patch-1.3.78 linux/include/linux/sdla.h

Next file: linux/include/linux/smp.h
Previous file: linux/include/linux/sched.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v1.3.77/linux/include/linux/sdla.h linux/include/linux/sdla.h
@@ -0,0 +1,327 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.10	23 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef SDLA_H
+#define SDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+
+/* largest handlable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+struct sdla_dlci {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status READ */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+#ifndef __KERNEL__
+
+void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet);
+
+#else
+
+/* important Z80 window addresses */
+#define SDLA_CONTROL_WND		0xE000
+
+#define SDLA_502_CMD_BUF		0xEF60
+#define SDLA_502_RCV_BUF		0xA900
+#define	SDLA_502_TXN_AVAIL		0xFFF1
+#define SDLA_502_RCV_AVAIL		0xFFF2
+#define SDLA_502_EVENT_FLAGS		0xFFF3
+#define SDLA_502_MDM_STATUS		0xFFF4
+#define SDLA_502_IRQ_INTERFACE		0xFFFD
+#define SDLA_502_IRQ_PERMISSION		0xFFFE
+#define SDLA_502_DATA_OFS		0x0010
+
+#define SDLA_508_CMD_BUF		0xE000
+#define SDLA_508_TXBUF_INFO		0xF100
+#define SDLA_508_RXBUF_INFO		0xF120
+#define SDLA_508_EVENT_FLAGS		0xF003
+#define SDLA_508_MDM_STATUS		0xF004
+#define SDLA_508_IRQ_INTERFACE		0xF010
+#define SDLA_508_IRQ_PERMISSION		0xF011
+#define SDLA_508_TSE_OFFSET		0xF012
+
+/* Event flags */
+#define SDLA_EVENT_STATUS		0x01
+#define SDLA_EVENT_DLCI_STATUS		0x02
+#define SDLA_EVENT_BAD_DLCI		0x04
+#define SDLA_EVENT_LINK_DOWN		0x40
+
+/* IRQ Trigger flags */
+#define SDLA_INTR_RX			0x01
+#define SDLA_INTR_TX			0x02
+#define SDLA_INTR_MODEM			0x04
+#define SDLA_INTR_COMPLETE		0x08
+#define SDLA_INTR_STATUS		0x10
+#define SDLA_INTR_TIMER			0x20
+
+/* DLCI status bits */
+#define SDLA_DLCI_DELETED		0x01
+#define SDLA_DLCI_ACTIVE		0x02
+#define SDLA_DLCI_WAITING		0x04
+#define SDLA_DLCI_NEW			0x08
+#define SDLA_DLCI_INCLUDED		0x40
+
+/* valid command codes */
+#define	SDLA_INFORMATION_WRITE		0x01
+#define	SDLA_INFORMATION_READ		0x02
+#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
+#define	SDLA_SET_DLCI_CONFIGURATION	0x10
+#define	SDLA_READ_DLCI_CONFIGURATION	0x11
+#define	SDLA_DISABLE_COMMUNICATIONS	0x12
+#define	SDLA_ENABLE_COMMUNICATIONS	0x13
+#define	SDLA_READ_DLC_STATUS		0x14
+#define	SDLA_READ_DLC_STATISTICS	0x15
+#define	SDLA_FLUSH_DLC_STATISTICS	0x16
+#define	SDLA_LIST_ACTIVE_DLCI		0x17
+#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
+#define	SDLA_ADD_DLCI			0x20
+#define	SDLA_DELETE_DLCI		0x21
+#define	SDLA_ACTIVATE_DLCI		0x22
+#define	SDLA_DEACTIVATE_DLCI		0x23
+#define	SDLA_READ_MODEM_STATUS		0x30
+#define	SDLA_SET_MODEM_STATUS		0x31
+#define	SDLA_READ_COMMS_ERR_STATS	0x32
+#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
+#define	SDLA_READ_CODE_VERSION		0x40
+#define SDLA_SET_IRQ_TRIGGER		0x50
+#define SDLA_GET_IRQ_TRIGGER		0x51
+
+/* In channel signal types */
+#define SDLA_ICS_LINK_VERIFY		0x02
+#define SDLA_ICS_STATUS_ENQ		0x03
+
+/* modem status flags */
+#define SDLA_MODEM_DTR_HIGH		0x01
+#define SDLA_MODEM_RTS_HIGH		0x02
+#define SDLA_MODEM_DCD_HIGH		0x08
+#define SDLA_MODEM_CTS_HIGH		0x20
+
+/* used for RET_MODEM interpretation */
+#define SDLA_MODEM_DCD_LOW		0x01
+#define SDLA_MODEM_CTS_LOW		0x02
+
+/* return codes */
+#define SDLA_RET_OK			0x00
+#define SDLA_RET_COMMUNICATIONS		0x01
+#define SDLA_RET_CHANNEL_INACTIVE	0x02
+#define SDLA_RET_DLCI_INACTIVE		0x03
+#define SDLA_RET_DLCI_CONFIG		0x04
+#define SDLA_RET_BUF_TOO_BIG		0x05
+#define SDLA_RET_NO_DATA		0x05
+#define SDLA_RET_BUF_OVERSIZE		0x06
+#define SDLA_RET_CIR_OVERFLOW		0x07
+#define SDLA_RET_NO_BUFF		0x08
+#define SDLA_RET_TIMEOUT		0x0A
+#define SDLA_RET_MODEM			0x10
+#define SDLA_RET_CHANNEL_OFF		0x11
+#define SDLA_RET_CHANNEL_ON		0x12
+#define SDLA_RET_DLCI_STATUS		0x13
+#define SDLA_RET_DLCI_UNKNOWN       	0x14
+#define SDLA_RET_COMMAND_INVALID    	0x1F
+
+/* Configuration flags */
+#define SDLA_DIRECT_RECV		0x0080
+
+/* IRQ selection flags */
+#define SDLA_IRQ_RECEIVE		0x01
+#define SDLA_IRQ_TRANSMIT		0x02
+#define SDLA_IRQ_MODEM_STAT		0x04
+#define SDLA_IRQ_COMMAND		0x08
+#define SDLA_IRQ_CHANNEL		0x10
+#define SDLA_IRQ_TIMER			0x20
+
+/* definitions for PC memory mapping */
+#define SDLA_8K_WINDOW			0x01
+#define SDLA_S502_SEG_A			0x10
+#define SDLA_S502_SEG_C			0x20
+#define SDLA_S502_SEG_D			0x00
+#define SDLA_S502_SEG_E			0x30
+#define SDLA_S507_SEG_A			0x00
+#define SDLA_S507_SEG_B			0x40
+#define SDLA_S507_SEG_C			0x80
+#define SDLA_S507_SEG_E			0xC0
+#define SDLA_S508_SEG_A			0x00
+#define SDLA_S508_SEG_C			0x10
+#define SDLA_S508_SEG_D			0x08
+#define SDLA_S508_SEG_E			0x18
+
+/* SDLA adapter port constants */
+#define SDLA_IO_EXTENTS			0x04
+	
+#define SDLA_REG_CONTROL		0x00
+#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
+#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
+#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
+	
+#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
+#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
+#define SDLA_S508_STS			0x01	/* status reg for 508 */
+#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
+	
+/* control register flags */
+#define SDLA_S502A_START		0x00	/* start the CPU */
+#define SDLA_S502A_INTREQ		0x02
+#define SDLA_S502A_INTEN		0x04
+#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
+#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
+
+#define SDLA_S502E_CPUEN		0x01
+#define SDLA_S502E_ENABLE		0x02
+#define SDLA_S502E_INTACK		0x04
+	
+#define SDLA_S507_ENABLE		0x01
+#define SDLA_S507_IRQ3			0x00
+#define SDLA_S507_IRQ4			0x20
+#define SDLA_S507_IRQ5			0x40
+#define SDLA_S507_IRQ7			0x60
+#define SDLA_S507_IRQ10			0x80
+#define SDLA_S507_IRQ11			0xA0
+#define SDLA_S507_IRQ12			0xC0
+#define SDLA_S507_IRQ15			0xE0
+	
+#define SDLA_HALT			0x00
+#define SDLA_CPUEN			0x02
+#define SDLA_MEMEN			0x04
+#define SDLA_S507_EPROMWR		0x08
+#define SDLA_S507_EPROMCLK		0x10
+#define SDLA_S508_INTRQ			0x08
+#define SDLA_S508_INTEN			0x10
+
+struct sdla_cmd {
+   char  opp_flag		__attribute__((packed));
+   char  cmd			__attribute__((packed));
+   short length			__attribute__((packed));
+   char  retval			__attribute__((packed));
+   short dlci			__attribute__((packed));
+   char  flags			__attribute__((packed));
+   short rxlost_int		__attribute__((packed));
+   long  rxlost_app		__attribute__((packed));
+   char  reserve[2]		__attribute__((packed));
+   char  data[SDLA_MAX_DATA]	__attribute__((packed));	/* transfer data buffer */
+};
+
+struct intr_info {
+   char  flags		__attribute__((packed));
+   short txlen		__attribute__((packed));
+   char  irq		__attribute__((packed));
+   char  flags2		__attribute__((packed));
+   short timeout	__attribute__((packed));
+};
+
+/* found in the 508's control window at RXBUF_INFO */
+struct buf_info {
+   unsigned short rse_num	__attribute__((packed));
+   unsigned long  rse_base	__attribute__((packed));
+   unsigned long  rse_next	__attribute__((packed));
+   unsigned long  buf_base	__attribute__((packed));
+   unsigned short reserved	__attribute__((packed));
+   unsigned long  buf_top	__attribute__((packed));
+};
+
+/* structure pointed to by rse_base in RXBUF_INFO struct */
+struct buf_entry {
+   char  opp_flag	__attribute__((packed));
+   short length		__attribute__((packed));
+   short dlci		__attribute__((packed));
+   char  flags		__attribute__((packed));
+   short timestamp	__attribute__((packed));
+   short reserved[2]	__attribute__((packed));
+   long  buf_addr	__attribute__((packed));
+};
+
+#endif
+
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov with Sam's (original) version
of this