patch-2.0.35 linux/drivers/block/paride/dstr.c

Next file: linux/drivers/block/paride/epat.c
Previous file: linux/drivers/block/paride/comm.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.0.34/linux/drivers/block/paride/dstr.c linux/drivers/block/paride/dstr.c
@@ -0,0 +1,243 @@
+/* 
+        dstr.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU public license.
+
+        dstr.c is a low-level protocol driver for the 
+        DataStor EP2000 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define DSTR_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads, 8-bit writes
+                1  8-bit reads and writes
+                2  8-bit EPP mode
+		3  EPP-16
+		4  EPP-32
+*/
+
+#define j44(a,b)  (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+
+#define P1	w2(5);w2(0xd);w2(5);w2(4);
+#define P2	w2(5);w2(7);w2(5);w2(4);
+#define P3      w2(6);w2(4);w2(6);w2(4);
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x20, 0x40 };
+
+static int dstr_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, r;
+
+        r = regr + cont_map[cont];
+
+	w0(0x81); P1;
+	if (pi->mode) { w0(0x11); } else { w0(1); }
+	P2; w0(r); P1;
+
+        switch (pi->mode)  {
+
+        case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+                return j44(a,b);
+
+        case 1: w0(0); w2(0x26); a = r0(); w2(4);
+                return a;
+
+	case 2:
+	case 3:
+        case 4: w2(0x24); a = r4(); w2(4);
+                return a;
+
+        }
+        return -1;
+}       
+
+static void dstr_write_regr(  PIA *pi, int cont, int regr, int val )
+
+{       int  r;
+
+        r = regr + cont_map[cont];
+
+	w0(0x81); P1; 
+	if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+	P2; w0(r); P1;
+	
+        switch (pi->mode)  {
+
+        case 0:
+        case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+		break;
+
+	case 2:
+	case 3:
+        case 4: w4(val); 
+                break;
+        }
+}
+
+#define  CCP(x)  w0(0xff);w2(0xc);w2(4);\
+		 w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
+		 w0(x);w2(5);w2(4);
+
+static void dstr_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(4); CCP(0xe0); w0(0xff);
+}
+
+static void dstr_disconnect ( PIA *pi )
+
+{       CCP(0x30);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void dstr_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        w0(0x81); P1;
+        if (pi->mode) { w0(0x19); } else { w0(9); }
+	P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+        switch (pi->mode) {
+
+        case 0: for (k=0;k<count;k++) {
+                        w2(6); a = r1(); w2(4);
+                        w2(6); b = r1(); w2(4);
+                        buf[k] = j44(a,b);
+                } 
+                break;
+
+        case 1: w0(0);
+                for (k=0;k<count;k++) {
+                        w2(0x26); buf[k] = r0(); w2(0x24);
+                }
+                w2(4);
+                break;
+
+        case 2: w2(0x24); 
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4);
+                break;
+
+        case 3: w2(0x24); 
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4);
+                break;
+
+        case 4: w2(0x24); 
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4);
+                break;
+
+        }
+}
+
+static void dstr_write_block( PIA *pi, char * buf, int count )
+
+{       int	k;
+
+        w0(0x81); P1;
+        if (pi->mode) { w0(0x19); } else { w0(9); }
+        P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1: for (k=0;k<count;k++) {
+                        w2(5); w0(buf[k]); w2(7);
+                }
+                w2(5); w2(4);
+                break;
+
+        case 2: w2(0xc5);
+                for (k=0;k<count;k++) w4(buf[k]);
+		w2(0xc4);
+                break;
+
+        case 3: w2(0xc5);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        case 4: w2(0xc5);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        }
+}
+
+
+static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
+				   "EPP-16","EPP-32"};
+
+        printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
+                pi->device,DSTR_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static void dstr_init_proto( PIA *pi)
+
+{       MOD_INC_USE_COUNT;
+}
+
+static void dstr_release_proto( PIA *pi)
+
+{       MOD_DEC_USE_COUNT;
+}
+
+struct pi_protocol dstr = {"dstr",0,5,2,1,1,
+                           dstr_write_regr,
+                           dstr_read_regr,
+                           dstr_write_block,
+                           dstr_read_block,
+                           dstr_connect,
+                           dstr_disconnect,
+                           0,
+                           0,
+                           0,
+                           dstr_log_adapter,
+                           dstr_init_proto,
+                           dstr_release_proto
+                          };
+
+
+#ifdef MODULE
+
+int     init_module(void)
+
+{       return pi_register( &dstr ) - 1;
+}
+
+void    cleanup_module(void)
+
+{       pi_unregister( &dstr );
+}
+
+#endif
+
+/* end of dstr.c */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov