From Esondrmn@aol.com Fri Nov 17 10:13 MST 1995
From: Esondrmn@aol.com
>Received: from mail02.mail.aol.com (mail02.mail.aol.com [152.163.172.66]) by uucp-1.csn.net (8.6.12/8.6.12) with ESMTP id JAA16325 for <tesla@grendel.objinc.com>; Fri, 17 Nov 1995 09:54:51 -0700
Date: Fri, 17 Nov 1995 11:53:13 -0500
To: tesla@grendel.objinc.com, KLINEDA@univscvm.csd.scarolina.edu,
        QUANTUM@univscvm.csd.scarolina.edu, WMEYER@scientia.up.ac.za,
        bhaley@shore.net, frerichs@zfe.siemens.de, froula@cig.mot.com,
        haba@snakemail.hut.fi, jetter@ix.netcom.com, scott@csustan.csustan.edu
Subject: Re: Power curve

In a message dated 95-11-17 04:44:31 EST, tesla@grendel.objinc.com writes:

>
>The 25 feet was had with 18KV charging 0.2uf (too big).  I was also getting 
>1KW / foot efficiency up to about 25KW.  Above that, I was just melting
>metal. 
> The capacitor was made of two 0.1uf/35KVAC caps in parallel.  The power was

>fed across the gap.
>
>The coil is very large.  It is 4ft in diameter and 11ft tall (winding).  It
>is 
>wound with 5500ft of 14awg, 40KV silicone HV wire which had liquid silicone 
>being poured on it while winding (all very expensive).  The upper terminal
is
>
>a circle of seven 20in aluminum spheres forming a piecewise approximation of
>a 
>7 ft torus.  They connect via pipes to a central sphere.  The whole thing 
>stands 2 stories tall.  The coil with power supply live on an 18x8ft
trailer.
>
>The coil assembly is raised hydraulically with an on-board gantry system and

>then the trailer is driven away.  Some day when I get a scanner, I'll post 
>some pictures of the beast.
>
>>I think you are correct, the only way to increase the output from my
present
>>system is by raising the input voltage.  This is difficult since I have a
>>14,400 volt pole pig and a 15,000 working voltage primary capacitor.
>
>You are up against the usual problem.
>
>Zap,
>Mark
>
>

Mark,

Sounds like a very impressive project.  I would like to see it run some day.
 Do you have any video?

Ed Sonderman


