patch-2.2.16 linux/drivers/block/ide-cd.h
Next file: linux/drivers/block/ide-disk.c
Previous file: linux/drivers/block/ide-cd.c
Back to the patch index
Back to the overall index
- Lines: 688
- Date:
Wed Jun 7 14:26:42 2000
- Orig file:
v2.2.15/linux/drivers/block/ide-cd.h
- Orig date:
Tue Oct 26 17:53:39 1999
diff -urN v2.2.15/linux/drivers/block/ide-cd.h linux/drivers/block/ide-cd.h
@@ -1,12 +1,13 @@
#ifndef _IDE_CD_H
#define _IDE_CD_H
/*
- * linux/drivers/block/ide_modes.h
+ * linux/drivers/block/ide_cd.h
*
- * Copyright (C) 1996 Erik Andersen
- * Copyright (C) 1998, 1999 Jens Axboe
+ * Copyright (C) 1996, 1997, 1998 Erik Andersen
+ * Copyright (C) 1998, 1999, 2000 Jens Axboe
*/
+#include <linux/cdrom.h>
#include <asm/byteorder.h>
/* Turn this on to have the driver print out the meanings of the
@@ -34,19 +35,13 @@
#define NO_DOOR_LOCKING 0
#endif
-
-/* Size of buffer to allocate, in blocks, for audio reads. */
-
-#ifndef CDROM_NBLOCKS_BUFFER
-#define CDROM_NBLOCKS_BUFFER 8
-#endif
-
-
/************************************************************************/
-#define SECTOR_SIZE 512
-#define SECTOR_BITS 9
-#define SECTORS_PER_FRAME (CD_FRAMESIZE / SECTOR_SIZE)
+#define SECTOR_SIZE 512
+#define SECTOR_BITS 9
+#define SECTORS_PER_FRAME (CD_FRAMESIZE / SECTOR_SIZE)
+#define SECTOR_BUFFER_SIZE (CD_FRAMESIZE * 32)
+#define SECTORS_BUFFER (SECTOR_BUFFER_SIZE / SECTOR_SIZE)
#define MIN(a,b) ((a) < (b) ? (a) : (b))
@@ -55,96 +50,37 @@
#define REQUEST_SENSE_COMMAND 4316
#define RESET_DRIVE_COMMAND 4317
-/*
- * For controlling drive spindown time.
- */
-#define CDROMGETSPINDOWN 0x531d
-#define CDROMSETSPINDOWN 0x531e
-
-
-/* Some ATAPI command opcodes (just like SCSI).
- (Some other cdrom-specific codes are in cdrom.h.) */
-#define TEST_UNIT_READY 0x00
-#define REQUEST_SENSE 0x03
-#define INQUIRY 0x12
-#define START_STOP 0x1b
-#define ALLOW_MEDIUM_REMOVAL 0x1e
-#define READ_CAPACITY 0x25
-#define READ_10 0x28
-#define SEEK 0x2b
-#define READ_HEADER 0x44
-#define STOP_PLAY_SCAN 0x4e
-#define MODE_SELECT_10 0x55
-#define MODE_SENSE_10 0x5a
-#define LOAD_UNLOAD 0xa6
-#define READ_12 0xa8
-#define READ_CD_MSF 0xb9
-#define SCAN 0xba
-#define SET_CD_SPEED 0xbb
-#define PLAY_CD 0xbc
-#define MECHANISM_STATUS 0xbd
-#define READ_CD 0xbe
-
-/* DVD Opcodes */
-#define DVD_GET_PERFORMANCE 0xac
-
-
-/* Page codes for mode sense/set */
-
-#define PAGE_READERR 0x01
-#define PAGE_CDROM 0x0d
-#define PAGE_AUDIO 0x0e
-#define PAGE_CAPABILITIES 0x2a
-#define PAGE_ALL 0x3f
-
-
-/* ATAPI sense keys (from table 140 of ATAPI 2.6) */
-
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define ABORTED_COMMAND 0x0b
-#define MISCOMPARE 0x0e
-
-/* We want some additional flags for CDROM drives.
- To save space in the ide_drive_t struct, use some fields which
- doesn't make sense for CDROMs -- `bios_cyl' and `bios_head'. */
/* Configuration flags. These describe the capabilities of the drive.
They generally do not change after initialization, unless we learn
more about the drive from stuff failing. */
struct ide_cd_config_flags {
- __u8 drq_interrupt : 1; /* Device sends an interrupt when ready
- for a packet command. */
- __u8 no_doorlock : 1; /* Drive cannot lock the door. */
- __u8 no_eject : 1; /* Drive cannot eject the disc. */
- __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */
- __u8 playmsf_as_bcd : 1; /* PLAYMSF command takes BCD args. */
- __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */
- __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
- __u8 subchan_as_bcd : 1; /* Subchannel info is in BCD. */
- __u8 is_changer : 1; /* Drive is a changer. */
- __u8 cd_r : 1; /* Drive can write to CD-R media . */
- __u8 cd_rw : 1; /* Drive can write to CD-R/W media . */
- __u8 dvd : 1; /* Drive is a DVD-ROM */
- __u8 dvd_r : 1; /* Drive can write DVD-RAM */
- __u8 dvd_rw : 1; /* Drive can write DVD-R/W */
- __u8 test_write : 1; /* Drive can fake writes */
- __u8 supp_disc_present: 1; /* Changer can report exact contents
- of slots. */
- __u8 limit_nframes : 1; /* Drive does not provide data in
- multiples of SECTOR_SIZE when more
- than one interrupt is needed. */
- __u8 seeking : 1; /* Seeking in progress */
- __u8 audio_play : 1; /* can do audio related commands */
- __u8 close_tray : 1; /* can close the tray */
- __u8 reserved : 4;
- byte max_speed; /* Max speed of the drive */
+ __u8 drq_interrupt : 1; /* Device sends an interrupt when ready
+ for a packet command. */
+ __u8 no_doorlock : 1; /* Drive cannot lock the door. */
+ __u8 no_eject : 1; /* Drive cannot eject the disc. */
+ __u8 nec260 : 1; /* Drive is a pre-1.2 NEC 260 drive. */
+ __u8 playmsf_as_bcd : 1; /* PLAYMSF command takes BCD args. */
+ __u8 tocaddr_as_bcd : 1; /* TOC addresses are in BCD. */
+ __u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
+ __u8 subchan_as_bcd : 1; /* Subchannel info is in BCD. */
+ __u8 is_changer : 1; /* Drive is a changer. */
+ __u8 cd_r : 1; /* Drive can write to CD-R media . */
+ __u8 cd_rw : 1; /* Drive can write to CD-R/W media . */
+ __u8 dvd : 1; /* Drive is a DVD-ROM */
+ __u8 dvd_r : 1; /* Drive can write DVD-R */
+ __u8 dvd_ram : 1; /* Drive can write DVD-RAM */
+ __u8 test_write : 1; /* Drive can fake writes */
+ __u8 supp_disc_present : 1; /* Changer can report exact contents
+ of slots. */
+ __u8 limit_nframes : 1; /* Drive does not provide data in
+ multiples of SECTOR_SIZE when more
+ than one interrupt is needed. */
+ __u8 seeking : 1; /* Seeking in progress */
+ __u8 audio_play : 1; /* can do audio related commands */
+ __u8 close_tray : 1; /* can close the tray */
+ __u8 reserved : 4;
+ byte max_speed; /* Max speed of the drive */
};
#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))
@@ -155,51 +91,17 @@
__u8 media_changed : 1; /* Driver has noticed a media change. */
__u8 toc_valid : 1; /* Saved TOC information is current. */
__u8 door_locked : 1; /* We think that the drive door is locked. */
- __u8 sanyo_slot : 2; /* Sanyo 3 CD changer support */
- __u8 reserved : 3;
+ __u8 reserved : 5;
byte current_speed; /* Current speed of the drive */
};
-#define CDROM_STATE_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->state_flags))
-
-struct atapi_request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
- unsigned char valid : 1;
- unsigned char error_code : 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned char error_code : 7;
- unsigned char valid : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- byte reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
- unsigned char reserved3 : 2;
- unsigned char ili : 1;
- unsigned char reserved2 : 1;
- unsigned char sense_key : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned char sense_key : 4;
- unsigned char reserved2 : 1;
- unsigned char ili : 1;
- unsigned char reserved3 : 2;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- byte info[4];
- byte sense_len;
- byte command_info[4];
- byte asc;
- byte ascq;
- byte fru;
- byte sense_key_specific[3];
-};
+#define CDROM_STATE_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->state_flags))
struct packet_command {
char *buffer;
int buflen;
int stat;
- struct atapi_request_sense *sense_data;
+ struct request_sense *sense;
unsigned char c[12];
};
@@ -278,16 +180,12 @@
};
-typedef enum {
- mechtype_caddy = 0,
- mechtype_tray = 1,
- mechtype_popup = 2,
- mechtype_individual_changer = 4,
- mechtype_cartridge_changer = 5
-} mechtype_t;
-
+/* This should probably go into cdrom.h along with the other
+ * generic stuff now in the Mt. Fuji spec.
