patch-2.3.27 linux/drivers/scsi/mac_scsi.c
Next file: linux/drivers/scsi/mac_scsi.h
Previous file: linux/drivers/scsi/mac_esp.h
Back to the patch index
Back to the overall index
- Lines: 1557
- Date:
Thu Nov 11 16:57:30 1999
- Orig file:
v2.3.26/linux/drivers/scsi/mac_scsi.c
- Orig date:
Wed Aug 18 10:00:52 1999
diff -u --recursive --new-file v2.3.26/linux/drivers/scsi/mac_scsi.c linux/drivers/scsi/mac_scsi.c
@@ -1,95 +1,104 @@
/*
- * mac_scsi.c -- Device dependent functions for the Macintosh NCR5380 SCSI
- * port (MacII style machines, no DMA).
+ * Generic Macintosh NCR5380 driver
*
- * based on:
+ * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
+ *
+ * derived in part from:
*/
-
/*
- * atari_scsi.c -- Device dependent functions for the Atari generic SCSI port
+ * Generic Generic NCR5380 driver
+ *
+ * Copyright 1995, Russell King
*
- * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
+ * ALPHA RELEASE 1.
*
- * Loosely based on the work of Robert De Vries' team and added:
- * - working real DMA
- * - Falcon support (untested yet!) ++bjoern fixed and now it works
- * - lots of extensions and bug fixes.
+ * For more information, please consult
*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
+ * NCR 5380 Family
+ * SCSI Protocol Controller
+ * Databook
*
+ * NCR Microelectronics
+ * 1635 Aeroplaza Drive
+ * Colorado Springs, CO 80916
+ * 1+ (719) 578-3400
+ * 1+ (800) 334-5454
*/
-#include <linux/config.h>
-#include <linux/module.h>
-
-#define NDEBUG_ABORT 0x800000
-#define NDEBUG_TAGS 0x1000000
-#define NDEBUG_MERGING 0x2000000
-
-#define NDEBUG (0)
-
-#define AUTOSENSE
-/* MSch: Tested the pseudo-DMA code on Atari for the Mac68k port ... */
-/* Defining neither PSEUDO_DMA nor REAL_DMA -> PIO transfer, sloooow ! */
-/*#define REAL_DMA*/ /* never supported on NCR5380 Macs */
/*
- * Usage: define PSEUDO_DMA to use hardware-handshaked PIO mode (TBI)
- * undef PSEUDO_DMA to use pure PIO mode
+ * Options :
+ *
+ * PARITY - enable parity checking. Not supported.
+ *
+ * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
+ *
+ * USLEEP - enable support for devices that don't disconnect. Untested.
*/
-/*#define PSEUDO_DMA*/ /* currently gives trouble on some Macs */
+/*
+ * $Log: mac_NCR5380.c,v $
+ */
-#ifdef PSEUDO_DMA
-#define EMULATE_PSEUDO_DMA
-#define DMA_WORKS_RIGHT
-#define UNSAFE
+#define AUTOSENSE
+#if 0
+#define PSEUDO_DMA
#endif
-/* Support tagged queuing? (on devices that are able to... :-) */
-#define SUPPORT_TAGS
-#define MAX_TAGS 32
-
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/ctype.h>
#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/blk.h>
+
+#include <linux/module.h>
+#include <linux/signal.h>
#include <linux/sched.h>
-#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/blk.h>
-#include <asm/setup.h>
-#include <asm/machw.h>
-#include <asm/macints.h>
-#include <asm/macintosh.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
+#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/bitops.h>
+#include <asm/system.h>
+
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/machw.h>
+#include <asm/mac_via.h>
#include "scsi.h"
#include "hosts.h"
#include "mac_scsi.h"
#include "NCR5380.h"
#include "constants.h"
-#include <asm/io.h>
-#include <linux/stat.h>
+#if 0
+#define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION)
+#else
+#define NDEBUG (NDEBUG_ABORT)
+#endif
-struct proc_dir_entry proc_scsi_mac = {
- PROC_SCSI_MAC, 8, "mac_5380",
- S_IFDIR | S_IRUGO | S_IXUGO, 2
-};
+#define USE_WRAPPER
+#define RESET_BOOT
+#define DRIVER_SETUP
/*
- * Define RBV_HACK to run the SCSI driver on RBV Macs; undefine to
- * try getting better interrupt latency
+ * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
+ */
+#ifdef BUG
+#undef RESET_BOOT
+#undef DRIVER_SETUP
+#endif
+
+/*
+ * Need to define this to make SCSI work on RBV machines; leave undefined
+ * to enable interrupts a bit more on other machines
+ * Changes method of SCSI interrupt disable from software mask to VIA IER!
+ * (don't know if that's essential)
+ *
+ * 990502 (jmt) - not needed (and won't work) on new irq architecture
*/
-#define RBV_HACK
+/* #define RBV_HACK */
#ifdef RBV_HACK
#define ENABLE_IRQ() mac_turnon_irq( IRQ_MAC_SCSI );
@@ -99,83 +108,18 @@
#define DISABLE_IRQ() mac_disable_irq( IRQ_MAC_SCSI );
#endif
-#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
- (mac_scsi_host->hostdata))->dma_len)
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#ifndef CONFIG_MAC_SCSI_TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (HZ/2)
-#else
-#define AFTER_RESET_DELAY (5*HZ/2)
-#endif
-
-/***************************** Prototypes *****************************/
-
-#ifdef REAL_DMA
-static int scsi_dma_is_ignored_buserr( unsigned char dma_stat );
-static void mac_scsi_fetch_restbytes( void );
-static long mac_scsi_dma_residual( struct Scsi_Host *instance );
-static int mac_classify_cmd( Scsi_Cmnd *cmd );
-static unsigned long mac_dma_xfer_len( unsigned long wanted_len,
- Scsi_Cmnd *cmd, int write_flag );
-#endif
-#ifdef PSEUDO_DMA
-static int mac_pdma_read(struct Scsi_Host *instance, unsigned char *dst,
- int len);
-static int mac_pdma_write(struct Scsi_Host *instance, unsigned char *src,
- int len);
-static unsigned long mac_dma_xfer_len( unsigned long wanted_len,
- Scsi_Cmnd *cmd, int write_flag );
-#endif
-static void scsi_mac_intr( int irq, void *dummy, struct pt_regs *fp);
-static void mac_scsi_reset_boot( void );
-static unsigned char mac_scsi_reg_read( unsigned char reg );
-static void mac_scsi_reg_write( unsigned char reg, unsigned char value);
-
-/************************* End of Prototypes **************************/
+#define mac_turnon_irq(x) mac_enable_irq(x)
+#define mac_turnoff_irq(x) mac_disable_irq(x)
+extern void via_scsi_clear(void);
-static struct Scsi_Host *mac_scsi_host = NULL;
-#if 0
-static unsigned char (*mac_scsi_reg_read)( unsigned char reg );
-static void (*mac_scsi_reg_write)( unsigned char reg, unsigned char value );
+static void scsi_mac_intr(int irq, void *dummy, struct pt_regs *fp);
+#ifdef RESET_BOOT
+static void mac_scsi_reset_boot(struct Scsi_Host *instance);
#endif
+static char macscsi_read(struct Scsi_Host *instance, int reg);
+static void macscsi_write(struct Scsi_Host *instance, int reg, int value);
-#ifdef REAL_DMA
-static unsigned long mac_dma_residual, mac_dma_startaddr;
-static short mac_dma_active;
-/* pointer to the dribble buffer */
-static char *mac_dma_buffer = NULL;
-/* precalculated physical address of the dribble buffer */
-static unsigned long mac_dma_phys_buffer;
-/* != 0 tells the int handler to copy data from the dribble buffer */
-static char *mac_dma_orig_addr;
-/* size of the dribble buffer; 4k seems enough, since the Falcon cannot use
- * scatter-gather anyway, so most transfers are 1024 byte only. In the rare
- * cases where requests to physical contiguous buffers have been merged, this
- * request is <= 4k (one page). So I don't think we have to split transfers
- * just due to this buffer size...
- */
-#define MAC_BUFFER_SIZE (4096)
-#if 1 /* FIXME: is that an issue for Macs?? */
-/* mask for address bits that can't be used with the ST-DMA */
-static unsigned long mac_dma_stram_mask;
-#define STRAM_ADDR(a) (((a) & mac_dma_stram_mask) == 0)
-#endif
-/* number of bytes to cut from a transfer to handle NCR overruns */
-static int mac_read_overruns = 0;
-#endif
-#ifdef PSEUDO_DMA
-static unsigned long mac_pdma_residual, mac_pdma_startaddr, mac_pdma_current;
-static short mac_pdma_active;
-/* FIXME: is that an issue for Macs?? */
-/* mask for address bits that can't be used with the ST-DMA */
-static unsigned long mac_dma_stram_mask;
-#define STRAM_ADDR(a) (((a) & mac_dma_stram_mask) == 0)
-static int mac_read_overruns = 0;
-#endif
static int setup_can_queue = -1;
static int setup_cmd_per_lun = -1;
static int setup_sg_tablesize = -1;
@@ -184,371 +128,35 @@
#endif
static int setup_hostid = -1;
-
-#if defined(REAL_DMA)
-
-#if 0 /* FIXME */
-static int scsi_dma_is_ignored_buserr( unsigned char dma_stat )
-{
- int i;
- unsigned long addr = SCSI_DMA_READ_P( dma_addr ), end_addr;
-
- if (dma_stat & 0x01) {
-
- /* A bus error happens when DMA-ing from the last page of a
- * physical memory chunk (DMA prefetch!), but that doesn't hurt.
- * Check for this case:
- */
-
- for( i = 0; i < boot_info.num_memory; ++i ) {
- end_addr = boot_info.memory[i].addr +
- boot_info.memory[i].size;
- if (end_addr <= addr && addr <= end_addr + 4)
- return( 1 );
- }
- }
- return( 0 );
-}
-
-
-/* Dead code... wasn't called anyway :-) and causes some trouble, because at
- * end-of-DMA, both SCSI ints are triggered simultaneously, so the NCR int has
- * to clear the DMA int pending bit before it allows other level 6 interrupts.
- */
-static void scsi_dma_buserr (int irq, void *dummy, struct pt_regs *fp)
-{
- unsigned char dma_stat = tt_scsi_dma.dma_ctrl;
-
- /* Don't do anything if a NCR interrupt is pending. Probably it's just
- * masked... */
- if (mac_irq_pending( IRQ_MAC_SCSI ))
- return;
-
- printk("Bad SCSI DMA interrupt! dma_addr=0x%08lx dma_stat=%02x dma_cnt=%08lx\n",
- SCSI_DMA_READ_P(dma_addr), dma_stat, SCSI_DMA_READ_P(dma_cnt));
- if (dma_stat & 0x80) {
- if (!scsi_dma_is_ignored_buserr( dma_stat ))
- printk( "SCSI DMA bus error -- bad DMA programming!\n" );
- }
- else {
- /* Under normal circumstances we never should get to this point,
- * since both interrupts are triggered simultaneously and the 5380
- * int has higher priority. When this irq is handled, that DMA
- * interrupt is cleared. So a warning message is printed here.
- */
- printk( "SCSI DMA intr ?? -- this shouldn't happen!\n" );
- }
-}
-#endif
-
-#endif
-
-void restore_irq(struct pt_regs *regs)
-{
- unsigned long flags;
-
- save_flags(flags);
- flags = (flags & ~0x0700) | (regs->sr & 0x0700);
- restore_flags(flags);
-}
-
static int polled_scsi_on = 0;
-static unsigned char *mac_scsi_regp = NULL;
-
-void scsi_mac_polled (void)
-{
- if (polled_scsi_on)
- {
- if(NCR5380_read(BUS_AND_STATUS_REG)&BASR_IRQ)
- {
- printk("SCSI poll\n");
- scsi_mac_intr(IRQ_MAC_SCSI, NULL, NULL);
- }
- }
-}
-
-static void scsi_mac_intr (int irq, void *dummy, struct pt_regs *fp)
-{
- unsigned long flags;
-#ifdef REAL_DMA
- int dma_stat;
- dma_stat = mac_scsi_dma.dma_ctrl;
-
- INT_PRINTK("scsi%d: NCR5380 interrupt, DMA status = %02x\n",
- mac_scsi_host->host_no, dma_stat & 0xff);
-
- /* Look if it was the DMA that has interrupted: First possibility
- * is that a bus error occurred...
