patch-2.0.34 linux/arch/alpha/kernel/smc.c
Next file: linux/arch/alpha/kernel/t2.c
Previous file: linux/arch/alpha/kernel/signal.c
Back to the patch index
Back to the overall index
- Lines: 2843
- Date:
Wed Jun 3 15:17:46 1998
- Orig file:
v2.0.33/linux/arch/alpha/kernel/smc.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.0.33/linux/arch/alpha/kernel/smc.c linux/arch/alpha/kernel/smc.c
@@ -0,0 +1,2842 @@
+/*
+ * SMC 37C93X and 37C669 initialization code
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#if 0
+# define DBG_DEVS(args) printk args
+#else
+# define DBG_DEVS(args)
+#endif
+
+#include <linux/bios32.h>
+#include <linux/pci.h>
+#include <linux/malloc.h>
+#include <linux/mm.h>
+
+#include <asm/hwrpb.h>
+#include <asm/io.h>
+#include <asm/segment.h>
+
+#define KB 1024
+#define MB (1024*KB)
+#define GB (1024*MB)
+
+#if defined(CONFIG_ALPHA_PC164) || defined(CONFIG_ALPHA_LX164)
+
+/* device "activate" register contents */
+#define DEVICE_ON 1
+#define DEVICE_OFF 0
+
+/* configuration on/off keys */
+#define CONFIG_ON_KEY 0x55
+#define CONFIG_OFF_KEY 0xaa
+
+/* configuration space device definitions */
+#define FDC 0
+#define IDE1 1
+#define IDE2 2
+#define PARP 3
+#define SER1 4
+#define SER2 5
+#define RTCL 6
+#define KYBD 7
+#define AUXIO 8
+
+/* Chip register offsets from base */
+#define CONFIG_CONTROL 0x02
+#define INDEX_ADDRESS 0x03
+#define LOGICAL_DEVICE_NUMBER 0x07
+#define DEVICE_ID 0x20
+#define DEVICE_REV 0x21
+#define POWER_CONTROL 0x22
+#define POWER_MGMT 0x23
+#define OSC 0x24
+
+#define ACTIVATE 0x30
+#define ADDR_HI 0x60
+#define ADDR_LO 0x61
+#define INTERRUPT_SEL 0x70
+#define INTERRUPT_SEL_2 0x72 /* KYBD/MOUS only */
+#define DMA_CHANNEL_SEL 0x74 /* FDC/PARP only */
+
+#define FDD_MODE_REGISTER 0x90
+#define FDD_OPTION_REGISTER 0x91
+
+/* values that we read back that are expected ... */
+#define VALID_DEVICE_ID 2
+
+/* default device addresses */
+#define KYBD_INTERRUPT 1
+#define MOUS_INTERRUPT 12
+#define COM2_BASE 0x2f8
+#define COM2_INTERRUPT 3
+#define COM1_BASE 0x3f8
+#define COM1_INTERRUPT 4
+#define PARP_BASE 0x3bc
+#define PARP_INTERRUPT 7
+
+#define SMC_DEBUG 0
+
+unsigned long SMCConfigState( unsigned long baseAddr )
+{
+ unsigned char devId;
+ unsigned char devRev;
+
+ unsigned long configPort;
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ configPort = indexPort = baseAddr;
+ dataPort = ( unsigned long )( ( char * )configPort + 1 );
+
+ outb(CONFIG_ON_KEY, configPort);
+ outb(CONFIG_ON_KEY, configPort);
+ outb(DEVICE_ID, indexPort);
+ devId = inb(dataPort);
+ if ( devId == VALID_DEVICE_ID ) {
+ outb(DEVICE_REV, indexPort);
+ devRev = inb(dataPort);
+ }
+ else {
+ baseAddr = 0;
+ }
+ return( baseAddr );
+}
+
+void SMCRunState( unsigned long baseAddr )
+{
+ outb(CONFIG_OFF_KEY, baseAddr);
+}
+
+unsigned long SMCDetectUltraIO(void)
+{
+ unsigned long baseAddr;
+
+ baseAddr = 0x3F0;
+ if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
+ return( baseAddr );
+ }
+ baseAddr = 0x370;
+ if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
+ return( baseAddr );
+ }
+ return( ( unsigned long )0 );
+}
+
+void SMCEnableDevice( unsigned long baseAddr,
+ unsigned long device,
+ unsigned long portaddr,
+ unsigned long interrupt)
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ indexPort = baseAddr;
+ dataPort = ( unsigned long )( ( char * )baseAddr + 1 );
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(device, dataPort);
+
+ outb(ADDR_LO, indexPort);
+ outb(( portaddr & 0xFF ), dataPort);
+
+ outb(ADDR_HI, indexPort);
+ outb(( ( portaddr >> 8 ) & 0xFF ), dataPort);
+
+ outb(INTERRUPT_SEL, indexPort);
+ outb(interrupt, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+void SMCEnableKYBD( unsigned long baseAddr )
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ indexPort = baseAddr;
+ dataPort = ( unsigned long )( ( char * )baseAddr + 1 );
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(KYBD, dataPort);
+
+ outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+ outb(KYBD_INTERRUPT, dataPort);
+
+ outb(INTERRUPT_SEL_2, indexPort);/* Secondary interrupt select */
+ outb(MOUS_INTERRUPT, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+void SMCEnableFDC( unsigned long baseAddr )
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+
+ unsigned char oldValue;
+
+ indexPort = baseAddr;
+ dataPort = ( unsigned long )( ( char * )baseAddr + 1 );
+
+ outb(LOGICAL_DEVICE_NUMBER, indexPort);
+ outb(FDC, dataPort);
+
+ outb(FDD_MODE_REGISTER, indexPort);
+ oldValue = inb(dataPort);
+
+ oldValue |= 0x0E; /* Enable burst mode */
+ outb(oldValue, dataPort);
+
+ outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
+ outb(0x06, dataPort );
+
+ outb(DMA_CHANNEL_SEL, indexPort); /* DMA channel select */
+ outb(0x02, dataPort);
+
+ outb(ACTIVATE, indexPort);
+ outb(DEVICE_ON, dataPort);
+}
+
+#if SMC_DEBUG
+void SMCReportDeviceStatus( unsigned long baseAddr )
+{
+ unsigned long indexPort;
+ unsigned long dataPort;
+ unsigned char currentControl;
+
+ indexPort = baseAddr;
+ dataPort = ( unsigned long )( ( char * )baseAddr + 1 );
+
+ outb(POWER_CONTROL, indexPort);
+ currentControl = inb(dataPort);
+
+ if ( currentControl & ( 1 << FDC ) )
+ printk( "\t+FDC Enabled\n" );
+ else
+ printk( "\t-FDC Disabled\n" );
+
+ if ( currentControl & ( 1 << IDE1 ) )
+ printk( "\t+IDE1 Enabled\n" );
+ else
+ printk( "\t-IDE1 Disabled\n" );
+
+ if ( currentControl & ( 1 << IDE2 ) )
+ printk( "\t+IDE2 Enabled\n" );
+ else
+ printk( "\t-IDE2 Disabled\n" );
+
+ if ( currentControl & ( 1 << PARP ) )
+ printk( "\t+PARP Enabled\n" );
+ else
+ printk( "\t-PARP Disabled\n" );
+
+ if ( currentControl & ( 1 << SER1 ) )
+ printk( "\t+SER1 Enabled\n" );
+ else
+ printk( "\t-SER1 Disabled\n" );
+
+ if ( currentControl & ( 1 << SER2 ) )
+ printk( "\t+SER2 Enabled\n" );
+ else
+ printk( "\t-SER2 Disabled\n" );
+
+ printk( "\n" );
+}
+#endif
+
+void SMC93X_Init(void)
+{
+ unsigned long SMCUltraBase;
+
+ if ( ( SMCUltraBase = SMCDetectUltraIO( ) ) != ( unsigned long )0 ) {
+ printk( "SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
+ SMCUltraBase );
+#if SMC_DEBUG
+ SMCReportDeviceStatus( SMCUltraBase );
+#endif
+ SMCEnableDevice( SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT );
+ SMCEnableDevice( SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT );
+ SMCEnableDevice( SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT );
+ /* IDE on the SMC is not enabled; CMD646 (PCI) on MB */
+ SMCEnableKYBD( SMCUltraBase );
+ SMCEnableFDC( SMCUltraBase );
+#if SMC_DEBUG
+ SMCReportDeviceStatus( SMCUltraBase );
+#endif
+ SMCRunState( SMCUltraBase );
+ }
+ else {
+#if SMC_DEBUG
+ printk( "No SMC FDC37C93X Ultra I/O Controller found\n" );
+#endif
+ }
+}
+
+#endif /* PC164 || LX164 */
+
+/* we include MIATA because the GL has the SMC669 on board */
+#if defined(CONFIG_ALPHA_SX164) || defined(CONFIG_ALPHA_MIATA)
+
+#define SMC_DEBUG 0
+
+/* File: smcc669_def.h
+ *
+ * Copyright (C) 1997 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ * All rights reserved.
+ *
+ * This software is furnished under a license and may be used and copied
+ * only in accordance of the terms of such license and with the
+ * inclusion of the above copyright notice. This software or any other
+ * copies thereof may not be provided or otherwise made available to any
+ * other person. No title to and ownership of the software is hereby
+ * transferred.
+ *
+ * The information in this software is subject to change without notice
+ * and should not be construed as a commitment by Digital Equipment
+ * Corporation.
+ *
+ * Digital assumes no responsibility for the use or reliability of its
+ * software on equipment which is not supplied by Digital.
+ *
+ *
+ * Abstract:
+ *
+ * This file contains header definitions for the SMC37c669
+ * Super I/O controller.
+ *
+ * Author:
+ *
+ * Eric Rasmussen
+ *
+ * Modification History:
+ *
+ * er 28-Jan-1997 Initial Entry
+ */
+
+#ifndef __SMC37c669_H
+#define __SMC37c669_H
+
+/*
+** Macros for handling device IRQs
+**
+** The mask acts as a flag used in mapping actual ISA IRQs (0 - 15)
+** to device IRQs (A - H).
+*/
+#define SMC37c669_DEVICE_IRQ_MASK 0x80000000
+#define SMC37c669_DEVICE_IRQ( __i ) \
+ ((SMC37c669_DEVICE_IRQ_MASK) | (__i))
+#define SMC37c669_IS_DEVICE_IRQ(__i) \
+ (((__i) & (SMC37c669_DEVICE_IRQ_MASK)) == (SMC37c669_DEVICE_IRQ_MASK))
+#define SMC37c669_RAW_DEVICE_IRQ(__i) \
+ ((__i) & ~(SMC37c669_DEVICE_IRQ_MASK))
+
+/*
+** Macros for handling device DRQs
+**
+** The mask acts as a flag used in mapping actual ISA DMA
+** channels to device DMA channels (A - C).
+*/
+#define SMC37c669_DEVICE_DRQ_MASK 0x80000000
+#define SMC37c669_DEVICE_DRQ(__d) \
+ ((SMC37c669_DEVICE_DRQ_MASK) | (__d))
+#define SMC37c669_IS_DEVICE_DRQ(__d) \
+ (((__d) & (SMC37c669_DEVICE_DRQ_MASK)) == (SMC37c669_DEVICE_DRQ_MASK))
+#define SMC37c669_RAW_DEVICE_DRQ(__d) \
+ ((__d) & ~(SMC37c669_DEVICE_DRQ_MASK))
+
+#define SMC37c669_DEVICE_ID 0x3
+
+/*
+** SMC37c669 Device Function Definitions
+*/
+#define SERIAL_0 0
+#define SERIAL_1 1
+#define PARALLEL_0 2
+#define FLOPPY_0 3
+#define IDE_0 4
+#define NUM_FUNCS 5
+
+/*
+** Default Device Function Mappings
+*/
+#define COM1_BASE 0x3F8
+#define COM1_IRQ 4
+#define COM2_BASE 0x2F8
+#define COM2_IRQ 3
+#define PARP_BASE 0x3BC
+#define PARP_IRQ 7
+#define PARP_DRQ 3
+#define FDC_BASE 0x3F0
+#define FDC_IRQ 6
+#define FDC_DRQ 2
+
+/*
+** Configuration On/Off Key Definitions
+*/
+#define SMC37c669_CONFIG_ON_KEY 0x55
+#define SMC37c669_CONFIG_OFF_KEY 0xAA
+
+/*
+** SMC 37c669 Device IRQs
+*/
+#define SMC37c669_DEVICE_IRQ_A ( SMC37c669_DEVICE_IRQ( 0x01 ) )
+#define SMC37c669_DEVICE_IRQ_B ( SMC37c669_DEVICE_IRQ( 0x02 ) )
+#define SMC37c669_DEVICE_IRQ_C ( SMC37c669_DEVICE_IRQ( 0x03 ) )
+#define SMC37c669_DEVICE_IRQ_D ( SMC37c669_DEVICE_IRQ( 0x04 ) )
+#define SMC37c669_DEVICE_IRQ_E ( SMC37c669_DEVICE_IRQ( 0x05 ) )
+#define SMC37c669_DEVICE_IRQ_F ( SMC37c669_DEVICE_IRQ( 0x06 ) )
+/* SMC37c669_DEVICE_IRQ_G *** RESERVED ***/
+#define SMC37c669_DEVICE_IRQ_H ( SMC37c669_DEVICE_IRQ( 0x08 ) )
+
+/*
+** SMC 37c669 Device DMA Channel Definitions
+*/
+#define SMC37c669_DEVICE_DRQ_A ( SMC37c669_DEVICE_DRQ( 0x01 ) )
+#define SMC37c669_DEVICE_DRQ_B ( SMC37c669_DEVICE_DRQ( 0x02 ) )
+#define SMC37c669_DEVICE_DRQ_C ( SMC37c669_DEVICE_DRQ( 0x03 ) )
+
+/*
+** Configuration Register Index Definitions
+*/
+#define SMC37c669_CR00_INDEX 0x00
+#define SMC37c669_CR01_INDEX 0x01
+#define SMC37c669_CR02_INDEX 0x02
+#define SMC37c669_CR03_INDEX 0x03
+#define SMC37c669_CR04_INDEX 0x04
+#define SMC37c669_CR05_INDEX 0x05
+#define SMC37c669_CR06_INDEX 0x06
+#define SMC37c669_CR07_INDEX 0x07
+#define SMC37c669_CR08_INDEX 0x08
+#define SMC37c669_CR09_INDEX 0x09
+#define SMC37c669_CR0A_INDEX 0x0A
+#define SMC37c669_CR0B_INDEX 0x0B
+#define SMC37c669_CR0C_INDEX 0x0C
+#define SMC37c669_CR0D_INDEX 0x0D
+#define SMC37c669_CR0E_INDEX 0x0E
+#define SMC37c669_CR0F_INDEX 0x0F
+#define SMC37c669_CR10_INDEX 0x10
+#define SMC37c669_CR11_INDEX 0x11
+#define SMC37c669_CR12_INDEX 0x12
+#define SMC37c669_CR13_INDEX 0x13
+#define SMC37c669_CR14_INDEX 0x14
+#define SMC37c669_CR15_INDEX 0x15
+#define SMC37c669_CR16_INDEX 0x16
+#define SMC37c669_CR17_INDEX 0x17
+#define SMC37c669_CR18_INDEX 0x18
+#define SMC37c669_CR19_INDEX 0x19
+#define SMC37c669_CR1A_INDEX 0x1A
+#define SMC37c669_CR1B_INDEX 0x1B
+#define SMC37c669_CR1C_INDEX 0x1C
+#define SMC37c669_CR1D_INDEX 0x1D
+#define SMC37c669_CR1E_INDEX 0x1E
+#define SMC37c669_CR1F_INDEX 0x1F
+#define SMC37c669_CR20_INDEX 0x20
+#define SMC37c669_CR21_INDEX 0x21
+#define SMC37c669_CR22_INDEX 0x22
+#define SMC37c669_CR23_INDEX 0x23
+#define SMC37c669_CR24_INDEX 0x24
+#define SMC37c669_CR25_INDEX 0x25
+#define SMC37c669_CR26_INDEX 0x26
+#define SMC37c669_CR27_INDEX 0x27
+#define SMC37c669_CR28_INDEX 0x28
+#define SMC37c669_CR29_INDEX 0x29
+
+/*
+** Configuration Register Alias Definitions
+*/
+#define SMC37c669_DEVICE_ID_INDEX SMC37c669_CR0D_INDEX
+#define SMC37c669_DEVICE_REVISION_INDEX SMC37c669_CR0E_INDEX
+#define SMC37c669_FDC_BASE_ADDRESS_INDEX SMC37c669_CR20_INDEX
+#define SMC37c669_IDE_BASE_ADDRESS_INDEX SMC37c669_CR21_INDEX
+#define SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX SMC37c669_CR22_INDEX
+#define SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX SMC37c669_CR23_INDEX
+#define SMC37c669_SERIAL0_BASE_ADDRESS_INDEX SMC37c669_CR24_INDEX
+#define SMC37c669_SERIAL1_BASE_ADDRESS_INDEX SMC37c669_CR25_INDEX
+#define SMC37c669_PARALLEL_FDC_DRQ_INDEX SMC37c669_CR26_INDEX
+#define SMC37c669_PARALLEL_FDC_IRQ_INDEX SMC37c669_CR27_INDEX
+#define SMC37c669_SERIAL_IRQ_INDEX SMC37c669_CR28_INDEX
+
+/*
+** Configuration Register Definitions
+**
+** The INDEX (write only) and DATA (read/write) ports are effective
+** only when the chip is in the Configuration State.
+*/
+typedef struct _SMC37c669_CONFIG_REGS {
+ unsigned char index_port;
+ unsigned char data_port;
+} SMC37c669_CONFIG_REGS;
+
+/*
+** CR00 - default value 0x28
+**
+** IDE_EN (CR00<1:0>):
+** 0x - 30ua pull-ups on nIDEEN, nHDCS0, NHDCS1
+** 11 - IRQ_H available as IRQ output,
+** IRRX2, IRTX2 available as alternate IR pins
+** 10 - nIDEEN, nHDCS0, nHDCS1 used to control IDE
+**
+** VALID (CR00<7>):
+** A high level on this software controlled bit can
+** be used to indicate that a valid configuration
+** cycle has occurred. The control software must
+** take care to set this bit at the appropriate times.
+** Set to zero after power up. This bit has no
+** effect on any other hardware in the chip.
+**
+*/
+typedef union _SMC37c669_CR00 {
+ unsigned char as_uchar;
+ struct {
+ unsigned ide_en : 2; /* See note above */
+ unsigned reserved1 : 1; /* RAZ */
+ unsigned fdc_pwr : 1; /* 1 = supply power to FDC */
+ unsigned reserved2 : 3; /* Read as 010b */
+ unsigned valid : 1; /* See note above */
+ } by_field;
+} SMC37c669_CR00;
+
+/*
+** CR01 - default value 0x9C
+*/
+typedef union _SMC37c669_CR01 {
+ unsigned char as_uchar;
+ struct {
+ unsigned reserved1 : 2; /* RAZ */
+ unsigned ppt_pwr : 1; /* 1 = supply power to PPT */
+ unsigned ppt_mode : 1; /* 1 = Printer mode, 0 = EPP */
+ unsigned reserved2 : 1; /* Read as 1 */
+ unsigned reserved3 : 2; /* RAZ */
+ unsigned lock_crx: 1; /* Lock CR00 - CR18 */
+ } by_field;
+} SMC37c669_CR01;
+
+/*
+** CR02 - default value 0x88
+*/
+typedef union _SMC37c669_CR02 {
+ unsigned char as_uchar;
+ struct {
+ unsigned reserved1 : 3; /* RAZ */
+ unsigned uart1_pwr : 1; /* 1 = supply power to UART1 */
+ unsigned reserved2 : 3; /* RAZ */
+ unsigned uart2_pwr : 1; /* 1 = supply power to UART2 */
+ } by_field;
+} SMC37c669_CR02;
+
+/*
+** CR03 - default value 0x78
+**
+** CR03<7> CR03<2> Pin 94
+** ------- ------- ------
+** 0 X DRV2 (input)
+** 1 0 ADRX
+** 1 1 IRQ_B
+**
+** CR03<6> CR03<5> Op Mode
+** ------- ------- -------
+** 0 0 Model 30
+** 0 1 PS/2
+** 1 0 Reserved
+** 1 1 AT Mode
+*/
+typedef union _SMC37c669_CR03 {
+ unsigned char as_uchar;
+ struct {
+ unsigned pwrgd_gamecs : 1; /* 1 = PWRGD, 0 = GAMECS */
+ unsigned fdc_mode2 : 1; /* 1 = Enhanced Mode 2 */
+ unsigned pin94_0 : 1; /* See note above */
+ unsigned reserved1 : 1; /* RAZ */
+ unsigned drvden : 1; /* 1 = high, 0 - output */
+ unsigned op_mode : 2; /* See note above */
+ unsigned pin94_1 : 1; /* See note above */
+ } by_field;
+} SMC37c669_CR03;
+
+/*
+** CR04 - default value 0x00
+**
+** PP_EXT_MODE:
+** If CR01<PP_MODE> = 0 and PP_EXT_MODE =
+** 00 - Standard and Bidirectional
+** 01 - EPP mode and SPP
+** 10 - ECP mode
+** In this mode, 2 drives can be supported
+** directly, 3 or 4 drives must use external
+** 4 drive support. SPP can be selected
+** through the ECR register of ECP as mode 000.