+ */
struct atapi_capabilities_page {
+ struct mode_page_header header;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 parameters_saveable : 1;
__u8 reserved1 : 1;
@@ -500,8 +398,7 @@
/* Current speed (in kB/s). */
unsigned short curspeed;
- /* Truncate the structure here, so we don't have headaches reading
- from older drives. */
+ char pad[4];
};
@@ -552,13 +449,11 @@
byte reserved2[3];
};
-
struct atapi_changer_info {
struct atapi_mechstat_header hdr;
struct atapi_slot slots[0];
};
-
/* Extra per-device info for cdrom drives. */
struct cdrom_info {
@@ -567,21 +462,13 @@
struct atapi_toc *toc;
- /* Sector buffer. If a read request wants only the first part
- of a cdrom block, we cache the rest of the block here,
- in the expectation that the data is going to be wanted soon.
- SECTOR_BUFFERED is the number of the first buffered sector,
- and NSECTORS_BUFFERED is the number of sectors in the buffer.
- Before the buffer is allocated, we should have
- SECTOR_BUFFER == NULL and NSECTORS_BUFFERED == 0. */
-
- unsigned long sector_buffered;
- unsigned long nsectors_buffered;
- char *sector_buffer;
+ unsigned long sector_buffered;
+ unsigned long nsectors_buffered;
+ unsigned char *buffer;
/* The result of the last successful request sense command
on this device. */
- struct atapi_request_sense sense_data;
+ struct request_sense sense_data;
struct request request_sense_request;
struct packet_command request_sense_pc;
@@ -598,21 +485,91 @@
struct cdrom_device_info devinfo;
};
-
-#define SECTOR_BUFFER_SIZE CD_FRAMESIZE
-
-
/****************************************************************************
* Descriptions of ATAPI error codes.
*/
#define ARY_LEN(a) ((sizeof(a) / sizeof(a[0])))
+/* This stuff should be in cdrom.h, since it is now generic... */
+
+/* ATAPI sense keys (from table 140 of ATAPI 2.6) */
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define ABORTED_COMMAND 0x0b
+#define MISCOMPARE 0x0e
+
+
+
+/* This stuff should be in cdrom.h, since it is now generic... */
#if VERBOSE_IDE_CD_ERRORS
-/* From Table 124 of the ATAPI 1.2 spec.
- Unchanged in Table 140 of the ATAPI 2.6 draft standard. */
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+const struct {
+ unsigned short packet_command;
+ const char * const text;
+} packet_command_texts[] = {
+ { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
+ { GPCMD_REQUEST_SENSE, "Request Sense" },
+ { GPCMD_FORMAT_UNIT, "Format Unit" },
+ { GPCMD_INQUIRY, "Inquiry" },
+ { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
+ { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
+ { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
+ { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
+ { GPCMD_READ_10, "Read 10" },
+ { GPCMD_WRITE_10, "Write 10" },
+ { GPCMD_SEEK, "Seek" },
+ { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
+ { GPCMD_VERIFY_10, "Verify 10" },
+ { GPCMD_FLUSH_CACHE, "Flush Cache" },
+ { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
+ { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
+ { GPCMD_READ_HEADER, "Read Header" },
+ { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
+ { GPCMD_GET_CONFIGURATION, "Get Configuration" },
+ { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
+ { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
+ { GPCMD_GET_EVENT_STATUS_NOTIFICATION, "Get Event Status Notification" },
+ { GPCMD_PAUSE_RESUME, "Pause/Resume" },
+ { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
+ { GPCMD_READ_DISC_INFO, "Read Disc Info" },
+ { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
+ { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
+ { GPCMD_SEND_OPC, "Send OPC" },
+ { GPCMD_MODE_SELECT_10, "Mode Select 10" },
+ { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
+ { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
+ { GPCMD_CLOSE_TRACK, "Close Track" },
+ { GPCMD_BLANK, "Blank" },
+ { GPCMD_SEND_EVENT, "Send Event" },
+ { GPCMD_SEND_KEY, "Send Key" },
+ { GPCMD_REPORT_KEY, "Report Key" },
+ { GPCMD_LOAD_UNLOAD, "Load/Unload" },
+ { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
+ { GPCMD_READ_12, "Read 12" },
+ { GPCMD_GET_PERFORMANCE, "Get Performance" },
+ { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
+ { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
+ { GPCMD_SET_STREAMING, "Set Streaming" },
+ { GPCMD_READ_CD_MSF, "Read CD MSF" },
+ { GPCMD_SCAN, "Scan" },
+ { GPCMD_SET_SPEED, "Set Speed" },
+ { GPCMD_PLAY_CD, "Play CD" },
+ { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
+ { GPCMD_READ_CD, "Read CD" },
+};
+
+
+/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
const char * const sense_key_texts[16] = {
"No sense data",
"Recovered error",
@@ -632,162 +589,145 @@
"(reserved)",
};
-
-/* From Table 37 of the ATAPI 2.6 draft standard. */
-const struct {
- unsigned short packet_command;
- const char * const text;
-} packet_command_texts[] = {
- { TEST_UNIT_READY, "Test Unit Ready" },
- { REQUEST_SENSE, "Request Sense" },
- { INQUIRY, "Inquiry" },
- { START_STOP, "Start Stop Unit" },
- { ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
- { READ_CAPACITY, "Read CD-ROM Capacity" },
- { READ_10, "Read(10)" },
- { SEEK, "Seek" },
- { SCMD_READ_TOC, "Read TOC" },
- { SCMD_READ_SUBCHANNEL, "Read Sub-Channel" },
- { READ_HEADER, "Read Header" },
- { STOP_PLAY_SCAN, "Stop Play/Scan" },
- { SCMD_PLAYAUDIO10, "Play Audio" },
- { SCMD_PLAYAUDIO_MSF, "Play Audio MSF" },
- { SCMD_PAUSE_RESUME, "Pause/Resume" },
- { MODE_SELECT_10, "Mode Select" },
- { MODE_SENSE_10, "Mode Sense" },
- { LOAD_UNLOAD, "Load/Unload CD" },
- { READ_12, "Read(12)" },
- { READ_CD_MSF, "Read CD MSF" },
- { SCAN, "Scan" },
- { SET_CD_SPEED, "Set CD Speed" },
- { PLAY_CD, "Play CD" },
- { MECHANISM_STATUS, "Mechanism Status" },
- { READ_CD, "Read CD" },
- { DVD_GET_PERFORMANCE, "Get Performance" },
-};
-
-
-/* From Table 125 of the ATAPI 1.2 spec.,
