts'o Date: Sat Feb 15 16:40:37 2020 -0500 ext4: fix potential race between online resizing and write operations commit 1d0c3924a92e69bfa91163bda83c12a994b4d106 upstream. During an online resize an array of pointers to buffer heads gets replaced so it can get enlarged. If there is a racing block allocation or deallocation which uses the old array, and the old array has gotten reused this can lead to a GPF or some other random kernel memory getting modified. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.edu Reported-by: Suraj Jitindar Singh Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit ded8c21ac49cb2f90053e04791b1e05390d2af4f Author: Shijie Luo Date: Sat Feb 15 03:02:06 2020 -0500 ext4: add cond_resched() to __ext4_find_entry() commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e upstream. We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 1673674ccd86a0a34c99e249c9117f46c5d4f3ad Author: Qian Cai Date: Fri Feb 7 09:29:11 2020 -0500 ext4: fix a data race in EXT4_I(inode)->i_disksize commit 35df4299a6487f323b0aca120ea3f485dfee2ae3 upstream. EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 56b3949a2b5ffc8c4cac3e992c5633ef3fad2339 Author: Miaohe Lin Date: Fri Feb 14 10:32:38 2020 +0800 KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI commit 7455a8327674e1a7c9a1f5dd1b0743ab6713f6d1 upstream. Commit 13db77347db1 ("KVM: x86: don't notify userspace IOAPIC on edge EOI") said, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. And var level indicates level-triggered interrupt. But commit 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") replace var level with irq.level by mistake. Fix it by changing irq.level to irq.trig_mode. Cc: stable@vger.kernel.org Fixes: 3159d36ad799 ("KVM: x86: use generic function for MSI parsing") Signed-off-by: Miaohe Lin Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 24dfae91a23a55c9f4cbe8fd778ed229ee9cced1 Author: Paolo Bonzini Date: Tue Feb 4 15:26:29 2020 -0800 KVM: nVMX: Don't emulate instructions in guest mode commit 07721feee46b4b248402133228235318199b05ec upstream. vmx_check_intercept is not yet fully implemented. To avoid emulating instructions disallowed by the L1 hypervisor, refuse to emulate instructions by default. Cc: stable@vger.kernel.org [Made commit, added commit msg - Oliver] Signed-off-by: Oliver Upton Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit e61c236dcf3416211008774b6c2bfa01753a82c1 Author: Suren Baghdasaryan Date: Mon Feb 3 13:22:16 2020 -0800 sched/psi: Fix OOB write when writing 0 bytes to PSI files commit 6fcca0fa48118e6d63733eb4644c6cd880c15b8f upstream. Issuing write() with count parameter set to 0 on any file under /proc/pressure/ will cause an OOB write because of the access to buf[buf_size-1] when NUL-termination is performed. Fix this by checking for buf_size to be non-zero. Signed-off-by: Suren Baghdasaryan Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Acked-by: Johannes Weiner Link: https://lkml.kernel.org/r/20200203212216.7076-1-surenb@google.com Signed-off-by: Greg Kroah-Hartman commit 26ae0493c181e989fc1e339a92f703228bae4c0c Author: Jani Nikula Date: Wed Feb 12 18:04:34 2020 +0200 drm/i915: Update drm/i915 bug filing URL commit 7ddc7005a0aa2f43a826b71f5d6bd7d4b90f8f2a upstream. We've moved from bugzilla to gitlab. Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-2-jani.nikula@intel.com (cherry picked from commit ddae4d7af0bbe3b2051f1603459a8b24e9a19324) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 2104c4905a08fe8119b69f7548259bc435b57c89 Author: Chris Wilson Date: Sun Feb 2 15:39:34 2020 +0000 drm/i915: Wean off drm_pci_alloc/drm_pci_free commit aa3146193ae25d0fe4b96d815169a135db2e8f01 upstream. drm_pci_alloc and drm_pci_free are just very thin wrappers around dma_alloc_coherent, with a note that we should be removing them. Furthermore since commit de09d31dd38a50fdce106c15abd68432eebbd014 Author: Kirill A. Shutemov Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. drm_pci_alloc has been declared broken since it mixes GFP_COMP and SetPageReserved. Avoid this conflict by weaning ourselves off using the abstraction and using the dma functions directly. Reported-by: Taketo Kabe Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by: Chris Wilson Cc: # v4.5+ Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk (cherry picked from commit c6790dc22312f592c1434577258b31c48c72d52a) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit 3e740fa80cc8124f0c715f24584684f5a9d26f43 Author: Lyude Paul Date: Wed Feb 12 18:11:49 2020 -0500 drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets commit f287d3d19769b1d22cba4e51fa0487f2697713c9 upstream. While certain modeset operations on gv100+ need us to temporarily disable the LUT, we make the mistake of sometimes neglecting to reprogram the LUT after such modesets. In particular, moving a head from one encoder to another seems to trigger this quite often. GV100+ is very picky about having a LUT in most scenarios, so this causes the display engine to hang with the following error code: disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 0000002d) So, fix this by always re-programming the LUT if we're clearing it in a state where the wndw is still visible, and has a XLUT handle programmed. Signed-off-by: Lyude Paul Fixes: facaed62b4cb ("drm/nouveau/kms/gv100: initial support") Cc: # v4.18+ Signed-off-by: Ben Skeggs Signed-off-by: Greg Kroah-Hartman commit 5e7dda6ddad18386be16e75f04eb661ba673ea42 Author: Alex Deucher Date: Wed Feb 12 08:52:32 2020 -0500 drm/amdgpu/gfx10: disable gfxoff when reading rlc clock commit b08c3ed609aabc4e76e74edc4404f0c26279d7ed upstream. Otherwise we readback all ones. Fixes rlc counter readback while gfxoff is active. Reviewed-by: Xiaojie Yuan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 7e482baf6d70ef7b347c1c399e2a5985c9b538ca Author: Alex Deucher Date: Wed Feb 12 08:51:29 2020 -0500 drm/amdgpu/gfx9: disable gfxoff when reading rlc clock commit 120cf959308e1bda984e40a9edd25ee2d6262efd upstream. Otherwise we readback all ones. Fixes rlc counter readback while gfxoff is active. Reviewed-by: Xiaojie Yuan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f141fac489ee22a19e6a104080dddd60600db939 Author: Alex Deucher Date: Wed Feb 12 01:46:16 2020 -0500 drm/amdgpu/soc15: fix xclk for raven commit c657b936ea98630ef5ba4f130ab1ad5c534d0165 upstream. It's 25 Mhz (refclk / 4). This fixes the interpretation of the rlc clock counter. Acked-by: Evan Quan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 95236ae76bf8c5a71bcbb90a0c46a564613831d7 Author: Catalin Marinas Date: Wed Feb 19 12:31:56 2020 +0000 mm: Avoid creating virtual address aliases in brk()/mmap()/mremap() commit dcde237319e626d1ec3c9d8b7613032f0fd4663a upstream. Currently the arm64 kernel ignores the top address byte passed to brk(), mmap() and mremap(). When the user is not aware of the 56-bit address limit or relies on the kernel to return an error, untagging such pointers has the potential to create address aliases in user-space. Passing a tagged address to munmap(), madvise() is permitted since the tagged pointer is expected to be inside an existing mapping. The current behaviour breaks the existing glibc malloc() implementation which relies on brk() with an address beyond 56-bit to be rejected by the kernel. Remove untagging in the above functions by partially reverting commit ce18d171cb73 ("mm: untag user pointers in mmap/munmap/mremap/brk"). In addition, update the arm64 tagged-address-abi.rst document accordingly. Link: https://bugzilla.redhat.com/1797052 Fixes: ce18d171cb73 ("mm: untag user pointers in mmap/munmap/mremap/brk") Cc: # 5.4.x- Cc: Florian Weimer Reviewed-by: Andrew Morton Reported-by: Victor Stinner Acked-by: Will Deacon Acked-by: Andrey Konovalov Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 9bb971b3356558034fd8a2167ad9ddace72c2017 Author: Alexander Potapenko Date: Thu Feb 20 20:04:30 2020 -0800 lib/stackdepot.c: fix global out-of-bounds in stack_slabs commit 305e519ce48e935702c32241f07d393c3c8fed3e upstream. Walter Wu has reported a potential case in which init_stack_slab() is called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been initialized. In that case init_stack_slab() will overwrite stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory corruption. Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Alexander Potapenko Reported-by: Walter Wu Cc: Dmitry Vyukov Cc: Matthias Brugger Cc: Thomas Gleixner Cc: Josh Poimboeuf Cc: Kate Stewart Cc: Greg Kroah-Hartman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit ef32399bf729c253b919b7da9af160e0a39c666c Author: Wei Yang Date: Thu Feb 20 20:04:27 2020 -0800 mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM commit 18e19f195cd888f65643a77a0c6aee8f5be6439a upstream. When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page() doesn't work before sparse_init_one_section() is called. This leads to a crash when hotplug memory: BUG: unable to handle page fault for address: 0000000006400000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G W 5.5.0-next-20200205+ #343 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:__memset+0x24/0x30 Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3 RSP: 0018:ffffb43ac0373c80 EFLAGS: 00010a87 RAX: ffffffffffffffff RBX: ffff8a1518800000 RCX: 0000000000050000 RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000006400000 RBP: 0000000000140000 R08: 0000000000100000 R09: 0000000006400000 R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000028 R14: 0000000000000000 R15: ffff8a153ffd9280 FS: 0000000000000000(0000) GS:ffff8a153ab00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000006400000 CR3: 0000000136fca000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sparse_add_section+0x1c9/0x26a __add_pages+0xbf/0x150 add_pages+0x12/0x60 add_memory_resource+0xc8/0x210 __add_memory+0x62/0xb0 acpi_memory_device_add+0x13f/0x300 acpi_bus_attach+0xf6/0x200 acpi_bus_scan+0x43/0x90 acpi_device_hotplug+0x275/0x3d0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x1a7/0x370 worker_thread+0x30/0x380 kthread+0x112/0x130 ret_from_fork+0x35/0x40 We should use memmap as it did. On x86 the impact is limited to x86_32 builds, or x86_64 configurations that override the default setting for SPARSEMEM_VMEMMAP. Other memory hotplug archs (arm64, ia64, and ppc) also default to SPARSEMEM_VMEMMAP=y. [dan.j.williams@intel.com: changelog update] {rppt@linux.ibm.com: changelog update] Link: http://lkml.kernel.org/r/20200219030454.4844-1-bhe@redhat.com Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Signed-off-by: Wei Yang Signed-off-by: Baoquan He Acked-by: David Hildenbrand Reviewed-by: Baoquan He Reviewed-by: Dan Williams Acked-by: Michal Hocko Cc: Mike Rapoport Cc: Oscar Salvador Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 198f5aa0f73e8747c4cf46a87d6d1f595e92af6b Author: Gavin Shan Date: Thu Feb 20 20:04:24 2020 -0800 mm/vmscan.c: don't round up scan size for online memory cgroup commit 76073c646f5f4999d763f471df9e38a5a912d70d upstream. Commit 68600f623d69 ("mm: don't miss the last page because of round-off error") makes the scan size round up to @denominator regardless of the memory cgroup's state, online or offline. This affects the overall reclaiming behavior: the corresponding LRU list is eligible for reclaiming only when its size logically right shifted by @sc->priority is bigger than zero in the former formula. For example, the inactive anonymous LRU list should have at least 0x4000 pages to be eligible for reclaiming when we have 60/12 for swappiness/priority and without taking scan/rotation ratio into account. After the roundup is applied, the inactive anonymous LRU list becomes eligible for reclaiming when its size is bigger than or equal to 0x1000 in the same condition. (0x4000 >> 12) * 60 / (60 + 140 + 1) = 1 ((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1 aarch64 has 512MB huge page size when the base page size is 64KB. The memory cgroup that has a huge page is always eligible for reclaiming in that case. The reclaiming is likely to stop after the huge page is reclaimed, meaing the further iteration on @sc->priority and the silbing and child memory cgroups will be skipped. The overall behaviour has been changed. This fixes the issue by applying the roundup to offlined memory cgroups only, to give more preference to reclaim memory from offlined memory cgroup. It sounds reasonable as those memory is unlikedly to be used by anyone. The issue was found by starting up 8 VMs on a Ampere Mustang machine, which has 8 CPUs and 16 GB memory. Each VM is given with 2 vCPUs and 2GB memory. It took 264 seconds for all VMs to be completely up and 784MB swap is consumed after that. With this patch applied, it took 236 seconds and 60MB swap to do same thing. So there is 10% performance improvement for my case. Note that KSM is disable while THP is enabled in the testing. total used free shared buff/cache available Mem: 16196 10065 2049 16 4081 3749 Swap: 8175 784 7391 total used free shared buff/cache available Mem: 16196 11324 3656 24 1215 2936 Swap: 8175 60 8115 Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com Fixes: 68600f623d69 ("mm: don't miss the last page because of round-off error") Signed-off-by: Gavin Shan Acked-by: Roman Gushchin Cc: [4.20+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 8735a5b6e1fb1f264b2478033fce3c7cf3325165 Author: Zenghui Yu Date: Fri Feb 21 10:07:25 2020 +0800 genirq/irqdomain: Make sure all irq domain flags are distinct commit 2546287c5fb363a0165933ae2181c92f03e701d0 upstream. This was noticed when printing debugfs for MSIs on my ARM64 server. The new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only be the x86 stuff for the time being... The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which is oddly defined as bit 6 for no good reason. Switch it to the non used bit 1. Fixes: 6f1a4891a592 ("x86/apic/msi: Plug non-maskable MSI affinity race") Signed-off-by: Zenghui Yu Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman commit 6e304262e3934d7bb4df0eb7cfc8fe6ffdf59916 Author: Logan Gunthorpe Date: Thu Feb 20 13:29:53 2020 -0700 nvme-multipath: Fix memory leak with ana_log_buf commit 3b7830904e17202524bad1974505a9bfc718d31f upstream. kmemleak reports a memory leak with the ana_log_buf allocated by nvme_mpath_init(): unreferenced object 0xffff888120e94000 (size 8208): comm "nvme", pid 6884, jiffies 4295020435 (age 78786.312s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e2360188>] kmalloc_order+0x97/0xc0 [<0000000079b18dd4>] kmalloc_order_trace+0x24/0x100 [<00000000f50c0406>] __kmalloc+0x24c/0x2d0 [<00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0 [<000000005802589e>] nvme_init_identify+0x75f/0x1600 [<0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280 [<00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710 [<00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9 [<000000004199f8d0>] __vfs_write+0x50/0xa0 [<0000000065466fef>] vfs_write+0xf3/0x280 [<00000000b0db9a8b>] ksys_write+0xc6/0x160 [<0000000082156b91>] __x64_sys_write+0x43/0x50 [<00000000c34fbb6d>] do_syscall_64+0x77/0x2f0 [<00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe nvme_mpath_init() is called by nvme_init_identify() which is called in multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This means nvme_mpath_init() may be called multiple times before nvme_mpath_uninit() (which is only called on nvme_free_ctrl()). When nvme_mpath_init() is called multiple times, it overwrites the ana_log_buf pointer with a new allocation, thus leaking the previous allocation. To fix this, free ana_log_buf before allocating a new one. Fixes: 0d0b660f214dc490 ("nvme: add ANA support") Cc: Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Logan Gunthorpe Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit e078c8d8971b0661870d6be448bba678294bf5dd Author: Vasily Averin Date: Thu Feb 20 20:04:18 2020 -0800 mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps() commit 75866af62b439859d5146b7093ceb6b482852683 upstream. for_each_mem_cgroup() increases css reference counter for memory cgroup and requires to use mem_cgroup_iter_break() if the walk is cancelled. Link: http://lkml.kernel.org/r/c98414fb-7e1f-da0f-867a-9340ec4bd30b@virtuozzo.com Fixes: 0a4465d34028 ("mm, memcg: assign memcg-aware shrinkers bitmap to memcg") Signed-off-by: Vasily Averin Acked-by: Kirill Tkhai Acked-by: Michal Hocko Reviewed-by: Roman Gushchin Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit aa4f749f8136258af24798f09fd4e4fc4c3ec3c9 Author: Ioanna Alifieraki Date: Thu Feb 20 20:04:00 2020 -0800 Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()" commit edf28f4061afe4c2d9eb1c3323d90e882c1d6800 upstream. This reverts commit a97955844807e327df11aa33869009d14d6b7de0. Commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") removes a lock that is needed. This leads to a process looping infinitely in exit_sem() and can also lead to a crash. There is a reproducer available in [1] and with the commit reverted the issue does not reproduce anymore. Using the reproducer found in [1] is fairly easy to reach a point where one of the child processes is looping infinitely in exit_sem between for(;;) and if (semid == -1) block, while it's trying to free its last sem_undo structure which has already been freed by freeary(). Each sem_undo struct is on two lists: one per semaphore set (list_id) and one per process (list_proc). The list_id list tracks undos by semaphore set, and the list_proc by process. Undo structures are removed either by freeary() or by exit_sem(). The freeary function is invoked when the user invokes a syscall to remove a semaphore set. During this operation freeary() traverses the list_id associated with the semaphore set and removes the undo structures