- */
- if (dma_stat & 0x80) {
- if (!scsi_dma_is_ignored_buserr( dma_stat )) {
- printk(KERN_ERR "SCSI DMA caused bus error near 0x%08lx\n",
- SCSI_DMA_READ_P(dma_addr));
- printk(KERN_CRIT "SCSI DMA bus error -- bad DMA programming!");
- }
- }
-
- /* If the DMA is active but not finished, we have the the case
- * that some other 5380 interrupt occurred within the DMA transfer.
- * This means we have residual bytes, if the desired end address
- * is not yet reached. Maybe we have to fetch some bytes from the
- * rest data register, too. The residual must be calculated from
- * the address pointer, not the counter register, because only the
- * addr reg counts bytes not yet written and pending in the rest
- * data reg!
- */
- if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
- mac_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P( dma_addr ) -
- mac_dma_startaddr);
-
- DMA_PRINTK("SCSI DMA: There are %ld residual bytes.\n",
- mac_dma_residual);
-
- if ((signed int)mac_dma_residual < 0)
- mac_dma_residual = 0;
- if ((dma_stat & 1) == 0) {
- /* After read operations, we maybe have to
- transport some rest bytes */
- mac_scsi_fetch_restbytes();
- }
- else {
- /* There seems to be a nasty bug in some SCSI-DMA/NCR
- combinations: If a target disconnects while a write
- operation is going on, the address register of the
- DMA may be a few bytes farer than it actually read.
- This is probably due to DMA prefetching and a delay
- between DMA and NCR. Experiments showed that the
- dma_addr is 9 bytes to high, but this could vary.
- The problem is, that the residual is thus calculated
- wrong and the next transfer will start behind where
- it should. So we round up the residual to the next
- multiple of a sector size, if it isn't already a
- multiple and the originally expected transfer size
- was. The latter condition is there to ensure that
- the correction is taken only for "real" data
- transfers and not for, e.g., the parameters of some
- other command. These shouldn't disconnect anyway.
- */
- if (mac_dma_residual & 0x1ff) {
- DMA_PRINTK("SCSI DMA: DMA bug corrected, "
- "difference %ld bytes\n",
- 512 - (mac_dma_residual & 0x1ff));
- mac_dma_residual = (mac_dma_residual + 511) & ~0x1ff;
- }
- }
- mac_scsi_dma.dma_ctrl = 0;
- }
-
- /* If the DMA is finished, fetch the rest bytes and turn it off */
- if (dma_stat & 0x40) {
- atari_dma_residual = 0;
- if ((dma_stat & 1) == 0)
- atari_scsi_fetch_restbytes();
- tt_scsi_dma.dma_ctrl = 0;
- }
-
-#endif /* REAL_DMA */
-
-#ifdef PSEUDO_DMA
- /* determine if there is any residual for the current transfer */
- if (mac_pdma_active) {
- /* probably EOP interrupt, signaling i.e. target disconnect.
- * We must figure out the residual from the source/destination
- * pointers here ... */
- /* Should check bus status here to make sure it wasn't reselect or reset */
- mac_pdma_residual = HOSTDATA_DMALEN - (mac_pdma_current - mac_pdma_startaddr);
- mac_pdma_active = 0;
- }
-#endif
-
-#ifdef RBV_HACK
- mac_turnoff_irq( IRQ_MAC_SCSI );
-#else
- mac_disable_irq( IRQ_MAC_SCSI );
-#endif
-
- save_flags(flags);
-#ifndef RBV_HACK /* interferes with level triggered RBV IRQs ?? */
- restore_irq(fp);
-#endif
-
- if ( irq == IRQ_IDX(IRQ_MAC_SCSI) )
- NCR5380_intr (irq, dummy, fp);
-
- restore_flags(flags);
-
- /* To be sure the int is not masked */
-#ifdef RBV_HACK
- mac_turnon_irq( IRQ_MAC_SCSI );
-#else
- mac_enable_irq( IRQ_MAC_SCSI );
-#endif
-
- /* Clear the IRQ */
- via_scsi_clear();
-}
-
-
-#ifdef REAL_DMA
-static void mac_scsi_fetch_restbytes( void )
-{
- int nr;
- char *src, *dst;
-
- /* fetch rest bytes in the DMA register */
- dst = (char *)SCSI_DMA_READ_P( dma_addr );
- if ((nr = ((long)dst & 3))) {
- /* there are 'nr' bytes left for the last long address before the
- DMA pointer */
- dst = (char *)( (unsigned long)dst & ~3 );
- DMA_PRINTK("SCSI DMA: there are %d rest bytes for phys addr 0x%08lx",
- nr, (long)dst);
- dst = (char *)PTOV(dst); /* The content of the DMA pointer
- * is a physical address! */
- DMA_PRINTK(" = virt addr 0x%08lx\n", (long)dst);
- for( src = (char *)&mac_scsi_dma.dma_restdata; nr > 0; --nr )
- *dst++ = *src++;
- }
-}
-#endif /* REAL_DMA */
-
-#if 0 /* FIXME : how is the host ID determined on a Mac? */
-#define RTC_READ(reg) \
- ({ unsigned char __val; \
- outb(reg,&tt_rtc.regsel); \
- __val = tt_rtc.data; \
- __val; \
- })
-
-#define RTC_WRITE(reg,val) \
- do { \
- outb(reg,&tt_rtc.regsel); \
- tt_rtc.data = (val); \
- } while(0)
-#endif
-
-int mac_scsi_detect (Scsi_Host_Template *host)
-{
- static int called = 0;
- struct Scsi_Host *instance;
-
- if (!MACH_IS_MAC || called)
- return( 0 );
-
- if (macintosh_config->scsi_type != MAC_SCSI_OLD)
- return( 0 );
-
- host->proc_dir = &proc_scsi_mac;
-
- /* testing: IIfx SCSI without IOP ?? */
- if (macintosh_config->ident == MAC_MODEL_IIFX)
- mac_scsi_regp = via1_regp+0x8000;
