patch-2.3.10 linux/drivers/net/olympic.c

Next file: linux/drivers/net/olympic.h
Previous file: linux/drivers/net/ne3210.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.3.9/linux/drivers/net/olympic.c linux/drivers/net/olympic.c
@@ -0,0 +1,1663 @@
+/*
+ *   olympic.c (c) 1999 Peter De Schrijver All Rights Reserved
+ *		   1999 Mike Phillips (phillim@amtrak.com)
+ *
+ *  Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic
+ *  chipset. 
+ *
+ *  Base Driver Skeleton:
+ *      Written 1993-94 by Donald Becker.
+ *
+ *      Copyright 1993 United States Government as represented by the
+ *      Director, National Security Agency.
+ *
+ *  Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their 
+ *  assistance and perserverance with the testing of this driver.
+ *
+ *  This software may be used and distributed according to the terms
+ *  of the GNU Public License, incorporated herein by reference.
+ * 
+ *  4/27/99 - Alpha Release 0.1.0
+ *            First release to the public
+ *
+ *  6/8/99  - Official Release 0.2.0   
+ *            Merged into the kernel code 
+ *  
+ *  To Do:
+ *
+ *  Sanitize for smp
+ *
+ *  If Problems do Occur
+ *  Most problems can be rectified by either closing and opening the interface
+ *  (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult
+ *  if compiled into the kernel).
+ */
+
+/* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */
+
+#define OLYMPIC_DEBUG 0
+
+/* Change OLYMPIC_NETWORK_MONITOR to receive mac frames through the arb channel.
+ * Will also create a /proc/net/olympic_tr entry if proc_fs is compiled into the
+ * kernel.
+ * Intended to be used to create a ring-error reporting network module 
+ * i.e. it will give you the source address of beaconers on the ring 
+ */
+
+#define OLYMPIC_NETWORK_MONITOR 0
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/ptrace.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/trdevice.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <net/checksum.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+
+#include "olympic.h"
+
+/* I've got to put some intelligence into the version number so that Peter and I know
+ * which version of the code somebody has got. 
+ * Version Number = a.b.c.d  where a.b.c is the level of code and d is the latest author.
+ * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike
+ * 
+ * Official releases will only have an a.b.c version number format.
+ */
+
+static char *version = 
+"Olympic.c v0.2.0 6/8/99 - Peter De Schrijver & Mike Phillips" ; 
+
+static char *open_maj_error[]  = {"No error", "Lobe Media Test", "Physical Insertion",
+				   "Address Verification", "Neighbor Notification (Ring Poll)",
+				   "Request Parameters","FDX Registration Request",
+				   "FDX Duplicate Address Check", "Station registration Query Wait",
+				   "Unknown stage"};
+
+static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault",
+				   "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing",
+				   "Duplicate Node Address","Request Parameters","Remove Received",
+				   "Reserved", "Reserved", "No Monitor Detected for RPL", 
+				   "Monitor Contention failer for RPL", "FDX Protocol Error"};
+
+/* Module paramters */
+
+/* Ring Speed 0,4,16,100 
+ * 0 = Autosense         
+ * 4,16 = Selected speed only, no autosense
+ * This allows the card to be the first on the ring
+ * and become the active monitor.
+ * 100 = Nothing at present, 100mbps is autodetected
+ * if FDX is turned on. May be implemented in the future to 
+ * fail if 100mpbs is not detected.
+ *
+ * WARNING: Some hubs will allow you to insert
+ * at the wrong speed
+ */
+
+static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+
+MODULE_PARM(ringspeed, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i");
+
+/* Packet buffer size */
+
+static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ;
+ 
+MODULE_PARM(pkt_buf_sz, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i") ; 
+
+/* Message Level */
+
+static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; 
+
+MODULE_PARM(message_level, "1-" __MODULE_STRING(OLYMPIC_MAX_ADAPTERS) "i") ; 
+
+static int olympic_scan(struct device *dev);
+static int olympic_init(struct device *dev);
+static int olympic_open(struct device *dev);
+static int olympic_xmit(struct sk_buff *skb, struct device *dev);
+static int olympic_close(struct device *dev);
+static void olympic_set_rx_mode(struct device *dev);
+static void olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct net_device_stats * olympic_get_stats(struct device *dev);
+static int olympic_set_mac_address(struct device *dev, void *addr) ; 
+static void olympic_arb_cmd(struct device *dev);
+static int olympic_change_mtu(struct device *dev, int mtu);
+static void olympic_srb_bh(struct device *dev) ; 
+static void olympic_asb_bh(struct device *dev) ; 
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+static int sprintf_info(char *buffer, struct device *dev) ; 
+#endif
+#endif
+
+__initfunc(int olympic_probe(struct device *dev)) 
+{
+	int cards_found;
+
+	cards_found=olympic_scan(dev);
+	return cards_found ? 0 : -ENODEV;
+}
+
+__initfunc(static int olympic_scan(struct device *dev)) 
+{
+	struct pci_dev *pci_device = NULL ;
+	struct olympic_private *olympic_priv;
+	int card_no = 0 ;
+	if (pci_present()) {
+
+		while((pci_device=pci_find_device(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR_WAKE, pci_device))) {
+
+			pci_set_master(pci_device);
+
+			/* Check to see if io has been allocated, if so, we've already done this card,
+			   so continue on the card discovery loop  */
+
+			if (check_region(pci_device->base_address[0] & (~3), OLYMPIC_IO_SPACE)) {
+				card_no++ ; 
+				continue ; 
+			}
+
+			olympic_priv=kmalloc(sizeof (struct olympic_private), GFP_KERNEL);
+			memset(olympic_priv, 0, sizeof(struct olympic_private));
+			init_waitqueue_head(&olympic_priv->srb_wait);
+			init_waitqueue_head(&olympic_priv->trb_wait);
+#ifndef MODULE
+			dev=init_trdev(dev, 0);
+#endif
+			dev->priv=(void *)olympic_priv;
+#if OLYMPIC_DEBUG  
+			printk("pci_device: %p, dev:%p, dev->priv: %p\n", pci_device, dev, dev->priv);
+#endif 
+			dev->irq=pci_device->irq;
+			dev->base_addr=pci_device->base_address[0] & (~3);
+			dev->init=&olympic_init;
+			olympic_priv->olympic_mmio=ioremap(pci_device->base_address[1],256);
+			olympic_priv->olympic_lap=ioremap(pci_device->base_address[2],2048);
+			
+			if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) )
+				olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; 
+			else
+				olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; 
+
+			olympic_priv->olympic_ring_speed = ringspeed[card_no] ; 
+			olympic_priv->olympic_message_level = message_level[card_no] ; 
+			olympic_priv->olympic_multicast_set  = 0 ; 
+	
+			if(olympic_init(dev)==-1) {
+				unregister_netdevice(dev);
+				kfree(dev->priv);
+				return 0;
+			}				
+
+			dev->open=&olympic_open;
+			dev->hard_start_xmit=&olympic_xmit;
+			dev->change_mtu=&olympic_change_mtu;
+
+			dev->stop=&olympic_close;
+			dev->do_ioctl=NULL;
+			dev->set_multicast_list=&olympic_set_rx_mode;
+			dev->get_stats=&olympic_get_stats ;
+			dev->set_mac_address=&olympic_set_mac_address ;  
+			return 1; 
+		}
+	}
+	return  0 ;
+}
+
+
+__initfunc(static int olympic_init(struct device *dev)) 
+{
+    	struct olympic_private *olympic_priv;
+	__u8 *olympic_mmio, *init_srb,*adapter_addr;
+	unsigned long t; 
+	unsigned int uaa_addr;
+
+    	olympic_priv=(struct olympic_private *)dev->priv;
+	olympic_mmio=olympic_priv->olympic_mmio;
+
+	printk("%s \n", version);
+	printk("%s: IBM PCI tokenring card. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n",dev->name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq);
+
+	request_region(dev->base_addr, OLYMPIC_IO_SPACE, "olympic");
+	writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL);
+	t=jiffies;
+	while((readl(olympic_priv->olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
+		schedule();		
+		if(jiffies-t > 40*HZ) {
+			printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+			release_region(dev->base_addr, OLYMPIC_IO_SPACE) ; 
+			return -1;
+		}
+	}
+
+#if OLYMPIC_DEBUG
+	printk("BCTL: %x\n",readl(olympic_mmio+BCTL));
+	printk("GPR: %x\n",readw(olympic_mmio+GPR));
+	printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+	/* Aaaahhh, You have got to be real careful setting GPR, the card
+	   holds the previous values from flash memory, including autosense 
+           and ring speed */
+
+	writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL);
+	
+	if (olympic_priv->olympic_ring_speed  == 0) { /* Autosense */
+		writel(readl(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR);
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Ringspeed autosense mode on\n",dev->name);
+	} else if (olympic_priv->olympic_ring_speed == 16) {
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", dev->name);
+		writel(GPR_16MBPS, olympic_mmio+GPR);
+	} else if (olympic_priv->olympic_ring_speed == 4) {
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", dev->name) ; 
+		writel(0, olympic_mmio+GPR);
+	} 
+	
+	writel(readl(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR);
+
+#if OLYMPIC_DEBUG
+	printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; 
+#endif
+	/* start solo init */
+	writel((1<<15),olympic_mmio+SISR_MASK_SUM);
+
+	t=jiffies;
+	while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
+		schedule();		
+		if(jiffies-t > 40*HZ) {
+			printk(KERN_ERR "IBM PCI tokenring card not responding.\n");
+			release_region(dev->base_addr, OLYMPIC_IO_SPACE); 
+			return -1;
+		}
+	}
+	
+	writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+
+#if OLYMPIC_DEBUG
+	printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+#endif
+
+	init_srb=olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWO)) & (~0xf800));
+
+#if OLYMPIC_DEBUG		
+{
+	int i;
+	printk("init_srb(%p): ",init_srb);
+	for(i=0;i<20;i++)
+		printk("%x ",readb(init_srb+i));
+	printk("\n");
+}
+#endif	
+	if(readw(init_srb+6)) {
+		printk(KERN_INFO "tokenring card intialization failed. errorcode : %x\n",readw(init_srb+6));
+		release_region(dev->base_addr, OLYMPIC_IO_SPACE);
+		return -1;
+	}
+
+	uaa_addr=ntohs(readw(init_srb+8));
+
+#if OLYMPIC_DEBUG
+	printk("UAA resides at %x\n",uaa_addr);
+#endif
+
+	writel(uaa_addr,olympic_mmio+LAPA);
+	adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800));
+
+#if OLYMPIC_DEBUG
+	printk("adapter address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+			readb(adapter_addr), readb(adapter_addr+1),readb(adapter_addr+2),
+			readb(adapter_addr+3),readb(adapter_addr+4),readb(adapter_addr+5));
+#endif
+
+	memcpy_fromio(&dev->dev_addr[0], adapter_addr,6);
+
+	olympic_priv->olympic_addr_table_addr = ntohs(readw(init_srb + 12)) ; 
+	olympic_priv->olympic_parms_addr      = ntohs(readw(init_srb + 14)) ; 
+
+	return 0;
+
+}
+
+static int olympic_open(struct device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	__u8 *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
+	unsigned long flags;
+	char open_error[255] ; 
+	int i, open_finished = 1 ;
+
+#if OLYMPIC_NETWORK_MONITOR
+	__u8 *oat ; 
+	__u8 *opt ; 
+#endif
+
+	if(request_irq(dev->irq, &olympic_interrupt, SA_SHIRQ , "olympic", dev)) {
+		return -EAGAIN;
+	}
+
+#if OLYMPIC_DEBUG
+	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+	printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR));
+#endif
+
+	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+
+	writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */
+
+	writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */
+
+	/* adapter is closed, so SRB is pointed to by LAPWWO */
+
+	writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+	init_srb=olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWO)) & (~0xf800));
+	
+#if OLYMPIC_DEBUG
+	printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
+	printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK));
+	printk("Before the open command \n");
+#endif	
+	do {
+		int i;
+
+		save_flags(flags);
+		cli();
+		for(i=0;i<SRB_COMMAND_SIZE;i+=4)
+			writel(0,init_srb+i);
+		if(SRB_COMMAND_SIZE & 2)
+			writew(0,init_srb+(SRB_COMMAND_SIZE & ~3));
+		if(SRB_COMMAND_SIZE & 1)
+			writeb(0,init_srb+(SRB_COMMAND_SIZE & ~1));
+
+		writeb(SRB_OPEN_ADAPTER,init_srb) ; 	/* open */
+		writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2);
+
+		/* If Network Monitor, instruct card to copy MAC frames through the ARB */
+
+#if OLYMPIC_NETWORK_MONITOR
+		writew(ntohs(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON),init_srb+8);
+#else
+		writew(OPEN_ADAPTER_ENABLE_FDX,init_srb+8);
+#endif		
+
+		if (olympic_priv->olympic_laa[0]) {
+			writeb(olympic_priv->olympic_laa[0],init_srb+12);
+			writeb(olympic_priv->olympic_laa[1],init_srb+13);
+			writeb(olympic_priv->olympic_laa[2],init_srb+14);
+			writeb(olympic_priv->olympic_laa[3],init_srb+15);
+			writeb(olympic_priv->olympic_laa[4],init_srb+16);
+			writeb(olympic_priv->olympic_laa[5],init_srb+17);
+			memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ;  
+		} 	
+		writeb(1,init_srb+30);
+	
+		olympic_priv->srb_queued=1;
+
+		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+ 		while(olympic_priv->srb_queued) {        
+        		interruptible_sleep_on_timeout(&olympic_priv->srb_wait, 60*HZ);
+        		if(signal_pending(current))	{            
+				printk(KERN_WARNING "%s: SRB timed out.\n",
+                			dev->name);
+            			printk(KERN_WARNING "SISR=%x MISR=%x\n",
+                			readl(olympic_mmio+SISR),
+                			readl(olympic_mmio+LISR));
+            			olympic_priv->srb_queued=0;
+            			break;
+        		}
+    		}
+		restore_flags(flags);
+#if OLYMPIC_DEBUG
+		printk("init_srb(%p): ",init_srb);
+		for(i=0;i<20;i++)
+			printk("%x ",readb(init_srb+i));
+		printk("\n");
+#endif
+		
+		/* If we get the same return response as we set, the interrupt wasn't raised and the open
+                 * timed out.