from both the list_id and list_proc lists. For this case, exit_sem() is called at process exit. Each process contains a struct sem_undo_list (referred to as "ulp") which contains the head for the list_proc list. When the process exits, exit_sem() traverses this list to remove each sem_undo struct. As in freeary(), whenever a sem_undo struct is removed from list_proc, it is also removed from the list_id list. Removing elements from list_id is safe for both exit_sem() and freeary() due to sem_lock(). Removing elements from list_proc is not safe; freeary() locks &un->ulp->lock when it performs list_del_rcu(&un->list_proc) but exit_sem() does not (locking was removed by commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"). This can result in the following situation while executing the reproducer [1] : Consider a child process in exit_sem() and the parent in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)). - The list_proc for the child contains the last two undo structs A and B (the rest have been removed either by exit_sem() or freeary()). - The semid for A is 1 and semid for B is 2. - exit_sem() removes A and at the same time freeary() removes B. - Since A and B have different semid sem_lock() will acquire different locks for each process and both can proceed. The bug is that they remove A and B from the same list_proc at the same time because only freeary() acquires the ulp lock. When exit_sem() removes A it makes ulp->list_proc.next to point at B and at the same time freeary() removes B setting B->semid=-1. At the next iteration of for(;;) loop exit_sem() will try to remove B. The only way to break from for(;;) is for (&un->list_proc == &ulp->list_proc) to be true which is not. Then exit_sem() will check if B->semid=-1 which is and will continue looping in for(;;) until the memory for B is reallocated and the value at B->semid is changed. At that point, exit_sem() will crash attempting to unlink B from the lists (this can be easily triggered by running the reproducer [1] a second time). To prove this scenario instrumentation was added to keep information about each sem_undo (un) struct that is removed per process and per semaphore set (sma). CPU0 CPU1 [caller holds sem_lock(sma for A)] ... freeary() exit_sem() ... ... ... sem_lock(sma for B) spin_lock(A->ulp->lock) ... list_del_rcu(un_A->list_proc) list_del_rcu(un_B->list_proc) Undo structures A and B have different semid and sem_lock() operations proceed. However they belong to the same list_proc list and they are removed at the same time. This results into ulp->list_proc.next pointing to the address of B which is already removed. After reverting commit a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") the issue was no longer reproducible. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1694779 Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@canonical.com Fixes: a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()") Signed-off-by: Ioanna Alifieraki Acked-by: Manfred Spraul Acked-by: Herton R. Krzesinski Cc: Arnd Bergmann Cc: Catalin Marinas Cc: Cc: Joel Fernandes (Google) Cc: Davidlohr Bueso Cc: Jay Vosburgh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 7b77e5a082247f85ec8ed7f1555f83751ea750c9 Author: Rafael J. Wysocki Date: Fri Feb 21 01:46:18 2020 +0100 ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake() commit 63fb9623427fbb44e3782233b6e4714057b76ff2 upstream. Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit f18121a59b5ae07a6b2f7d089200196c3add8512 Author: Jani Nikula Date: Wed Feb 12 18:04:33 2020 +0200 MAINTAINERS: Update drm/i915 bug filing URL commit 96228b7df33f8eb9006f8ae96949400aed9bd303 upstream. We've moved from bugzilla to gitlab. Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-1-jani.nikula@intel.com (cherry picked from commit 3a6a4f0810c8ade6f1ff63c34aa9834176b9d88b) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit cf3c30a7112c88327a451ffc42624bdd881e1eab Author: Johan Hovold Date: Mon Feb 10 15:57:30 2020 +0100 serdev: ttyport: restore client ops on deregistration commit 0c5aae59270fb1f827acce182786094c9ccf598e upstream. The serdev tty-port controller driver should reset the tty-port client operations also on deregistration to avoid a NULL-pointer dereference in case the port is later re-registered as a normal tty device. Note that this can only happen with tty drivers such as 8250 which have statically allocated port structures that can end up being reused and where a later registration would not register a serdev controller (e.g. due to registration errors or if the devicetree has been changed in between). Specifically, this can be an issue for any statically defined ports that would be registered by 8250 core when an 8250 driver is being unbound. Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver") Cc: stable # 4.11 Reported-by: Loic Poulain Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200210145730.22762-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 80990c30b7764858b89a94f9319027e854f018ba Author: satya priya Date: Tue Feb 11 15:43:02 2020 +0530 tty: serial: qcom_geni_serial: Fix RX cancel command failure commit 679aac5ead2f18d223554a52b543e1195e181811 upstream. RX cancel command fails when BT is switched on and off multiple times. To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register instead of SE_GENI_S_CMD_CTRL_REG. As per the HPG update, handle the RX last bit after cancel command and flush out the RX FIFO buffer. Signed-off-by: satya priya Cc: stable Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org Signed-off-by: Greg Kroah-Hartman commit 5b0af5e5836838408ba2f8d3afba52f63aa37314 Author: Fugang Duan Date: Tue Feb 11 14:16:01 2020 +0800 tty: serial: imx: setup the correct sg entry for tx dma commit f76707831829530ffdd3888bebc108aecefccaa0 upstream. There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou Tested-by: Eagle Zhou Signed-off-by: Fugang Duan Cc: stable Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman commit 671ea19c3214082a6ec1562dbf740383766a472e Author: Nicolas Ferre Date: Mon Feb 10 16:20:53 2020 +0100 tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode commit 04b5bfe3dc94e64d0590c54045815cb5183fb095 upstream. In atmel_shutdown() we call atmel_stop_rx() and atmel_stop_tx() functions. Prevent the rx restart that is implemented in RS485 or ISO7816 modes when calling atmel_stop_tx() by using the atomic information tasklet_shutdown that is already in place for this purpose. Fixes: 98f2082c3ac4 ("tty/serial: atmel: enforce tasklet init and termination sequences") Signed-off-by: Nicolas Ferre Cc: stable Link: https://lore.kernel.org/r/20200210152053.8289-1-nicolas.ferre@microchip.com Signed-off-by: Greg Kroah-Hartman commit 5ae6e5683755058e9e87d796caa2dc02bd26982e Author: Andy Shevchenko Date: Tue Feb 11 15:55:59 2020 +0200 serial: 8250: Check UPF_IRQ_SHARED in advance commit 7febbcbc48fc92e3f33863b32ed715ba4aff18c4 upstream. The commit 54e53b2e8081 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[] irq_default_primary_handler threaded [] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f04937b3e ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing Cc: Kurt Kanzenbach Cc: Vikram Pandita Signed-off-by: Andy Shevchenko Cc: stable Acked-by: Kurt Kanzenbach Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit e0253c4220246fcd97bf9a92c604c1e36bd06c86 Author: Kim Phillips Date: Wed Feb 19 18:52:43 2020 +0100 x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF commit 21b5ee59ef18e27d85810584caf1f7ddc705ea83 upstream. Commit aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter") added support for access to the free-running counter via 'perf -e msr/irperf/', but when exercised, it always returns a 0 count: BEFORE: $ perf stat -e instructions,msr/irperf/ true Performance counter stats for 'true': 624,833 instructions 0 msr/irperf/ Simply set its enable bit - HWCR bit 30 - to make it start counting. Enablement is restricted to all machines advertising IRPERF capability, except those susceptible to an erratum that makes the IRPERF return bad values. That erratum occurs in Family 17h models 00-1fh [1], but not in F17h models 20h and above [2]. AFTER (on a family 17h model 31h machine): $ perf stat -e instructions,msr/irperf/ true Performance counter stats for 'true': 621,690 instructions 622,490 msr/irperf/ [1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors [2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors The revision guides are available from the bugzilla Link below. [ bp: Massage commit message. ] Fixes: aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter") Signed-off-by: Kim Phillips Signed-off-by: Borislav Petkov Cc: Peter Zijlstra Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com Signed-off-by: Greg Kroah-Hartman commit 88e4901d3ebd394ba079ea26536b8500fbd8e68b Author: Thomas Gleixner Date: Thu Feb 13 19:01:34 2020 +0100 x86/mce/amd: Fix kobject lifetime commit 51dede9c05df2b78acd6dcf6a17d21f0877d2d7b upstream. Accessing the MCA thresholding controls in sysfs concurrently with CPU hotplug can lead to a couple of KASAN-reported issues: BUG: KASAN: use-after-free in sysfs_file_ops+0x155/0x180 Read of size 8 at addr ffff888367578940 by task grep/4019 and BUG: KASAN: use-after-free in show_error_count+0x15c/0x180 Read of size 2 at addr ffff888368a05514 by task grep/4454 for example. Both result from the fact that the threshold block creation/teardown code frees the descriptor memory itself instead of defining proper ->release function and leaving it to the driver core to take care of that, after all sysfs accesses have completed. Do that and get rid of the custom freeing code, fixing the above UAFs in the process. [ bp: write commit message. ] Fixes: 95268664390b ("[PATCH] x86_64: mce_amd support for family 0x10 processors") Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20200214082801.13836-1-bp@alien8.de Signed-off-by: Greg Kroah-Hartman commit de2cce5ae563386c1c946a1a56e298f2f6074953 Author: Borislav Petkov Date: Tue Feb 4 13:28:41 2020 +0100 x86/mce/amd: Publish the bank pointer only after setup has succeeded commit 6e5cf31fbe651bed7ba1df768f2e123531132417 upstream. threshold_create_bank() creates a bank descriptor per MCA error thresholding counter which can be controlled over sysfs. It publishes the pointer to that bank in a per-CPU variable and then goes on to create additional thresholding blocks if the bank has such. However, that creation of additional blocks in allocate_threshold_blocks() can fail, leading to a use-after-free through the per-CPU pointer. Therefore, publish that pointer only after all blocks have been setup successfully. Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor") Reported-by: Saar Amar Reported-by: Dan Carpenter Signed-off-by: Borislav Petkov Cc: Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain Signed-off-by: Greg Kroah-Hartman commit 6df12de90e7469ed3cf0140401685992c6e2659b Author: Ard Biesheuvel Date: Sat Feb 1 09:32:21 2020 +0100 x86/ima: use correct identifier for SetupMode variable commit ff5ac61ee83c13f516544d29847d28be093a40ee upstream. The IMA arch code attempts to inspect the "SetupMode" EFI variable by populating a variable called efi_SetupMode_name with the string "SecureBoot" and passing that to the EFI GetVariable service, which obviously does not yield the expected result. Given that the string is only referenced a single time, let's get rid of the intermediate variable, and pass the correct string as an immediate argument. While at it, do the same for "SecureBoot". Fixes: 399574c64eaf ("x86/ima: retry detecting secure boot mode") Fixes: 980ef4d22a95 ("x86/ima: check EFI SetupMode too") Cc: Matthew Garrett Signed-off-by: Ard Biesheuvel Cc: stable@vger.kernel.org # v5.3 Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit 453692eb5a38864221f9fd8a46d9afb5bb048756 Author: wangyan Date: Thu Feb 20 21:46:14 2020 +0800 jbd2: fix ocfs2 corrupt when clearing block group bits commit 8eedabfd66b68a4623beec0789eac54b8c9d0fb6 upstream. I found a NULL pointer dereference in ocfs2_block_group_clear_bits(). The running environment: kernel version: 4.19 A cluster with two nodes, 5 luns mounted on two nodes, and do some file operations like dd/fallocate/truncate/rm on every lun with storage network disconnection. The fallocate operation on dm-23-45 caused an null pointer dereference. The information of NULL pointer dereference as follows: [577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45. [577992.878290] Aborting journal on device dm-23-45. ... [577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46. [577992.890908] __journal_remove_journal_head: freeing b_committed_data [577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30 [577992.890918] __journal_remove_journal_head: freeing b_committed_data [577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30 [577992.890922] __journal_remove_journal_head: freeing b_committed_data [577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30 [577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30 [577992.890928] __journal_remove_journal_head: freeing b_committed_data [577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30 [577992.890933] __journal_remove_journal_head: freeing b_committed_data [577992.890939] __journal_remove_journal_head: freeing b_committed_data [577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [577992.890950] Mem abort info: [577992.890951] ESR = 0x96000004 [577992.890952] Exception class = DABT (current EL), IL = 32 bits [577992.890952] SET = 0, FnV = 0 [577992.890953] EA = 0, S1PTW = 0 [577992.890954] Data abort info: [577992.890955] ISV = 0, ISS = 0x00000004 [577992.890956] CM = 0, WnR = 0 [577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9 [577992.890960] [0000000000000020] pgd=0000000000000000 [577992.890964] Internal error: Oops: 96000004 [#1] SMP [577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd) [577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1 [577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 [577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO) [577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2] [577992.891084] sp : ffff0000c8e2b810 [577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000 [577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70 [577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2 [577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30 [577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000 [577992.891097] x19: ffff000001681638 x18: ffffffffffffffff [577992.891098] x17: 0000000000000000 x16: ffff000080a03df0 [577992.891100] x15: ffff0000811d9708 x14: 203d207375746174 [577992.891101] x13: 73203a524f525245 x12: 20373439343a6565 [577992.891103] x11: 0000000000000038 x10: 0101010101010101 [577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f [577992.891109] x7 : 0000000000000000 x6 : 0000000000000080 [577992.891110] x5 : 0000000000000000 x4 : 0000000000000002 [577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00 [577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000 [577992.891116] Call trace: [577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2] [577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2] [577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2] [577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2] [577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2] [577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2] [577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2] [577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2] [577992.891316] vfs_fallocate+0x11c/0x250 [577992.891317] ksys_fallocate+0x54/0x88 [577992.891319] __arm64_sys_fallocate+0x28/0x38 [577992.891323] el0_svc_common+0x78/0x130 [577992.891325] el0_svc_handler+0x38/0x78 [577992.891327] el0_svc+0x8/0xc My analysis process as follows: ocfs2_fallocate __ocfs2_change_file_space ocfs2_allocate_extents ocfs2_extend_allocation ocfs2_add_inode_data ocfs2_add_clusters_in_btree ocfs2_insert_extent ocfs2_do_insert_extent ocfs2_rotate_tree_right ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2_journal_restart jbd2__journal_restart /* handle->h_transaction is NULL, * is_handle_aborted(handle) is true */ handle->h_transaction = NULL; start_this_handle return -EROFS; ocfs2_free_clusters _ocfs2_free_clusters _ocfs2_free_suballoc_bits ocfs2_block_group_clear_bits ocfs2_journal_access_gd __ocfs2_journal_access jbd2_journal_get_undo_access /* I think jbd2_write_access_granted() will * return true, because do_get_write_access() * will return -EROFS. */ if (jbd2_write_access_granted(...)) return 0; do_get_write_access /* handle->h_transaction is NULL, it will * return -EROFS here, so do_get_write_access() * was not called. */ if (is_handle_aborted(handle)) return -EROFS; /* bh2jh(group_bh) is NULL, caused NULL pointer dereference */ undo_bg = (struct ocfs2_group_desc *) bh2jh(group_bh)->b_committed_data; If handle->h_transaction == NULL, then jbd2_write_access_granted() does not really guarantee that journal_head will stay around, not even speaking of its b_committed_data. The bh2jh(group_bh) can be removed after ocfs2_journal_access_gd() and before call "bh2jh(group_bh)->b_committed_data". So, we should move is_handle_aborted() check from do_get_write_access() into jbd2_journal_get_undo_access() and jbd2_journal_get_write_access() before the call to jbd2_write_access_granted(). Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com Signed-off-by: Yan Wang Signed-off-by: Theodore Ts'o Reviewed-by: Jun Piao Reviewed-by: Jan Kara Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 98583fb54c2b12002c15b0171a5b9c75cb2e578c Author: Will Deacon Date: Wed Feb 19 10:19:13 2020 +0000 arm64: memory: Add missing brackets to untagged_addr() macro commit d0022c0ef29b78bcbe8a5c5894bd2307143afce1 upstream. Add brackets around the evaluation of the 'addr' parameter to the untagged_addr() macro so that the cast to 'u64' applies to the result of the expression. Cc: Fixes: 597399d0cb91 ("arm64: tags: Preserve tags for addresses translated via TTBR1") Reported-by: Linus Torvalds Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 9b9374cf1ea7ff2a899ae6f7557a64458d3b23b3 Author: Christophe Leroy Date: Sun Feb 9 16:02:41 2020 +0000 powerpc/hugetlb: Fix 8M hugepages on 8xx commit 50a175dd18de7a647e72aca7daf4744e3a5a81e3 upstream. With HW assistance all page tables must be 4k aligned, the 8xx drops the last 12 bits during the walk. Redefine HUGEPD_SHIFT_MASK to mask last 12 bits out. HUGEPD_SHIFT_MASK is used to for alignment of page table cache. Fixes: 22569b881d37 ("powerpc/8xx: Enable 8M hugepage support with HW assistance") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/778b1a248c4c7ca79640eeff7740044da6a220a0.1581264115.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit 723a44f2288e2e5075b0dab4a855f5dc28af7298 Author: Christophe Leroy Date: Thu Feb 6 13:50:28 2020 +0000 powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page size commit f2b67ef90b0d5eca0f2255e02cf2f620bc0ddcdb upstream. Commit 55c8fc3f4930 ("powerpc/8xx: reintroduce 16K pages with HW assistance") redefined pte_t as a struct of 4 pte_basic_t, because in 16K pages mode there are four identical entries in the page table. But the size of hugepage tables is calculated based of the size of (void *). Therefore, we end up with page tables of size 1k instead of 4k for 512k pages. As 512k hugepage tables are the same size as standard page tables, ie 4k, use the standard page tables instead of PGT_CACHE tables. Fixes: 3fb69c6a1a13 ("powerpc/8xx: Enable 512k hugepage support with HW assistance") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/90ec56a2315be602494619ed0223bba3b0b8d619.1580997007.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit 2ffeef3db3581f2ba904dad16d3ea97c3e21029e Author: Christophe Leroy Date: Tue Feb 18 14:09:29 2020 +0000 powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S commit 9eb425b2e04e0e3006adffea5bf5f227a896f128 upstream. Fixes: 12c3f1fd87bf ("powerpc/32s: get rid of CPU_FTR_601 feature") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/a99fc0ad65b87a1ba51cfa3e0e9034ee294c3e07.1582034961.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit 04e3f1d1e135c98b357b94e3a55a0dd9564d9d8c Author: Gustavo Luiz Duarte Date: Tue Feb 11 00:38:29 2020 -0300 powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery commit 2464cc4c345699adea52c7aef75707207cb8a2f6 upstream. After a treclaim, we expect to be in non-transactional state. If we don't clear the current thread's MSR[TS] before we get preempted, then tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in suspended transaction state. When handling a signal caught in transactional state, handle_rt_signal64() calls get_tm_stackpointer() that treclaims the transaction using tm_reclaim_current() but without clearing the thread's MSR[TS]. This can cause the TM Bad Thing exception below if later we pagefault and get preempted trying to access the user's sigframe, using __put_user(). Afterwards, when we are rescheduled back into do_page_fault() (but now in suspended state since the thread's MSR[TS] was not cleared), upon executing 'rfid' after completion of the page fault handling, the exception is raised because a transition from suspended to non-transactional state is invalid. Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32 NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000 REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2) MSR: 8000000302a03031 CR: 44000884 XER: 00000000 CFAR: c00000000000dda4 IRQMASK: 0 PACATMSCRATCH: 800000010280b033 GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78 GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0 GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000 GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140 GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800 GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000 NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0 LR [c000000000034728] handle_rt_signal64+0x78/0xc50 Call Trace: [c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable) [c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460 [c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088 60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989 ---[ end trace 93094aa44b442f87 ]--- The simplified sequence of events that triggers the above exception is: ... # userspace in NON-TRANSACTIONAL state tbegin # userspace in TRANSACTIONAL state signal delivery # kernelspace in SUSPENDED state handle_rt_signal64() get_tm_stackpointer() treclaim # kernelspace in NON-TRANSACTIONAL state __put_user() page fault happens. We will never get back here because of the TM Bad Thing exception. page fault handling kicks in and we voluntarily preempt ourselves do_page_fault() __schedule() __switch_to(other_task) our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared __switch_to(our_task) switch_to_tm() tm_recheckpoint_new_task() trechkpt # kernelspace in SUSPENDED state The page fault handling resumes, but now we are in suspended transaction state do_page_fault() completes rfid <----- trying to get back where the page fault happened (we were non-transactional back then) TM Bad Thing # illegal transition from suspended to non-transactional This patch fixes that issue by clearing the current thread's MSR[TS] just after treclaim in get_tm_stackpointer() so that we stay in non-transactional state in case we are preempted. In order to make treclaim and clearing the thread's MSR[TS] atomic from a preemption perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is used. It's also necessary to save the previous value of the thread's MSR before get_tm_stackpointer() is called so that it can be exposed to the signal handler later in setup_tm_sigcontexts() to inform the userspace MSR at the moment of the signal delivery. Found with tm-signal-context-force-tm kernel selftest. Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Gustavo Luiz Duarte Acked-by: Michael Neuling Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit a03b3cea86fdaf9a1cc57925e6dd9ddc28a6f4a5 Author: Sam Bobroff Date: Fri Feb 7 15:57:31 2020 +1100 powerpc/eeh: Fix deadlock handling dead PHB commit d4f194ed9eb9841a8f978710e4d24296f791a85b upstream. Recovering a dead PHB can currently cause a deadlock as the PCI rescan/remove lock is taken twice. This is caused as part of an existing bug in eeh_handle_special_event(). The pe is processed while traversing the PHBs even though the pe is unrelated to the loop. This causes the pe to be, incorrectly, processed more than once. Untangling this section can move the pe processing out of the loop and also outside the locked section, correcting both problems. Fixes: 2e25505147b8 ("powerpc/eeh: Fix crash when edev->pdev changes") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Sam Bobroff Reviewed-by: Frederic Barrat Tested-by: Frederic Barrat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/0547e82dbf90ee0729a2979a8cac5c91665c621f.1581051445.git.sbobroff@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit 9e1fab44502c55da348b38af527db14222b9d6f6 Author: Christophe Leroy Date: Sun Feb 9 18:14:42 2020 +0000 powerpc/8xx: Fix clearing of bits 20-23 in ITLB miss commit a4031afb9d10d97f4d0285844abbc0ab04245304 upstream. In ITLB miss handled the line supposed to clear bits 20-23 on the L2 ITLB entry is buggy and does indeed nothing, leading to undefined value which could allow execution when it shouldn't. Properly do the clearing with the relevant instruction. Fixes: 74fabcadfd43 ("powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Christophe Leroy Reviewed-by: Leonardo Bras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/4f70c2778163affce8508a210f65d140e84524b4.1581272050.