- else
- mac_scsi_regp = via1_regp+0x10000;
-
-#if 0 /* maybe if different SCSI versions show up ? */
- mac_scsi_reg_read = IS_A_TT() ? atari_scsi_tt_reg_read :
- atari_scsi_falcon_reg_read;
- mac_scsi_reg_write = IS_A_TT() ? atari_scsi_tt_reg_write :
-#endif atari_scsi_falcon_reg_write;
-
- /* setup variables */
- host->can_queue =
- (setup_can_queue > 0) ? setup_can_queue :
- MAC_SCSI_CAN_QUEUE;
- host->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun :
- MAC_SCSI_CMD_PER_LUN;
- host->sg_tablesize =
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : MAC_SCSI_SG_TABLESIZE;
-
- if (setup_hostid >= 0)
- host->this_id = setup_hostid;
- else {
- /* use 7 as default */
- host->this_id = 7;
- }
-
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
-#endif
-
- instance = scsi_register (host, sizeof (struct NCR5380_hostdata));
- mac_scsi_host = instance;
+/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
+ * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
+ * need ten times the standard value... */
+#define TOSHIBA_DELAY
- /* truncation of machspec bit not critical as instance->irq never used */
-#if 0 /* Might work; problem was only with Falcon lock */
- instance->irq = IRQ_MAC_SCSI;
+#ifdef TOSHIBA_DELAY
+#define AFTER_RESET_DELAY (5*HZ/2)
#else
- instance->irq = 0;
-#endif
- mac_scsi_reset_boot();
- NCR5380_init (instance, 0);
-
- /* This int is actually "pseudo-slow", i.e. it acts like a slow
- * interrupt after having cleared the pending flag for the DMA
- * interrupt. */
- request_irq(IRQ_MAC_SCSI, scsi_mac_intr, IRQ_TYPE_SLOW,
- "SCSI NCR5380", scsi_mac_intr);
-#ifdef REAL_DMA
- tt_scsi_dma.dma_ctrl = 0;
- atari_dma_residual = 0;
-
- if (is_brokenscsi) {
- /* While the read overruns (described by Drew Eckhardt in
- * NCR5380.c) never happened on TTs, they do in fact on the Medusa
- * (This was the cause why SCSI didn't work right for so long
- * there.) Since handling the overruns slows down a bit, I turned
- * the #ifdef's into a runtime condition.
- *
- * In principle it should be sufficient to do max. 1 byte with
- * PIO, but there is another problem on the Medusa with the DMA
- * rest data register. So 'atari_read_overruns' is currently set
- * to 4 to avoid having transfers that aren't a multiple of 4. If
- * the rest data bug is fixed, this can be lowered to 1.
- */
- mac_read_overruns = 4;
- }
-#endif /* REAL_DMA */
-
-#ifdef PSEUDO_DMA
- mac_pdma_residual = 0;
- mac_pdma_active = 0;
-#endif
-
- printk(KERN_INFO "scsi%d: options CAN_QUEUE=%d CMD_PER_LUN=%d SCAT-GAT=%d "
-#ifdef SUPPORT_TAGS
- "TAGGED-QUEUING=%s "
-#endif
- "HOSTID=%d",
- instance->host_no, instance->hostt->can_queue,
- instance->hostt->cmd_per_lun,
- instance->hostt->sg_tablesize,
-#ifdef SUPPORT_TAGS
- setup_use_tagged_queuing ? "yes" : "no",
+#define AFTER_RESET_DELAY (HZ/2)
#endif
- instance->hostt->this_id );
- NCR5380_print_options (instance);
- printk ("\n");
- called = 1;
- return( 1 );
-}
+static volatile unsigned char *mac_scsi_regp = NULL;
+static volatile unsigned char *mac_scsi_drq = NULL;
+static volatile unsigned char *mac_scsi_nodrq = NULL;
-#ifdef MODULE
-int mac_scsi_release (struct Scsi_Host *sh)
-{
- free_irq(IRQ_MAC_SCSI, scsi_mac_intr);
- if (mac_dma_buffer)
- scsi_init_free (mac_dma_buffer, MAC_BUFFER_SIZE);
- return 1;
-}
-#endif
+/*
+ * Function : mac_scsi_setup(char *str, int *ints)
+ *
+ * Purpose : booter command line initialization of the overrides array,
+ *
+ * Inputs : str - unused, ints - array of integer parameters with ints[0]
+ * equal to the number of ints.
+ *
+ */
-void mac_scsi_setup( char *str, int *ints )
-{
+void mac_scsi_setup(char *str, int *ints) {
+#ifdef DRIVER_SETUP
/* Format of mac5380 parameter is:
* mac5380=<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
* Negative values mean don't change.
@@ -606,39 +214,145 @@
setup_use_tagged_queuing = !!ints[5];
}
#endif
+#endif
}
-int mac_scsi_reset( Scsi_Cmnd *cmd, unsigned int reset_flags)
+__setup("mac5380=", mac_scsi_setup);
+
+#if 0
+#define MAC_ADDRESS(card) (ecard_address((card), ECARD_IOC, ECARD_SLOW) + 0x800)
+#define MAC_IRQ(card) ((card)->irq)
+#endif
+
+/*
+ * XXX: status debug
+ */
+static struct Scsi_Host *default_instance;
+
+/*
+ * Function : int macscsi_detect(Scsi_Host_Template * tpnt)
+ *
+ * Purpose : initializes mac NCR5380 driver based on the
+ * command line / compile time port and irq definitions.
+ *
+ * Inputs : tpnt - template for this SCSI adapter.
+ *
+ * Returns : 1 if a host adapter was found, 0 if not.
+ *
+ */
+
+int macscsi_detect(Scsi_Host_Template * tpnt)
{
- int rv;
- struct NCR5380_hostdata *hostdata =
- (struct NCR5380_hostdata *)cmd->host->hostdata;
-
- /* For doing the reset, SCSI interrupts must be disabled first,
- * since the 5380 raises its IRQ line while _RST is active and we
- * can't disable interrupts completely, since we need the timer.
