patch-2.3.99-pre1 linux/drivers/block/umc8672.c

Next file: linux/drivers/block/via82cxxx.c
Previous file: linux/drivers/block/trm290.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.51/linux/drivers/block/umc8672.c linux/drivers/block/umc8672.c
@@ -1,159 +0,0 @@
-/*
- *  linux/drivers/block/umc8672.c		Version 0.05	Jul 31, 1996
- *
- *  Copyright (C) 1995-1996  Linus Torvalds & author (see below)
- */
-
-/*
- *  Principal Author/Maintainer:  PODIEN@hml2.atlas.de (Wolfram Podien)
- *
- *  This file provides support for the advanced features
- *  of the UMC 8672 IDE interface.
- *
- *  Version 0.01	Initial version, hacked out of ide.c,
- *			and #include'd rather than compiled separately.
- *			This will get cleaned up in a subsequent release.
- *
- *  Version 0.02	now configs/compiles separate from ide.c  -ml
- *  Version 0.03	enhanced auto-tune, fix display bug
- *  Version 0.05	replace sti() with restore_flags()  -ml
- *			add detection of possible race condition  -ml
- */
-
-/*
- * VLB Controller Support from 
- * Wolfram Podien
- * Rohoefe 3
- * D28832 Achim
- * Germany
- *
- * To enable UMC8672 support there must a lilo line like
- * append="ide0=umc8672"...
- * To set the speed according to the abilities of the hardware there must be a
- * line like
- * #define UMC_DRIVE0 11
- * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
- * are some lines present). 0 - 11 are allowed speed values. These values are
- * the results from the DOS speed test program supplied from UMC. 11 is the 
- * highest speed (about PIO mode 3)
- */
-#define REALLY_SLOW_IO		/* some systems can safely undef this */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#include "ide_modes.h"
-
-/*
- * Default speeds.  These can be changed with "auto-tune" and/or hdparm.
- */
-#define UMC_DRIVE0      1              /* DOS measured drive speeds */
-#define UMC_DRIVE1      1              /* 0 to 11 allowed */
-#define UMC_DRIVE2      1              /* 11 = Fastest Speed */
-#define UMC_DRIVE3      1              /* In case of crash reduce speed */
-
-static byte current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
-static const byte pio_to_umc [5] = {0,3,7,10,11};	/* rough guesses */
-
-/*       0    1    2    3    4    5    6    7    8    9    10   11      */
-static const byte speedtab [3][12] = {
-	{0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
-	{0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
-	{0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}};
-
-static void out_umc (char port,char wert)
-{
-	outb_p (port,0x108);
-	outb_p (wert,0x109);
-}
-
-static inline byte in_umc (char port)
-{
-	outb_p (port,0x108);
-	return inb_p (0x109);
-}
-
-static void umc_set_speeds (byte speeds[])
-{
-	int i, tmp;
-
-	outb_p (0x5A,0x108); /* enable umc */
-
-	out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
-	out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
-	tmp = 0;
-	for (i = 3; i >= 0; i--)
-	{
-		tmp = (tmp << 2) | speedtab[1][speeds[i]];
-	}
-	out_umc (0xdc,tmp);
-	for (i = 0;i < 4; i++)
-	{
-		out_umc (0xd0+i,speedtab[2][speeds[i]]);
-		out_umc (0xd8+i,speedtab[2][speeds[i]]);
-	}
-	outb_p (0xa5,0x108); /* disable umc */
-
-	printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
-		speeds[0], speeds[1], speeds[2], speeds[3]);
-}
-
-static void tune_umc (ide_drive_t *drive, byte pio)
-{
-	unsigned long flags;
-	ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
-
-	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
-	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]);
-	save_flags(flags);	/* all CPUs */
-	cli();			/* all CPUs */
-	if (hwgroup && hwgroup->handler != NULL) {
-		printk("umc8672: other interface is busy: exiting tune_umc()\n");
-	} else {
-		current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
-		umc_set_speeds (current_speeds);
-	}
-	restore_flags(flags);	/* all CPUs */
-}
-
-void __init init_umc8672 (void)	/* called from ide.c */
-{
-	unsigned long flags;
-
-	__save_flags(flags);	/* local CPU only */
-	__cli();		/* local CPU only */
-	if (check_region(0x108, 2)) {
-		__restore_flags(flags);
-		printk("\numc8672: PORTS 0x108-0x109 ALREADY IN USE\n");
-		return;
-	}
-	outb_p (0x5A,0x108); /* enable umc */
-	if (in_umc (0xd5) != 0xa0)
-	{
-		__restore_flags(flags);	/* local CPU only */
-		printk ("umc8672: not found\n");
-		return;  
-	}
-	outb_p (0xa5,0x108); /* disable umc */
-
-	umc_set_speeds (current_speeds);
-	__restore_flags(flags);	/* local CPU only */
-
-	request_region(0x108, 2, "umc8672");
-	ide_hwifs[0].chipset = ide_umc8672;
-	ide_hwifs[1].chipset = ide_umc8672;
-	ide_hwifs[0].tuneproc = &tune_umc;
-	ide_hwifs[1].tuneproc = &tune_umc;
-	ide_hwifs[0].mate = &ide_hwifs[1];
-	ide_hwifs[1].mate = &ide_hwifs[0];
-	ide_hwifs[1].channel = 1;
-}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)