patch-2.3.99-pre1 linux/drivers/block/ide_modes.h

• Lines: 234
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.3.51/linux/drivers/block/ide_modes.h
• Orig date: Fri Mar 10 16:40:42 2000

diff -u --recursive --new-file v2.3.51/linux/drivers/block/ide_modes.h linux/drivers/block/ide_modes.h
@@ -1,233 +0,0 @@
-/*
- *  linux/drivers/block/ide_modes.h
- *
- *  Copyright (C) 1996  Linus Torvalds, Igor Abramov, and Mark Lord
- */
-
-#ifndef _IDE_MODES_H
-#define _IDE_MODES_H
-
-#include <linux/config.h>
-
-/*
- * Shared data/functions for determining best PIO mode for an IDE drive.
- * Most of this stuff originally lived in cmd640.c, and changes to the
- * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
- * breaking the fragile cmd640.c support.
- */
-
-#ifdef CONFIG_BLK_DEV_IDE_MODES
-
-/*
- * Standard (generic) timings for PIO modes, from ATA2 specification.
- * These timings are for access to the IDE data port register *only*.
- * Some drives may specify a mode, while also specifying a different
- * value for cycle_time (from drive identification data).
- */
-typedef struct ide_pio_timings_s {
-	int	setup_time;	/* Address setup (ns) minimum */
-	int	active_time;	/* Active pulse (ns) minimum */
-	int	cycle_time;	/* Cycle time (ns) minimum = (setup + active + recovery) */
-} ide_pio_timings_t;
-
-typedef struct ide_pio_data_s {
-	byte pio_mode;
-	byte use_iordy;
-	byte overridden;
-	byte blacklisted;
-	unsigned int cycle_time;
-} ide_pio_data_t;
-	
-#ifndef _IDE_C
-
-int ide_scan_pio_blacklist (char *model);
-byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d);
-extern const ide_pio_timings_t ide_pio_timings[6];
-
-#else /* _IDE_C */
-
-const ide_pio_timings_t ide_pio_timings[6] = {
-	{ 70,	165,	600 },	/* PIO Mode 0 */
-	{ 50,	125,	383 },	/* PIO Mode 1 */
-	{ 30,	100,	240 },	/* PIO Mode 2 */
-	{ 30,	80,	180 },	/* PIO Mode 3 with IORDY */
-	{ 25,	70,	120 },	/* PIO Mode 4 with IORDY */
-	{ 20,	50,	100 }	/* PIO Mode 5 with IORDY (nonstandard) */
-};
-
-/*
- * Black list. Some drives incorrectly report their maximal PIO mode,
- * at least in respect to CMD640. Here we keep info on some known drives.
- */
-static struct ide_pio_info {
-	const char	*name;
-	int		pio;
-} ide_pio_blacklist [] = {
-/*	{ "Conner Peripherals 1275MB - CFS1275A", 4 }, */
-	{ "Conner Peripherals 540MB - CFS540A", 3 },
-
-	{ "WDC AC2700",  3 },
-	{ "WDC AC2540",  3 },
-	{ "WDC AC2420",  3 },
-	{ "WDC AC2340",  3 },
-	{ "WDC AC2250",  0 },
-	{ "WDC AC2200",  0 },
-	{ "WDC AC21200", 4 },
-	{ "WDC AC2120",  0 },
-	{ "WDC AC2850",  3 },
-	{ "WDC AC1270",  3 },
-	{ "WDC AC1170",  1 },
-	{ "WDC AC1210",  1 },
-	{ "WDC AC280",   0 },
-/*	{ "WDC AC21000", 4 }, */
-	{ "WDC AC31000", 3 },
-	{ "WDC AC31200", 3 },
-/*	{ "WDC AC31600", 4 }, */
-
-	{ "Maxtor 7131 AT", 1 },
-	{ "Maxtor 7171 AT", 1 },
-	{ "Maxtor 7213 AT", 1 },
-	{ "Maxtor 7245 AT", 1 },
-	{ "Maxtor 7345 AT", 1 },
-	{ "Maxtor 7546 AT", 3 },
-	{ "Maxtor 7540 AV", 3 },
-
-	{ "SAMSUNG SHD-3121A", 1 },
-	{ "SAMSUNG SHD-3122A", 1 },
-	{ "SAMSUNG SHD-3172A", 1 },
-
-/*	{ "ST51080A", 4 },
- *	{ "ST51270A", 4 },
- *	{ "ST31220A", 4 },
- *	{ "ST31640A", 4 },
- *	{ "ST32140A", 4 },
- *	{ "ST3780A",  4 },
- */
-	{ "ST5660A",  3 },
