patch-2.0.37 linux/drivers/net/wavelan.p.h

• Lines: 113
• Date: Sun Jun 13 10:21:02 1999
• Orig file: v2.0.36/linux/drivers/net/wavelan.p.h
• Orig date: Wed Oct 15 15:23:20 1997

diff -u --recursive --new-file v2.0.36/linux/drivers/net/wavelan.p.h linux/drivers/net/wavelan.p.h
@@ -16,15 +16,9 @@
 /************************** DOCUMENTATION **************************/
 /*
  * This driver provide a Linux interface to the Wavelan ISA hardware
- * The Wavelan is a product of Lucent ("http://wavelan.netland.nl/").
+ * The Wavelan is a product of Lucent ("http://www.wavelan.com/").
  * This division was formerly part of NCR and then AT&T.
- * Wavelan are also distributed by DEC (RoamAbout), Digital Ocean and
- * Aironet (Arlan). If you have one of those product, you will need to
- * make some changes below...
- *
- * This driver is still a beta software. A lot of bugs have been corrected,
- * a lot of functionalities are implemented, the whole appear pretty stable,
- * but there is still some area of improvement (encryption, performance...).
+ * Wavelan are also distributed by DEC (RoamAbout DS) and Digital Ocean.
  *
  * To know how to use this driver, read the NET3 HOWTO.
  * If you want to exploit the many other fonctionalities, look comments
@@ -35,12 +29,22 @@
 
 /* ------------------------ SPECIFIC NOTES ------------------------ */
 /*
+ * Web page
+ * --------
+ *	I try to maintain a web page with the Wireless LAN Howto at :
+ *		http://www-uk.hpl.hp.com/people/jt/Linux/Wavelan.html
+ *
  * wavelan.o is darn too big
  * -------------------------
  *	That's true ! There is a very simple way to reduce the driver
  *	object by 33% (yes !). Comment out the following line :
  *		#include <linux/wireless.h>
  *
+ * Debugging and options
+ * ---------------------
+ *	You will find below a set of '#define" allowing a very fine control
+ *	on the driver behaviour and the debug messages printed.
+ *
  * MAC address and hardware detection :
  * ----------------------------------
  *	The detection code of the wavelan chech that the first 3
@@ -60,23 +64,6 @@
  *	3) Compile & verify
  *	4) Send me the MAC code - I will include it in the next version...
  *
- * "CU Inactive" message at boot up :
- * -----------------------------------
- *	It seem that there is some weird timings problems with the
- *	Intel microcontroler. In fact, this message is triggered by a
- *	bad reading of the on board ram the first time we read the
- *	control block. If you ignore this message, all is ok (but in
- *	fact, currently, it reset the wavelan hardware).
- *
- *	To get rid of that problem, there is two solution. The first
- *	is to add a dummy read of the scb at the end of
- *	wv_82586_config. The second is to add the timers
- *	wv_synchronous_cmd and wv_ack (the udelay just after the
- *	waiting loops - seem that the controler is not totally ready
- *	when it say it is !).
- *
- *	In the current code, I use the second solution (to be
- *	consistent with the original solution of Bruce Janson).
  */
 
 /* --------------------- WIRELESS EXTENSIONS --------------------- */
@@ -271,6 +258,22 @@
  *	- Encryption setting from Brent Elphick (thanks a lot !)
  *	- 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
  *
+ * Other changes (not by me) :
+ * -------------------------
+ *	- Spelling and gramar "rectification".
+ *
+ * Changes made for release in 2.0.37 & 2.2.2 :
+ * ------------------------------------------
+ *	- Correct status in /proc/net/wireless
+ *	- Set PSA CRC to make PtP diagnostic tool happy (Bob Gray)
+ *	- Module init code don't fail if we found at least one card in
+ *	  the address list (Karlis Peisenieks)
+ *	- Missing parenthesis (Christopher Peterson)
+ *	- Correct i82586 configuration parameters
+ *	- Encryption initialisation bug (Robert McCormack)
+ *	- New mac addresses detected in the probe
+ *	- Increase watchdog for busy envirnoments
+ *
  * Wishes & dreams :
  * ---------------
  *	- Roaming
@@ -338,9 +341,9 @@
 
 /* Options : */
 #define USE_PSA_CONFIG		/* Use info from the PSA */
+#define SET_PSA_CRC		/* Calculate and set the CRC on PSA */
 #define IGNORE_NORMAL_XMIT_ERRS	/* Don't bother with normal conditions */
 #undef STRUCT_CHECK		/* Verify padding of structures */
-#undef PSA_CRC			/* Check CRC in PSA */
 #undef OLDIES			/* Old code (to redo) */
 #undef RECORD_SNR		/* To redo */
 #undef EEPROM_IS_PROTECTED	/* Doesn't seem to be necessary */
@@ -355,11 +358,11 @@
 /************************ CONSTANTS & MACROS ************************/
 
 #ifdef DEBUG_VERSION_SHOW
-static const char	*version	= "wavelan.c : v16 (wireless extensions) 17/4/97\n";
+static const char	*version	= "wavelan.c : v18 (wireless extensions) 18/2/99\n";
 #endif
 
 /* Watchdog temporisation */
-#define	WATCHDOG_JIFFIES	32	/* TODO: express in HZ. */
+#define	WATCHDOG_JIFFIES	256	/* TODO: express in HZ. */
 
 /* Macro to get the number of elements in an array */
 #define	NELS(a)				(sizeof(a) / sizeof(a[0]))