+** 11 - ECP mode and EPP mode
+** In this mode, 2 drives can be supported
+** directly, 3 or 4 drives must use external
+** 4 drive support. SPP can be selected
+** through the ECR register of ECP as mode 000.
+** In this mode, EPP can be selected through
+** the ECR register of ECP as mode 100.
+**
+** PP_FDC:
+** 00 - Normal
+** 01 - PPFD1
+** 10 - PPFD2
+** 11 - Reserved
+**
+** MIDI1:
+** Serial Clock Select:
+** A low level on this bit disables MIDI support,
+** clock = divide by 13. A high level on this
+** bit enables MIDI support, clock = divide by 12.
+**
+** MIDI operates at 31.25 Kbps which can be derived
+** from 125 KHz (24 MHz / 12 = 2 MHz, 2 MHz / 16 = 125 KHz)
+**
+** ALT_IO:
+** 0 - Use pins IRRX, IRTX
+** 1 - Use pins IRRX2, IRTX2
+**
+** If this bit is set, the IR receive and transmit
+** functions will not be available on pins 25 and 26
+** unless CR00<IDE_EN> = 11.
+*/
+typedef union _SMC37c669_CR04 {
+ unsigned char as_uchar;
+ struct {
+ unsigned ppt_ext_mode : 2; /* See note above */
+ unsigned ppt_fdc : 2; /* See note above */
+ unsigned midi1 : 1; /* See note above */
+ unsigned midi2 : 1; /* See note above */
+ unsigned epp_type : 1; /* 0 = EPP 1.9, 1 = EPP 1.7 */
+ unsigned alt_io : 1; /* See note above */
+ } by_field;
+} SMC37c669_CR04;
+
+/*
+** CR05 - default value 0x00
+**
+** DEN_SEL:
+** 00 - Densel output normal
+** 01 - Reserved
+** 10 - Densel output 1
+** 11 - Densel output 0
+**
+*/
+typedef union _SMC37c669_CR05 {
+ unsigned char as_uchar;
+ struct {
+ unsigned reserved1 : 2; /* RAZ */
+ unsigned fdc_dma_mode : 1; /* 0 = burst, 1 = non-burst */
+ unsigned den_sel : 2; /* See note above */
+ unsigned swap_drv : 1; /* Swap the FDC motor selects */
+ unsigned extx4 : 1; /* 0 = 2 drive, 1 = external 4 drive decode */
+ unsigned reserved2 : 1; /* RAZ */
+ } by_field;
+} SMC37c669_CR05;
+
+/*
+** CR06 - default value 0xFF
+*/
+typedef union _SMC37c669_CR06 {
+ unsigned char as_uchar;
+ struct {
+ unsigned floppy_a : 2; /* Type of floppy drive A */
+ unsigned floppy_b : 2; /* Type of floppy drive B */
+ unsigned floppy_c : 2; /* Type of floppy drive C */
+ unsigned floppy_d : 2; /* Type of floppy drive D */
+ } by_field;
+} SMC37c669_CR06;
+
+/*
+** CR07 - default value 0x00
+**
+** Auto Power Management CR07<7:4>:
+** 0 - Auto Powerdown disabled (default)
+** 1 - Auto Powerdown enabled
+**
+** This bit is reset to the default state by POR or
+** a hardware reset.
+**
+*/
+typedef union _SMC37c669_CR07 {
+ unsigned char as_uchar;
+ struct {
+ unsigned floppy_boot : 2; /* 0 = A:, 1 = B: */
+ unsigned reserved1 : 2; /* RAZ */
+ unsigned ppt_en : 1; /* See note above */
+ unsigned uart1_en : 1; /* See note above */
+ unsigned uart2_en : 1; /* See note above */
+ unsigned fdc_en : 1; /* See note above */
+ } by_field;
+} SMC37c669_CR07;
+
+/*
+** CR08 - default value 0x00
+*/
+typedef union _SMC37c669_CR08 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 4; /* 0 */
+ unsigned addrx7_4 : 4; /* ADR<7:3> for ADRx decode */
+ } by_field;
+} SMC37c669_CR08;
+
+/*
+** CR09 - default value 0x00
+**
+** ADRx_CONFIG:
+** 00 - ADRx disabled
+** 01 - 1 byte decode A<3:0> = 0000b
+** 10 - 8 byte block decode A<3:0> = 0XXXb
+** 11 - 16 byte block decode A<3:0> = XXXXb
+**
+*/
+typedef union _SMC37c669_CR09 {
+ unsigned char as_uchar;
+ struct {
+ unsigned adra8 : 3; /* ADR<10:8> for ADRx decode */
+ unsigned reserved1 : 3;
+ unsigned adrx_config : 2; /* See note above */
+ } by_field;
+} SMC37c669_CR09;
+
+/*
+** CR0A - default value 0x00
+*/
+typedef union _SMC37c669_CR0A {
+ unsigned char as_uchar;
+ struct {
+ unsigned ecp_fifo_threshold : 4;
+ unsigned reserved1 : 4;
+ } by_field;
+} SMC37c669_CR0A;
+
+/*
+** CR0B - default value 0x00
+*/
+typedef union _SMC37c669_CR0B {
+ unsigned char as_uchar;
+ struct {
+ unsigned fdd0_drtx : 2; /* FDD0 Data Rate Table */
+ unsigned fdd1_drtx : 2; /* FDD1 Data Rate Table */
+ unsigned fdd2_drtx : 2; /* FDD2 Data Rate Table */
+ unsigned fdd3_drtx : 2; /* FDD3 Data Rate Table */
+ } by_field;
+} SMC37c669_CR0B;
+
+/*
+** CR0C - default value 0x00
+**
+** UART2_MODE:
+** 000 - Standard (default)
+** 001 - IrDA (HPSIR)
+** 010 - Amplitude Shift Keyed IR @500 KHz
+** 011 - Reserved
+** 1xx - Reserved
+**
+*/
+typedef union _SMC37c669_CR0C {
+ unsigned char as_uchar;
+ struct {
+ unsigned uart2_rcv_polarity : 1; /* 1 = invert RX */
+ unsigned uart2_xmit_polarity : 1; /* 1 = invert TX */
+ unsigned uart2_duplex : 1; /* 1 = full, 0 = half */
+ unsigned uart2_mode : 3; /* See note above */
+ unsigned uart1_speed : 1; /* 1 = high speed enabled */
+ unsigned uart2_speed : 1; /* 1 = high speed enabled */
+ } by_field;
+} SMC37c669_CR0C;
+
+/*
+** CR0D - default value 0x03
+**
+** Device ID Register - read only
+*/
+typedef union _SMC37c669_CR0D {
+ unsigned char as_uchar;
+ struct {
+ unsigned device_id : 8; /* Returns 0x3 in this field */
+ } by_field;
+} SMC37c669_CR0D;
+
+/*
+** CR0E - default value 0x02
+**
+** Device Revision Register - read only
+*/
+typedef union _SMC37c669_CR0E {
+ unsigned char as_uchar;
+ struct {
+ unsigned device_rev : 8; /* Returns 0x2 in this field */
+ } by_field;
+} SMC37c669_CR0E;
+
+/*
+** CR0F - default value 0x00
+*/
+typedef union _SMC37c669_CR0F {
+ unsigned char as_uchar;
+ struct {
+ unsigned test0 : 1; /* Reserved - set to 0 */
+ unsigned test1 : 1; /* Reserved - set to 0 */
+ unsigned test2 : 1; /* Reserved - set to 0 */
+ unsigned test3 : 1; /* Reserved - set t0 0 */
+ unsigned test4 : 1; /* Reserved - set to 0 */
+ unsigned test5 : 1; /* Reserved - set t0 0 */
+ unsigned test6 : 1; /* Reserved - set t0 0 */
+ unsigned test7 : 1; /* Reserved - set to 0 */
+ } by_field;
+} SMC37c669_CR0F;
+
+/*
+** CR10 - default value 0x00
+*/
+typedef union _SMC37c669_CR10 {
+ unsigned char as_uchar;
+ struct {
+ unsigned reserved1 : 3; /* RAZ */
+ unsigned pll_gain : 1; /* 1 = 3V, 2 = 5V operation */
+ unsigned pll_stop : 1; /* 1 = stop PLLs */
+ unsigned ace_stop : 1; /* 1 = stop UART clocks */
+ unsigned pll_clock_ctrl : 1; /* 0 = 14.318 MHz, 1 = 24 MHz */
+ unsigned ir_test : 1; /* Enable IR test mode */
+ } by_field;
+} SMC37c669_CR10;
+
+/*
+** CR11 - default value 0x00
+*/
+typedef union _SMC37c669_CR11 {
+ unsigned char as_uchar;
+ struct {
+ unsigned ir_loopback : 1; /* Internal IR loop back */
+ unsigned test_10ms : 1; /* Test 10ms autopowerdown FDC timeout */
+ unsigned reserved1 : 6; /* RAZ */
+ } by_field;
+} SMC37c669_CR11;
+
+/*
+** CR12 - CR1D are reserved registers
+*/
+
+/*
+** CR1E - default value 0x80
+**
+** GAMECS:
+** 00 - GAMECS disabled
+** 01 - 1 byte decode ADR<3:0> = 0001b
+** 10 - 8 byte block decode ADR<3:0> = 0XXXb
+** 11 - 16 byte block decode ADR<3:0> = XXXXb
+**
+*/
+typedef union _SMC37c66_CR1E {
+ unsigned char as_uchar;
+ struct {
+ unsigned gamecs_config: 2; /* See note above */
+ unsigned gamecs_addr9_4 : 6; /* GAMECS Addr<9:4> */
+ } by_field;
+} SMC37c669_CR1E;
+
+/*
+** CR1F - default value 0x00
+**
+** DT0 DT1 DRVDEN0 DRVDEN1 Drive Type
+** --- --- ------- ------- ----------
+** 0 0 DENSEL DRATE0 4/2/1 MB 3.5"
+** 2/1 MB 5.25"
+** 2/1.6/1 MB 3.5" (3-mode)
+** 0 1 DRATE1 DRATE0
+** 1 0 nDENSEL DRATE0 PS/2
+** 1 1 DRATE0 DRATE1
+**
+** Note: DENSEL, DRATE1, and DRATE0 map onto two output
+** pins - DRVDEN0 and DRVDEN1.
+**
+*/
+typedef union _SMC37c669_CR1F {
+ unsigned char as_uchar;
+ struct {
+ unsigned fdd0_drive_type : 2; /* FDD0 drive type */
+ unsigned fdd1_drive_type : 2; /* FDD1 drive type */
+ unsigned fdd2_drive_type : 2; /* FDD2 drive type */
+ unsigned fdd3_drive_type : 2; /* FDD3 drive type */
+ } by_field;
+} SMC37c669_CR1F;
+
+/*
+** CR20 - default value 0x3C
+**
+** FDC Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0, A<3:0> = 0XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR20 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 2; /* 0 */
+ unsigned addr9_4 : 6; /* FDC Addr<9:4> */
+ } by_field;
+} SMC37c669_CR20;
+
+/*
+** CR21 - default value 0x3C
+**
+** IDE Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0, A<3:0> = 0XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR21 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 2; /* 0 */
+ unsigned addr9_4 : 6; /* IDE Addr<9:4> */
+ } by_field;
+} SMC37c669_CR21;
+
+/*
+** CR22 - default value 0x3D
+**
+** IDE Alternate Status Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0, A<3:0> = 0110b to access.
+**
+*/
+typedef union _SMC37c669_CR22 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 2; /* 0 */
+ unsigned addr9_4 : 6; /* IDE Alt Status Addr<9:4> */
+ } by_field;
+} SMC37c669_CR22;
+
+/*
+** CR23 - default value 0x00
+**
+** Parallel Port Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0 to access.
+** - If EPP is enabled, A<2:0> = XXXb to access.
+** If EPP is NOT enabled, A<1:0> = XXb to access
+**
+*/
+typedef union _SMC37c669_CR23 {
+ unsigned char as_uchar;
+ struct {
+ unsigned addr9_2 : 8; /* Parallel Port Addr<9:2> */
+ } by_field;
+} SMC37c669_CR23;
+
+/*
+** CR24 - default value 0x00
+**
+** UART1 Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0, A<2:0> = XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR24 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 1; /* 0 */
+ unsigned addr9_3 : 7; /* UART1 Addr<9:3> */
+ } by_field;
+} SMC37c669_CR24;
+
+/*
+** CR25 - default value 0x00
+**
+** UART2 Base Address Register
+** - To disable this decode set Addr<9:8> = 0
+** - A<10> = 0, A<2:0> = XXXb to access.
+**
+*/
+typedef union _SMC37c669_CR25 {
+ unsigned char as_uchar;
+ struct {
+ unsigned zero : 1; /* 0 */
+ unsigned addr9_3 : 7; /* UART2 Addr<9:3> */
+ } by_field;
+} SMC37c669_CR25;
+
+/*
+** CR26 - default value 0x00
+**
+** Parallel Port / FDC DMA Select Register
+**
+** D3 - D0 DMA
+** D7 - D4 Selected
+** ------- --------
+** 0000 None
+** 0001 DMA_A
+** 0010 DMA_B
+** 0011 DMA_C
+**
+*/
+typedef union _SMC37c669_CR26 {
+ unsigned char as_uchar;
+ struct {
+ unsigned ppt_drq : 4; /* See note above */
+ unsigned fdc_drq : 4; /* See note above */
+ } by_field;
+} SMC37c669_CR26;
+
+/*
+** CR27 - default value 0x00
+**
+** Parallel Port / FDC IRQ Select Register
+**
+** D3 - D0 IRQ
+** D7 - D4 Selected
+** ------- --------
+** 0000 None
+** 0001 IRQ_A
+** 0010 IRQ_B
+** 0011 IRQ_C
+** 0100 IRQ_D
+** 0101 IRQ_E
+** 0110 IRQ_F
+** 0111 Reserved
+** 1000 IRQ_H
+**
+** Any unselected IRQ REQ is in tristate
+**
+*/
+typedef union _SMC37c669_CR27 {
+ unsigned char as_uchar;
+ struct {
+ unsigned ppt_irq : 4; /* See note above */
+ unsigned fdc_irq : 4; /* See note above */
+ } by_field;
+} SMC37c669_CR27;
+
+/*
+** CR28 - default value 0x00
+**
+** UART IRQ Select Register
+**
+** D3 - D0 IRQ
+** D7 - D4 Selected
+** ------- --------
+** 0000 None
+** 0001 IRQ_A
+** 0010 IRQ_B
+** 0011 IRQ_C
+** 0100 IRQ_D
+** 0101 IRQ_E
+** 0110 IRQ_F
+** 0111 Reserved
+** 1000 IRQ_H
+** 1111 share with UART1 (only for UART2)
+**
+** Any unselected IRQ REQ is in tristate
+**
+** To share an IRQ between UART1 and UART2, set
+** UART1 to use the desired IRQ and set UART2 to
+** 0xF to enable sharing mechanism.
+**
+*/
+typedef union _SMC37c669_CR28 {
+ unsigned char as_uchar;
+ struct {
+ unsigned uart2_irq : 4; /* See note above */
+ unsigned uart1_irq : 4; /* See note above */
+ } by_field;
+} SMC37c669_CR28;
+
+/*
+** CR29 - default value 0x00
+**
+** IRQIN IRQ Select Register
+**
+** D3 - D0 IRQ
+** D7 - D4 Selected
+** ------- --------
+** 0000 None
+** 0001 IRQ_A
+** 0010 IRQ_B
+** 0011 IRQ_C
+** 0100 IRQ_D
+** 0101 IRQ_E
+** 0110 IRQ_F
+** 0111 Reserved
+** 1000 IRQ_H
+**
+** Any unselected IRQ REQ is in tristate
+**
+*/
+typedef union _SMC37c669_CR29 {
+ unsigned char as_uchar;
+ struct {
+ unsigned irqin_irq : 4; /* See note above */
+ unsigned reserved1 : 4; /* RAZ */
+ } by_field;
+} SMC37c669_CR29;
+
+/*
+** Aliases of Configuration Register formats (should match
+** the set of index aliases).
+**
+** Note that CR24 and CR25 have the same format and are the
+** base address registers for UART1 and UART2. Because of
+** this we only define 1 alias here - for CR24 - as the serial
+** base address register.
+**
+** Note that CR21 and CR22 have the same format and are the
+** base address and alternate status address registers for
+** the IDE controller. Because of this we only define 1 alias
+** here - for CR21 - as the IDE address register.
+**
+*/
+typedef SMC37c669_CR0D SMC37c669_DEVICE_ID_REGISTER;
+typedef SMC37c669_CR0E SMC37c669_DEVICE_REVISION_REGISTER;
+typedef SMC37c669_CR20 SMC37c669_FDC_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR21 SMC37c669_IDE_ADDRESS_REGISTER;
+typedef SMC37c669_CR23 SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR24 SMC37c669_SERIAL_BASE_ADDRESS_REGISTER;
+typedef SMC37c669_CR26 SMC37c669_PARALLEL_FDC_DRQ_REGISTER;
+typedef SMC37c669_CR27 SMC37c669_PARALLEL_FDC_IRQ_REGISTER;
+typedef SMC37c669_CR28 SMC37c669_SERIAL_IRQ_REGISTER;
+
+/*
+** ISA/Device IRQ Translation Table Entry Definition
+*/
+typedef struct _SMC37c669_IRQ_TRANSLATION_ENTRY {
+ int device_irq;
+ int isa_irq;
+} SMC37c669_IRQ_TRANSLATION_ENTRY;
+
+/*
+** ISA/Device DMA Translation Table Entry Definition
+*/
+typedef struct _SMC37c669_DRQ_TRANSLATION_ENTRY {
+ int device_drq;
+ int isa_drq;
+} SMC37c669_DRQ_TRANSLATION_ENTRY;
+
+/*
+** External Interface Function Prototype Declarations
+*/
+
+SMC37c669_CONFIG_REGS *SMC37c669_detect(
+ void
+);
+
+unsigned int SMC37c669_enable_device(
+ unsigned int func
+);
+
+unsigned int SMC37c669_disable_device(
+ unsigned int func
+);
+
+unsigned int SMC37c669_configure_device(
+ unsigned int func,
+ int port,
+ int irq,
+ int drq
+);
+
+void SMC37c669_display_device_info(
+ void
+);
+
+#endif /* __SMC37c669_H */
+
+/* file: smcc669.c
+ *
+ * Copyright (C) 1997 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ * All rights reserved.
+ *
+ * This software is furnished under a license and may be used and copied
+ * only in accordance of the terms of such license and with the
+ * inclusion of the above copyright notice. This software or any other
+ * copies thereof may not be provided or otherwise made available to any
+ * other person. No title to and ownership of the software is hereby
+ * transferred.