-	{ "ST3660A",  3 },
-	{ "ST3630A",  3 },
-	{ "ST3655A",  3 },
-	{ "ST3391A",  3 },
-	{ "ST3390A",  1 },
-	{ "ST3600A",  1 },
-	{ "ST3290A",  0 },
-	{ "ST3144A",  0 },
-	{ "ST3491A",  1 },	/* reports 3, should be 1 or 2 (depending on */	
-				/* drive) according to Seagates FIND-ATA program */
-
-	{ "QUANTUM ELS127A", 0 },
-	{ "QUANTUM ELS170A", 0 },
-	{ "QUANTUM LPS240A", 0 },
-	{ "QUANTUM LPS210A", 3 },
-	{ "QUANTUM LPS270A", 3 },
-	{ "QUANTUM LPS365A", 3 },
-	{ "QUANTUM LPS540A", 3 },
-	{ "QUANTUM LIGHTNING 540A", 3 },
-	{ "QUANTUM LIGHTNING 730A", 3 },
-	{ "QUANTUM FIREBALL", 3 }, /* For models 540/640/1080/1280 */
-				   /* 1080A works fine in mode4 with triton */
-	{ NULL,	0 }
-};
-
-/*
- * This routine searches the ide_pio_blacklist for an entry
- * matching the start/whole of the supplied model name.
- *
- * Returns -1 if no match found.
- * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
- */
-int ide_scan_pio_blacklist (char *model)
-{
-	struct ide_pio_info *p;
-
-	for (p = ide_pio_blacklist; p->name != NULL; p++) {
-		if (strncmp(p->name, model, strlen(p->name)) == 0)
-			return p->pio;
-	}
-	return -1;
-}
-
-/*
- * This routine returns the recommended PIO settings for a given drive,
- * based on the drive->id information and the ide_pio_blacklist[].
- * This is used by most chipset support modules when "auto-tuning".
- */
-
-/*
- * Drive PIO mode auto selection
- */
-byte ide_get_best_pio_mode (ide_drive_t *drive, byte mode_wanted, byte max_mode, ide_pio_data_t *d)
-{
-	int pio_mode;
-	int cycle_time = 0;
-	int use_iordy = 0;
-	struct hd_driveid* id = drive->id;
-	int overridden  = 0;
-	int blacklisted = 0;
-
-	if (mode_wanted != 255) {
-		pio_mode = mode_wanted;
-	} else if (!drive->id) {
-		pio_mode = 0;
-	} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
-		overridden = 1;
-		blacklisted = 1;
-		use_iordy = (pio_mode > 2);
-	} else {
-		pio_mode = id->tPIO;
-		if (pio_mode > 2) {	/* 2 is maximum allowed tPIO value */
-			pio_mode = 2;
-			overridden = 1;
-		}
-		if (id->field_valid & 2) {	  /* drive implements ATA2? */
-			if (id->capability & 8) { /* drive supports use_iordy? */
-				use_iordy = 1;
-				cycle_time = id->eide_pio_iordy;
-				if (id->eide_pio_modes & 7) {
-					overridden = 0;
-					if (id->eide_pio_modes & 4)
-						pio_mode = 5;
-					else if (id->eide_pio_modes & 2)
-						pio_mode = 4;
-					else
-						pio_mode = 3;
-				}
-			} else {
-				cycle_time = id->eide_pio;
-			}
-		}
-
-#if 0
-		if (drive->id->major_rev_num & 0x0004) printf("ATA-2 ");
-#endif
-
-		/*
-		 * Conservative "downgrade" for all pre-ATA2 drives
-		 */
-		if (pio_mode && pio_mode < 4) {
-			pio_mode--;
-			overridden = 1;
-#if 0
-			use_iordy = (pio_mode > 2);
-#endif
-			if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
-				cycle_time = 0; /* use standard timing */
-		}
-	}
-	if (pio_mode > max_mode) {
-		pio_mode = max_mode;
-		cycle_time = 0;
-	}
-	if (d) {
-		d->pio_mode = pio_mode;
-		d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
-		d->use_iordy = use_iordy;
-		d->overridden = overridden;
-		d->blacklisted = blacklisted;
-	}
-	return pio_mode;
-}
-
-#endif /* _IDE_C */
-#endif /* CONFIG_BLK_DEV_IDE_MODES */
-#endif /* _IDE_MODES_H */