- */
- /* And abort a maybe active DMA transfer */
- mac_turnoff_irq( IRQ_MAC_SCSI );
-#ifdef REAL_DMA
- mac_scsi_dma.dma_ctrl = 0;
-#endif /* REAL_DMA */
-#ifdef PSEUDO_DMA
- mac_pdma_active = 0;
+ int count = 0;
+ static int called = 0;
+ struct Scsi_Host *instance;
+
+ if (!MACH_IS_MAC || called)
+ return( 0 );
+
+ if (macintosh_config->scsi_type != MAC_SCSI_OLD)
+ return( 0 );
+
+ tpnt->proc_name = "Mac 5380 SCSI";
+
+ /* setup variables */
+ tpnt->can_queue =
+ (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
+ tpnt->cmd_per_lun =
+ (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
+ tpnt->sg_tablesize =
+ (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
+
+ if (setup_hostid >= 0)
+ tpnt->this_id = setup_hostid;
+ else {
+ /* use 7 as default */
+ tpnt->this_id = 7;
+ }
+
+#ifdef SUPPORT_TAGS
+ if (setup_use_tagged_queuing < 0)
+ setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
#endif
- rv = NCR5380_reset(cmd, reset_flags);
+#if 0 /* loop over multiple adapters (Powerbooks ??) */
+ for (count = 0; count < mac_num_scsi; count++) {
+#endif
+ instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
+ default_instance = instance;
- /* Re-enable ints */
- mac_turnon_irq( IRQ_MAC_SCSI );
+ if (macintosh_config->ident == MAC_MODEL_IIFX) {
+ mac_scsi_regp = via1+0x8000;
+ mac_scsi_drq = via1+0xE000;
+ mac_scsi_nodrq = via1+0xC000;
+ } else {
+ mac_scsi_regp = via1+0x10000;
+ mac_scsi_drq = via1+0x6000;
+ mac_scsi_nodrq = via1+0x12000;
+ }
+
+
+ instance->io_port = (unsigned long) mac_scsi_regp;
+ instance->irq = IRQ_MAC_SCSI;
+
+#ifdef RESET_BOOT
+ mac_scsi_reset_boot(instance);
+#endif
+
+ NCR5380_init(instance, 0);
+
+ instance->n_io_port = 255;
+
+ ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
+
+ if (instance->irq != IRQ_NONE)
+#ifdef USE_WRAPPER
+ if (request_irq(instance->irq, scsi_mac_intr, IRQ_FLG_SLOW, "MacSCSI-5380", NULL)) {
+#else
+ if (request_irq(instance->irq, macscsi_intr, IRQ_FLG_SLOW, "MacSCSI-5380", NULL)) {
+#endif
+ printk("scsi%d: IRQ%d not free, interrupts disabled\n",
+ instance->host_no, instance->irq);
+ instance->irq = IRQ_NONE;
+ }
+
+ printk("scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
+ if (instance->irq == IRQ_NONE)
+ printk ("s disabled");
+ else
+ printk (" %d", instance->irq);
+ printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
+ instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
+ printk("\nscsi%d:", instance->host_no);
+ NCR5380_print_options(instance);
+ printk("\n");
+#if 0 /* multiple adapters */
+ }
+#endif
+ called = 1;
+ return 1;
- return( rv );
}
-
-static void mac_scsi_reset_boot( void )
+int macscsi_release (struct Scsi_Host *shpnt)
+{
+ if (shpnt->irq != IRQ_NONE)
+ free_irq (shpnt->irq, NULL);
+
+ return 0;
+}
+
+#ifdef RESET_BOOT
+/*
+ * Our 'bus reset on boot' function
+ */
+
+static void mac_scsi_reset_boot(struct Scsi_Host *instance)
{
unsigned long end;
+
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
/*
* Do a SCSI reset to clean up the bus during initialization. No messing
@@ -662,7 +376,7 @@
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
NCR5380_read( RESET_PARITY_INTERRUPT_REG );
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
+ for( end = jiffies + AFTER_RESET_DELAY; jiffies < end; )
barrier();
/* switch on SCSI IRQ again */
@@ -670,438 +384,359 @@
printk( " done\n" );
}
+#endif
+const char * macscsi_info (struct Scsi_Host *spnt) {
+ return "";
+}
-const char * mac_scsi_info (struct Scsi_Host *host)
+void restore_irq(struct pt_regs *regs)
{
- /* mac_scsi_detect() is verbose enough... */
- static const char string[] = "Macintosh NCR5380 SCSI";
- return string;
-}
+ unsigned long flags;
+ save_flags(flags);
+ flags = (flags & ~0x0700) | (regs->sr & 0x0700);
+ restore_flags(flags);
+}
-#if defined(REAL_DMA)
+#ifdef USE_WRAPPER
+/*
+ * SCSI interrupt wrapper - just to make sure it's the proper irq, and
+ * that we leave the handler in a clean state
+ */
-unsigned long mac_scsi_dma_setup( struct Scsi_Host *instance, void *data,
- unsigned long count, int dir )
+static void scsi_mac_intr (int irq, void *dev_id, struct pt_regs *fp)
{
- unsigned long addr = virt_to_phys( data );
+#ifndef RBV_HACK
+ unsigned long flags;
+#endif
- DMA_PRINTK("scsi%d: setting up dma, data = %p, phys = %lx, count = %ld, "
- "dir = %d\n", instance->host_no, data, addr, count, dir);
+#ifdef RBV_HACK
+ mac_turnoff_irq( IRQ_MAC_SCSI );
+#else
+ mac_disable_irq( IRQ_MAC_SCSI );
+#endif
- if (!STRAM_ADDR(addr)) {
- /* If we have a non-DMAable address on a Falcon, use the dribble
- * buffer; 'orig_addr' != 0 in the read case tells the interrupt
- * handler to copy data from the dribble buffer to the originally
- * wanted address.
- */
- if (dir)
- memcpy( mac_dma_buffer, data, count );
- else
- mac_dma_orig_addr = data;
- addr = mac_dma_phys_buffer;
+ if ( irq == IRQ_MAC_SCSI ) {
+#ifndef RBV_HACK
+ save_flags(flags);
+ restore_irq(fp);
+#endif
+ NCR5380_intr (irq, dev_id, fp);
+#ifndef RBV_HACK
+ restore_flags(flags);
+#endif
}
-
- mac_dma_startaddr = addr; /* Needed for calculating residual later. */
-
- /* Cache cleanup stuff: On writes, push any dirty cache out before sending
- * it to the peripheral. (Must be done before DMA setup, since at least
- * the ST-DMA begins to fill internal buffers right after setup. For
- * reads, invalidate any cache, may be altered after DMA without CPU
- * knowledge.
- *
- * ++roman: For the Medusa, there's no need at all for that cache stuff,
- * because the hardware does bus snooping (fine!).
- */
- dma_cache_maintenance( addr, count, dir );
-
- if (count == 0)
- printk(KERN_NOTICE "SCSI warning: DMA programmed for 0 bytes !\n");
- mac_scsi_dma.dma_ctrl = dir;
- SCSI_DMA_WRITE_P( dma_addr, addr );
- SCSI_DMA_WRITE_P( dma_cnt, count );
- mac_scsi_dma.dma_ctrl = dir | 2;
+ /* To be sure the int is not masked */
+#ifdef RBV_HACK
+ mac_turnon_irq( IRQ_MAC_SCSI );
+#else
+ mac_enable_irq( IRQ_MAC_SCSI );
+#endif
- return( count );
+#if 1 /* ??? 0 worked */
+ /* Clear the IRQ */
+ via_scsi_clear();
+#endif
}
+#endif
+/*
+ * pseudo-DMA transfer functions, copied and modified from Russel King's
+ * ARM 5380 driver (cumana_1)
+ *
+ * Work in progress (sort of), didn't work last time I checked, don't use!
+ */
-static long mac_scsi_dma_residual( struct Scsi_Host *instance )
-{
- return( mac_dma_residual );
+#ifdef NOT_EFFICIENT
+#define CTRL(p,v) outb(*ctrl = (v), (p) - 577)
+#define STAT(p) inb((p)+1)
+#define IN(p) inb((p))
+#define OUT(v,p) outb((v), (p))
+#else
+#if 0
+#define CTRL(p,v) (p[-2308] = (*ctrl = (v)))
+#else
+#define CTRL(p,v) (*ctrl = (v))
+#endif
+#define STAT(p) (p[1<<4])
+#define IN(p) (*(p))
+#define IN2(p) ((unsigned short)(*(volatile unsigned long *)(p)))
+#define OUT(v,p) (*(p) = (v))
+#define OUT2(v,p) (*((volatile unsigned long *)(p)) = (v))
+#endif
+#define L(v) (((v)<<16)|((v) & 0x0000ffff))
+#define H(v) (((v)>>16)|((v) & 0xffff0000))
+#define ioaddr(v) (v)
+
+static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *addr,
+ int len)
+{
+ int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
+ int oldctrl = *ctrl;
+ unsigned long *laddr;
+#ifdef NOT_EFFICIENT
+ int iobase = instance->io_port;
+ int dma_io = mac_scsi_nodrq;
+#else
+ volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port);
+ volatile unsigned char *dma_io = (unsigned char *)(mac_scsi_nodrq);
+#endif
+
+ if(!len) return 0;
+
+ CTRL(iobase, 0x02);
+ laddr = (unsigned long *)addr;
+ while(len >= 32)
+ {
+ int status;
+ unsigned long v;
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(!(status & 0x40))
+ continue;
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ v=*laddr++; OUT2(L(v),dma_io); OUT2(H(v),dma_io);
+ len -= 32;
+ if(len == 0)
+ break;
+ }
+
+ addr = (unsigned char *)laddr;
+ CTRL(iobase, 0x12);
+ while(len > 0)
+ {
+ int status;
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(status & 0x40)
+ {
+ OUT(*addr++, dma_io);
+ if(--len == 0)
+ break;
+ }
+
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(status & 0x40)
+ {
+ OUT(*addr++, dma_io);
+ if(--len == 0)
+ break;
+ }
+ }
+end:
+ CTRL(iobase, oldctrl|0x40);
+ return len;
}
+static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *addr,
+ int len)
+{
+ int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
+ int oldctrl = *ctrl;
+ unsigned long *laddr;
+#ifdef NOT_EFFICIENT
+ int iobase = instance->io_port;
+ int dma_io = mac_scsi_nodrq;
+#else
+ volatile unsigned char *iobase = (unsigned char *)ioaddr(instance->io_port);
+ volatile unsigned char *dma_io = (unsigned char *)((int)mac_scsi_nodrq);
+#endif
-#define CMD_SURELY_BLOCK_MODE 0
-#define CMD_SURELY_BYTE_MODE 1
-#define CMD_MODE_UNKNOWN 2
+ if(!len) return 0;
-static int mac_classify_cmd( Scsi_Cmnd *cmd )
-{
- unsigned char opcode = cmd->cmnd[0];
-
- if (opcode == READ_DEFECT_DATA || opcode == READ_LONG ||
- opcode == READ_BUFFER)
- return( CMD_SURELY_BYTE_MODE );
- else if (opcode == READ_6 || opcode == READ_10 ||
- opcode == 0xa8 /* READ_12 */ || opcode == READ_REVERSE ||
- opcode == RECOVER_BUFFERED_DATA) {
- /* In case of a sequential-access target (tape), special care is
- * needed here: The transfer is block-mode only if the 'fixed' bit is
- * set! */
- if (cmd->device->type == TYPE_TAPE && !(cmd->cmnd[1] & 1))
- return( CMD_SURELY_BYTE_MODE );
- else
- return( CMD_SURELY_BLOCK_MODE );
- }
- else
- return( CMD_MODE_UNKNOWN );
+ CTRL(iobase, 0x00);
+ laddr = (unsigned long *)addr;
+ while(len >= 32)
+ {
+ int status;
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(!(status & 0x40))
+ continue;
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ *laddr++ = IN2(dma_io)|(IN2(dma_io)<<16);
+ len -= 32;
+ if(len == 0)
+ break;
+ }
+
+ addr = (unsigned char *)laddr;
+ CTRL(iobase, 0x10);
+ while(len > 0)
+ {
+ int status;
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(status & 0x40)
+ {
+ *addr++ = IN(dma_io);
+ if(--len == 0)
+ break;
+ }
+
+ status = STAT(iobase);
+ if(status & 0x80)
+ goto end;
+ if(status & 0x40)
+ {
+ *addr++ = IN(dma_io);
+ if(--len == 0)
+ break;
+ }
+ }
+end:
+ CTRL(iobase, oldctrl|0x40);
+ return len;
}
-#endif /* REAL_DMA */
+#undef STAT
+#undef CTRL
+#undef IN
+#undef OUT
-#if defined(REAL_DMA) || defined(PSEUDO_DMA)
-/* This function calculates the number of bytes that can be transferred via
- * DMA. On the TT, this is arbitrary, but on the Falcon we have to use the
- * ST-DMA chip. There are only multiples of 512 bytes possible and max.
