patch-2.2.18 linux/drivers/usb/devices.c

Next file: linux/drivers/usb/devio.c
Previous file: linux/drivers/usb/dc2xx.c
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/usb/devices.c linux/drivers/usb/devices.c
@@ -0,0 +1,560 @@
+/*
+ * devices.c
+ * (C) Copyright 1999 Randy Dunlap.
+ * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. (proc file per device)
+ * (C) Copyright 1999 Deti Fliegl (new USB architecture)
+ *
+ * $id$
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *************************************************************
+ *
+ * <mountpoint>/devices contains USB topology, device, config, class,
+ * interface, & endpoint data.
+ *
+ * I considered using /proc/bus/usb/devices/device# for each device
+ * as it is attached or detached, but I didn't like this for some
+ * reason -- maybe it's just too deep of a directory structure.
+ * I also don't like looking in multiple places to gather and view
+ * the data.  Having only one file for ./devices also prevents race
+ * conditions that could arise if a program was reading device info
+ * for devices that are being removed (unplugged).  (That is, the
+ * program may find a directory for devnum_12 then try to open it,
+ * but it was just unplugged, so the directory is now deleted.
+ * But programs would just have to be prepared for situations like
+ * this in any plug-and-play environment.)
+ *
+ * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Converted the whole proc stuff to real
+ *   read methods. Now not the whole device list needs to fit
+ *   into one page, only the device list for one bus.
+ *   Added a poll method to /proc/bus/usb/devices, to wake
+ *   up an eventual usbd
+ * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Turned into its own filesystem
+ * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
+ *   Converted file reading routine to dump to buffer once
+ *   per device, not per bus
+ *
+ * $Id: devices.c,v 1.5 2000/01/11 13:58:21 tom Exp $
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+#include <linux/usbdevice_fs.h>
+#include <asm/uaccess.h>
+
+#define MAX_TOPO_LEVEL		6
+
+/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
+#define ALLOW_SERIAL_NUMBER
+
+static char *format_topo =
+/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */
+  "T:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n";
+
+static char *format_string_manufacturer =
+/* S:  Manufacturer=xxxx */
+  "S:  Manufacturer=%.100s\n";
+
+static char *format_string_product =
+/* S:  Product=xxxx */
+  "S:  Product=%.100s\n";
+
+#ifdef ALLOW_SERIAL_NUMBER
+static char *format_string_serialnumber =
+/* S:  SerialNumber=xxxx */
+  "S:  SerialNumber=%.100s\n";
+#endif
+
+static char *format_bandwidth =
+/* B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */
+  "B:  Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";
+  
+static char *format_device1 =
+/* D:  Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */
+  "D:  Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";
+
+static char *format_device2 =
+/* P:  Vendor=xxxx ProdID=xxxx Rev=xx.xx */
+  "P:  Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";
+
+static char *format_config =
+/* C:  #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */
+  "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";
+  
+static char *format_iface =
+/* I:  If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
+  "I:  If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
+
+static char *format_endpt =
+/* E:  Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=dddms */
+  "E:  Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%3dms\n";
+
+
+/*
+ * Need access to the driver and USB bus lists.
+ * extern struct list_head usb_driver_list;
+ * extern struct list_head usb_bus_list;
+ * However, these will come from functions that return ptrs to each of them.
+ */
+
+static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq);
+static unsigned int conndiscevcnt = 0;
+
+/* this struct stores the poll state for <mountpoint>/devices pollers */
+struct usb_device_status {
+	unsigned int lastev;
+};
+
+struct class_info {
+	int class;
+	char *class_name;
+};
+
+static const struct class_info clas_info[] =
+{					/* max. 5 chars. per name string */
+	{USB_CLASS_PER_INTERFACE,	">ifc"},
+	{USB_CLASS_AUDIO,		"audio"},
+	{USB_CLASS_COMM,		"comm."},
+	{USB_CLASS_HID,			"HID"},
+	{USB_CLASS_HUB,			"hub"},
+	{USB_CLASS_PHYSICAL,		"PID"},
+	{USB_CLASS_PRINTER,		"print"},
+	{USB_CLASS_MASS_STORAGE,	"stor."},
+	{USB_CLASS_DATA,		"data"},
+	{USB_CLASS_APP_SPEC,		"app."},
+	{USB_CLASS_VENDOR_SPEC,		"vend."},
+	{-1,				"unk."}		/* leave as last */
+};
+
+/*****************************************************************/
+
+void usbdevfs_conn_disc_event(void)
+{
+	wake_up(&deviceconndiscwq);
+	conndiscevcnt++;
+}
+
+static const char *class_decode(const int class)
+{
+	int ix;
+
+	for (ix = 0; clas_info[ix].class != -1; ix++)
+		if (clas_info[ix].class == class)
+			break;
+	return (clas_info[ix].class_name);
+}
+
+static char *usb_dump_endpoint_descriptor(char *start, char *end, const struct usb_endpoint_descriptor *desc)
+{
+	char *EndpointType [4] = {"Ctrl", "Isoc", "Bulk", "Int."};
+
+	if (start > end)
+		return start;
+	start += sprintf(start, format_endpt, desc->bEndpointAddress,
+			 (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_CONTROL
+			 	? 'B' :			/* bidirectional */
+			 (desc->bEndpointAddress & USB_DIR_IN) ? 'I' : 'O',
+			 desc->bmAttributes, EndpointType[desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK],
+			 desc->wMaxPacketSize, desc->bInterval);
+	return start;
+}
+
+static char *usb_dump_endpoint(char *start, char *end, const struct usb_endpoint_descriptor *endpoint)
+{
+	return usb_dump_endpoint_descriptor(start, end, endpoint);
+}
+
+static char *usb_dump_interface_descriptor(char *start, char *end, const struct usb_interface *iface, int setno)
+{
+	struct usb_interface_descriptor *desc = &iface->altsetting[setno];
+
+	if (start > end)
+		return start;
+	start += sprintf(start, format_iface,
+			 desc->bInterfaceNumber,
+			 desc->bAlternateSetting,
+			 desc->bNumEndpoints,
+			 desc->bInterfaceClass,
+			 class_decode(desc->bInterfaceClass),
+			 desc->bInterfaceSubClass,
+			 desc->bInterfaceProtocol,
+			 iface->driver ? iface->driver->name : "(none)");
+	return start;
+}
+
+static char *usb_dump_interface(char *start, char *end, const struct usb_interface *iface, int setno)
+{
+	struct usb_interface_descriptor *desc = &iface->altsetting[setno];
+	int i;
+
+	start = usb_dump_interface_descriptor(start, end, iface, setno);
+	for (i = 0; i < desc->bNumEndpoints; i++) {
+		if (start > end)
+			return start;
+		start = usb_dump_endpoint(start, end, desc->endpoint + i);
+	}
+	return start;
+}
+
+/* TBD:
+ * 0. TBDs
+ * 1. marking active config and ifaces (code lists all, but should mark
+ *    which ones are active, if any)
+ * 2. add <halted> status to each endpoint line
+ */
+
+static char *usb_dump_config_descriptor(char *start, char *end, const struct usb_config_descriptor *desc, int active)
+{
+	if (start > end)
+		return start;
+	start += sprintf(start, format_config,
+			 active ? '*' : ' ',	/* mark active/actual/current cfg. */
+			 desc->bNumInterfaces,
+			 desc->bConfigurationValue,
+			 desc->bmAttributes,
+			 desc->MaxPower * 2);
+	return start;
+}
+
+static char *usb_dump_config(char *start, char *end, const struct usb_config_descriptor *config, int active)
+{
+	int i, j;
+	struct usb_interface *interface;
+
+	if (start > end)
+		return start;
+	if (!config)		/* getting these some in 2.3.7; none in 2.3.6 */
+		return start + sprintf(start, "(null Cfg. desc.)\n");
+	start = usb_dump_config_descriptor(start, end, config, active);
+	for (i = 0; i < config->bNumInterfaces; i++) {
+		interface = config->interface + i;
+		if (!interface)
+			break;
+		for (j = 0; j < interface->num_altsetting; j++) {
+			if (start > end)
+				return start;
+			start = usb_dump_interface(start, end, interface, j);
+		}
+	}
+	return start;
+}
+
+/*
+ * Dump the different USB descriptors.
+ */
+static char *usb_dump_device_descriptor(char *start, char *end, const struct usb_device_descriptor *desc)
+{
+	if (start > end)
+		return start;
+	start += sprintf (start, format_device1,
+			  desc->bcdUSB >> 8, desc->bcdUSB & 0xff,
+			  desc->bDeviceClass,
+			  class_decode (desc->bDeviceClass),
+			  desc->bDeviceSubClass,
+			  desc->bDeviceProtocol,
+			  desc->bMaxPacketSize0,
+			  desc->bNumConfigurations);
+	if (start > end)
+		return start;
+	start += sprintf(start, format_device2,
+			 desc->idVendor, desc->idProduct,
+			 desc->bcdDevice >> 8, desc->bcdDevice & 0xff);
+	return start;
+}
+
+/*
+ * Dump the different strings that this device holds.