+ *
+ * The information in this software is subject to change without notice
+ * and should not be construed as a commitment by digital equipment
+ * corporation.
+ *
+ * Digital assumes no responsibility for the use or reliability of its
+ * software on equipment which is not supplied by digital.
+ */
+
+/*
+ *++
+ * FACILITY:
+ *
+ * Alpha SRM Console Firmware
+ *
+ * MODULE DESCRIPTION:
+ *
+ * SMC37c669 Super I/O controller configuration routines.
+ *
+ * AUTHORS:
+ *
+ * Eric Rasmussen
+ *
+ * CREATION DATE:
+ *
+ * 28-Jan-1997
+ *
+ * MODIFICATION HISTORY:
+ *
+ * er 01-May-1997 Fixed pointer conversion errors in
+ * SMC37c669_get_device_config().
+ * er 28-Jan-1997 Initial version.
+ *
+ *--
+ */
+#if 0
+/* $INCLUDE_OPTIONS$ */
+#include "cp$inc:platform_io.h"
+/* $INCLUDE_OPTIONS_END$ */
+#include "cp$src:common.h"
+#include "cp$inc:prototypes.h"
+#include "cp$src:kernel_def.h"
+#include "cp$src:msg_def.h"
+#include "cp$src:smcc669_def.h"
+/* Platform-specific includes */
+#include "cp$src:platform.h"
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define wb( _x_, _y_ ) outb( _y_, (unsigned int)((unsigned long)_x_) )
+#define rb( _x_ ) inb( (unsigned int)((unsigned long)_x_) )
+
+/*
+** Local storage for device configuration information.
+**
+** Since the SMC37c669 does not provide an explicit
+** mechanism for enabling/disabling individual device
+** functions, other than unmapping the device, local
+** storage for device configuration information is
+** allocated here for use in implementing our own
+** function enable/disable scheme.
+*/
+static struct DEVICE_CONFIG {
+ unsigned int port1;
+ unsigned int port2;
+ unsigned int irq;
+ unsigned int drq;
+} local_config [NUM_FUNCS];
+
+/*
+** List of all possible addresses for the Super I/O chip
+*/
+static unsigned long SMC37c669_Addresses[] =
+ {
+ 0x3F0UL, /* Primary address */
+ 0x370UL, /* Secondary address */
+ 0UL /* End of list */
+ };
+
+/*
+** Global Pointer to the Super I/O device
+*/
+static SMC37c669_CONFIG_REGS *SMC37c669 = NULL;
+
+/*
+** IRQ Translation Table
+**
+** The IRQ translation table is a list of SMC37c669 device
+** and standard ISA IRQs.
+**
+*/
+static SMC37c669_IRQ_TRANSLATION_ENTRY *SMC37c669_irq_table;
+
+/*
+** The following definition is for the default IRQ
+** translation table.
+*/
+static SMC37c669_IRQ_TRANSLATION_ENTRY SMC37c669_default_irq_table[ ] =
+ {
+ { SMC37c669_DEVICE_IRQ_A, -1 },
+ { SMC37c669_DEVICE_IRQ_B, -1 },
+ { SMC37c669_DEVICE_IRQ_C, 7 },
+ { SMC37c669_DEVICE_IRQ_D, 6 },
+ { SMC37c669_DEVICE_IRQ_E, 4 },
+ { SMC37c669_DEVICE_IRQ_F, 3 },
+ { SMC37c669_DEVICE_IRQ_H, -1 },
+ { -1, -1 } /* End of table */
+ };
+
+/*
+** DRQ Translation Table
+**
+** The DRQ translation table is a list of SMC37c669 device and
+** ISA DMA channels.
+**
+*/
+static SMC37c669_DRQ_TRANSLATION_ENTRY *SMC37c669_drq_table;
+
+/*
+** The following definition is the default DRQ
+** translation table.
+*/
+static SMC37c669_DRQ_TRANSLATION_ENTRY SMC37c669_default_drq_table[ ] =
+ {
+ { SMC37c669_DEVICE_DRQ_A, 2 },
+ { SMC37c669_DEVICE_DRQ_B, 3 },
+ { SMC37c669_DEVICE_DRQ_C, -1 },
+ { -1, -1 } /* End of table */
+ };
+
+/*
+** Local Function Prototype Declarations
+*/
+
+static unsigned int SMC37c669_is_device_enabled(
+ unsigned int func
+);
+
+#if 0
+static unsigned int SMC37c669_get_device_config(
+ unsigned int func,
+ int *port,
+ int *irq,
+ int *drq
+);
+#endif
+
+static void SMC37c669_config_mode(
+ unsigned int enable
+);
+
+static unsigned char SMC37c669_read_config(
+ unsigned char index
+);
+
+static void SMC37c669_write_config(
+ unsigned char index,
+ unsigned char data
+);
+
+static void SMC37c669_init_local_config( void );
+
+static struct DEVICE_CONFIG *SMC37c669_get_config(
+ unsigned int func
+);
+
+static int SMC37c669_xlate_irq(
+ unsigned int irq
+);
+
+static int SMC37c669_xlate_drq(
+ unsigned int drq
+);
+
+#if 0
+/*
+** External Data Declarations
+*/
+
+extern struct LOCK spl_atomic;
+
+/*
+** External Function Prototype Declarations
+*/
+
+/* From kernel_alpha.mar */
+extern spinlock(
+ struct LOCK *spl
+);
+
+extern spinunlock(
+ struct LOCK *spl
+);
+
+/* From filesys.c */
+int allocinode(
+ char *name,
+ int can_create,
+ struct INODE **ipp
+);
+
+extern int null_procedure( void );
+
+int smcc669_init( void );
+int smcc669_open( struct FILE *fp, char *info, char *next, char *mode );
+int smcc669_read( struct FILE *fp, int size, int number, unsigned char *buf );
+int smcc669_write( struct FILE *fp, int size, int number, unsigned char *buf );
+int smcc669_close( struct FILE *fp );
+
+struct DDB smc_ddb = {
+ "smc", /* how this routine wants to be called */
+ smcc669_read, /* read routine */
+ smcc669_write, /* write routine */
+ smcc669_open, /* open routine */
+ smcc669_close, /* close routine */
+ null_procedure, /* name expansion routine */
+ null_procedure, /* delete routine */
+ null_procedure, /* create routine */
+ null_procedure, /* setmode */
+ null_procedure, /* validation routine */
+ 0, /* class specific use */
+ 1, /* allows information */
+ 0, /* must be stacked */
+ 0, /* is a flash update driver */
+ 0, /* is a block device */
+ 0, /* not seekable */
+ 0, /* is an ethernet device */
+ 0, /* is a filesystem driver */
+};
+#endif
+
+#define spinlock(x)
+#define spinunlock(x)
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function detects the presence of an SMC37c669 Super I/O
+** controller.
+**
+** FORMAL PARAMETERS:
+**
+** None
+**
+** RETURN VALUE:
+**
+** Returns a pointer to the device if found, otherwise,
+** the NULL pointer is returned.
+**
+** SIDE EFFECTS:
+**
+** None
+**
+**--
+*/
+SMC37c669_CONFIG_REGS *SMC37c669_detect( void )
+{
+ int i;
+ SMC37c669_DEVICE_ID_REGISTER id;
+
+ for ( i = 0; SMC37c669_Addresses[i] != 0; i++ ) {
+/*
+** Initialize the device pointer even though we don't yet know if
+** the controller is at this address. The support functions access
+** the controller through this device pointer so we need to set it
+** even when we are looking ...
+*/
+ SMC37c669 = ( SMC37c669_CONFIG_REGS * )SMC37c669_Addresses[i];
+/*
+** Enter configuration mode
+*/
+ SMC37c669_config_mode( TRUE );
+/*
+** Read the device id
+*/
+ id.as_uchar = SMC37c669_read_config( SMC37c669_DEVICE_ID_INDEX );
+/*
+** Exit configuration mode
+*/
+ SMC37c669_config_mode( FALSE );
+/*
+** Does the device id match? If so, assume we have found an
+** SMC37c669 controller at this address.
+*/
+ if ( id.by_field.device_id == SMC37c669_DEVICE_ID ) {
+/*
+** Initialize the IRQ and DRQ translation tables.
+*/
+ SMC37c669_irq_table = SMC37c669_default_irq_table;
+ SMC37c669_drq_table = SMC37c669_default_drq_table;
+/*
+** erfix
+**
+** If the platform can't use the IRQ and DRQ defaults set up in this
+** file, it should call a platform-specific external routine at this
+** point to reset the IRQ and DRQ translation table pointers to point
+** at the appropriate tables for the platform. If the defaults are
+** acceptable, then the external routine should do nothing.
+*/
+
+/*
+** Put the chip back into configuration mode
+*/
+ SMC37c669_config_mode( TRUE );
+/*
+** Initialize local storage for configuration information
+*/
+ SMC37c669_init_local_config( );
+/*
+** Exit configuration mode
+*/
+ SMC37c669_config_mode( FALSE );
+/*
+** SMC37c669 controller found, break out of search loop
+*/
+ break;
+ }
+ else {
+/*
+** Otherwise, we did not find an SMC37c669 controller at this
+** address so set the device pointer to NULL.
+*/
+ SMC37c669 = NULL;
+ }
+ }
+ return SMC37c669;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function enables an SMC37c669 device function.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which device function to enable
+**
+** RETURN VALUE:
+**
+** Returns TRUE is the device function was enabled, otherwise, FALSE
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+** DESIGN:
+**
+** Enabling a device function in the SMC37c669 controller involves
+** setting all of its mappings (port, irq, drq ...). A local
+** "shadow" copy of the device configuration is kept so we can
+** just set each mapping to what the local copy says.
+**
+** This function ALWAYS updates the local shadow configuration of
+** the device function being enabled, even if the device is always
+** enabled. To avoid replication of code, functions such as
+** configure_device set up the local copy and then call this
+** function to the update the real device.