- * 255*512 bytes :-( This means also, that defining READ_OVERRUNS is not
- * possible on the Falcon, since that would require to program the DMA for
- * n*512 - atari_read_overrun bytes. But it seems that the Falcon doesn't have
- * the overrun problem, so this question is academic :-)
+/*
+ * NCR 5380 register access functions
*/
-static unsigned long mac_dma_xfer_len( unsigned long wanted_len,
- Scsi_Cmnd *cmd,
- int write_flag )
+#ifdef ORIG
+#if 0
+#define CTRL(p,v) outb(*ctrl = (v), (p) - 577)
+#else
+#define CTRL(p,v) (*ctrl = (v))
+#endif
+
+static char macscsi_read(struct Scsi_Host *instance, int reg)
{
- unsigned long possible_len, limit;
+ int iobase = instance->io_port;
+ int i;
+ int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-#if defined(REAL_DMA)
- if (IS_A_TT())
- /* TT SCSI DMA can transfer arbitrary #bytes */
- return( wanted_len );
-
- /* ST DMA chip is stupid -- only multiples of 512 bytes! (and max.
- * 255*512 bytes, but this should be enough)
- *
- * ++roman: Aaargl! Another Falcon-SCSI problem... There are some commands
- * that return a number of bytes which cannot be known beforehand. In this
- * case, the given transfer length is an "allocation length". Now it
- * can happen that this allocation length is a multiple of 512 bytes and
- * the DMA is used. But if not n*512 bytes really arrive, some input data
- * will be lost in the ST-DMA's FIFO :-( Thus, we have to distinguish
- * between commands that do block transfers and those that do byte
- * transfers. But this isn't easy... there are lots of vendor specific
- * commands, and the user can issue any command via the
- * SCSI_IOCTL_SEND_COMMAND.
- *
- * The solution: We classify SCSI commands in 1) surely block-mode cmd.s,
- * 2) surely byte-mode cmd.s and 3) cmd.s with unknown mode. In case 1)
- * and 3), the thing to do is obvious: allow any number of blocks via DMA
- * or none. In case 2), we apply some heuristic: Byte mode is assumed if
- * the transfer (allocation) length is < 1024, hoping that no cmd. not
- * explicitly known as byte mode have such big allocation lengths...
- * BTW, all the discussion above applies only to reads. DMA writes are
- * unproblematic anyways, since the targets aborts the transfer after
- * receiving a sufficient number of bytes.
- *
- * Another point: If the transfer is from/to an non-ST-RAM address, we
- * use the dribble buffer and thus can do only STRAM_BUFFER_SIZE bytes.
- */
+ CTRL(iobase, 0);
+#if 0
+ i = inb(iobase + 64 + reg);
+#else
+ i = inb(iobase + reg<<4);
+#endif
+ CTRL(iobase, 0x40);
- if (write_flag) {
- /* Write operation can always use the DMA, but the transfer size must
- * be rounded up to the next multiple of 512 (atari_dma_setup() does
- * this).
- */
- possible_len = wanted_len;
- }
- else {
- /* Read operations: if the wanted transfer length is not a multiple of
- * 512, we cannot use DMA, since the ST-DMA cannot split transfers
- * (no interrupt on DMA finished!)
- */
- if (wanted_len & 0x1ff)
- possible_len = 0;
- else {
- /* Now classify the command (see above) and decide whether it is
- * allowed to do DMA at all */
- switch( falcon_classify_cmd( cmd )) {
- case CMD_SURELY_BLOCK_MODE:
- possible_len = wanted_len;
- break;
- case CMD_SURELY_BYTE_MODE:
- possible_len = 0; /* DMA prohibited */
- break;
- case CMD_MODE_UNKNOWN:
- default:
- /* For unknown commands assume block transfers if the transfer
- * size/allocation length is >= 1024 */
- possible_len = (wanted_len < 1024) ? 0 : wanted_len;
- break;
- }
- }
- }
+ return i;
+}
- /* Last step: apply the hard limit on DMA transfers */
- limit = (atari_dma_buffer && !STRAM_ADDR( virt_to_phys(cmd->SCp.ptr) )) ?
- STRAM_BUFFER_SIZE : 255*512;
- if (possible_len > limit)
- possible_len = limit;
-
- if (possible_len != wanted_len)
- DMA_PRINTK("Sorry, must cut DMA transfer size to %ld bytes "
- "instead of %ld\n", possible_len, wanted_len);
+static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
+{
+ int iobase = instance->io_port;
+ int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-#else /* REAL_DMA */
- possible_len = wanted_len;
+ CTRL(iobase, 0);
+#if 0
+ outb(value, iobase + 64 + reg);
+#else
+ outb(value, iobase + reg<<4);
#endif
-
- return( possible_len );
+ CTRL(iobase, 0x40);
}
-#endif /* REAL_DMA || PSEUDO_DMA */
-
-
-/*
- * FIXME !!!
- */
-/* NCR5380 register access functions
- */
+#undef CTRL
-static unsigned char mac_scsi_reg_read( unsigned char reg )
+#else
+static char macscsi_read(struct Scsi_Host *instance, int reg)
{
return( mac_scsi_regp[reg << 4] );
}
-static void mac_scsi_reg_write( unsigned char reg, unsigned char value )
+static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
{
mac_scsi_regp[reg << 4] = value;
}
-#include "mac_NCR5380.c"
+#endif
-#ifdef PSEUDO_DMA
+#include "NCR5380.c"
/*
- * slightly optimized PIO transfer routines, experimental!
- * command may time out if interrupts are left enabled
+ * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
+ * reentering NCR5380_print_status seems to have ugly side effects
*/
-static inline int mac_pdma_read (struct Scsi_Host *instance, unsigned char *dst, int len)
+void scsi_mac_debug (void)
{
- register unsigned char *d = dst;
- register i = len;
- register unsigned char p, tmp;
-
-#if (NDEBUG & NDEBUG_PSEUDO_DMA)
- printk("pdma_read: reading %d bytes to %p\n", len, dst);
-#endif
-
- mac_pdma_residual = len;
- if (mac_pdma_active) {
- printk("pseudo-DMA already active in pread!\n");
- return -1;
- }
- mac_pdma_active = 1;
- mac_pdma_startaddr = (unsigned long) dst;
- mac_pdma_current = (unsigned long) dst;
-
- /*
- * Get the phase from the bus (sanity check)
- * Hopefully, the phase bits are valid here ...
- */
- p = NCR5380_read(STATUS_REG) & PHASE_MASK;
- if (!(p & SR_IO)) {
- PDMA_PRINTK("NCR5380_pread: initial phase mismatch!\n");
- NCR_PRINT_PHASE(NDEBUG_ANY);
- return -1;
- }
-
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
- * phase specified in the appropriate bits of the TARGET COMMAND
- * REGISTER match the STATUS REGISTER
- */
-
-#if 0 /* done in transfer_dma */
- p = PHASE_DATAIN;
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-#endif
-
- for (; i; --i) {
- HSH_PRINTK(" read %d ..", i);
- /* check if we were interrupted ... */
- if (!mac_pdma_active) {
- printk("pwrite: interrupt detected!\n");
- break;
- }
-
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
- */
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- barrier();
-
- HSH_PRINTK(" REQ ..");
-
- /* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- if (!mac_pdma_active)
- printk("scsi%d : phase mismatch after interrupt\n", instance->host_no);
- else
- printk("scsi%d : phase mismatch w/o interrupt\n", instance->host_no);
- NCR_PRINT_PHASE(NDEBUG_ANY);
- break;
- }
-
- /* Do actual transfer from SCSI bus to memory */
- *d = NCR5380_read(CURRENT_SCSI_DATA_REG);
-
- d++;
-
- /* Handshake ... */
-
- /* Assert ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
- HSH_PRINTK(" ACK ..");
-
- /* Wait for REQ to be dropped */
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- barrier();
- HSH_PRINTK(" /REQ ..");
-
- /* Drop ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- HSH_PRINTK(" /ACK !\n");
-
- mac_pdma_current = (unsigned long) d;
- mac_pdma_residual--;
- }
+ unsigned long flags;
+ NCR5380_local_declare();
-#if (NDEBUG & NDEBUG_PSEUDO_DMA)
- printk("pdma_read: read at %d bytes to %p\n", i, dst);
+ if (default_instance) {
+#if 0
+ NCR5380_setup(default_instance);
+ if(NCR5380_read(BUS_AND_STATUS_REG)&BASR_IRQ)
#endif
-
- if (mac_pdma_residual)
- printk("pread: leaving with residual %ld of %ld\n",
- mac_pdma_residual, len);
- mac_pdma_active = 0;
-
- /* ?? */
+ save_flags(flags);
+ cli();
+ NCR5380_print_status(default_instance);
+ restore_flags(flags);
+ }
#if 0
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ polled_scsi_on = 1;
#endif
- return 0;
}
-
-static inline int mac_pdma_write (struct Scsi_Host *instance, unsigned char *src, int len)
-{
- register unsigned char *s = src;
- register i = len;
- register unsigned char p, tmp;
-
-#if (NDEBUG & NDEBUG_PSEUDO_DMA)
- printk("pdma_write: writing %d bytes from %p\n", len, src);
-#endif
-
- mac_pdma_residual = len;
- if (mac_pdma_active) {
- printk("pseudo-DMA already active in pwrite!\n");
- return -1;
- }
- mac_pdma_active = 1;
- mac_pdma_startaddr = (unsigned long) src;
- mac_pdma_current = (unsigned long) src;
-
- /*
- * Get the phase from the bus (sanity check)
- */
- p = NCR5380_read(STATUS_REG) & PHASE_MASK;
- if (p & SR_IO) {
- printk("NCR5380_pwrite: initial phase mismatch!\n");
- NCR_PRINT_PHASE(NDEBUG_ANY);
- return -1;
- }
-
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
- * phase specified in the appropriate bits of the TARGET COMMAND
- * REGISTER match the STATUS REGISTER
- */
-
-#if 0 /* already done in transfer_dma */
- p = PHASE_DATAOUT;
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-#endif
-
- for (; i; --i) {
- /* check if we were interrupted ... */
- if (!mac_pdma_active) {
- printk("pwrite: interrupt detected!\n");
- break;
- }
-
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
- */
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ));
-
- /* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- if (!mac_pdma_active)
- printk("scsi%d : phase mismatch after interrupt\n", instance->host_no);
- else
- printk("scsi%d : phase mismatch w/o interrupt\n", instance->host_no);
- NCR_PRINT_PHASE(NDEBUG_ANY);
- /* should we signal an error here?? */
- break;
- }
-
- /* Do actual transfer to SCSI bus from memory */
-
- NCR5380_write(OUTPUT_DATA_REG, *s);
+/*
+ * Helper function for interrupt trouble. More ugly side effects here.
+ */
- s++;
+void scsi_mac_polled (void)
+{
+ unsigned long flags;
+ NCR5380_local_declare();
+ struct Scsi_Host *instance;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA);
-
- /* Handshake ... assert ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ACK);
-
- /* ... wait for REQ to be dropped */
- while (NCR5380_read(STATUS_REG) & SR_REQ);
-
- /* and drop ACK (and DATA) ! */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- mac_pdma_current = (unsigned long) s;
- mac_pdma_residual--;
- }
-
-#if (NDEBUG & NDEBUG_PSEUDO_DMA)
- printk("pdma_write: write at %d bytes from %p\n", i, src);
+#if 0
+ for (instance = first_instance; instance && (instance->hostt ==
+ the_template); instance = instance->next)
+ if (instance->irq == IRQ_MAC_SCSI && polled_scsi_on) {
+#else
+ instance = default_instance;
#endif
+ NCR5380_setup(instance);
+ if(NCR5380_read(BUS_AND_STATUS_REG)&BASR_IRQ)
+ {
+ printk("SCSI poll\n");
+ save_flags(flags);
+ cli();
+#ifdef USE_WRAPPER
+ scsi_mac_intr(IRQ_MAC_SCSI, instance, NULL);
+#else
+ macscsi_intr(IRQ_MAC_SCSI, instance, NULL);
+#endif
+ restore_flags(flags);
+ }
+#if 0
+ }
+#endif
+}
- if (mac_pdma_residual)
- printk("pwrite: leaving with residual %ld of len %ld \n",
- mac_pdma_residual, len);
- mac_pdma_active = 0;
-
- return 0;
-}
-#endif /* PSEUDO_DMA */
#ifdef MODULE
-Scsi_Host_Template driver_template = MAC_SCSI;
+
+Scsi_Host_Template driver_template = MAC_NCR5380;
#include "scsi_module.c"
#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)