+		 */
+
+		if(readb(init_srb+2)== OLYMPIC_CLEAR_RET_CODE) {
+			printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; 
+			return -EIO ; 
+		}	
+
+		if(readb(init_srb+2)!=0) {
+			if (readb(init_srb+2) == 0x07) {  
+				if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */
+					printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name); 
+					open_finished = 0 ;  
+				} else {
+
+					strcpy(open_error, open_maj_error[(readb(init_srb+7) & 0xf0) >> 4]) ; 
+					strcat(open_error," - ") ; 
+					strcat(open_error, open_min_error[(readb(init_srb+7) & 0x0f)]) ;
+
+					if (!olympic_priv->olympic_ring_speed && ((readb(init_srb+7) & 0x0f) == 0x0d)) { 
+						printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name);
+						printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name);
+						free_irq(dev->irq, dev);
+						return -EIO ;
+					}
+
+					printk(KERN_WARNING "%s: %s\n",dev->name,open_error);
+					free_irq(dev->irq,dev) ; 
+					return -EIO ; 
+ 
+				}	/* if autosense && open_finished */
+			} else {  
+				printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name,init_srb[2]);
+				free_irq(dev->irq, dev);
+				return -EIO;
+			} 
+		} else 
+			open_finished = 1 ; 
+	} while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */	
+
+	if (readb(init_srb+18) & (1<<3)) 
+		if (olympic_priv->olympic_message_level) 
+			printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name);
+
+	if (readb(init_srb+18) & (1<<1))
+		olympic_priv->olympic_ring_speed = 100 ; 
+	else if (readb(init_srb+18) & 1)
+		olympic_priv->olympic_ring_speed = 16 ; 
+	else
+		olympic_priv->olympic_ring_speed = 4 ; 
+
+	if (olympic_priv->olympic_message_level) 
+		printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed);
+
+	olympic_priv->asb=ntohs(readw(init_srb+8));
+	olympic_priv->srb=ntohs(readw(init_srb+10));
+	olympic_priv->arb=ntohs(readw(init_srb+12));
+	olympic_priv->trb=ntohs(readw(init_srb+16));
+
+	olympic_priv->olympic_receive_options = 0x01 ; 
+	olympic_priv->olympic_copy_all_options = 0 ; 
+	
+	/* setup rx ring */
+	
+	writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ 
+
+	writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */
+
+	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+
+		struct sk_buff *skb;
+		
+		skb=dev_alloc_skb(olympic_priv->pkt_buf_sz);
+		if(skb == NULL)
+			break;
+
+		skb->dev = dev;
+
+		olympic_priv->olympic_rx_ring[i].buffer=virt_to_bus(skb->data);
+		olympic_priv->olympic_rx_ring[i].res_length = olympic_priv->pkt_buf_sz ; 
+		olympic_priv->rx_ring_skb[i]=skb;
+	}
+
+	if (i==0) {
+		printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
+		free_irq(dev->irq, dev);
+		return -EIO;
+	}
+
+	writel(virt_to_bus(&olympic_priv->olympic_rx_ring[0]),olympic_mmio+RXDESCQ);
+	writel(virt_to_bus(&olympic_priv->olympic_rx_ring[0]),olympic_mmio+RXCDA);
+	writew(i,olympic_mmio+RXDESCQCNT);
+		
+	writel(virt_to_bus(&olympic_priv->olympic_rx_status_ring[0]),olympic_mmio+RXSTATQ);
+	writel(virt_to_bus(&olympic_priv->olympic_rx_status_ring[0]),olympic_mmio+RXCSA);
+	
+ 	olympic_priv->rx_ring_last_received=OLYMPIC_RX_RING_SIZE-1;	/* last processed rx status */
+	olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE-1;  
+
+	writew(i,olympic_mmio+RXSTATQCNT);
+
+#if OLYMPIC_DEBUG 
+	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+	printk("RXCSA: %x, rx_status_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCSA)),&olympic_priv->olympic_rx_status_ring[0]);
+	printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) );
+	printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) );
+	printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7])  );
+
+	printk("RXCDA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCDA)),&olympic_priv->olympic_rx_ring[0]);
+#endif
+
+	writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ);
+
+#if OLYMPIC_DEBUG 
+	printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ));
+	printk("RXCSA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCSA)),&olympic_priv->olympic_rx_status_ring[0]);
+	printk("RXCDA: %x, rx_ring[0]: %p\n",bus_to_virt(readl(olympic_mmio+RXCDA)),&olympic_priv->olympic_rx_ring[0]);
+#endif 
+
+	writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM);
+
+	/* setup tx ring */
+
+	writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */
+	for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) 
+		olympic_priv->olympic_tx_ring[i].buffer=0xdeadbeef;
+
+	olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE;
+	writel(virt_to_bus(&olympic_priv->olympic_tx_ring[0]),olympic_mmio+TXDESCQ_1);
+	writel(virt_to_bus(&olympic_priv->olympic_tx_ring[0]),olympic_mmio+TXCDA_1);
+	writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXDESCQCNT_1);
+	
+	writel(virt_to_bus(&olympic_priv->olympic_tx_status_ring[0]),olympic_mmio+TXSTATQ_1);
+	writel(virt_to_bus(&olympic_priv->olympic_tx_status_ring[0]),olympic_mmio+TXCSA_1);
+	writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1);
+		
+	olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */
+	olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */
+
+	writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE,olympic_mmio+SISR_MASK_SUM);
+
+#if OLYMPIC_DEBUG 
+	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
+	printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK));
+#endif
+
+#if OLYMPIC_NETWORK_MONITOR
+	oat = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; 
+	opt = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; 
+
+	printk("%s: Node Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, 
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), 
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5));
+	printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, 
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), 
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+		    readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+
+	printk("%s: NAUN Address: %02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, 
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+			readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5));
+
+
+#endif 	
+	
+	dev->start = 1;
+	dev->interrupt=0;
+	dev->tbusy=0;
+
+	MOD_INC_USE_COUNT ;
+	return 0;
+	
+}	
+
+/*
+ *	When we enter the rx routine we do not know how many frames have been 
+ *	queued on the rx channel.  Therefore we start at the next rx status
+ *	position and travel around the receive ring until we have completed
+ *	all the frames.
+ *
+ *	This means that we may process the frame before we receive the end
+ *	of frame interrupt. This is why we always test the status instead
+ *	of blindly processing the next frame.
+ *	
+ */
+static void olympic_rx(struct device *dev)
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	__u8 *olympic_mmio=olympic_priv->olympic_mmio;
+	struct olympic_rx_status *rx_status;
+	struct olympic_rx_desc *rx_desc ; 
+	int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len;
+	struct sk_buff *skb, *skb2;
+	int i;
+
+	rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; 
+ 
+	while (rx_status->status_buffercnt) { 
+
+		olympic_priv->rx_status_last_received++ ;
+		olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+#if OLYMPIC_DEBUG
+		printk(" stat_ring addr: %x \n", &(olympic_priv->olympic_rx_status_ring[olympic_priv->rx_status_last_received]) ); 
+		printk("rx status: %x rx len: %x \n",rx_status->status_buffercnt,rx_status->fragmentcnt_framelen);	
+#endif
+		length=rx_status->fragmentcnt_framelen & 0xffff;
+		buffer_cnt = rx_status->status_buffercnt & 0xffff ; 
+		i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ 
+		frag_len = rx_status->fragmentcnt_framelen >> 16 ; 
+
+#if OLYMPIC_DEBUG 
+		printk("length: %x, frag_len: %x, buffer_cnt: %x\n",length,frag_len,buffer_cnt);
+#endif
+
+		if(rx_status->status_buffercnt & 0xC0000000) {
+			if (rx_status->status_buffercnt & 0x3B000000) {
+				if (olympic_priv->olympic_message_level) {
+					if (rx_status->status_buffercnt & (1<<29))  /* Rx Frame Truncated */
+						printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name);
+					if (rx_status->status_buffercnt & (1<<28)) /*Rx receive overrun */
+						printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name);
+					if (rx_status->status_buffercnt & (1<<27)) /* No receive buffers */
+						printk(KERN_WARNING "%s: No receive buffers \n",dev->name);
+					if (rx_status->status_buffercnt & (1<<25)) /* Receive frame error detect */
+						printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name);
+					if (rx_status->status_buffercnt & (1<<24)) /* Received Error Detect */
+						printk(KERN_WARNING "%s: Received Error Detect \n",dev->name);
+				} 
+				olympic_priv->rx_ring_last_received += i ; 
+				olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; 
+				olympic_priv->olympic_stats.rx_errors++;	 
+			} else {	
+			
+				if (buffer_cnt == 1) {
+					skb = dev_alloc_skb(olympic_priv->pkt_buf_sz) ; 
+				} else {
+					skb = dev_alloc_skb(length) ; 
+				}
+
+				if (skb == NULL) {
+					printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ;
+					olympic_priv->olympic_stats.rx_dropped++ ; 
+					/* Update counters even though we don't transfer the frame */
+					olympic_priv->rx_ring_last_received += i ; 
+					olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;  
+				} else  {
+					skb->dev = dev ; 
+
+					/* Optimise based upon number of buffers used. 
+			   	   	   If only one buffer is used we can simply swap the buffers around.
+			   	   	   If more than one then we must use the new buffer and copy the information
+			   	   	   first. Ideally all frames would be in a single buffer, this can be tuned by
+                               	   	   altering the buffer size. */
+				
+ 					if (buffer_cnt==1) {
+						olympic_priv->rx_ring_last_received++ ; 
+						olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+						rx_ring_last_received = olympic_priv->rx_ring_last_received ;
+						skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; 
+						skb_put(skb2,length);
+						skb2->protocol = tr_type_trans(skb2,dev);
+						olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer=virt_to_bus(skb->data);
+						olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = olympic_priv->pkt_buf_sz ; 
+						olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; 
+						netif_rx(skb2) ; 
+					} else {
+						do { /* Walk the buffers */ 
+							olympic_priv->rx_ring_last_received++ ; 
+							olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1);
+							rx_ring_last_received = olympic_priv->rx_ring_last_received ; 
+							rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]);
+							cpy_length = (i == 1 ? frag_len : rx_desc->res_length); 
+							memcpy(skb_put(skb, cpy_length), bus_to_virt(rx_desc->buffer), cpy_length) ; 
+						} while (--i) ; 
+		
+						skb->protocol = tr_type_trans(skb,dev);
+						netif_rx(skb) ; 
+					} 
+					olympic_priv->olympic_stats.rx_packets++ ; 
+					olympic_priv->olympic_stats.rx_bytes += length ; 
+				} /* if skb == null */
+			} /* If status & 0x3b */
+
+		} else { /*if buffercnt & 0xC */
+			olympic_priv->rx_ring_last_received += i ; 
+			olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; 
+		} 
+
+		rx_status->fragmentcnt_framelen = 0 ; 
+		rx_status->status_buffercnt = 0 ; 
+		rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]);
+
+		writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) |  buffer_cnt , olympic_mmio+RXENQ); 
+	} /* while */
+
+}
+
+static void olympic_interrupt(int irq, void *dev_id, struct pt_regs *regs) 
+{
+	struct device *dev= (struct device *)dev_id;
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	__u8 *olympic_mmio=olympic_priv->olympic_mmio;
+	__u32 sisr;
+	__u8 *adapter_check_area ; 
+	
+	sisr=readl(olympic_mmio+SISR_RR) ; /* Reset sisr */ 
+	
+	if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ 
+		return ;
+
+	if (dev->interrupt) 
+		printk(KERN_WARNING "%s: Re-entering interrupt \n",dev->name) ; 
+
+	dev->interrupt = 1 ; 
+
+	if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK |  
+			SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF)) {  
+	
+		if(sisr & SISR_SRB_REPLY) {
+			if(olympic_priv->srb_queued==1) {
+				wake_up_interruptible(&olympic_priv->srb_wait);
+			} else if (olympic_priv->srb_queued==2) { 
+				olympic_srb_bh(dev) ; 
+			}
+			olympic_priv->srb_queued=0;
+		} /* SISR_SRB_REPLY */
+
+		if (sisr & SISR_TX1_EOF) {
+			olympic_priv->tx_ring_last_status++;
+			olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1);
+			olympic_priv->free_tx_ring_entries++;
+			olympic_priv->olympic_stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len;
+			olympic_priv->olympic_stats.tx_packets++ ; 
+			dev_kfree_skb(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]);
+			olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=0xdeadbeef;
+			olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0;
+
+			if(dev->tbusy) {
+				dev->tbusy=0;
+				mark_bh(NET_BH);
+			}
+		} /* SISR_TX1_EOF */
+	
+		if (sisr & SISR_RX_STATUS) {
+			olympic_rx(dev);
+		} /* SISR_RX_STATUS */
+	
+		if (sisr & SISR_ADAPTER_CHECK) {
+			printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name);
+			writel(readl(olympic_mmio+LAPWWO),olympic_mmio+LAPA);
+			adapter_check_area = (__u8 *)(olympic_mmio+LAPWWO) ; 
+			printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; 
+			dev->interrupt = 0  ; 	
+			free_irq(dev->irq, dev) ; 
+	
+		} /* SISR_ADAPTER_CHECK */
+	
+		if (sisr & SISR_ASB_FREE) {
+			/* Wake up anything that is waiting for the asb response */  
+			if (olympic_priv->asb_queued) {
+				olympic_asb_bh(dev) ; 
+			}
+		} /* SISR_ASB_FREE */
+	
+		if (sisr & SISR_ARB_CMD) {
+			olympic_arb_cmd(dev) ; 
+		} /* SISR_ARB_CMD */
+	
+		if (sisr & SISR_TRB_REPLY) {
+			/* Wake up anything that is waiting for the trb response */
+			if (olympic_priv->trb_queued) {
+				wake_up_interruptible(&olympic_priv->trb_wait);
+			}
+			olympic_priv->trb_queued = 0 ; 
+		} /* SISR_TRB_REPLY */	
+	
+		if (sisr & SISR_RX_NOBUF) {
+			/* According to the documentation, we don't have to do anything, but trapping it keeps it out of
+                  	   	   /var/log/messages.  */
+		} /* SISR_RX_NOBUF */
+	} else { 
+		printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr);
+		printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ;
+	} /* One if the interrupts we want */
+
+	dev->interrupt = 0 ;  
+
+	writel(SISR_MI,olympic_mmio+SISR_MASK_SUM);
+
+}	
+
+static int olympic_xmit(struct sk_buff *skb, struct device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+    __u8 *olympic_mmio=olympic_priv->olympic_mmio;
+
+	if (test_and_set_bit(0, (void*)&dev->tbusy) != 0) {
+		return 1;
+	}
+
+	if(olympic_priv->free_tx_ring_entries) {
+		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer=virt_to_bus(skb->data);
+		olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length=skb->len | (0x80000000);
+		olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb;
+		olympic_priv->free_tx_ring_entries--;
+
+        	olympic_priv->tx_ring_free++;
+        	olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1);
+
+
+		writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1);
+
+		dev->tbusy=0;		
+
+		return 0;
+	} else 
+		return 1;
+
+}
+	
+
+static int olympic_close(struct device *dev) 
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+    	__u8 *olympic_mmio=olympic_priv->olympic_mmio,*srb;
+	unsigned long flags;
+	int i;
+
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+	
+    	writeb(SRB_CLOSE_ADAPTER,srb+0);
+	writeb(0,srb+1);
+	writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+
+	save_flags(flags);
+	cli();	
+
+	olympic_priv->srb_queued=1;
+
+	writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+	while(olympic_priv->srb_queued) {
+	        interruptible_sleep_on_timeout(&olympic_priv->srb_wait, jiffies+60*HZ);
+        	if(signal_pending(current))	{            
+			printk(KERN_WARNING "%s: SRB timed out.\n",
+                		dev->name);
+            		printk(KERN_WARNING "SISR=%x MISR=%x\n",
+                	readl(olympic_mmio+SISR),
+                	readl(olympic_mmio+LISR));
+            		olympic_priv->srb_queued=0;
+            		break;
+        	}
+    	}
+
+	restore_flags(flags) ; 
+	olympic_priv->rx_status_last_received++;
+	olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+	
+	for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) {
+		dev_kfree_skb(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]);
+		olympic_priv->rx_status_last_received++;
+		olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1;
+	}
+
+	/* reset tx/rx fifo's and busmaster logic */
+
+	writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+	udelay(1);
+	writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+
+#if OLYMPIC_DEBUG
+	printk("srb(%p): ",srb);
+	for(i=0;i<4;i++)
+		printk("%x ",readb(srb+i));
+	printk("\n");
+#endif
+    	dev->start = 0;
+	free_irq(dev->irq,dev);
+
+	MOD_DEC_USE_COUNT ; 
+	return 0;
+	
+}
+
+static void olympic_set_rx_mode(struct device *dev) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+   	__u8 *olympic_mmio = olympic_priv->olympic_mmio ; 
+	__u8 options = 0, set_mc_list = 0 ; 
+	__u8 *srb, *ata ;
+	struct dev_mc_list *dmi ; 
+
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+	options = olympic_priv->olympic_copy_all_options; 
+
+	if (dev->flags&IFF_PROMISC)  
+		options |= (3<<5) ; /* All LLC and MAC frames, all through the main rx channel */  
+	else
+		options &= ~(3<<5) ; 
+
+	if (dev->mc_count) {  
+		set_mc_list = 1 ; 
+	}
+
+	/* Only issue the srb if there is a change in options */
+
+	if ((options ^ olympic_priv->olympic_copy_all_options)) { 
+	
+		/* Now to issue the srb command to alter the copy.all.options */
+	
+		writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb);
+		writeb(0,srb+1);
+		writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+		writeb(0,srb+3);
+		writeb(olympic_priv->olympic_receive_options,srb+4);
+		writeb(options,srb+5);
+
+		olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+		writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+		olympic_priv->olympic_copy_all_options = options ;
+		
+		return ;  
+	} 
+
+	if (set_mc_list ^ olympic_priv->olympic_multicast_set) { /* Multicast options have changed */ 
+
+		dmi = dev->mc_list ; 
+
+		if (set_mc_list) { /* Turn multicast on */
+
+			/* RFC 1469 Says we must support using the functional address C0 00 00 04 00 00
+                         * We do this with a set functional address mask.