+ */
+static char *usb_dump_device_strings (char *start, char *end, struct usb_device *dev)
+{
+	char *buf;
+
+	if (start > end)
+		return start;
+	buf = kmalloc(128, GFP_KERNEL);
+	if (!buf)
+		return start;
+	if (dev->descriptor.iManufacturer) {
+		if (usb_string(dev, dev->descriptor.iManufacturer, buf, 128) > 0)
+			start += sprintf(start, format_string_manufacturer, buf);
+	}				
+	if (start > end)
+		goto out;
+	if (dev->descriptor.iProduct) {
+		if (usb_string(dev, dev->descriptor.iProduct, buf, 128) > 0)
+			start += sprintf(start, format_string_product, buf);
+	}
+	if (start > end)
+		goto out;
+#ifdef ALLOW_SERIAL_NUMBER
+	if (dev->descriptor.iSerialNumber) {
+		if (usb_string(dev, dev->descriptor.iSerialNumber, buf, 128) > 0)
+			start += sprintf(start, format_string_serialnumber, buf);
+	}
+#endif
+ out:
+	kfree(buf);
+	return start;
+}
+
+static char *usb_dump_desc(char *start, char *end, struct usb_device *dev)
+{
+	int i;
+
+	if (start > end)
+		return start;
+		
+	start = usb_dump_device_descriptor(start, end, &dev->descriptor);
+
+	if (start > end)
+		return start;
+	
+	start = usb_dump_device_strings (start, end, dev);
+	
+	for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+		if (start > end)
+			return start;
+		start = usb_dump_config(start, end, dev->config + i,
+					(dev->config + i) == dev->actconfig); /* active ? */
+	}
+	return start;
+}
+
+
+#ifdef PROC_EXTRA /* TBD: may want to add this code later */
+
+static char *usb_dump_hub_descriptor(char *start, char *end, const struct usb_hub_descriptor * desc)
+{
+	int leng = USB_DT_HUB_NONVAR_SIZE;
+	unsigned char *ptr = (unsigned char *)desc;
+
+	if (start > end)
+		return start;
+	start += sprintf(start, "Interface:");
+	while (leng && start <= end) {
+		start += sprintf(start, " %02x", *ptr);
+		ptr++; leng--;
+	}
+	*start++ = '\n';
+	return start;
+}
+
+static char *usb_dump_string(char *start, char *end, const struct usb_device *dev, char *id, int index)
+{
+	if (start > end)
+		return start;
+	start += sprintf(start, "Interface:");
+	if (index <= dev->maxstring && dev->stringindex && dev->stringindex[index])
+		start += sprintf(start, "%s: %.100s ", id, dev->stringindex[index]);
+	return start;
+}
+
+#endif /* PROC_EXTRA */
+
+/*****************************************************************/
+
+/* This is a recursive function. Parameters:
+ * buffer - the user-space buffer to write data into
+ * nbytes - the maximum number of bytes to write
+ * skip_bytes - the number of bytes to skip before writing anything
+ * file_offset - the offset into the devices file on completion
+ */
+static ssize_t usb_device_dump(char **buffer, size_t *nbytes, loff_t *skip_bytes, loff_t *file_offset,
+				struct usb_device *usbdev, struct usb_bus *bus, int level, int index, int count)
+{
+	int chix;
+	int ret, cnt = 0;
+	int parent_devnum = 0;
+	char *pages_start, *data_end;
+	unsigned int length;
+	ssize_t total_written = 0;
+	
+	/* don't bother with anything else if we're not writing any data */
+	if (*nbytes <= 0)
+		return 0;
+	
+	if (level > MAX_TOPO_LEVEL)
+		return total_written;
+	/* allocate 2^1 pages = 8K (on i386); should be more than enough for one device */
+        if (!(pages_start = (char*) __get_free_pages(GFP_KERNEL,1)))
+                return -ENOMEM;
+		
+	if (usbdev->parent && usbdev->parent->devnum != -1)
+		parent_devnum = usbdev->parent->devnum;
+	/*
+	 * So the root hub's parent is 0 and any device that is
+	 * plugged into the root hub has a parent of 0.
+	 */
+	data_end = pages_start + sprintf(pages_start, format_topo, bus->busnum, level, parent_devnum, index, count,
+					usbdev->devnum, usbdev->slow ? "1.5" : "12 ", usbdev->maxchild);
+	/*
+	 * level = topology-tier level;
+	 * parent_devnum = parent device number;
+	 * index = parent's connector number;
+	 * count = device count at this level
+	 */
+	/* If this is the root hub, display the bandwidth information */
+	if (level == 0)
+		data_end += sprintf(data_end, format_bandwidth, bus->bandwidth_allocated,
+				FRAME_TIME_MAX_USECS_ALLOC,
+				(100 * bus->bandwidth_allocated + FRAME_TIME_MAX_USECS_ALLOC / 2) / FRAME_TIME_MAX_USECS_ALLOC,
+			         bus->bandwidth_int_reqs, bus->bandwidth_isoc_reqs);
+	
+	data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256, usbdev);
+	
+	if (data_end > (pages_start + (2 * PAGE_SIZE) - 256))
+		data_end += sprintf(data_end, "(truncated)\n");
+	
+	length = data_end - pages_start;
+	/* if we can start copying some data to the user */
+	if (length > *skip_bytes) {
+		length -= *skip_bytes;
+		if (length > *nbytes)
+			length = *nbytes;
+		if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) {
+			free_pages((unsigned long)pages_start, 1);
+			
+			if (total_written == 0)
+				return -EFAULT;
+			return total_written;
+		}
+		*nbytes -= length;
+		*file_offset += length;
+		total_written += length;
+		*buffer += length;
+		*skip_bytes = 0;
+	} else
+		*skip_bytes -= length;
+	
+	free_pages((unsigned long)pages_start, 1);
+	
+	/* Now look at all of this device's children. */
+	for (chix = 0; chix < usbdev->maxchild; chix++) {
+		if (usbdev->children[chix]) {
+			ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, usbdev->children[chix],
+					bus, level + 1, chix, ++cnt);
+			if (ret == -EFAULT)
+				return total_written;
+			total_written += ret;
+		}
+	}
+	return total_written;
+}
+
+static ssize_t usb_device_read(struct file *file, char *buf, size_t nbytes, loff_t *ppos)
+{
+	struct list_head *buslist;
+	struct usb_bus *bus;
+	ssize_t ret, total_written = 0;
+	loff_t skip_bytes = *ppos;
+
+	if (*ppos < 0)
+		return -EINVAL;
+	if (nbytes <= 0)
+		return 0;
+	if (!access_ok(VERIFY_WRITE, buf, nbytes))
+		return -EFAULT;
+
+	/* enumerate busses */
+	for (buslist = usb_bus_list.next; buslist != &usb_bus_list; buslist = buslist->next) {
+		/* print devices for this bus */
+		bus = list_entry(buslist, struct usb_bus, bus_list);
+		/* recurse through all children of the root hub */
+		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
+		if (ret < 0)
+			return ret;
+		total_written += ret;
+	}
+	return total_written;
+}
+
+/* Kernel lock for "lastev" protection */
+static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct usb_device_status *st = (struct usb_device_status *)file->private_data;
+	unsigned int mask = 0;
+
+	lock_kernel();
+	if (!st) {
+		st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
+		if (!st)
+			return POLLIN;
+		/*
+		 * need to prevent the module from being unloaded, since
+		 * proc_unregister does not call the release method and
+		 * we would have a memory leak
+		 */
+		st->lastev = conndiscevcnt;
+		file->private_data = st;
+		mask = POLLIN;
+	}
+	if (file->f_mode & FMODE_READ)
+                poll_wait(file, &deviceconndiscwq, wait);
+	if (st->lastev != conndiscevcnt)
+		mask |= POLLIN;
+	st->lastev = conndiscevcnt;
+	unlock_kernel();
+	return mask;
+}
+
+static int usb_device_open(struct inode *inode, struct file *file)
+{
+        file->private_data = NULL;
+        return 0;
+}
+
+static int usb_device_release(struct inode *inode, struct file *file)
+{
+	if (file->private_data) {
+		kfree(file->private_data);
+		file->private_data = NULL;
+	}
+
+        return 0;
+}
+
+static loff_t usb_device_lseek(struct file * file, loff_t offset, int orig)
+{
+	switch (orig) {
+	case 0:
+		file->f_pos = offset;
+		return file->f_pos;
+
+	case 1:
+		file->f_pos += offset;
+		return file->f_pos;
+
+	case 2:
+		return -EINVAL;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+struct file_operations usbdevfs_devices_fops = {
+	llseek:		usb_device_lseek,
+	read:		usb_device_read,
+	poll:		usb_device_poll,
+	open:		usb_device_open,
+	release:	usb_device_release,
+};

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)