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit 2558e71bbfc5e90eeb1821eaeef8b9ae5704feb8 Author: Boris Brezillon Date: Thu Feb 6 15:13:27 2020 +0100 drm/panfrost: perfcnt: Reserve/use the AS attached to the perfcnt MMU context commit dde2bb2da01e96c17f0a44b4a3cf72a30e66e3ef upstream. We need to use the AS attached to the opened FD when dumping counters. Reported-by: Antonio Caggiano Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Steven Price Tested-by: Antonio Caggiano Signed-off-by: Rob Herring Link: https://patchwork.freedesktop.org/patch/msgid/20200206141327.446127-1-boris.brezillon@collabora.com Signed-off-by: Greg Kroah-Hartman commit 3b8edaada13e08493161fa6e871a31152b5efb2b Author: Larry Finger Date: Mon Feb 10 12:02:33 2020 -0600 staging: rtl8723bs: Fix potential overuse of kernel memory commit 23954cb078febfc63a755301fe77e06bccdb4d2a upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver"). Reported by: Pietro Oliva Cc: Pietro Oliva Cc: Stable Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver"). Signed-off-by: Larry Finger Link: https://lore.kernel.org/r/20200210180235.21691-5-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman commit 4113e08e75d3d3c6e326ab799d116f95e3685bb7 Author: Larry Finger Date: Mon Feb 10 12:02:31 2020 -0600 staging: rtl8723bs: Fix potential security hole commit ac33597c0c0d1d819dccfe001bcd0acef7107e7c upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit 554c0a3abf216 ("0taging: Add rtl8723bs sdio wifi driver"). Reported by: Pietro Oliva Cc: Pietro Oliva Cc: Stable Fixes 554c0a3abf216 ("0taging: Add rtl8723bs sdio wifi driver"). Signed-off-by: Larry Finger Link: https://lore.kernel.org/r/20200210180235.21691-3-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman commit de63cd8b5521cbcbd4caf677212e5c0667960777 Author: Larry Finger Date: Mon Feb 10 12:02:32 2020 -0600 staging: rtl8188eu: Fix potential overuse of kernel memory commit 4ddf8ab8d15ddbc52eefb44eb64e38466ce1f70f upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit a2c60d42d97c ("Add files for new driver - part 16"). Reported by: Pietro Oliva Cc: Pietro Oliva Cc: Stable Fixes commit a2c60d42d97c ("Add files for new driver - part 16"). Signed-off-by: Larry Finger Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman commit ddedb84fcdc846cf636d7352065fe75e8610c3e3 Author: Larry Finger Date: Mon Feb 10 12:02:30 2020 -0600 staging: rtl8188eu: Fix potential security hole commit 499c405b2b80bb3a04425ba3541d20305e014d3e upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit a2c60d42d97c ("Add files for new driver - part 16"). Reported by: Pietro Oliva Cc: Pietro Oliva Cc: Stable Fixes: a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by: Larry Finger Link: https://lore.kernel.org/r/20200210180235.21691-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman commit 91aa9e475827c5cd5f0283f3f68c7805882823fe Author: Bart Van Assche Date: Sun Feb 9 21:12:02 2020 -0800 scsi: Revert "target/core: Inline transport_lun_remove_cmd()" commit c14335ebb92a98646ddbf447e6cacc66de5269ad upstream. Commit 83f85b8ec305 postponed the percpu_ref_put(&se_cmd->se_lun->lun_ref) call from command completion to the time when the final command reference is dropped. That approach is not compatible with the iSCSI target driver because the iSCSI target driver keeps the command with the highest stat_sn after it has completed until the next command is received (see also iscsit_ack_from_expstatsn()). Fix this regression by reverting commit 83f85b8ec305. Fixes: 83f85b8ec305 ("scsi: target/core: Inline transport_lun_remove_cmd()") Cc: Pavel Zakharov Cc: Mike Christie Cc: Link: https://lore.kernel.org/r/20200210051202.12934-1-bvanassche@acm.org Reported-by: Pavel Zakharov Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 24aeb16934e8fe02ec1ad9a5975d7a4245bce46d Author: Colin Ian King Date: Mon Feb 10 09:51:39 2020 +0000 usb: dwc3: debug: fix string position formatting mixup with ret and len commit b32196e35bd7bbc8038db1aba1fbf022dc469b6a upstream. Currently the string formatting is mixing up the offset of ret and len. Re-work the code to use just len, remove ret and use scnprintf instead of snprintf and len position accumulation where required. Remove the -ve return check since scnprintf never returns a failure -ve size. Also break overly long lines to clean up checkpatch warnings. Addresses-Coverity: ("Unused value") Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat") Signed-off-by: Colin Ian King Reviewed-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20200210095139.328711-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman commit 6dbf3ea0f56637e35bdad7605a6ef0fbb76863dc Author: Anurag Kumar Vulisha Date: Mon Jan 27 19:30:46 2020 +0000 usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields commit 5ee858975b13a9b40db00f456989a689fdbb296c upstream. The current code in dwc3_gadget_ep_reclaim_completed_trb() will check for IOC/LST bit in the event->status and returns if IOC/LST bit is set. This logic doesn't work if multiple TRBs are queued per request and the IOC/LST bit is set on the last TRB of that request. Consider an example where a queued request has multiple queued TRBs and IOC/LST bit is set only for the last TRB. In this case, the core generates XferComplete/XferInProgress events only for the last TRB (since IOC/LST are set only for the last TRB). As per the logic in dwc3_gadget_ep_reclaim_completed_trb() event->status is checked for IOC/LST bit and returns on the first TRB. This leaves the remaining TRBs left unhandled. Similarly, if the gadget function enqueues an unaligned request with sglist already in it, it should fail the same way, since we will append another TRB to something that already uses more than one TRB. To aviod this, this patch changes the code to check for IOC/LST bits in TRB->ctrl instead. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based HiKey960 after functionfs gadget added scatter-gather support around v4.20. Cc: Felipe Balbi Cc: Yang Fei Cc: Thinh Nguyen Cc: Tejas Joglekar Cc: Andrzej Pietrasiewicz Cc: Jack Pham Cc: Todd Kjos Cc: Greg KH Cc: Linux USB List Cc: stable Tested-by: Tejas Joglekar Reviewed-by: Thinh Nguyen Signed-off-by: Anurag Kumar Vulisha [jstultz: forward ported to mainline, reworded commit log, reworked to only check trb->ctrl as suggested by Felipe] Signed-off-by: John Stultz Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 256cc85f6f86928883418a23dc323e74508e6da1 Author: Minas Harutyunyan Date: Tue Jan 21 14:17:07 2020 +0400 usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows commit 9a0d6f7c0a83844baae1d6d85482863d2bf3b7a7 upstream. SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly. GET_STATUS handling provided not correct data on DATA Stage. Issue seen when gadget's dr_mode set to "otg" mode and connected to MacOS. Both are fixed and tested using USBCV Ch.9 tests. Signed-off-by: Minas Harutyunyan Fixes: fa389a6d7726 ("usb: dwc2: gadget: Add remote_wakeup_allowed flag") Tested-by: Jack Mitchell Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit c2f07cb7e317d295bda11b10673e176a18958540 Author: Hardik Gajjar Date: Thu Feb 6 12:49:23 2020 +0100 USB: hub: Fix the broken detection of USB3 device in SMSC hub commit 1208f9e1d758c991b0a46a1bd60c616b906bbe27 upstream. Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able to detect the USB3.0 mass storage devices or is detecting those as USB2.0 high speed devices. The explanation given by Renesas is that, due to a HW issue, the XHCI driver does not wake up after going to sleep on connecting a USB3.0 device. In order to mitigate that, disable the auto-suspend feature specifically for SMSC hubs from hub_probe() function, as a quirk. Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, configurable hub controller. [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.077303] usb 5-1.1: Product: Ultra [ 74.080980] usb 5-1.1: Manufacturer: SanDisk [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550 [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.604430] usb 6-1.1: Product: Ultra [ 34.608110] usb 6-1.1: Manufacturer: SanDisk [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550 Suggested-by: Alan Stern Signed-off-by: Hardik Gajjar Acked-by: Alan Stern Tested-by: Eugeniu Rosca Cc: stable Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman commit e5d078af8e5fb0896706af855f52e9c0c69627b1 Author: Alan Stern Date: Fri Jan 31 10:39:26 2020 -0500 USB: hub: Don't record a connect-change event during reset-resume commit 8099f58f1ecddf4f374f4828a3dff8397c7cbd74 upstream. Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else. Such a request was added by commit a4f55d8b8c14 ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports). The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed. Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably. The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened. One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does. (Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.) Reported-and-tested-by: Paul Zimmerman Signed-off-by: Alan Stern Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman commit 5af8add0167cf03e5b5fb6ba86e6d40a3dae74a4 Author: Richard Dodd Date: Wed Feb 12 14:22:18 2020 +0000 USB: Fix novation SourceControl XL after suspend commit b692056db8ecc7f452b934f016c17348282b7699 upstream. Currently, the SourceControl will stay in power-down mode after resuming from suspend. This patch resets the device after suspend to power it up. Signed-off-by: Richard Dodd Cc: stable Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.com Signed-off-by: Greg Kroah-Hartman commit b3c64c8b2fab3fd94bf05955ba03634fbb1cf5ae Author: EJ Hsu Date: Thu Jan 30 01:25:06 2020 -0800 usb: uas: fix a plug & unplug racing commit 3e99862c05a9caa5a27969f41566b428696f5a9a upstream. When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by: EJ Hsu Acked-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman commit e805982b13e3e3be3eb802fe4b5d07967a7e0a99 Author: Johan Hovold Date: Mon Feb 3 16:38:29 2020 +0100 USB: quirks: blacklist duplicate ep on Sound Devices USBPre2 commit bdd1b147b8026df0e4260b387026b251d888ed01 upstream. This device has a broken vendor-specific altsetting for interface 1, where endpoint 0x85 is declared as an isochronous endpoint despite being used by interface 2 for audio capture. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0926 idProduct 0x0202 bcdDevice 1.00 iManufacturer 1 Sound Devices iProduct 2 USBPre2 iSerial 3 [...] bNumConfigurations 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 24000 tSamFreq[ 3] 32000 tSamFreq[ 4] 44100 tSamFreq[ 5] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing, but in this case we need to ignore the first instance in order to avoid breaking the audio capture interface. Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Cc: stable Reported-by: edes Tested-by: edes Link: https://lore.kernel.org/r/20200201105829.5682c887@acme7.acmenet Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200203153830.26394-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 4c02497e8f653b69bd144416226b95329b02596b Author: Johan Hovold Date: Mon Feb 3 16:38:28 2020 +0100 USB: core: add endpoint-blacklist quirk commit 73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream. Add a new device quirk that can be used to blacklist endpoints. Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing. In order to handle devices where the first interfaces with duplicate endpoints are the ones that should have their endpoints ignored, we need to add a blacklist. Tested-by: edes Cc: stable Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit f9965af8e49389d4b8de849894ed6e5b5959e028 Author: Peter Chen Date: Fri Nov 15 18:50:00 2019 +0200 usb: host: xhci: update event ring dequeue pointer on purpose commit dc0ffbea5729a3abafa577ebfce87f18b79e294b upstream. On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman commit 5d0faf16f9607e3cbe003cef5ddab796480efa8e Author: Mathias Nyman Date: Tue Feb 11 17:01:58 2020 +0200 xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2 commit cf0ee7c60c89641f6e4d1d3c7867fe32b9e30300 upstream. xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel Reported-by: Sajja Venkateswara Rao Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable # v4.4+ Signed-off-by: Mathias Nyman Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit ef69cf19bda8c8046a71cd16c49c32264999ddc5 Author: Mathias Nyman Date: Mon Feb 10 15:45:53 2020 +0200 xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms commit a3ae87dce3a5abe0b57c811bab02b2564b574106 upstream. Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 02e3263600534bead73d364bfa9fe5158d9a7f6a Author: Mathias Nyman Date: Mon Feb 10 15:45:52 2020 +0200 xhci: fix runtime pm enabling for quirky Intel hosts commit 024d411e9c5d49eb96c825af52a3ce2682895676 upstream. Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33b986 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: # 4.13+ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 512dae7753cdb0d8a94cf72776c036a71bba583b Author: Mathias Nyman Date: Mon Feb 10 15:45:50 2020 +0200 xhci: Force Maximum Packet size for Full-speed bulk devices to valid range. commit f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 22ff13ac65cba4ee2a208d7021e7b69fc9ca111c Author: Malcolm Priestley Date: Tue Feb 4 19:34:02 2020 +0000 staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi. commit 93134df520f23f4e9998c425b8987edca7016817 upstream. bb_pre_ed_rssi is an u8 rx_dm always returns negative signed values add minus operator to always yield positive. fixes issue where rx sensitivity is always set to maximum because the unsigned numbers were always greater then 100. Fixes: 63b9907f58f1 ("staging: vt6656: mac80211 conversion: create rx function.") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/aceac98c-6e69-3ce1-dfec-2bf27b980221@gmail.com Signed-off-by: Greg Kroah-Hartman commit 41a53f5b68ec36bcd100816554c31e3cff7b6c6e Author: Suren Baghdasaryan Date: Mon Jan 27 15:56:16 2020 -0800 staging: android: ashmem: Disallow ashmem memory from being remapped commit 6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by: Jann Horn Signed-off-by: Suren Baghdasaryan Cc: stable # 4.4,4.9,4.14,4.18,5.4 Signed-off-by: Todd Kjos Reviewed-by: Joel Fernandes (Google) Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman commit 897d5aaf3397e64a56274f2176d9e1b13adcb92e Author: Eric Dumazet Date: Mon Feb 10 11:07:21 2020 -0800 vt: vt_ioctl: fix race in VT_RESIZEX commit 6cd1ed50efd88261298577cd92a14f2768eddeeb upstream. We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash. general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Cc: stable Reported-by: syzbot Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman commit 21275a431289a6b29996771063cec0ce4bcc3885 Author: Jiri Slaby Date: Mon Feb 10 09:11:30 2020 +0100 vt: selection, handle pending signals in paste_selection commit 687bff0cd08f790d540cfb7b2349f0d876cdddec upstream. When pasting a selection to a vt, the task is set as INTERRUPTIBLE while waiting for a tty to unthrottle. But signals are not handled at all. Normally, this is not a problem as tty_ldisc_receive_buf receives all the goods and a user has no reason to interrupt the task. There are two scenarios where this matters: 1) when the tty is throttled and a signal is sent to the process, it spins on a CPU until the tty is unthrottled. schedule() does not really echedule, but returns immediately, of course. 2) when the sel_buffer becomes invalid, KASAN prevents any reads from it and the loop simply does not proceed and spins forever (causing the tty to throttle, but the code never sleeps, the same as above). This sometimes happens as there is a race in the sel_buffer handling code. So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR in case a signal is pending. Signed-off-by: Jiri Slaby Cc: stable Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman commit a2c3858faf3a9f9217041d52ff761642878264c2 Author: Nicolas Pitre Date: Tue Jan 28 12:50:33 2020 -0500 vt: fix scrollback flushing on background consoles commit 3f4ef485be9d54040b695f32ec76d0f1ea50bbf3 upstream. Commit a6dbe4427559 ("vt: perform safe console erase in the right order") provided fixes to an earlier commit by gathering all console scrollback flushing operations in a function of its own. This includes the invocation of vc_sw->con_switch() as previously done through a update_screen() call. That commit failed to carry over the con_is_visible() conditional though, as well as cursor handling, which caused problems when "\e[3J" was written to a background console. One could argue for preserving the call to update_screen(). However this does far more than we need, and it is best to remove scrollback assumptions from it. Instead let's gather the minimum needed to actually perform scrollback flushing properly in that one place. While at it, let's document the vc_sw->con_switch() side effect being relied upon. Signed-off-by: Nicolas Pitre Reported-and-tested-by: Lukas Wunner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman commit 1eb78bc92c847f9e1c01a01b2773fc2fe7b134cf Author: Linus Torvalds Date: Fri Feb 21 12:43:35 2020 -0800 floppy: check FDC index for errors before assigning it commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer Cc: Willy Tarreau Cc: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c5455e3fab200503e7e37772183ad7d5284e87bd Author: Alexander Duyck Date: Fri Oct 11 08:34:52 2019 -0700 e1000e: Use rtnl_lock to prevent race conditions between net and pci/pm commit a7023819404ac9bd2bb311a4fafd38515cfa71ec upstream. This patch is meant to address possible race conditions that can exist between network configuration and power management. A similar issue was fixed for igb in commit 9474933caf21 ("igb: close/suspend race in netif_device_detach"). In addition it consolidates the code so that the PCI error handling code will essentially perform the power management freeze on the device prior to attempting a reset, and will thaw the device afterwards if that is what it is planning to do. Otherwise when we call close on the interface it should see it is detached and not attempt to call the logic to down the interface and free the IRQs again. From what I can tell the check that was adding the check for __E1000_DOWN in e1000e_close was added when runtime power management was added. However it should not be relevant for us as we perform a call to pm_runtime_get_sync before we call e1000_down/free_irq so it should always be back up before we call into this anyway. Reported-by: Morumuri Srivalli Signed-off-by: Alexander Duyck Tested-by: David Dai Tested-by: Aaron Brown Cc: Kai-Heng Feng Signed-off-by: Greg Kroah-Hartman commit 47a7a44650c13b13bf47fc3a9b9e85fc85f5eaa4 Author: Greg Kroah-Hartman Date: Fri Feb 14 08:11:48 2020 -0800 USB: misc: iowarrior: add support for the 100 device commit bab5417f5f0118ce914bc5b2f8381e959e891155 upstream. Add a new device id for the 100 devie. It has 4 interfaces like the 28 and 28L devices but a larger endpoint so more I/O pins. Cc: Christoph Jung Cc: stable Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com Signed-off-by: Greg Kroah-Hartman commit 9b5e87086fa9e539713bab2233c3be9bc89e6061 Author: Greg Kroah-Hartman Date: Tue Feb 11 20:04:22 2020 -0800 USB: misc: iowarrior: add support for the 28 and 28L devices commit 5f6f8da2d7b5a431d3f391d0d73ace8edfb42af7 upstream. Add new device ids for the 28 and 28L devices. These have 4 interfaces instead of 2, but the driver binds the same, so the driver changes are minimal. Cc: Christoph Jung Cc: stable Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit c8e28d325c97fa2143cdcac1f392598e068cfc7b Author: Greg Kroah-Hartman Date: Tue Feb 11 20:04:21 2020 -0800 USB: misc: iowarrior: add support for 2 OEMed devices commit 461d8deb26a7d70254bc0391feb4fd8a95e674e8 upstream. Add support for two OEM devices that are identical to existing IO-Warrior devices, except for the USB device id. Cc: Christoph Jung Cc: stable Link: https://lore.kernel.org/r/20200212040422.2991-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit cfda8551dd599685d25aaee8be2ff604d77c0008 Author: Mika Westerberg Date: Thu Feb 13 12:56:04 2020 +0300 thunderbolt: Prevent crash if non-active NVMem file is read commit 03cd45d2e219301880cabc357e3cf478a500080f upstream. The driver does not populate .reg_read callback for the non-active NVMem because the file is supposed to be write-only. However, it turns out NVMem subsystem does not yet support this and expects that the .reg_read callback is provided. If user reads the binary attribute it triggers NULL pointer dereference like this one: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: bin_attr_nvmem_read+0x64/0x80 kernfs_fop_read+0xa7/0x180 vfs_read+0xbd/0x170 ksys_read+0x5a/0xd0 do_syscall_64+0x43/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this in the driver by providing .reg_read callback that always returns an error. Reported-by: Nicholas Johnson Fixes: e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade") Signed-off-by: Mika Westerberg Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 802a8369d21fe88e6709bdc8b3c16d3b02430a87 Author: Josef Bacik Date: Thu Feb 13 10:47:30 2020 -0500 btrfs: handle logged extent failure properly commit bd727173e4432fe6cb70ba108dc1f3602c5409d7 upstream. If we're allocating a logged extent we attempt to insert an extent record for the file extent directly. We increase space_info->bytes_reserved, because the extent entry addition will call btrfs_update_block_group(), which will convert the ->bytes_reserved to ->bytes_used. However if we fail at any point while inserting the extent entry we will bail and leave space on ->bytes_reserved, which will trigger a WARN_ON() on umount. Fix this by pinning the space if we fail to insert, which is what happens in every other failure case that involves adding the extent entry. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Johannes Thumshirn Reviewed-by: Nikolay Borisov Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 3c4ef8ac8f4b9fafc2aa29f6f6adeda12a18783e Author: Wenwen Wang Date: Tue Aug 20 00:33:54 2019 -0500 ecryptfs: fix a memory leak bug in ecryptfs_init_messaging() commit b4a81b87a4cfe2bb26a4a943b748d96a43ef20e8 upstream. In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr' fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated, leading to a memory leak bug. To fix this issue, free 'ecryptfs_daemon_hash' before returning the error. Cc: stable@vger.kernel.org Fixes: 88b4a07e6610 ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by: Wenwen Wang Signed-off-by: Tyler Hicks Signed-off-by: Greg Kroah-Hartman commit 7e1dbc6656ffebf48fb3b521fc4836d716d8d5cc Author: Wenwen Wang Date: Tue Aug 20 00:16:40 2019 -0500 ecryptfs: fix a memory leak bug in parse_tag_1_packet() commit fe2e082f5da5b4a0a92ae32978f81507ef37ec66 upstream. In parse_tag_1_packet(), if tag 1 packet contains a key larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to the label 'out_free' to perform the cleanup work. Cc: stable@vger.kernel.org Fixes: dddfa461fc89 ("[PATCH] eCryptfs: Public key; packet management") Signed-off-by: Wenwen Wang Signed-off-by: Tyler Hicks Signed-off-by: Greg Kroah-Hartman commit 909149bf61da3d69a3091bc7775e046e9b73b8e3 Author: Roberto Sassu Date: Mon Feb 10 11:00:41 2020 +0100 tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST commit dc10e4181c05a2315ddc375e963b7c763b5ee0df upstream. chip->allocated_banks, an array of tpm_bank_info structures, contains the list of TPM algorithm IDs of allocated PCR banks. It also contains the corresponding ID of the crypto subsystem, so that users of the TPM driver can calculate a digest for a PCR extend operation. However, if there is no mapping between TPM algorithm ID and crypto ID, the crypto_id field of tpm_bank_info remains set to zero (the array is allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()). Zero should not be used as value for unknown mappings, as it is a valid crypto ID (HASH_ALGO_MD4). Thus, initialize crypto_id to HASH_ALGO__LAST. Cc: stable@vger.kernel.org # 5.1.x Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Signed-off-by: Roberto Sassu Reviewed-by: Petr Vorel Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 9f83363875bee35c692f4de77f5b13ff1de2cf42 Author: Samuel Holland Date: Mon Feb 17 00:42:22 2020 -0600 ASoC: sun8i-codec: Fix setting DAI data format commit 96781fd941b39e1f78098009344ebcd7af861c67 upstream. Use the correct mask for this two-bit field. This fixes setting the DAI data format to RIGHT_J or DSP_A. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Signed-off-by: Samuel Holland Acked-by: Chen-Yu Tsai Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 3de0bbe21312f0f7582f1051a8b0169272a04146 Author: Samuel Holland Date: Thu Feb 13 00:11:44 2020 -0600 ASoC: codec2codec: avoid invalid/double-free of pcm runtime commit b6570fdb96edf45bcf71884bd2644bd73d348d1a upstream. The PCM runtime was freed during PMU in the case that the event hook encountered an error. However, it is also unconditionally freed during PMD. Avoid a double-free by dropping the call to kfree in the PMU hook. Fixes: a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables") Cc: stable@vger.kernel.org Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c45877ca9f626b784cca1de0f836604f78ca43eb Author: Takashi Iwai Date: Tue Feb 18 09:09:15 2020 +0100 ALSA: hda/realtek - Apply quirk for yet another MSI laptop commit cc5049ae4d457194796f854eb2e38b9727ad8c2d upstream. MSI GP65 laptop with SSID 1462:1293 requires the same quirk as other MSI models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159 Cc: Link: https://lore.kernel.org/r/20200218080915.3433-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 9dc3b7a5833a3d312d8fdde02a86665d6b685639 Author: Takashi Iwai Date: Mon Feb 17 16:19:47 2020 +0100 ALSA: hda/realtek - Apply quirk for MSI GP63, too commit a655e2b107d463ce2745188ce050d07daed09a71 upstream. The same quirk that was applied to MSI GL73 is needed for MSI GP63, too. Adding the entry with the SSID 1462:1228. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206503 Cc: Link: https://lore.kernel.org/r/20200217151947.17528-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 80c1e9c4c4846187876d4a9f9467601a37571fa7 Author: Takashi Iwai Date: Tue Feb 18 10:14:09 2020 +0100 ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs commit 44eeb081b8630bb3ad3cd381d1ae1831463e48bb upstream. Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow. Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf(). Cc: Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit b76e00b67dc61d5bbd0cc21f51d14703c767510d Author: Robin Murphy Date: Tue Feb 18 18:12:41 2020 +0000 iommu/qcom: Fix bogus detach logic commit faf305c51aeabd1ea2d7131e798ef5f55f4a7750 upstream. Currently, the implementation of qcom_iommu_domain_free() is guaranteed to do one of two things: WARN() and leak everything, or dereference NULL and crash. That alone is terrible, but in fact the whole idea of trying to track the liveness of a domain via the qcom_domain->iommu pointer as a sanity check is full of fundamentally flawed assumptions. Make things robust and actually functional by not trying to be quite so clever. Reported-by: Brian Masney Tested-by: Brian Masney Reported-by: Naresh Kamboju Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: Robin Murphy Tested-by: Stephan Gerhold Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman