patch-2.2.13 linux/drivers/isdn/hisax/niccy.c

Next file: linux/drivers/isdn/hisax/saphir.c
Previous file: linux/drivers/isdn/hisax/netjet.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.12/linux/drivers/isdn/hisax/niccy.c linux/drivers/isdn/hisax/niccy.c
@@ -40,9 +40,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 #include <linux/pci.h>
-#ifndef COMPAT_HAS_NEW_PCI
-#include <linux/bios32.h>
-#endif
 
 extern const char *CardType[];
 const char *niccy_revision = "$Revision: 1.8 $";
@@ -259,11 +256,7 @@
 	return(0);
 }
 
-#ifdef COMPAT_HAS_NEW_PCI
 static 	struct pci_dev *niccy_dev __initdata = NULL;
-#else
-static  int pci_index __initdata = 0;
-#endif
 
 __initfunc(int
 setup_niccy(struct IsdnCard *card))
@@ -306,7 +299,6 @@
 	} else {
 #if CONFIG_PCI
 		u_int pci_ioaddr;
-#ifdef COMPAT_HAS_NEW_PCI
 		if (!pci_present()) {
 			printk(KERN_ERR "Niccy: no PCI bus present\n");
 			return(0);
@@ -320,66 +312,21 @@
 				return(0);
 			}
 			cs->irq = niccy_dev->irq;
-			if (!get_pcibase(niccy_dev, 0)) {
+			if (!niccy_dev->base_address[ 0]) {
 				printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
 				return(0);
 			}
-			cs->hw.niccy.cfg_reg = get_pcibase(niccy_dev, 0) & PCI_BASE_ADDRESS_IO_MASK;
-			if (!get_pcibase(niccy_dev, 1)) {
+			cs->hw.niccy.cfg_reg = niccy_dev->base_address[ 0] & PCI_BASE_ADDRESS_IO_MASK;
+			if (!niccy_dev->base_address[ 1]) {
 				printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
 				return(0);
 			}
-			pci_ioaddr = get_pcibase(niccy_dev, 1) & PCI_BASE_ADDRESS_IO_MASK;
+			pci_ioaddr = niccy_dev->base_address[ 1] & PCI_BASE_ADDRESS_IO_MASK;
 			cs->subtyp = NICCY_PCI;
 		} else {
 			printk(KERN_WARNING "Niccy: No PCI card found\n");
 			return(0);
 		}
-#else
-		u_char pci_bus, pci_device_fn, pci_irq;
-
-		cs->subtyp = 0;
-		for (; pci_index < 0xff; pci_index++) {
-			if (pcibios_find_device(PCI_VENDOR_DR_NEUHAUS,
-			   PCI_NICCY_ID, pci_index, &pci_bus, &pci_device_fn)
-			   == PCIBIOS_SUCCESSFUL)
-				cs->subtyp = NICCY_PCI;
-			else
-				continue;
-			/* get IRQ */
-			pcibios_read_config_byte(pci_bus, pci_device_fn,
-				PCI_INTERRUPT_LINE, &pci_irq);
-
-			/* get IO pci AMCC address */
-			pcibios_read_config_dword(pci_bus, pci_device_fn,
-				PCI_BASE_ADDRESS_0, &pci_ioaddr);
-			if (!pci_ioaddr) {
-				printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
-				return(0);
-			}
-			cs->hw.niccy.cfg_reg = pci_ioaddr & ~3 ;
-			/* get IO address */
-			pcibios_read_config_dword(pci_bus, pci_device_fn,
-				PCI_BASE_ADDRESS_1, &pci_ioaddr);
-			if (cs->subtyp)
-				break;
-		}
-		if (!cs->subtyp) {
-			printk(KERN_WARNING "Niccy: No PCI card found\n");
-			return(0);
-		}
-		pci_index++;
-		if (!pci_irq) {
-			printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
-			return(0);
-		}
-		if (!pci_ioaddr) {
-			printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
-			return(0);
-		}
-		pci_ioaddr &= ~3; /* remove io/mem flag */
-		cs->irq = pci_irq;
-#endif /* COMPAT_HAS_NEW_PCI */
 		cs->irq_flags |= SA_SHIRQ;
 		cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
 		cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)