patch-2.2.19 linux/drivers/isdn/eicon/divas.h

• Lines: 230
• Date: Sun Mar 25 11:37:32 2001
• Orig file: v2.2.18/drivers/isdn/eicon/divas.h
• Orig date: Wed Dec 31 19:00:00 1969

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.18/drivers/isdn/eicon/divas.h linux/drivers/isdn/eicon/divas.h
@@ -0,0 +1,229 @@
+
+/*
+ *
+ * Copyright (C) Eicon Technology Corporation, 2000.
+ *
+ * Eicon File Revision :    1.5  
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY 
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+/* External Diva Server driver include file */
+
+#if !defined(DIVAS_H)
+#define DIVAS_H
+
+#include "sys.h"
+
+
+/* IOCTL commands */
+
+#define	DIA_IOCTL_INIT				(0)
+#define	DIA_IOCTL_LOAD				(1)
+#define	DIA_IOCTL_CONFIG			(2)
+#define	DIA_IOCTL_START				(3)
+#define	DIA_IOCTL_GET_NUM			(4)
+#define	DIA_IOCTL_GET_LIST			(5)
+#define	DIA_IOCTL_LOG				(6)
+#define	DIA_IOCTL_DETECT			(7)
+#define	DIA_IOCTL_SPACE				(8)
+#define DIA_IOCTL_GET_MEM           (9)
+#define DIA_IOCTL_FLAVOUR			(10)
+#define	DIA_IOCTL_XLOG_REQ			(11)
+
+/* Error codes */
+
+#define XLOG_ERR_CARD_NUM	(13)
+#define XLOG_ERR_DONE		(14)
+#define XLOG_ERR_CMD		(15)
+#define XLOG_ERR_TIMEOUT	(16)
+#define XLOG_ERR_CARD_STATE	(17)
+#define XLOG_ERR_UNKNOWN	(18)
+#define XLOG_OK 			(0)
+
+/* Adapter states */
+
+#define DIA_UNKNOWN		(0)
+#define DIA_RESET		(1)
+#define DIA_LOADED		(2)
+#define DIA_CONFIGURED	(3)
+#define DIA_RUNNING		(4)
+
+/* Stucture for getting card specific information from active cad driver */
+
+typedef struct
+{
+	int card_type;
+	int card_slot;
+	int	state;
+} dia_card_list_t;
+
+/* use following to select which logging to have active */
+
+#define	DIVAS_LOG_DEBUG		(1 << 0)
+#define	DIVAS_LOG_XLOG		(1 << 1)
+#define	DIVAS_LOG_IDI		(1 << 2)
+#define	DIVAS_LOG_CAPI		(1 << 3)
+
+/* stucture for DIA_IOCTL_LOG to get information from adapter */
+
+typedef struct
+{
+	int		card_id;
+	int		log_types;	/* bit mask of log types: use DIVAS_LOG_XXX */
+} dia_log_t;
+
+/* list of cards supported by this driver */
+
+#define	DIA_CARD_TYPE_DIVA_SERVER	(0)	/* Diva Server PRI */
+#define	DIA_CARD_TYPE_DIVA_SERVER_B	(1)	/* Diva Server BRI */
+#define	DIA_CARD_TYPE_DIVA_SERVER_Q	(2)	/* Diva Server 4-BRI */
+
+/* bus types */
+
+#define	DIA_BUS_TYPE_ISA		(0)
+#define	DIA_BUS_TYPE_ISA_PNP	(1)
+#define	DIA_BUS_TYPE_PCI		(2)
+#define	DIA_BUS_TYPE_MCA		(3)
+
+/* types of memory used (index for memory array below) */
+
+#define DIVAS_RAM_MEMORY 	0
+#define DIVAS_REG_MEMORY 	1
+#define DIVAS_CFG_MEMORY 	2
+#define DIVAS_SHARED_MEMORY 3
+#define DIVAS_CTL_MEMORY	4
+/*
+ * card config information
+ * passed as parameter to DIA_IOCTL_INIT ioctl to initialise new card
+ */
+
+typedef struct
+{
+	int		card_id;	/* unique id assigned to this card */
+	int		card_type;	/* use DIA_CARD_TYPE_xxx above */
+	int		bus_type;	/* use DIA_BUS_TYPE_xxx above */
+	int		bus_num;	/* bus number (instance number of bus type) */
+	int		func_num;	/* adapter function number (PCI register) */
+	int		slot;		/* slot number in bus */
+	unsigned char	irq;		/* IRQ number */
+    int     reset_base; /* Reset register  for I/O mapped cards */
+	int		io_base;	/* I/O base for I/O mapped cards */
+	void	*memory[5];	/* memory base addresses for memory mapped cards */
+	char	name[9];	/* name of adapter */
+	int		serial;		/* serial number */
+	unsigned char	int_priority;	/* Interrupt priority */
+} dia_card_t;
+
+/*
+ * protocol configuration information
+ * passed as parameter to DIA_IOCTL_CONFIG ioctl to configure card
+ */
+
+typedef struct
+{
+	int				card_id;			/* to identify particular card */
+	unsigned char	tei;
+	unsigned char	nt2;
+	unsigned char	watchdog;
+	unsigned char	permanent;
+	unsigned char	x_interface;
+	unsigned char	stable_l2;
+	unsigned char	no_order_check;
+	unsigned char	handset_type;
+	unsigned char	sig_flags;
+	unsigned char	low_channel;
+	unsigned char	prot_version;
+	unsigned char	crc4;
+	struct
+	{
+		unsigned char oad[32];
+		unsigned char osa[32];
+		unsigned char spid[32];
+	}terminal[2];
+} dia_config_t;
+
+/*
+ * code configuration 
+ * passed as parameter to DIA_IOCTL_LOAD ioctl
+ * one of these ioctl per code file to load
+ */
+
+typedef struct
+{
+	int				card_id;	/* card to load */
+	enum
+	{
+		DIA_CPU_CODE,			/* CPU code */
+		DIA_DSP_CODE,			/* DSP code */
+		DIA_CONT_CODE,			/* continuation of code */
+		DIA_TABLE_CODE,			/* code table */
+	        DIA_DLOAD_CNT,           /* number of downloads*/
+		DIA_FPGA_CODE
+	}				code_type;	/* code for CPU or DSP ? */
+	int				length;		/* length of code */
+	unsigned char	*code;		/* pointer (in user-space) to code */
+} dia_load_t;
+
+/*
+ * start configuration 
+ * passed as parameter to DIA_IOCTL_START ioctl
+ */
+
+typedef struct
+{
+	int				card_id;	/* card to start */
+} dia_start_t;
+
+/* used for retrieving memory from the card */
+
+typedef struct {
+	word	card_id;
+	dword 	addr;
+	byte	data[16 * 8];
+} mem_block_t;
+
+/* DIVA Server specific addresses */
+
+#define DIVAS_CPU_START_ADDR    (0x0)
+#define	ORG_MAX_PROTOCOL_CODE_SIZE	0x000A0000
+#define	ORG_MAX_DSP_CODE_SIZE		(0x000F0000 - ORG_MAX_PROTOCOL_CODE_SIZE)
+#define	ORG_DSP_CODE_BASE		(0xBF7F0000 - ORG_MAX_DSP_CODE_SIZE)
+#define DIVAS_DSP_START_ADDR    (0xBF7A0000)
+#define DIVAS_SHARED_OFFSET     (0x1000)
+#define MP_DSP_CODE_BASE           0xa03a0000
+#define MQ_PROTCODE_OFFSET  0x100000
+#define MQ_SM_OFFSET		0X0f0000
+
+#define	V90D_MAX_PROTOCOL_CODE_SIZE	0x00090000
+#define V90D_MAX_DSP_CODE_SIZE		(0x000F0000 - V90D_MAX_PROTOCOL_CODE_SIZE)
+#define	V90D_DSP_CODE_BASE		(0xBF7F0000 - V90D_MAX_DSP_CODE_SIZE)
+
+#define MQ_ORG_MAX_PROTOCOL_CODE_SIZE   0x000a0000  /* max 640K Protocol-Code */
+#define MQ_ORG_MAX_DSP_CODE_SIZE        0x00050000  /* max 320K DSP-Code */
+#define MQ_ORG_DSP_CODE_BASE           (MQ_MAX_DSP_DOWNLOAD_ADDR \
+                                      - MQ_ORG_MAX_DSP_CODE_SIZE)
+#define MQ_V90D_MAX_PROTOCOL_CODE_SIZE  0x00090000  /* max 576K Protocol-Code */
+#define MQ_V90D_MAX_DSP_CODE_SIZE       0x00060000  /* max 384K DSP-Code if V.90D included */
+#define	MQ_MAX_DSP_DOWNLOAD_ADDR        0xa03f0000
+#define MQ_V90D_DSP_CODE_BASE          (MQ_MAX_DSP_DOWNLOAD_ADDR \
+                                      - MQ_V90D_MAX_DSP_CODE_SIZE)
+
+
+#define ALIGNMENT_MASK_MAESTRA        0xfffffffc
+
+#endif /* DIVAS_H */