+**
+**--
+*/
+unsigned int SMC37c669_enable_device ( unsigned int func )
+{
+ unsigned int ret_val = FALSE;
+/*
+** Put the device into configuration mode
+*/
+ SMC37c669_config_mode( TRUE );
+ switch ( func ) {
+ case SERIAL_0:
+ {
+ SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Enable the serial 1 IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+ irq.by_field.uart1_irq =
+ SMC37c669_RAW_DEVICE_IRQ(
+ SMC37c669_xlate_irq( local_config[ func ].irq )
+ );
+
+ SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Enable the serial 1 port base address mapping
+*/
+ base_addr.as_uchar = 0;
+ base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
+
+ SMC37c669_write_config(
+ SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case SERIAL_1:
+ {
+ SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Enable the serial 2 IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+ irq.by_field.uart2_irq =
+ SMC37c669_RAW_DEVICE_IRQ(
+ SMC37c669_xlate_irq( local_config[ func ].irq )
+ );
+
+ SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Enable the serial 2 port base address mapping
+*/
+ base_addr.as_uchar = 0;
+ base_addr.by_field.addr9_3 = local_config[ func ].port1 >> 3;
+
+ SMC37c669_write_config(
+ SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case PARALLEL_0:
+ {
+ SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+ SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Enable the parallel port DMA channel mapping
+*/
+ drq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+ drq.by_field.ppt_drq =
+ SMC37c669_RAW_DEVICE_DRQ(
+ SMC37c669_xlate_drq( local_config[ func ].drq )
+ );
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+ drq.as_uchar
+ );
+/*
+** Enable the parallel port IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+ irq.by_field.ppt_irq =
+ SMC37c669_RAW_DEVICE_IRQ(
+ SMC37c669_xlate_irq( local_config[ func ].irq )
+ );
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+ irq.as_uchar
+ );
+/*
+** Enable the parallel port base address mapping
+*/
+ base_addr.as_uchar = 0;
+ base_addr.by_field.addr9_2 = local_config[ func ].port1 >> 2;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case FLOPPY_0:
+ {
+ SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+ SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Enable the floppy controller DMA channel mapping
+*/
+ drq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+ drq.by_field.fdc_drq =
+ SMC37c669_RAW_DEVICE_DRQ(
+ SMC37c669_xlate_drq( local_config[ func ].drq )
+ );
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+ drq.as_uchar
+ );
+/*
+** Enable the floppy controller IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+ irq.by_field.fdc_irq =
+ SMC37c669_RAW_DEVICE_IRQ(
+ SMC37c669_xlate_irq( local_config[ func ].irq )
+ );
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+ irq.as_uchar
+ );
+/*
+** Enable the floppy controller base address mapping
+*/
+ base_addr.as_uchar = 0;
+ base_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
+
+ SMC37c669_write_config(
+ SMC37c669_FDC_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case IDE_0:
+ {
+ SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
+/*
+** Enable the IDE alternate status base address mapping
+*/
+ ide_addr.as_uchar = 0;
+ ide_addr.by_field.addr9_4 = local_config[ func ].port2 >> 4;
+
+ SMC37c669_write_config(
+ SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
+ ide_addr.as_uchar
+ );
+/*
+** Enable the IDE controller base address mapping
+*/
+ ide_addr.as_uchar = 0;
+ ide_addr.by_field.addr9_4 = local_config[ func ].port1 >> 4;
+
+ SMC37c669_write_config(
+ SMC37c669_IDE_BASE_ADDRESS_INDEX,
+ ide_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ }
+/*
+** Exit configuration mode and return
+*/
+ SMC37c669_config_mode( FALSE );
+
+ return ret_val;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function disables a device function within the
+** SMC37c669 Super I/O controller.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which function to disable
+**
+** RETURN VALUE:
+**
+** Return TRUE if the device function was disabled, otherwise, FALSE
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+** DESIGN:
+**
+** Disabling a function in the SMC37c669 device involves
+** disabling all the function's mappings (port, irq, drq ...).
+** A shadow copy of the device configuration is maintained
+** in local storage so we won't worry aboving saving the
+** current configuration information.
+**
+**--
+*/
+unsigned int SMC37c669_disable_device ( unsigned int func )
+{
+ unsigned int ret_val = FALSE;
+
+/*
+** Put the device into configuration mode
+*/
+ SMC37c669_config_mode( TRUE );
+ switch ( func ) {
+ case SERIAL_0:
+ {
+ SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Disable the serial 1 IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+ irq.by_field.uart1_irq = 0;
+
+ SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Disable the serial 1 port base address mapping
+*/
+ base_addr.as_uchar = 0;
+ SMC37c669_write_config(
+ SMC37c669_SERIAL0_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case SERIAL_1:
+ {
+ SMC37c669_SERIAL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_SERIAL_IRQ_REGISTER irq;
+/*
+** Disable the serial 2 IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+
+ irq.by_field.uart2_irq = 0;
+
+ SMC37c669_write_config( SMC37c669_SERIAL_IRQ_INDEX, irq.as_uchar );
+/*
+** Disable the serial 2 port base address mapping
+*/
+ base_addr.as_uchar = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_SERIAL1_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case PARALLEL_0:
+ {
+ SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+ SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Disable the parallel port DMA channel mapping
+*/
+ drq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+ drq.by_field.ppt_drq = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+ drq.as_uchar
+ );
+/*
+** Disable the parallel port IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+ irq.by_field.ppt_irq = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+ irq.as_uchar
+ );
+/*
+** Disable the parallel port base address mapping
+*/
+ base_addr.as_uchar = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case FLOPPY_0:
+ {
+ SMC37c669_FDC_BASE_ADDRESS_REGISTER base_addr;
+ SMC37c669_PARALLEL_FDC_IRQ_REGISTER irq;
+ SMC37c669_PARALLEL_FDC_DRQ_REGISTER drq;
+/*
+** Disable the floppy controller DMA channel mapping
+*/
+ drq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+
+ drq.by_field.fdc_drq = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_DRQ_INDEX,
+ drq.as_uchar
+ );
+/*
+** Disable the floppy controller IRQ mapping
+*/
+ irq.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+
+ irq.by_field.fdc_irq = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_PARALLEL_FDC_IRQ_INDEX,
+ irq.as_uchar
+ );
+/*
+** Disable the floppy controller base address mapping
+*/
+ base_addr.as_uchar = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_FDC_BASE_ADDRESS_INDEX,
+ base_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ case IDE_0:
+ {
+ SMC37c669_IDE_ADDRESS_REGISTER ide_addr;
+/*
+** Disable the IDE alternate status base address mapping
+*/
+ ide_addr.as_uchar = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX,
+ ide_addr.as_uchar
+ );
+/*
+** Disable the IDE controller base address mapping
+*/
+ ide_addr.as_uchar = 0;
+
+ SMC37c669_write_config(
+ SMC37c669_IDE_BASE_ADDRESS_INDEX,
+ ide_addr.as_uchar
+ );
+ ret_val = TRUE;
+ break;
+ }
+ }
+/*
+** Exit configuration mode and return
+*/
+ SMC37c669_config_mode( FALSE );
+
+ return ret_val;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function configures a device function within the
+** SMC37c669 Super I/O controller.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which device function
+**
+** port:
+** I/O port for the function to use
+**
+** irq:
+** IRQ for the device function to use
+**
+** drq:
+** DMA channel for the device function to use
+**
+** RETURN VALUE:
+**
+** Returns TRUE if the device function was configured,
+** otherwise, FALSE.
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+** DESIGN:
+**
+** If this function returns TRUE, the local shadow copy of
+** the configuration is also updated. If the device function
+** is currently disabled, only the local shadow copy is
+** updated and the actual device function will be updated
+** if/when is is enabled.
+**
+**--
+*/
+unsigned int SMC37c669_configure_device (
+ unsigned int func,
+ int port,
+ int irq,
+ int drq )
+{
+ struct DEVICE_CONFIG *cp;
+
+/*
+** Check for a valid configuration
+*/
+ if ( ( cp = SMC37c669_get_config ( func ) ) != NULL ) {
+/*
+** Configuration is valid, update the local shadow copy
+*/
+ if ( ( drq & ~0xFF ) == 0 ) {
+ cp->drq = drq;
+ }
+ if ( ( irq & ~0xFF ) == 0 ) {
+ cp->irq = irq;
+ }
+ if ( ( port & ~0xFFFF ) == 0 ) {
+ cp->port1 = port;
+ }
+/*
+** If the device function is enabled, update the actual
+** device configuration.
+*/
+ if ( SMC37c669_is_device_enabled( func ) ) {
+ SMC37c669_enable_device( func );
+ }
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function determines whether a device function
+** within the SMC37c669 controller is enabled.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which device function
+**
+** RETURN VALUE:
+**
+** Returns TRUE if the device function is enabled, otherwise, FALSE
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+** DESIGN:
+**
+** To check whether a device is enabled we will only look at
+** the port base address mapping. According to the SMC37c669
+** specification, all of the port base address mappings are
+** disabled if the addr<9:8> (bits <7:6> of the register) are
+** zero.
+**
+**--
+*/
+static unsigned int SMC37c669_is_device_enabled ( unsigned int func )
+{
+ unsigned char base_addr = 0;
+ unsigned int dev_ok = FALSE;
+ unsigned int ret_val = FALSE;
+/*
+** Enter configuration mode
+*/
+ SMC37c669_config_mode( TRUE );
+
+ switch ( func ) {
+ case SERIAL_0:
+ base_addr =
+ SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
+ dev_ok = TRUE;
+ break;
+ case SERIAL_1:
+ base_addr =
+ SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
+ dev_ok = TRUE;
+ break;
+ case PARALLEL_0:
+ base_addr =
+ SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
+ dev_ok = TRUE;
+ break;
+ case FLOPPY_0:
+ base_addr =
+ SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
+ dev_ok = TRUE;
+ break;
+ case IDE_0:
+ base_addr =
+ SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
+ dev_ok = TRUE;
+ break;
+ }
+/*
+** If we have a valid device, check base_addr<7:6> to see if the
+** device is enabled (mapped).
+*/
+ if ( ( dev_ok ) && ( ( base_addr & 0xC0 ) != 0 ) ) {
+/*
+** The mapping is not disabled, so assume that the function is
+** enabled.
+*/
+ ret_val = TRUE;
+ }
+/*
+** Exit configuration mode
+*/
+ SMC37c669_config_mode( FALSE );
+
+ return ret_val;
+}
+
+
+#if 0
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function retrieves the configuration information of a
+** device function within the SMC37c699 Super I/O controller.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which device function
+**
+** port:
+** I/O port returned
+**
+** irq:
+** IRQ returned
+**
+** drq:
+** DMA channel returned
+**
+** RETURN VALUE:
+**
+** Returns TRUE if the device configuration was successfully
+** retrieved, otherwise, FALSE.
+**
+** SIDE EFFECTS:
+**
+** The data pointed to by the port, irq, and drq parameters
+** my be modified even if the configuration is not successfully
+** retrieved.
+**
+** DESIGN:
+**
+** The device configuration is fetched from the local shadow
+** copy. Any unused parameters will be set to -1. Any
+** parameter which is not desired can specify the NULL
+** pointer.
+**
+**--
+*/
+static unsigned int SMC37c669_get_device_config (
+ unsigned int func,
+ int *port,
+ int *irq,
+ int *drq )
+{
+ struct DEVICE_CONFIG *cp;
+ unsigned int ret_val = FALSE;
+/*
+** Check for a valid device configuration
+*/
+ if ( ( cp = SMC37c669_get_config( func ) ) != NULL ) {
+ if ( drq != NULL ) {
+ *drq = cp->drq;
+ ret_val = TRUE;
+ }
+ if ( irq != NULL ) {
+ *irq = cp->irq;
+ ret_val = TRUE;
+ }
+ if ( port != NULL ) {
+ *port = cp->port1;
+ ret_val = TRUE;
+ }
+ }
+ return ret_val;
+}
+#endif
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function displays the current state of the SMC37c699
+** Super I/O controller's device functions.
+**
+** FORMAL PARAMETERS:
+**
+** None
+**
+** RETURN VALUE:
+**
+** None
+**
+** SIDE EFFECTS:
+**
+** None
+**
+**--
+*/
+void SMC37c669_display_device_info ( void )
+{
+ if ( SMC37c669_is_device_enabled( SERIAL_0 ) ) {
+ printk( " Serial 0: Enabled [ Port 0x%x, IRQ %d ]\n",
+ local_config[ SERIAL_0 ].port1,
+ local_config[ SERIAL_0 ].irq
+ );
+ }
+ else {
+ printk( " Serial 0: Disabled\n" );
+ }
+
+ if ( SMC37c669_is_device_enabled( SERIAL_1 ) ) {
+ printk( " Serial 1: Enabled [ Port 0x%x, IRQ %d ]\n",
+ local_config[ SERIAL_1 ].port1,
+ local_config[ SERIAL_1 ].irq
+ );
+ }
+ else {
+ printk( " Serial 1: Disabled\n" );
+ }
+
+ if ( SMC37c669_is_device_enabled( PARALLEL_0 ) ) {
+ printk( " Parallel: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
+ local_config[ PARALLEL_0 ].port1,
+ local_config[ PARALLEL_0 ].irq,
+ local_config[ PARALLEL_0 ].drq
+ );
+ }
+ else {
+ printk( " Parallel: Disabled\n" );
+ }
+
+ if ( SMC37c669_is_device_enabled( FLOPPY_0 ) ) {
+ printk( " Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
+ local_config[ FLOPPY_0 ].port1,
+ local_config[ FLOPPY_0 ].irq,
+ local_config[ FLOPPY_0 ].drq
+ );
+ }
+ else {
+ printk( " Floppy Ctrl: Disabled\n" );
+ }
+
+ if ( SMC37c669_is_device_enabled( IDE_0 ) ) {
+ printk( " IDE 0: Enabled [ Port 0x%x, IRQ %d ]\n",
+ local_config[ IDE_0 ].port1,
+ local_config[ IDE_0 ].irq
+ );
+ }
+ else {
+ printk( " IDE 0: Disabled\n" );
+ }
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function puts the SMC37c669 Super I/O controller into,
+** and takes it out of, configuration mode.
+**
+** FORMAL PARAMETERS:
+**
+** enable:
+** TRUE to enter configuration mode, FALSE to exit.
+**
+** RETURN VALUE:
+**
+** None
+**
+** SIDE EFFECTS:
+**
+** The SMC37c669 controller may be left in configuration mode.
+**
+**--
+*/
+static void SMC37c669_config_mode(
+ unsigned int enable )
+{
+ if ( enable ) {
+/*
+** To enter configuration mode, two writes in succession to the index
+** port are required. If a write to another address or port occurs
+** between these two writes, the chip does not enter configuration
+** mode. Therefore, a spinlock is placed around the two writes to
+** guarantee that they complete uninterrupted.
+*/
+ spinlock( &spl_atomic );
+ wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
+ wb( &SMC37c669->index_port, SMC37c669_CONFIG_ON_KEY );
+ spinunlock( &spl_atomic );
+ }
+ else {
+ wb( &SMC37c669->index_port, SMC37c669_CONFIG_OFF_KEY );
+ }
+}
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function reads an SMC37c669 Super I/O controller
+** configuration register. This function assumes that the
+** device is already in configuration mode.
+**
+** FORMAL PARAMETERS:
+**
+** index:
+** Index value of configuration register to read
+**
+** RETURN VALUE:
+**
+** Data read from configuration register
+**
+** SIDE EFFECTS:
+**
+** None
+**
+**--
+*/
+static unsigned char SMC37c669_read_config(
+ unsigned char index )
+{
+ unsigned char data;
+
+ wb( &SMC37c669->index_port, index );
+ data = rb( &SMC37c669->data_port );
+ return data;
+}
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function writes an SMC37c669 Super I/O controller
+** configuration register. This function assumes that the
+** device is already in configuration mode.
+**
+** FORMAL PARAMETERS:
+**
+** index:
+** Index of configuration register to write
+**
+** data:
+** Data to be written
+**
+** RETURN VALUE:
+**
+** None
+**
+** SIDE EFFECTS:
+**
+** None
+**
+**--
+*/
+static void SMC37c669_write_config(
+ unsigned char index,
+ unsigned char data )
+{
+ wb( &SMC37c669->index_port, index );
+ wb( &SMC37c669->data_port, data );
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function initializes the local device
+** configuration storage. This function assumes
+** that the device is already in configuration
+** mode.
+**
+** FORMAL PARAMETERS:
+**
+** None
+**
+** RETURN VALUE:
+**
+** None
+**
+** SIDE EFFECTS:
+**
+** Local storage for device configuration information
+** is initialized.
+**
+**--
+*/
+static void SMC37c669_init_local_config ( void )
+{
+ SMC37c669_SERIAL_BASE_ADDRESS_REGISTER uart_base;
+ SMC37c669_SERIAL_IRQ_REGISTER uart_irqs;
+ SMC37c669_PARALLEL_BASE_ADDRESS_REGISTER ppt_base;
+ SMC37c669_PARALLEL_FDC_IRQ_REGISTER ppt_fdc_irqs;
+ SMC37c669_PARALLEL_FDC_DRQ_REGISTER ppt_fdc_drqs;
+ SMC37c669_FDC_BASE_ADDRESS_REGISTER fdc_base;
+ SMC37c669_IDE_ADDRESS_REGISTER ide_base;
+ SMC37c669_IDE_ADDRESS_REGISTER ide_alt;
+
+/*
+** Get serial port 1 base address
+*/
+ uart_base.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL0_BASE_ADDRESS_INDEX );
+/*
+** Get IRQs for serial ports 1 & 2
+*/
+ uart_irqs.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL_IRQ_INDEX );
+/*
+** Store local configuration information for serial port 1
+*/
+ local_config[SERIAL_0].port1 = uart_base.by_field.addr9_3 << 3;
+ local_config[SERIAL_0].irq =
+ SMC37c669_xlate_irq(
+ SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart1_irq )
+ );
+/*
+** Get serial port 2 base address
+*/
+ uart_base.as_uchar =
+ SMC37c669_read_config( SMC37c669_SERIAL1_BASE_ADDRESS_INDEX );
+/*
+** Store local configuration information for serial port 2
+*/
+ local_config[SERIAL_1].port1 = uart_base.by_field.addr9_3 << 3;
+ local_config[SERIAL_1].irq =
+ SMC37c669_xlate_irq(
+ SMC37c669_DEVICE_IRQ( uart_irqs.by_field.uart2_irq )
+ );
+/*
+** Get parallel port base address
+*/
+ ppt_base.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL0_BASE_ADDRESS_INDEX );
+/*
+** Get IRQs for parallel port and floppy controller
+*/
+ ppt_fdc_irqs.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_IRQ_INDEX );
+/*
+** Get DRQs for parallel port and floppy controller
+*/
+ ppt_fdc_drqs.as_uchar =
+ SMC37c669_read_config( SMC37c669_PARALLEL_FDC_DRQ_INDEX );
+/*
+** Store local configuration information for parallel port
+*/
+ local_config[PARALLEL_0].port1 = ppt_base.by_field.addr9_2 << 2;
+ local_config[PARALLEL_0].irq =
+ SMC37c669_xlate_irq(
+ SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.ppt_irq )
+ );
+ local_config[PARALLEL_0].drq =
+ SMC37c669_xlate_drq(
+ SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.ppt_drq )
+ );
+/*
+** Get floppy controller base address
+*/
+ fdc_base.as_uchar =
+ SMC37c669_read_config( SMC37c669_FDC_BASE_ADDRESS_INDEX );
+/*
+** Store local configuration information for floppy controller
+*/
+ local_config[FLOPPY_0].port1 = fdc_base.by_field.addr9_4 << 4;
+ local_config[FLOPPY_0].irq =
+ SMC37c669_xlate_irq(
+ SMC37c669_DEVICE_IRQ( ppt_fdc_irqs.by_field.fdc_irq )
+ );
+ local_config[FLOPPY_0].drq =
+ SMC37c669_xlate_drq(
+ SMC37c669_DEVICE_DRQ( ppt_fdc_drqs.by_field.fdc_drq )
+ );
+/*
+** Get IDE controller base address
+*/
+ ide_base.as_uchar =
+ SMC37c669_read_config( SMC37c669_IDE_BASE_ADDRESS_INDEX );
+/*
+** Get IDE alternate status base address
+*/
+ ide_alt.as_uchar =
+ SMC37c669_read_config( SMC37c669_IDE_ALTERNATE_ADDRESS_INDEX );
+/*
+** Store local configuration information for IDE controller
+*/
+ local_config[IDE_0].port1 = ide_base.by_field.addr9_4 << 4;
+ local_config[IDE_0].port2 = ide_alt.by_field.addr9_4 << 4;
+ local_config[IDE_0].irq = 14;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function returns a pointer to the local shadow
+** configuration of the requested device function.