- with additions from Tables 141 and 142 of the ATAPI 2.6 draft standard. */
-
+/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
const struct {
- unsigned short asc_ascq;
+ unsigned long asc_ascq;
const char * const text;
} sense_data_texts[] = {
- { 0x0000, "No additional sense information" },
-
- { 0x0011, "Audio play operation in progress" },
- { 0x0012, "Audio play operation paused" },
- { 0x0013, "Audio play operation successfully completed" },
- { 0x0014, "Audio play operation stopped due to error" },
- { 0x0015, "No current audio status to return" },
-
- { 0x0100, "Mechanical positioning or changer error" },
-
- { 0x0200, "No seek complete" },
-
- { 0x0400, "Logical unit not ready - cause not reportable" },
- { 0x0401,
- "Logical unit not ready - in progress (sic) of becoming ready" },
- { 0x0402, "Logical unit not ready - initializing command required" },
- { 0x0403, "Logical unit not ready - manual intervention required" },
-
- { 0x0501, "Media load - eject failed" },
-
- { 0x0600, "No reference position found" },
-
- { 0x0900, "Track following error" },
- { 0x0901, "Tracking servo failure" },
- { 0x0902, "Focus servo failure" },
- { 0x0903, "Spindle servo failure" },
-
- { 0x1100, "Unrecovered read error" },
- { 0x1106, "CIRC unrecovered error" },
-
- { 0x1500, "Random positioning error" },
- { 0x1501, "Mechanical positioning or changer error" },
- { 0x1502, "Positioning error detected by read of medium" },
-
- { 0x1700, "Recovered data with no error correction applied" },
- { 0x1701, "Recovered data with retries" },
- { 0x1702, "Recovered data with positive head offset" },
- { 0x1703, "Recovered data with negative head offset" },
- { 0x1704, "Recovered data with retries and/or CIRC applied" },
- { 0x1705, "Recovered data using previous sector ID" },
-
- { 0x1800, "Recovered data with error correction applied" },
- { 0x1801, "Recovered data with error correction and retries applied" },
- { 0x1802, "Recovered data - the data was auto-reallocated" },
- { 0x1803, "Recovered data with CIRC" },
- { 0x1804, "Recovered data with L-EC" },
- /* Following two not in 2.6. */
- { 0x1805, "Recovered data - recommend reassignment" },
- { 0x1806, "Recovered data - recommend rewrite" },
-
- { 0x1a00, "Parameter list length error" },
-
- { 0x2000, "Invalid command operation code" },
-
- { 0x2100, "Logical block address out of range" },
-
- { 0x2400, "Invalid field in command packet" },
-
- { 0x2600, "Invalid field in parameter list" },
- { 0x2601, "Parameter not supported" },
- { 0x2602, "Parameter value invalid" },
- /* Following code not in 2.6. */
- { 0x2603, "Threshold parameters not supported" },
-
- { 0x2800, "Not ready to ready transition, medium may have changed" },
-
- { 0x2900, "Power on, reset or bus device reset occurred" },
-
- { 0x2a00, "Parameters changed" },
- { 0x2a01, "Mode parameters changed" },
-
- { 0x3000, "Incompatible medium installed" },
- { 0x3001, "Cannot read medium - unknown format" },
- { 0x3002, "Cannot read medium - incompatible format" },
-
- /* Following code not in 2.6. */
- { 0x3700, "Rounded parameter" },
-
- { 0x3900, "Saving parameters not supported" },
-
- { 0x3a00, "Medium not present" },
-
- { 0x3f00, "ATAPI CD-ROM drive operating conditions have changed" },
- { 0x3f01, "Microcode has been changed" },
- /* Following two not in 2.6. */
- { 0x3f02, "Changed operating definition" },
- { 0x3f03, "Inquiry data has changed" },
-
- { 0x4000, "Diagnostic failure on component (ASCQ)" },
-
- { 0x4400, "Internal ATAPI CD-ROM drive failure" },
-
- { 0x4e00, "Overlapped commands attempted" },
-
- { 0x5300, "Media load or eject failed" },
- { 0x5302, "Medium removal prevented" },
-
- { 0x5700, "Unable to recover table of contents" },
-
- { 0x5a00, "Operator request or state change input (unspecified)" },
- { 0x5a01, "Operator medium removal request" },
-
- /* Following two not in 2.6. */
- { 0x5b00, "Threshold condition met" },
- { 0x5c00, "Status change" },
-
- { 0x6300, "End of user area encountered on this track" },
-
- { 0x6400, "Illegal mode for this track or incompatible medium" },
-
- /* Following error is misspelled in ATAPI 2.6 */
- { 0xb900, "Play operation oborted [sic]" },
-
- { 0xbf00, "Loss of streaming" },
+ { 0x000000, "No additional sense information" },
+ { 0x000011, "Play operation in progress" },
+ { 0x000012, "Play operation paused" },
+ { 0x000013, "Play operation successfully completed" },
+ { 0x000014, "Play operation stopped due to error" },
+ { 0x000015, "No current audio status to return" },
+ { 0x010c0a, "Write error - padding blocks added" },
+ { 0x011700, "Recovered data with no error correction applied" },
+ { 0x011701, "Recovered data with retries" },
+ { 0x011702, "Recovered data with positive head offset" },
+ { 0x011703, "Recovered data with negative head offset" },
+ { 0x011704, "Recovered data with retries and/or CIRC applied" },
+ { 0x011705, "Recovered data using previous sector ID" },
+ { 0x011800, "Recovered data with error correction applied" },
+ { 0x011801, "Recovered data with error correction and retries applied"},
+ { 0x011802, "Recovered data - the data was auto-reallocated" },
+ { 0x011803, "Recovered data with CIRC" },
+ { 0x011804, "Recovered data with L-EC" },
+ { 0x015d00,
+ "Failure prediction threshold exceeded - Predicted logical unit failure" },
+ { 0x015d01,
+ "Failure prediction threshold exceeded - Predicted media failure" },
+ { 0x015dff, "Failure prediction threshold exceeded - False" },
+ { 0x017301, "Power calibration area almost full" },
+ { 0x020400, "Logical unit not ready - cause not reportable" },
+ /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
+ { 0x020401,
+ "Logical unit not ready - in progress [sic] of becoming ready" },
+ { 0x020402, "Logical unit not ready - initializing command required" },
+ { 0x020403, "Logical unit not ready - manual intervention required" },
+ { 0x020404, "Logical unit not ready - format in progress" },
+ { 0x020407, "Logical unit not ready - operation in progress" },
+ { 0x020408, "Logical unit not ready - long write in progress" },
+ { 0x020600, "No reference position found (media may be upside down)" },
+ { 0x023000, "Incompatible medium installed" },
+ { 0x023a00, "Medium not present" },
+ { 0x025300, "Media load or eject failed" },
+ { 0x025700, "Unable to recover table of contents" },
+ { 0x030300, "Peripheral device write fault" },
+ { 0x030301, "No write current" },
+ { 0x030302, "Excessive write errors" },
+ { 0x030c00, "Write error" },
+ { 0x030c01, "Write error - Recovered with auto reallocation" },
+ { 0x030c02, "Write error - auto reallocation failed" },
+ { 0x030c03, "Write error - recommend reassignment" },
+ { 0x030c04, "Compression check miscompare error" },
+ { 0x030c05, "Data expansion occurred during compress" },
+ { 0x030c06, "Block not compressible" },
+ { 0x030c07, "Write error - recovery needed" },
+ { 0x030c08, "Write error - recovery failed" },
+ { 0x030c09, "Write error - loss of streaming" },
+ { 0x031100, "Unrecovered read error" },
+ { 0x031106, "CIRC unrecovered error" },
+ { 0x033101, "Format command failed" },
+ { 0x033200, "No defect spare location available" },
+ { 0x033201, "Defect list update failure" },
+ { 0x035100, "Erase failure" },
+ { 0x037200, "Session fixation error" },
+ { 0x037201, "Session fixation error writin lead-in" },
+ { 0x037202, "Session fixation error writin lead-out" },
+ { 0x037300, "CD control error" },
+ { 0x037302, "Power calibration area is full" },
+ { 0x037303, "Power calibration area error" },
+ { 0x037304, "Program memory area / RMA update failure" },
+ { 0x037305, "Program memory area / RMA is full" },
+ { 0x037306, "Program memory area / RMA is (almost) full" },
+
+ { 0x040200, "No seek complete" },
+ { 0x040300, "Write fault" },
+ { 0x040900, "Track following error" },
+ { 0x040901, "Tracking servo failure" },
+ { 0x040902, "Focus servo failure" },
+ { 0x040903, "Spindle servo failure" },
+ { 0x041500, "Random positioning error" },
+ { 0x041501, "Mechanical positioning or changer error" },
+ { 0x041502, "Positioning error detected by read of medium" },
+ { 0x043c00, "Mechanical positioning or changer error" },
+ { 0x044000, "Diagnostic failure on component (ASCQ)" },
+ { 0x044400, "Internal CD/DVD logical unit failure" },
+ { 0x04b600, "Media load mechanism failed" },
+ { 0x051a00, "Parameter list length error" },
+ { 0x052000, "Invalid command operation code" },
+ { 0x052100, "Logical block address out of range" },
+ { 0x052102, "Invalid address for write" },
+ { 0x052400, "Invalid field in command packet" },
+ { 0x052600, "Invalid field in parameter list" },
+ { 0x052601, "Parameter not supported" },
+ { 0x052602, "Parameter value invalid" },
+ { 0x052700, "Write protected media" },
+ { 0x052c00, "Command sequence error" },
+ { 0x052c03, "Current program area is not empty" },
+ { 0x052c04, "Current program area is empty" },
+ { 0x053001, "Cannot read medium - unknown format" },
+ { 0x053002, "Cannot read medium - incompatible format" },
+ { 0x053900, "Saving parameters not supported" },
+ { 0x054e00, "Overlapped commands attempted" },
+ { 0x055302, "Medium removal prevented" },
+ { 0x055500, "System resource failure" },
+ { 0x056300, "End of user area encountered on this track" },
+ { 0x056400, "Illegal mode for this track or incompatible medium" },
+ { 0x056f00, "Copy protection key exchange failure - Authentication failure" },
+ { 0x056f01, "Copy protection key exchange failure - Key not present" },
+ { 0x056f02, "Copy protection key exchange failure - Key not established" },
+ { 0x056f03, "Read of scrambled sector without authentication" },
+ { 0x056f04, "Media region code is mismatched to logical unit" },
+ { 0x056f05, "Drive region must be permanent / region reset count error" },
+ { 0x057203, "Session fixation error - incomplete track in session" },
+ { 0x057204, "Empty or partially written reserved track" },
+ { 0x057205, "No more RZONE reservations are allowed" },
+ { 0x05bf00, "Loss of streaming" },
+ { 0x062800, "Not ready to ready transition, medium may have changed" },
+ { 0x062900, "Power on, reset or hardware reset occurred" },
+ { 0x062a00, "Parameters changed" },
+ { 0x062a01, "Mode parameters changed" },
+ { 0x062e00, "Insufficient time for operation" },
+ { 0x063f00, "Logical unit operating conditions have changed" },
+ { 0x063f01, "Microcode has been changed" },
+ { 0x065a00, "Operator request or state change input (unspecified)" },
+ { 0x065a01, "Operator medium removal request" },
+ { 0x0bb900, "Play operation aborted" },
+
+ /* Here we use 0xff for the key (not a valid key) to signify
+ * that these can have _any_ key value associated with them... */
+ { 0xff0401, "Logical unit is in process of becoming ready" },
+ { 0xff0400, "Logical unit not ready, cause not reportable" },
+ { 0xff0402, "Logical unit not ready, initializing command required" },
+ { 0xff0403, "Logical unit not ready, manual intervention required" },
+ { 0xff0500, "Logical unit does not respond to selection" },
+ { 0xff0800, "Logical unit communication failure" },
+ { 0xff0802, "Logical unit communication parity error" },
+ { 0xff0801, "Logical unit communication time-out" },
+ { 0xff2500, "Logical unit not supported" },
+ { 0xff4c00, "Logical unit failed self-configuration" },
+ { 0xff3e00, "Logical unit has not self-configured yet" },
};
#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)