patch-2.3.41 linux/Documentation/Configure.help

• Lines: 182
• Date: Thu Jan 27 07:40:16 2000
• Orig file: v2.3.40/linux/Documentation/Configure.help
• Orig date: Fri Jan 21 18:19:15 2000

diff -u --recursive --new-file v2.3.40/linux/Documentation/Configure.help linux/Documentation/Configure.help
@@ -4350,15 +4350,6 @@
   does not work correctly without modification please contact the
   author by email at ipslinux@us.ibm.com.
 
-IBM ServeRAID Support
-CONFIG_SCSI_IPS
-  This is support for the IBM ServeRAID hardware RAID controllers.
-  Consult the SCSI-HOWTO, available via anonymous FTP from
-  ftp://metalab.unc.edu/pub/Linux/docs/HOWTO, and the file
-  README.ips in drivers/scsi for more information.  If this driver
-  does not work correctly without modification please contact the
-  author by email at ipslinux@us.ibm.com.
-
 BusLogic SCSI support
 CONFIG_SCSI_BUSLOGIC
   This is support for BusLogic MultiMaster and FlashPoint SCSI Host
@@ -7937,8 +7928,8 @@
   The module will be called usb-uhci.o. If you want to compile it as a
   module, say M here and read Documentation/modules.txt.
   
-OHCI-HCD (Compaq, iMacs, OPTi, SiS, ALi, ...) support?
-CONFIG_USB_OHCI_HCD
+OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support?
+CONFIG_USB_OHCI
   The Open Host Controller Interface is a standard by
   Compaq/Microsoft/National for accessing the USB PC hardware (also
   called USB host controller). If your USB host controller conforms
@@ -7947,11 +7938,11 @@
   chipsets - like SiS (actual 610, 610 and so on) or ALi (ALi IV, ALi V,
   Aladdin Pro..) - conform to this standard.
 
-  You may want to read the file Documentation/usb/ohci-hcd.txt.
+  You may want to read the file Documentation/usb/ohci.txt.
 
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
-  The module will be called usb-ohci-hcd.o. If you want to compile it
+  The module will be called usb-ohci.o. If you want to compile it
   as a module, say M here and read Documentation/modules.txt.
 
 USB Human Interface Device (HID) support
@@ -8001,6 +7992,21 @@
   into one misc device. If you say N, you'll have a separate
   device for each your USB mouse.
 
+Support for digitizers
+CONFIG_INPUT_MOUSEDEV_DIGITIZER
+  Use this if you have a digitizer that doesn't emulate a mouse
+  itself, and want to use it as a mouse.
+
+Horizontal screen resolution
+CONFIG_INPUT_MOUSEDEV_SCREEN_X
+  For the mouse emulation to be correct, the mousedev driver needs
+  to know the screen resolution you are using (in X). 
+
+Vertical screen resolution
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y
+  For the mouse emulation to be correct, the mousedev driver needs
+  to know the screen resolution you are using (in X). 
+
 Joystick support
 CONFIG_INPUT_JOYDEV
   Say Y here if you want your USB HID joystick or gamepad to be
@@ -8098,17 +8104,47 @@
   Say Y here if you want to connect this type of camera to your
   computer's USB port.
 
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  http://roadrunner.swansea.uk.linux.org/v4l.shtml .
+
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
   The module will be called cpia.o. If you want to compile it as a
   module, say M here and read Documentation/modules.txt.
 
+USB IBM (Xirlink) C-It Camera support
+CONFIG_USB_IBMCAM
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  http://roadrunner.swansea.uk.linux.org/v4l.shtml .
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ibmcam.o. If you want to compile it as a
+  module, say M here and read Documentation/modules.txt. This camera
+  has several configuration options which can be specified when you
+  load the module. Read Documentation/usb/ibmcam.txt to learn more.
+
 USB OV511 Camera support
 CONFIG_USB_OV511
   Say Y here if you want to connect this type of camera to your
   computer's USB port. See Documentation/usb/ov511.txt for more
   information and for a list of supported cameras.
   
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  http://roadrunner.swansea.uk.linux.org/v4l.shtml .
+
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
   The module will be called ov511.o. If you want to compile it as a
@@ -8126,20 +8162,20 @@
   The module will be called dc2xx.o. If you want to compile it as a
   module, say M here and read Documentation/modules.txt.
 
-USB SCSI (mass storage) support
-CONFIG_USB_SCSI
+USB Mass Storage support
+CONFIG_USB_STORAGE
   Say Y here if you want to connect USB mass storage devices to your
   computer's USB port.
 
   This code is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).
-  The module will be called usb-scsi.o. If you want to compile it as a
-  module, say M here and read Documentation/modules.txt.
+  The module will be called usb-storage.o. If you want to compile it
+  as a module, say M here and read Documentation/modules.txt.
 
-USB SCSI verbose debug
-CONFIG_USB_SCSI_DEBUG
-  Say Y here in order to have the USB SCSI code generate verbose
-  debugging messages.
+USB Mass Storage verbose debug
+CONFIG_USB_STORAGE_DEBUG
+  Say Y here in order to have the USB Mass Storage code generate
+  verbose debugging messages.
 
 USS720 parport driver
 CONFIG_USB_USS720
@@ -10513,9 +10549,10 @@
   major number 10 and minor number 135 using mknod ("man mknod"), you
   will get access to the real time clock built into your computer.
   Every PC has such a clock built in. It can be used to generate
-  signals from as low as 1Hz up to 8192Hz, and can also be used as a
-  24 hour alarm. It reports status information via the file /proc/rtc
-  and its behaviour is set by various ioctls on /dev/rtc.
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
 
   If you run Linux on a multiprocessor machine and said Y to
   "Symmetric Multi Processing" above, you should say Y here to read
@@ -11815,6 +11852,11 @@
 
   Say Y here unless you are building a special purpose kernel.
 
+JavaStation OS Flash SIMM (EXPERIMENTAL)
+CONFIG_SUN_JSFLASH
+  This option enables a driver for JavaStation OS Flash driver.
+  Say N unless you want to boot from your Flash SIMM.
+
 #Siemens SAB82532 serial support
 #CONFIG_SAB82532
 ###
@@ -12194,13 +12236,11 @@
   use a Toshiba CD-ROM drive; otherwise, the option is not needed and
   would impact performance a bit, so say N.
 
-Hades SCSI DMA emulator (EXPERIMENTAL)
+Hades SCSI DMA emulator
 CONFIG_TT_DMA_EMUL
   This option enables code which emulates the TT SCSI DMA chip on the
   Hades. This increases the SCSI transfer rates at least ten times
-  compared to PIO transfers. Note that this code is experimental and
-  has only been tested on a Hades with a 68060 processor. Before you
-  use this, make backups of your entire hard disk.
+  compared to PIO transfers.
 
 Ariadne support
 CONFIG_ARIADNE