+**
+** FORMAL PARAMETERS:
+**
+** func:
+** Which device function
+**
+** RETURN VALUE:
+**
+** Returns a pointer to the DEVICE_CONFIG structure for the
+** requested function, otherwise, NULL.
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+**--
+*/
+static struct DEVICE_CONFIG *SMC37c669_get_config( unsigned int func )
+{
+ struct DEVICE_CONFIG *cp = NULL;
+
+ switch ( func ) {
+ case SERIAL_0:
+ cp = &local_config[ SERIAL_0 ];
+ break;
+ case SERIAL_1:
+ cp = &local_config[ SERIAL_1 ];
+ break;
+ case PARALLEL_0:
+ cp = &local_config[ PARALLEL_0 ];
+ break;
+ case FLOPPY_0:
+ cp = &local_config[ FLOPPY_0 ];
+ break;
+ case IDE_0:
+ cp = &local_config[ IDE_0 ];
+ break;
+ }
+ return cp;
+}
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function translates IRQs back and forth between ISA
+** IRQs and SMC37c669 device IRQs.
+**
+** FORMAL PARAMETERS:
+**
+** irq:
+** The IRQ to translate
+**
+** RETURN VALUE:
+**
+** Returns the translated IRQ, otherwise, returns -1.
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+**--
+*/
+static int SMC37c669_xlate_irq ( unsigned int irq )
+{
+ int i, translated_irq = -1;
+
+ if ( SMC37c669_IS_DEVICE_IRQ( irq ) ) {
+/*
+** We are translating a device IRQ to an ISA IRQ
+*/
+ for ( i = 0; ( SMC37c669_irq_table[i].device_irq != -1 ) || ( SMC37c669_irq_table[i].isa_irq != -1 ); i++ ) {
+ if ( irq == SMC37c669_irq_table[i].device_irq ) {
+ translated_irq = SMC37c669_irq_table[i].isa_irq;
+ break;
+ }
+ }
+ }
+ else {
+/*
+** We are translating an ISA IRQ to a device IRQ
+*/
+ for ( i = 0; ( SMC37c669_irq_table[i].isa_irq != -1 ) || ( SMC37c669_irq_table[i].device_irq != -1 ); i++ ) {
+ if ( irq == SMC37c669_irq_table[i].isa_irq ) {
+ translated_irq = SMC37c669_irq_table[i].device_irq;
+ break;
+ }
+ }
+ }
+ return translated_irq;
+}
+
+
+/*
+**++
+** FUNCTIONAL DESCRIPTION:
+**
+** This function translates DMA channels back and forth between
+** ISA DMA channels and SMC37c669 device DMA channels.
+**
+** FORMAL PARAMETERS:
+**
+** drq:
+** The DMA channel to translate
+**
+** RETURN VALUE:
+**
+** Returns the translated DMA channel, otherwise, returns -1
+**
+** SIDE EFFECTS:
+**
+** {@description or none@}
+**
+**--
+*/
+static int SMC37c669_xlate_drq ( unsigned int drq )
+{
+ int i, translated_drq = -1;
+
+ if ( SMC37c669_IS_DEVICE_DRQ( drq ) ) {
+/*
+** We are translating a device DMA channel to an ISA DMA channel
+*/
+ for ( i = 0; ( SMC37c669_drq_table[i].device_drq != -1 ) || ( SMC37c669_drq_table[i].isa_drq != -1 ); i++ ) {
+ if ( drq == SMC37c669_drq_table[i].device_drq ) {
+ translated_drq = SMC37c669_drq_table[i].isa_drq;
+ break;
+ }
+ }
+ }
+ else {
+/*
+** We are translating an ISA DMA channel to a device DMA channel
+*/
+ for ( i = 0; ( SMC37c669_drq_table[i].isa_drq != -1 ) || ( SMC37c669_drq_table[i].device_drq != -1 ); i++ ) {
+ if ( drq == SMC37c669_drq_table[i].isa_drq ) {
+ translated_drq = SMC37c669_drq_table[i].device_drq;
+ break;
+ }
+ }
+ }
+ return translated_drq;
+}
+
+#if 0
+int smcc669_init ( void )
+{
+ struct INODE *ip;
+
+ allocinode( smc_ddb.name, 1, &ip );
+ ip->dva = &smc_ddb;
+ ip->attr = ATTR$M_WRITE | ATTR$M_READ;
+ ip->len[0] = 0x30;
+ ip->misc = 0;
+ INODE_UNLOCK( ip );
+
+ return msg_success;
+}
+
+int smcc669_open( struct FILE *fp, char *info, char *next, char *mode )
+{
+ struct INODE *ip;
+/*
+** Allow multiple readers but only one writer. ip->misc keeps track
+** of the number of writers
+*/
+ ip = fp->ip;
+ INODE_LOCK( ip );
+ if ( fp->mode & ATTR$M_WRITE ) {
+ if ( ip->misc ) {
+ INODE_UNLOCK( ip );
+ return msg_failure; /* too many writers */
+ }
+ ip->misc++;
+ }
+/*
+** Treat the information field as a byte offset
+*/
+ *fp->offset = xtoi( info );
+ INODE_UNLOCK( ip );
+
+ return msg_success;
+}
+
+int smcc669_close( struct FILE *fp )
+{
+ struct INODE *ip;
+
+ ip = fp->ip;
+ if ( fp->mode & ATTR$M_WRITE ) {
+ INODE_LOCK( ip );
+ ip->misc--;
+ INODE_UNLOCK( ip );
+ }
+ return msg_success;
+}
+
+int smcc669_read( struct FILE *fp, int size, int number, unsigned char *buf )
+{
+ int i;
+ int length;
+ int nbytes;
+ struct INODE *ip;
+
+/*
+** Always access a byte at a time
+*/
+ ip = fp->ip;
+ length = size * number;
+ nbytes = 0;
+
+ SMC37c669_config_mode( TRUE );
+ for ( i = 0; i < length; i++ ) {
+ if ( !inrange( *fp->offset, 0, ip->len[0] ) )
+ break;
+ *buf++ = SMC37c669_read_config( *fp->offset );
+ *fp->offset += 1;
+ nbytes++;
+ }
+ SMC37c669_config_mode( FALSE );
+ return nbytes;
+}
+
+int smcc669_write( struct FILE *fp, int size, int number, unsigned char *buf )
+{
+ int i;
+ int length;
+ int nbytes;
+ struct INODE *ip;
+/*
+** Always access a byte at a time
+*/
+ ip = fp->ip;
+ length = size * number;
+ nbytes = 0;
+
+ SMC37c669_config_mode( TRUE );
+ for ( i = 0; i < length; i++ ) {
+ if ( !inrange( *fp->offset, 0, ip->len[0] ) )
+ break;
+ SMC37c669_write_config( *fp->offset, *buf );
+ *fp->offset += 1;
+ buf++;
+ nbytes++;
+ }
+ SMC37c669_config_mode( FALSE );
+ return nbytes;
+}
+#endif
+
+void
+SMC37c669_dump_registers(void)
+{
+ int i;
+ for (i = 0; i <= 0x29; i++)
+ printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
+}
+/*+
+ * ============================================================================
+ * = SMC_init - SMC37c669 Super I/O controller initialization =
+ * ============================================================================
+ *
+ * OVERVIEW:
+ *
+ * This routine configures and enables device functions on the
+ * SMC37c669 Super I/O controller.
+ *
+ * FORM OF CALL:
+ *
+ * SMC_init( );
+ *
+ * RETURNS:
+ *
+ * Nothing
+ *
+ * ARGUMENTS:
+ *
+ * None
+ *
+ * SIDE EFFECTS:
+ *
+ * None
+ *
+-*/
+void SMC669_Init ( void )
+{
+ SMC37c669_CONFIG_REGS *SMC_base;
+
+ if ( ( SMC_base = SMC37c669_detect( ) ) != NULL ) {
+ printk( "SMC37c669 Super I/O Controller found @ 0x%lx\n",
+ (unsigned long) SMC_base );
+#if SMC_DEBUG
+ SMC37c669_config_mode( TRUE );
+ SMC37c669_dump_registers( );
+ SMC37c669_config_mode( FALSE );
+ SMC37c669_display_device_info( );
+#endif
+ SMC37c669_disable_device( SERIAL_0 );
+ SMC37c669_configure_device(
+ SERIAL_0,
+ COM1_BASE,
+ COM1_IRQ,
+ -1
+ );
+ SMC37c669_enable_device( SERIAL_0 );
+
+ SMC37c669_disable_device( SERIAL_1 );
+ SMC37c669_configure_device(
+ SERIAL_1,
+ COM2_BASE,
+ COM2_IRQ,
+ -1
+ );
+ SMC37c669_enable_device( SERIAL_1 );
+
+ SMC37c669_disable_device( PARALLEL_0 );
+ SMC37c669_configure_device(
+ PARALLEL_0,
+ PARP_BASE,
+ PARP_IRQ,
+ PARP_DRQ
+ );
+ SMC37c669_enable_device( PARALLEL_0 );
+
+ SMC37c669_disable_device( FLOPPY_0 );
+ SMC37c669_configure_device(
+ FLOPPY_0,
+ FDC_BASE,
+ FDC_IRQ,
+ FDC_DRQ
+ );
+ SMC37c669_enable_device( FLOPPY_0 );
+
+ SMC37c669_disable_device( IDE_0 );
+
+#if SMC_DEBUG
+ SMC37c669_config_mode( TRUE );
+ SMC37c669_dump_registers( );
+ SMC37c669_config_mode( FALSE );
+ SMC37c669_display_device_info( );
+#endif
+ }
+ else {
+#if SMC_DEBUG
+ printk( "No SMC37c669 Super I/O Controller found\n" );
+#endif
+ }
+}
+
+#endif /* SX164 */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov