patch-2.3.51 linux/drivers/sound/lowlevel/Config.in

Next file: linux/drivers/sound/lowlevel/Makefile
Previous file: linux/drivers/sound/dev_table.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.50/linux/drivers/sound/lowlevel/Config.in linux/drivers/sound/lowlevel/Config.in
@@ -1,66 +0,0 @@
-dep_tristate '  ACI mixer (miroPCM12)' CONFIG_ACI_MIXER $CONFIG_SOUND_OSS
-
-dep_tristate '  AWE32 synth' CONFIG_AWE32_SYNTH $CONFIG_SOUND_OSS
-
-if [ "$CONFIG_AWE32_SYNTH" = "y" -o "$CONFIG_AWE32_SYNTH" = "m" ]; then
-   comment 'AWE32 PnP-ISA Cards are not always setup correctly'
-   bool 'Configure AWE32 synth Base Address and Default Memory Size' CONFIG_AWE32_SYNTH_DEFAULTS
-   if [ "$CONFIG_AWE32_SYNTH_DEFAULTS" = "y" ]; then
-      hex 'AWE32 synth Base Address 620' AWE_DEFAULT_BASE_ADDR 620
-      int 'AWE32 synth Default Memory Size 512 1024 or 4096' AWE_DEFAULT_MEM_SIZE 512
-   fi
-fi
-
-if [ "$CONFIG_SOUND_OSS" = "y" -o "$CONFIG_SOUND" = "m" ]; then
-   dep_tristate '  Gallant Audio Cards (SC-6000 and SC-6600 based)' CONFIG_AEDSP16 $CONFIG_SOUND_OSS
-   if [ "$CONFIG_AEDSP16" = "y" -o "$CONFIG_AEDSP16" = "m" ]; then
-      hex 'I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-      hex 'I/O base for MPU401 Check from manual of the card' CONFIG_MPU_BASE 330
-   fi
-
-   if [ "$CONFIG_AEDSP16" = "y" -o "$CONFIG_AEDSP16" = "m" ]; then
-      comment 'SC-6600 Audio Cards have no jumper switches at all'
-      bool '    SC-6600 based audio cards (new Audio Excel DSP 16)' CONFIG_SC6600
-      if [ "$CONFIG_SC6600" = "y" ]; then
-	 comment 'SC-6600 specific configuration'
-	 bool '      Activate SC-6600 Joystick Interface' CONFIG_SC6600_JOY
-	 int 'SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)' CONFIG_SC6600_CDROM 4
-	 hex 'SC-6600 CDROM Interface I/O Address' CONFIG_SC6600_CDROMBASE 0
-      fi
-
-      if [ "$CONFIG_SOUND_SB" = "y" -o "$CONFIG_SOUND_SB" = "m" ]; then
-	 if [ "$CONFIG_AEDSP16_MSS" != "y" ]; then
-	    bool 'Audio Excel DSP 16 (SBPro emulation)' CONFIG_AEDSP16_SBPRO
-	    if [ "$CONFIG_AEDSP16_SBPRO" = "y" ]; then
-	       comment 'Audio Excel DSP 16 [Sound Blaster Pro]'
-	       hex 'I/O base for Audio Excel DSP 16 220, 240' CONFIG_AEDSP16_BASE $CONFIG_SB_BASE 220
-	       int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' CONFIG_AEDSP16_SB_IRQ $CONFIG_SB_IRQ 5
-	       int 'Audio Excel DSP 16 DMA 0, 1 or 3' CONFIG_AEDSP16_SB_DMA $CONFIG_SB_DMA 0
-	    fi
-	 fi
-      fi
-
-      if [ "$CONFIG_SOUND_MSS" = "y" -o "$CONFIG_SOUND_MSS" = "m" ]; then
-	 if [ "$CONFIG_AEDSP16_SBPRO" != "y" ]; then
-	    bool '    Audio Excel DSP 16 (MSS emulation)' CONFIG_AEDSP16_MSS
-	    if [ "$CONFIG_AEDSP16_MSS" = "y" ]; then
-	       comment 'Audio Excel DSP 16 [Microsoft Sound System]'
-	       hex 'I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-	       int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' CONFIG_AEDSP16_MSS_IRQ $CONFIG_MSS_IRQ 5
-	       int 'Audio Excel DSP 16 DMA 0, 1 or 3' CONFIG_AEDSP16_MSS_DMA $CONFIG_MSS_DMA 1
-	    fi
-	 fi
-      fi
-
-      if [ "$CONFIG_SOUND_MPU401" = "y" -o "$CONFIG_SOUND_MPU401" = "m" ]; then
-	 bool 'Audio Excel DSP 16 (MPU401 emulation)' CONFIG_AEDSP16_MPU401
-	 if [ "$CONFIG_AEDSP16_MPU401" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [MPU-401]'
-	    if [ "$CONFIG_AEDSP16_SBPRO" != "y" -a "$CONFIG_AEDSP16_MSS" != "y" ]; then
-	       hex 'I/O base for Audio Excel DSP 16 220 or 240' CONFIG_AEDSP16_BASE 220
-	    fi
-	    int 'MPU401 IRQ for Audio Excel DSP 16 5, 7, 9, 10 or 0 (disable)' CONFIG_AEDSP16_MPU_IRQ $CONFIG_MPU_IRQ
-	 fi
-      fi
-   fi
-fi

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)