+			 */
+						
+			ata=olympic_priv->olympic_lap + (olympic_priv->olympic_addr_table_addr) ;
+			if (!(readb(ata+11) & 0x04)) { /* Hmmm, need to set the functional mask */ 
+				writeb(SRB_SET_FUNC_ADDRESS,srb+0);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				writeb(0,srb+4);
+				writeb(0,srb+5);
+				writeb(readb(ata+10),srb+6);
+				writeb(readb(ata+11)|4,srb+7);
+				writeb(readb(ata+12),srb+8);
+				writeb(readb(ata+13),srb+9);
+			
+				olympic_priv->srb_queued = 2 ; 
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+				olympic_priv->olympic_multicast_set = 1 ;  
+			}    
+
+
+		} else { /* Turn multicast off */
+	
+			ata=olympic_priv->olympic_lap + (olympic_priv->olympic_addr_table_addr) ;
+			if ((readb(ata+11) & 0x04)) { /* Hmmm, need to reset the functional mask */ 
+				writeb(SRB_SET_FUNC_ADDRESS,srb+0);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				writeb(0,srb+4);
+				writeb(0,srb+5);
+				writeb(readb(ata+10),srb+6);
+				writeb(readb(ata+11) & ~4,srb+7);
+				writeb(readb(ata+12),srb+8);
+				writeb(readb(ata+13),srb+9);
+			
+				olympic_priv->srb_queued = 2 ; 
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);	
+
+				olympic_priv->olympic_multicast_set = 0 ; 
+			}
+		} 		
+
+	}
+
+
+}
+
+static void olympic_srb_bh(struct device *dev) 
+{ 
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+   	__u8 *olympic_mmio = olympic_priv->olympic_mmio ; 
+	__u8 *srb;
+
+	writel(olympic_priv->srb,olympic_mmio+LAPA);
+	srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800));
+
+	switch (readb(srb)) { 
+
+		/* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) 
+                 * At some point we should do something if we get an error, such as
+                 * resetting the IFF_PROMISC flag in dev
+		 */
+
+		case SRB_MODIFY_RECEIVE_OPTIONS:
+			switch (readb(srb+2)) { 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
+					break ; 
+				default:
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; 
+					break ; 	
+			} /* switch srb[2] */ 
+			break ;
+		
+		/* SRB_SET_GROUP_ADDRESS - Multicast group setting 
+                 */
+
+		case SRB_SET_GROUP_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					olympic_priv->olympic_multicast_set = 1 ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ;
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); 
+					break ;
+				case 0x3c:
+					printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; 
+					break ;
+				case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */
+					printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; 
+					break ;  
+				case 0x55:
+					printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; 
+					break ;
+				default:
+					break ; 
+			} /* switch srb[2] */ 
+			break ; 
+
+		/* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list
+ 		 */
+
+		case SRB_RESET_GROUP_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					olympic_priv->olympic_multicast_set = 0 ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				case 0x39: /* Must deal with this if individual multicast addresses used */
+					printk(KERN_INFO "%s: Group address not found \n",dev->name); 
+					break ;
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ; 
+
+		
+		/* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode 
+		 */
+
+		case SRB_SET_FUNC_ADDRESS:
+			switch (readb(srb+2)) { 
+				case 0x00:
+					if (olympic_priv->olympic_message_level)
+						printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ; 
+					break ;
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ; 
+	
+		/* SRB_READ_LOG - Read and reset the adapter error counters
+ 		 */
+
+		case SRB_READ_LOG:
+			switch (readb(srb+2)) { 
+				case 0x00: 
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+			
+			} /* switch srb[2] */
+			break ; 
+		
+		/* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */
+
+		case SRB_READ_SR_COUNTERS:
+			switch (readb(srb+2)) { 
+				case 0x00: 
+					if (olympic_priv->olympic_message_level) 
+						printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; 
+					break ; 
+				case 0x01:
+					printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ; 
+					break ; 
+				case 0x04:
+					printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; 
+					break ; 
+				default:
+					break ; 
+			} /* switch srb[2] */
+			break ;
+ 
+		default:
+			printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name);
+			break ; 
+	} /* switch srb[0] */
+
+} 
+
+static struct net_device_stats * olympic_get_stats(struct device *dev)
+{
+	struct olympic_private *olympic_priv ;
+	olympic_priv=(struct olympic_private *) dev->priv;
+	return (struct net_device_stats *) &olympic_priv->olympic_stats; 
+}
+
+static int olympic_set_mac_address (struct device *dev, void *addr) 
+{
+	struct sockaddr *saddr = addr ; 
+	struct olympic_private *olympic_priv = (struct olympic_private *)dev->priv ; 
+
+	if (dev->start) { 
+		printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; 
+		return -EIO ; 
+	}
+
+	memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; 
+	
+	if (olympic_priv->olympic_message_level) { 
+ 		printk(KERN_INFO "%s: MAC/LAA Set to  = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0],
+		olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2],
+		olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4],
+		olympic_priv->olympic_laa[5]);
+	} 
+
+	return 0 ; 
+}
+
+static void olympic_arb_cmd(struct device *dev)
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+    	__u8 *olympic_mmio=olympic_priv->olympic_mmio;
+	__u8 *arb_block, *asb_block, *srb  ; 
+	__u8 header_len ; 
+	__u16 frame_len, buffer_len ;
+	struct sk_buff *mac_frame ;  
+	__u8 *buf_ptr ;
+	__u8 *frame_data ;  
+	__u16 buff_off ; 
+	__u16 lan_status = 0, lan_status_diff  ; /* Initialize to stop compiler warning */
+	__u8 fdx_prot_error ; 
+	__u16 next_ptr;
+
+#if OLYMPIC_NETWORK_MONITOR
+	struct trh_hdr *mac_hdr ; 
+#endif
+
+	arb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->arb) ; 
+	asb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->asb) ; 
+	srb = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->srb) ; 
+	writel(readl(olympic_mmio+LAPA),olympic_mmio+LAPWWO);
+
+	if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */
+
+		header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */	
+		frame_len = ntohs(readw(arb_block + 10)) ; 
+
+		buff_off = ntohs(readw(arb_block + 6)) ;
+		
+		buf_ptr = olympic_priv->olympic_lap + buff_off ; 
+
+#if OLYMPIC_DEBUG
+{
+		int i;
+		frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; 
+
+		for (i=0 ;  i < 14 ; i++) { 
+			printk("Loc %d = %02x\n",i,readb(frame_data + i)); 
+		}
+
+		printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); 
+}
+#endif 
+		mac_frame = dev_alloc_skb(frame_len) ; 
+
+		/* Walk the buffer chain, creating the frame */
+
+		do {
+			frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; 
+			buffer_len = ntohs(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); 
+			memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ;
+			next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); 
+
+		} while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr)));
+
+#if OLYMPIC_NETWORK_MONITOR
+		printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name) ;
+		mac_hdr = (struct trh_hdr *)mac_frame->data ; 
+		printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->daddr[0], mac_hdr->daddr[1], mac_hdr->daddr[2], mac_hdr->daddr[3], mac_hdr->daddr[4], mac_hdr->daddr[5]) ; 
+		printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %02x:%02x:%02x:%02x:%02x:%02x \n", dev->name , mac_hdr->saddr[0], mac_hdr->saddr[1], mac_hdr->saddr[2], mac_hdr->saddr[3], mac_hdr->saddr[4], mac_hdr->saddr[5]) ; 
+#endif
+		mac_frame->dev = dev ; 
+		mac_frame->protocol = tr_type_trans(mac_frame,dev);
+		netif_rx(mac_frame) ; 	
+
+		/* Now tell the card we have dealt with the received frame */
+
+		/* Set LISR Bit 1 */
+		writel(LISR_ARB_FREE,olympic_priv->olympic_lap + LISR_SUM);
+
+		/* Is the ASB free ? */ 	
+		
+		if (!(readl(olympic_priv->olympic_mmio + SISR) & SISR_ASB_FREE)) {
+			olympic_priv->asb_queued = 1 ; 
+			writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); 
+			return ; 	
+			/* Drop out and wait for the bottom half to be run */
+		}
+		
+		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		
+
+		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+		
+		olympic_priv->asb_queued = 2 ; 
+	
+		return ; 	
+		
+	} else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */
+		lan_status = readw(arb_block+6);
+		fdx_prot_error = readb(arb_block+8) ; 
+		
+		/* Issue ARB Free */
+		writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM);
+
+		lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; 
+
+		if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { 
+			if (lan_status_diff & LSC_LWF) 
+					printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name);
+			if (lan_status_diff & LSC_ARW) 
+					printk(KERN_WARNING "%s: Auto removal error\n",dev->name);
+			if (lan_status_diff & LSC_FPE)
+					printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name);
+			if (lan_status_diff & LSC_RR) 
+					printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name);
+		
+			/* Adapter has been closed by the hardware */
+		
+			/* reset tx/rx fifo's and busmaster logic */
+
+			writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL);
+			udelay(1);
+			writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
+			dev->tbusy = 1 ;
+			dev->interrupt = 1 ; 
+			dev->start = 0 ; 
+			olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; 
+			free_irq(dev->irq,dev);
+			
+			printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ; 
+	
+		} /* If serious error */
+		
+		if (olympic_priv->olympic_message_level) { 
+			if (lan_status_diff & LSC_SIG_LOSS) 
+					printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ; 
+			if (lan_status_diff & LSC_HARD_ERR)
+					printk(KERN_INFO "%s: Beaconing \n",dev->name);
+			if (lan_status_diff & LSC_SOFT_ERR)
+					printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+			if (lan_status_diff & LSC_TRAN_BCN) 
+					printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+			if (lan_status_diff & LSC_SS) 
+					printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+			if (lan_status_diff & LSC_RING_REC)
+					printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
+			if (lan_status_diff & LSC_FDX_MODE)
+					printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name);
+		} 	
+		
+		if (lan_status_diff & LSC_CO) { 
+					
+				if (olympic_priv->olympic_message_level) 
+					printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+					
+				/* Issue READ.LOG command */
+
+				writeb(SRB_READ_LOG, srb);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				writeb(0,srb+4);
+				writeb(0,srb+5);
+					
+				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+					
+		}
+
+		if (lan_status_diff & LSC_SR_CO) { 
+
+				if (olympic_priv->olympic_message_level)
+					printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name);
+
+				/* Issue a READ.SR.COUNTERS */
+				
+				writeb(SRB_READ_SR_COUNTERS,srb);
+				writeb(0,srb+1);
+				writeb(OLYMPIC_CLEAR_RET_CODE,srb+2);
+				writeb(0,srb+3);
+				
+				olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */
+
+				writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM);
+
+		}
+
+		olympic_priv->olympic_lan_status = lan_status ; 
+	
+	}  /* Lan.change.status */
+	else
+		printk(KERN_WARNING "%s: Unknown arb command \n", dev->name);
+}
+
+static void olympic_asb_bh(struct device *dev) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv ; 
+	__u8 *arb_block, *asb_block ; 
+
+	arb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->arb) ; 
+	asb_block = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->asb) ; 
+
+	if (olympic_priv->asb_queued == 1) {   /* Dropped through the first time */
+
+		writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */
+		writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */
+		writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */
+		writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */		
+
+		writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM);
+		olympic_priv->asb_queued = 2 ; 
+
+		return ; 
+	}
+
+	if (olympic_priv->asb_queued == 2) { 
+		switch (readb(asb_block+2)) {
+			case 0x01:
+				printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name);
+				break ;
+			case 0x26:
+				printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name);
+				break ;
+			case 0xFF:
+				/* Valid response, everything should be ok again */
+				break ;
+			default:
+				printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name);
+				break ;
+		}
+	}
+	olympic_priv->asb_queued = 0 ; 
+}
+ 
+static int olympic_change_mtu(struct device *dev, int mtu) 
+{
+	struct olympic_private *olympic_priv = (struct olympic_private *) dev->priv;
+	__u16 max_mtu ; 
+
+	if (olympic_priv->olympic_ring_speed == 4)
+		max_mtu = 4500 ; 
+	else
+		max_mtu = 18000 ; 
+	
+	if (mtu > max_mtu)
+		return -EINVAL ; 
+	if (mtu < 100) 
+		return -EINVAL ; 
+
+	dev->mtu = mtu ; 
+	olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; 
+
+	return 0 ; 
+}
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+static int olympic_proc_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+{
+	struct pci_dev *pci_device = NULL ;
+	int len=0;
+	off_t begin=0;
+	off_t pos=0;
+	int size;
+	
+	struct device *dev;
+
+
+	size = sprintf(buffer, 
+		"IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapters\n");
+	
+	pos+=size;
+	len+=size;
+	
+
+	while((pci_device=pci_find_device(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR_WAKE, pci_device))) {
+	
+		for (dev = dev_base; dev != NULL; dev = dev->next) 
+		{
+			if (dev->base_addr == (pci_device->base_address[0] & (~3)) ) { /* Yep, an Olympic device */	
+				size = sprintf_info(buffer+len, dev);
+				len+=size;
+				pos=begin+len;
+				
+				if(pos<offset)
+				{
+					len=0;
+					begin=pos;
+				}
+				if(pos>offset+length)
+					break;
+			} /* if */
+		} /* for */
+	} /* While */
+
+	*start=buffer+(offset-begin);	/* Start of wanted data */
+	len-=(offset-begin);		/* Start slop */
+	if(len>length)
+		len=length;		/* Ending slop */
+	return len;
+}
+
+static int sprintf_info(char *buffer, struct device *dev)
+{
+	struct olympic_private *olympic_priv=(struct olympic_private *)dev->priv;
+	__u8 *oat = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; 
+	__u8 *opt = (__u8 *)(olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; 
+	int size = 0 ; 
+		
+	size = sprintf(buffer, "\n%6s: Adapter Address   : Node Address      : Functional Addr\n",
+ 	   dev->name); 
+
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x\n",
+	   dev->name,
+           dev->dev_addr[0],
+	   dev->dev_addr[1],
+	   dev->dev_addr[2],
+ 	   dev->dev_addr[3],
+	   dev->dev_addr[4],
+	   dev->dev_addr[5],
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)), 
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+1),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+2),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+3),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+4),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+5),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), 
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2),
+	   readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3));
+	 
+	size += sprintf(buffer+size, "\n%6s: Token Ring Parameters Table:\n", dev->name);
+
+	size += sprintf(buffer+size, "%6s: Physical Addr : Up Node Address   : Poll Address      : AccPri : Auth Src : Att Code :\n",
+	  dev->name) ; 
+	   
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x   : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x:%02x:%02x : %04x   : %04x     :  %04x    :\n",
+	  dev->name,
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+5),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, poll_addr)+5),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, att_code))));
+
+	size += sprintf(buffer+size, "%6s: Source Address    : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n",
+	  dev->name) ; 
+	
+	size += sprintf(buffer+size, "%6s: %02x:%02x:%02x:%02x:%02x:%02x : %04x  : %04x   : %04x   : %04x   : %04x    :     %04x     : \n",
+	  dev->name,
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, source_addr)+5),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, major_vector))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, lan_status))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, local_ring))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, mon_error))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, frame_correl))));
+
+	size += sprintf(buffer+size, "%6s: Beacon Details :  Tx  :  Rx  : NAUN Node Address : NAUN Node Phys : \n",
+	  dev->name) ; 
+
+	size += sprintf(buffer+size, "%6s:                :  %02x  :  %02x  : %02x:%02x:%02x:%02x:%02x:%02x : %02x:%02x:%02x:%02x    : \n",
+	  dev->name,
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))),
+	  ntohs(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+3),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+4),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_naun)+5),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2),
+	  readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3));
+
+ 
+	return size;
+}
+#endif
+#endif 
+
+#ifdef MODULE
+
+static struct device* dev_olympic[OLYMPIC_MAX_ADAPTERS];
+
+int init_module(void)
+{
+        int i;
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *ent ; 
+
+	ent = create_proc_entry("net/olympic_tr",0,0); 
+	ent->read_proc = &olympic_proc_info ; 
+#endif
+#endif
+        for (i = 0; (i<OLYMPIC_MAX_ADAPTERS); i++) {
+		dev_olympic[i] = NULL;
+                dev_olympic[i] = init_trdev(dev_olympic[i], 0);
+                if (dev_olympic[i] == NULL)
+                        return -ENOMEM;
+
+		dev_olympic[i]->init      = &olympic_probe;
+
+	        if (register_trdev(dev_olympic[i]) != 0) {
+			kfree_s(dev_olympic[i], sizeof(struct device));
+			dev_olympic[i] = NULL;
+		        if (i == 0) {
+			        printk("Olympic: No IBM PCI Token Ring cards found in system.\n");
+		                return -EIO;
+			} else {
+			       	printk("Olympic: %d IBM PCI Token Ring card(s) found in system.\n",i) ; 
+				return 0;
+			}
+	        }
+	}
+
+	return 0;
+}
+
+void cleanup_module(void)
+{
+        int i;
+
+        for (i = 0; i < OLYMPIC_MAX_ADAPTERS; i++)
+	        if (dev_olympic[i]) {
+			 unregister_trdev(dev_olympic[i]);
+			 release_region(dev_olympic[i]->base_addr, OLYMPIC_IO_SPACE);
+			 kfree_s(dev_olympic[i]->priv, sizeof(struct olympic_private));
+			 kfree_s(dev_olympic[i], sizeof(struct device));
+			 dev_olympic[i] = NULL;
+                }
+
+#if OLYMPIC_NETWORK_MONITOR
+#ifdef CONFIG_PROC_FS
+	remove_proc_entry("net/olympic_tr", NULL) ; 
+#endif 
+#endif
+}
+#endif /* MODULE */
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)